RUC extranjero

Tenia la siguiente consulta en el socio de negocios tenemos empresas Peruanas que su coidgo es 11 digitos (que es el RUC), empresas ecuatorianas que tienen 13 digitos
y ahora tenemos empresas brasileñas que tienen 14 digitos pero no me deja ingresar en el socio de negocio como puedo ampliarle el campo.
mi codigo va de la sgte manera: C(RUC de la empresa)

Estimado,
Me temo que no es posible ampliar el tamaño del CODIGO del SN (15 caracteres), en el campo RUT o numero de identificacion Fiscal tienes la posibilidad de 32 caracteres, lo que puedes hacer es crear un codigo màs corto de 15 caracteres maximo y en el campo RUT colocar el numero como tal.
Saludos,
JAMS

Similar Messages

Incluir profesionales al modelo 296 para extranjeros.

Hola,
¿Sabéis si se puede incluir en el modelo 216 la información económica de los extranjeros que tienen ficha de proveedor marcando la casilla de "Datos de contabilidad" del programa RPC190E0?
Me refiero a preparar la tabla QSTRE como para el modelo 190.
¿Alguna indicación?
Saludos y gracias.

Hola franciscoufa que tal,
Debes conectar el disco a su lugar anterior si quieres que levante el sistema.
Las opciones de restauración son lo útiles para la HDD, debes clonar pero mucho rollo hacer todo esto, puedes intentar una instalación limpia https://forums.lenovo.com/t5/Windows-Base-de-conocimientos/Crear-medios-de-instalaci%C3%B3n-Windows-8-1-descargar-imagen-de/ta-p/1791521
Es una imagen para Windows 8.1 pero funcional con tu ordenador.
Un saludo.

Modelo 340 España. Compra proveedor extranjero

Buenos días,
tengo dudas en el registro de operaciones de compra a un proveedor extranjero y que estas se trasladen correctamente al fichero del modelo 340.
Supongamos el siguiente ejemplo:
Compro a un proveedor extranjero por 100.000€
El transitario declara una base de 130.000€. Gastos de gestión del transitario de 1.000€.
¿alguien me puede detallar como introducir las operaciones y que estas queden correctamente reflejadas en el modelo 340?
Gracias

Hi,
This is SAP Business one forum for English user. Please find correct forum and repost your question to get quick answer.
Kindly close this thread here.
Thanks & Regards,
Nagarajan

Tributación personal que realiza trabajos en el extranjero durante 180 días.

Hola,
Los empleados que trabajan fuera del país durante 180 días tienen derecho a estar exentos de pagar impuestos y sus retribuciones pueden cargarse a clave L subclave 15. ¿Pero como se puede hacer esto de forma directa?. El infotipo 0062 tiene un campo para la subclave, pero solo es de una posición ¿?. ¿Hay manera de poder hacer la asignación?, ¿Alguien conoce una alternativa?
Gracias y saludos.

Gracias Gemma por tu respuesta tan rápida. Pero el problema es que el trabajador no cobra conceptos específicos por trabajar fuera del país, sino que cobra los mismos que el resto de empleados que no se mueven; por los tanto los conceptos no podemos asignarlos a clave L. Para esto deberíamos duplicar conceptos, y esto nos lo planteamos como una última solución; ya que duplicar conceptos en algún caso significa duplicar tratamientos. No se si hay una solución a nivel de persona.
Saludos.
Enric.

Como devolver un equipo desde el extranjero

Encontre un iphone 5 en un taxi en Lima - Peru. Al chequear el IMei me sale que el equipo es de EEUU pero obviamente no se quien es el propietario. Como hacver que At&t le informe eso y me diga a donde enviarlo o que se puede hacer?

Hola @jusancruz
Gracias por tu publicación y por querer regresar este teléfono.
Por el momento la única manera de regresar un aparato es llevándolo a una de nuestras tiendas corporativas.
Como tú vives en Perú, la otro opción sería que la mandaras por envió internacional.
Favor de avisarnos si tienes alguna otra duda o pregunta.
Gracias,
Charise

Upload data from excel into database through pl/sql

Hi All,
I have excel which contains data lets say employee details,
I have one upload button ,which is used to upload excel and then i want to map the cell of excel to the database column and through plsql code i want to upload the excel data into database.
In short ,i want to upload the data from excel into database using plsql code,
or suggest me any other way to do this.(except the data load method present in apex)
Thanks,
Jitendra

if you use APEX 4 you can define you own table
the code below is for APEX 3
PROCEDURE pro_carga_planilla_prosp( p_archivo VARCHAR2) IS
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows number;
v_sr_no number := 1;
v_ok boolean := true;
v_local_ok BOOLEAN := TRUE;
v_reg_ok NUMBER := 0;
v_reg_ko NUMBER := 0;
v_localidad_id NUMBER;
v_departamento_id NUMBER;
v_cargo_id NUMBER;
v_prospecto_id NUMBER;
v_asesor_id NUMBER;
V_REG prospectos%rowtype;
BEGIN
-- Read data from wwv_flow_files</span>
select blob_content into v_blob_data
from wwv_flow_files
where name= p_archivo;
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char</span>
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
-- pro_log('linea '||v_line);
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved </span>
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities </span>
v_line := replace(REPLACE (v_line, ',', ':'), ';',':');
v_line := replace(replace(v_line, chr(10)),chr(13));
if substr(v_line,1,1)= ':' then
v_line := '0'||v_line;
end if;
if instr(v_line,':',1,21) = 0 then
if instr(v_line,':',1,20) = 0 then
v_line:=v_line||':';
end if;
v_line:=v_line||':';
end if;
-- pro_log(v_line);
-- Convert each column separated by : into array of data </span>
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table </span>
IF v_data_array(1) IS NOT NULL AND
v_sr_no <> 1 THEN
V_REG.NOMBRE:=ltrim(rtrim(v_data_array(2)));
V_REG.RAZON_SOCIAL:=v_data_array(3);
V_REG.DIRECCION := v_data_array(4)||' '||v_data_array(5);
-- PRO_LOG('PROSP 1 ' ||v_sr_no);
v_localidad_id := pack_empresas.get_localidad(v_data_array(6));
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
V_REG.LOCALIDAD_ID:=v_localidad_id;
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
V_REG.CODIGO_POSTAL:=LTRIM(RTRIM(v_data_array(7)) );
-- PRO_LOG('PROSP 1.3 '||v_sr_no);
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
v_departamento_id := pack_empresas.get_departamento(v_data_array(8));
-- PRO_LOG('PROSP 1.4 '||v_sr_no);
V_REG.DEPARTAMENTO_ID:=v_departamento_id;
-- PRO_LOG('PROSP 1.5 '||v_sr_no);
V_REG.TELEFONO:=v_data_array(9);
--PRO_LOG('PROSP 1.6 '||v_sr_no);
V_REG.TELEFONO2:=v_data_array(10);
-- PRO_LOG('PROSP 1.7 '||v_sr_no);
V_REG.RUBRO:=v_data_array(11);
-- PRO_LOG('PROSP 1.8 '||v_sr_no);
V_REG.RUC:=ltrim(rtrim(v_data_array(12)));
-- PRO_LOG('PROSP 1.9 '||v_sr_no);
-- pro_log(v_data_array(1));
-- pro_log(v_data_array(2));
V_REG.CANTIDAD_EMPLEADOS:=RTRIM(LTRIM(v_data_array(13)));
-- PRO_LOG('PROSP 1.10 '||v_sr_no);
-- pro_log(v_data_array(14));
V_REG.CANTIDAD_BENEFICIARIOS:=RTRIM(LTRIM(v_data_array(14)));
--PRO_LOG('PROSP 1.11 '||v_sr_no);
V_REG.MAIL:=v_data_array(19);
-- pro_log(V_REG.MAIL);
-- PRO_LOG('PROSP 1.12 '||v_sr_no);
-- v_data_array(20):= replace(replace(v_data_array(20),chr(10)),chr(13));
if not v_data_array.exists(20) then
-- pro_log('existe');
-- pro_log(ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13)))));
V_REG.Proveedor:= ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13))));
else
v_data_array(20):=null;
end if;
-- V_REG.PROVEEDOR:=v_data_array(20);
-- PRO_LOG('PROSP 1.13 '||v_sr_no);
if not v_data_array.exists(21) then
V_REG.OBSERVACIONES:=v_data_array(21);
else
v_data_array(21):=null;
end if;
-- PRO_LOG('PROSP 1.14 '||v_sr_no);
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
insert into prospectos (nombre,razon_social, direccion,localidad_id,codigo_postal,
departamento_id, telefono, telefono2, rubro,ruc,cantidad_empleados,
cantidad_beneficiarios,mail,proveedor,observaciones)
values (nvl(ltrim(rtrim(v_data_array(2))),v_data_array(3)), v_data_array(3),
v_data_array(4)||' '||v_data_array(5),
v_localidad_id, LTRIM(RTRIM(v_data_array(7))),v_departamento_id, v_data_array(9),
v_data_array(10),v_data_array(11), ltrim(rtrim(v_data_array(12))), RTRIM(LTRIM(v_data_array(13))),
RTRIM(LTRIM(v_data_array(14))),v_data_array(19),v_data_array(20), v_data_array(21))
returning prospecto_id INTO v_prospecto_id;
-- PRO_LOG('PROSP 2');
v_cargo_id := pack_empresas.get_cargo(v_data_array(17));
-- PRO_LOG('PROSP 3');
insert into prospecto_contactos (prospecto_id,nombre,apellido,cargo_id,
telefono,mail)
values (v_prospecto_id, nvl(v_data_array(15),'S/N'), nvl(v_data_array(16),'S/A'),
v_cargo_id, v_data_array(18), v_data_array(19));
-- PRO_LOG('PROSP 4');
v_asesor_id := pack_empresas.get_asesor(v_data_array(1));
-- PRO_LOG('PROSP 5');
insert into asignaciones (prospecto_id,asesor_id,fecha_asignacion)
values (v_prospecto_id, v_asesor_id, trunc(sysdate));
-- PRO_LOG('PROSP 6');
END IF;
-- Clear out
v_line := NULL;
v_sr_no := v_sr_no + 1;
END IF;
END LOOP;
delete wwv_flow_files
where name= p_archivo;
END pro_carga_planilla_prosp;
function hex_to_decimal
--this function is based on one by Connor McDonald
--http://www.jlcomp.demon.co.uk/faq/base_convert.html
( p_hex_str in varchar2 ) return number
is
v_dec number;
v_hex varchar2(16) := '0123456789ABCDEF';
begin
v_dec := 0;
for indx in 1 .. length(p_hex_str)
loop
v_dec := v_dec * 16 + instr(v_hex,upper(substr(p_hex_str,indx,1)))-1;
end loop;
return v_dec;
end hex_to_decimal;

Problem with XML in APEX ORA-06502

i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
declare
l_XML varchar2(32767);
begin
select xmlElement
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("razonSocial", J.RAZON_SOCIAL),
xmlElement("idRepre", J.ID_REPRE),
xmlElement("rucContador", J.RUC_CONTADOR),
xmlElement("anio", J.ANIO),
xmlElement("mes", J.MES),
xmlElement
"compras",
select xmlAgg
xmlElement
"detalleCompra",
--xmlAttributes(K.ID_COMPRA as "COMPRA"),
xmlForest
K.COD_SUSTENTO as "codSustento",
K.TPLD_PROV as "tpldProv",
K.ID_PROV as "idProv",
K.TIPO_COMPROBANTE as "tipoComprobante",
to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
K.ESTABLECIMIENTO as "establecimiento",
K.PUNTO_EMISION as "puntoEmision",
K.SECUENCIAL as "secuencial",
to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
K.AUTORIZACION as "autorizacion",
to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
xmlElement
"air",
select xmlAgg
xmlElement
"detalleAir",
xmlForest
P.COD_RET_AIR as "codRetAir",
to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
from ANEXO_COMPRAS P
where P.ID_COMPRA = K.ID_COMPRA
AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
AND K.ID BETWEEN 1 AND 25
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
declare
l_XML CLOB;
begin
--Oculta XML
sys.htp.init;
wwv_flow.g_page_text_generated := true;
wwv_flow.g_unrecoverable_error := true;
--select XML
select xmlElement
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

JohannaCevallos07 wrote:
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
Thanks

Hyperlink issue

Hi All,
I tried creating a hyperlink between 2 reports and pass parameters to other report. Below is error I get when we click on the Hyperlink ( Details text ), Please advise.
Main Report, Detail Report.
From Main Report , I am passing 3 parameters.
1) Customer Code : Reportfilter(CustomerCode)
2) Start Date: Min(CustomerDate)
3) End Date : Max(CustomerDate)
In the detail report we have 3 parameters,
1) CustomerCode
2) Customer Date between (StartDate) and (EndDate)
We are noticing this error only when there is a blank data.
Message was edited by: RUC .

Did you try to pass EMPTY_VALUE when there is a null ?

Error while running BW Query.

When I am running BW query I am using IE6.0 in the address bar it is showing
http://<b>luxbwd</b>.100.100.8:<b>8100</b>/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0QM_C11&QUERY=QUALITYLOT&VARIABLE_SCREEN=X&DUMMY=6
insted of http://<b>10</b>.100.100.8:<b>8100</b>/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0QM_C11&QUERY=QUALITYLOT&VARIABLE_SCREEN=X&DUMMY=6
How can I Change on the backend.Every time I am putting 10 in the place of luxbwd.
I have checked in Rz10 profile management.
icm/host_name_full                          10.100.100.8
abap/fieldexit                              yes
login/system_client                         201
login/fails_to_user_lock                    3
SAPSYSTEMNAME                               BWD
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             6
rdisp/wp_no_btc                             2
rdisp/wp_no_vb                              1
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
SAPGLOBALHOST                               luxbwd
PHYS_MEMSIZE                                2450
DIR_TRANS                                   E:\usr\sap\trans
icm/server_port_0                           PROT=HTTP,PORT=8080
DIR_CT_RUN                                  E:\usr\sap\BWD\SYS\exe\nuc\NtIa64
DIR_ORAHOME                                 E:\oracle\BWD\920_64
And I checked in SE37 also
on the Function module RSBB_URL_PREFIX_GET
The parameters are like following.
Import parameters               Value
I_HANDLERCLASS                  CL_RSR_WWW_HTTP
I_PROTOCOL
I_MESSAGESERVER
Export parameters               Value
E_URL_PREFIX                    http://10.100.100.8:8080
E_URL_PATH                      /sap/bw/BEx
E_URL_PROTOCOL                  http
E_URL_SERVER                    10.100.100.8
E_URL_PORT                      8080
E_SUBRC                         0
Please help me. Points will be assigned.
Regards
Lal

Dear Mr. Rucit.
I gone through the Notes which you given. Thanks for that.
but the problem is different.
on by server I can see on TC SE37 the program RSBB_URL_PREFIX_GET
the default is comming
E_URL_PREFIX                    http://luxbwd.100.100.8:8100
E_URL_PATH                      /sap/bw/BEx
E_URL_PROTOCOL                  http
E_URL_SERVER                    luxbwd.100.100.8
E_URL_PORT                      8100
E_SUBRC                         0
and if I am removing 'X' from I_MESSAGESERVER option
the parameter - values are comming correcit. that is,
E_URL_PREFIX                    http://10.100.100.8:8080
E_URL_PATH                      /sap/bw/BEx
E_URL_PROTOCOL                  http
E_URL_SERVER                    10.100.100.8
E_URL_PORT                      8080
E_SUBRC                         0
This is correct.
How can I change the default to this settings.
Please help
regards
Kariyath.

Error opening a pdf document in ie7

I have installed adobe reader. the OS is windows 7. When I open any PDF document using Internet Explorer 7, It stops with the message of Ruc time error. Message also shows there is error in c:\programfiles(x86)]internet explorer\iexplore.exe. When i select the link of PDF document for save as, the file types do not show pdf option.

rds@gvp wrote:
When i select the link of PDF document for save as, the file types do not show pdf option.
Doesn't it automatically save as a .pdf file? That's what I get using IE9.

How to find number of lines in an internal table

Dear all,
how to find number of records present in an internal table.

DESCRIBE TABLE
Syntax
DESCRIBE TABLE itab [KIND knd] [LINES lin] [OCCURS n].
Extras:
1. ... KIND knd
2. ... LINES lin
3. ... OCCURS n
Effect
This statement determines some properties of the internal table itab and assigns them to the specified variables. The various additions enable you to determine the table type, the number of currently filled rows and the initial memory requirement.
In addition, the system fields sy-tfill and sy-tleng are filled with the current number of table rows and the length of a table row in bytes.
Notes
For detailed information about an internal table, you should use the methods of RTTS of the DESCRIBE TABLE statement.
Without the specification of an addition, the statement DESCRIBE TABLE only sets the system fields sy-tfill and sy-tleng.
Addition 1
... KIND knd
Effect
The table type of the internal table itab is determined and a corresponding one-digit identification is assigned to the data object knd. A character-type data type is expected for the data object. The identifications are "T" for standard tables, "S" for sorted tables and "H" for hashed tables. These values are also defined as constants sydes_kind-standard, sydes_kind-sorted, and sydes_kind-hashed in the type group SYDES.
Addition 2
... LINES lin
Effect
The current number of table rows of the internal table itab is determined and is assigned to the data object lin.The data type i is expected for the data object.
Note
As of release 6.10, the current number of rows of an internal table can also be determined using the in-built function lines.
Addition 3
... OCCURS n
Effect
The initial memory requirement defined during the creation of the internal table with the addition INITIAL SIZE or the obsolete addition OCCURS is determined and assigned to the data object n. The data type i is expected for the data object.
Example
Descending sorting of a generically typed internal table in a subprogram. Since sorted tables cannot be sorted in a descending order, the table type is checked to avoid an exception that cannot be handled.
TYPE-POOLS sydes.
FORM sort_descending CHANGING itab TYPE ANY TABLE.
DATA tabkind(1) TYPE c.
DESCRIBE TABLE itab KIND tabkind.
IF tabkind = sydes_kind-standard OR
     tabkind = sydes_kind-hashed.
    SORT itab DESCENDING.
ELSEIF tabkind = sydes_kind-sorted.
    MESSAGE '...' TYPE 'E'.
ELSE.
    MESSAGE '...' TYPE 'E'.
ENDIF.
ENDFORM.
DESCRIBE FIELD INTO
Note
This statement is for internal use only.
It cannot be used in application programs.
Syntax
DESCRIBE FIELD dobj INTO td.
Effect
All characteristics of the field f, its components , sub-components etc. are displayed in the field td (type description). td has to be of the type SYDES_DESC, defined in Type Group SYDES. Because of this, the type group SYDES must be integrated into the ABAP-program with a TYPE-POOLS statement .
The structure SYDES_DESC has two table-type components TYPES and NAMES:
In TYPES, the tree structure of the type belonging to f is displayed. The components of a node are stored in the table TYPES in a continuous manner. Beginning and end of the line area that represents the components are stored in TYPES-FROM and TYPES-TO. The reference to the superior node can be found in TYPES-BACK. If no superior resp. subordinate node exists, then this is marked by the value 0 (For the relevance of further components, refer to the following sections).
The names of components, types etc. are not stored directly in TYPES. Instead, the components TYPES-IDX_... hold an index in the name table NAMES. The value 0 indicates that there is no reference to the name table.
NAMES contains the possibly fragmented names in the component NAMES-NAME. If a name continues in the following line, this is indicated by an asterisk ('*') in the component NAMES-CONTINUE.
The type description table (TYPES) not only stores information about the tree structure but also further information about the type of f resp. its components. This includes especially all information that can be determined using the usual additions to DESCRIBE FIELD. In detail, TYPES contains the following columns:
IDX_NAME
Component Name
IDX_USER_TYPE
Name of a user-defined type, i.e., a type that was defined through its TYPES-statement. Derived types (... TYPE A-B) and structures from the ABAP-Dictionary are not considered to be user-defined types.
CONTEXT
For user-defined types only: The context, in which the type is defined. Possible values are defined in the constant SYDES_CONTEXT of the type group SYDES. Please only use these constants to carry out a comparison. In detail, we distinguish between the following type contexts:
SYDES_CONTEXT-PROGRAM: Program-global type
SYDES_CONTEXT-FORM   : FORM-local type
SYDES_CONTEXT-FUNCTION: FUNCTION-local type
SYDES_CONTEXT-METHOD : METHOD-local type
IDX_CONTEXT_NAME
For user-defined types only:
With a local context: The name of the FORM or FUNCTION, whose type was defined. The name of the associated program is then the first entry in the name table.
With a global context: The name of the program in which the type was defined.
IDX_EDIT_MASK
Conversion routine from the ABAP-Dictionary, is in accordance with the addition EDIT MASK at simple DESCRIBE.
IDX_HELP_ID
Help-Id when referencing to fields from the ABAP-Dictionary
LENGTH
Internal length, corresponds to the addition LENGTH at simple DESCRIBE
OUTPUT_LENGTH
Output length, corresponds to the addition OUTPUT-LENGTH at simple DESCRIBE
DECIMALS
Number of decimal digits, corresponds to the addition DECIMALS at simple DESCRIBE
TYPE
ABAP-Type, corresponds to the addition TYPE at simple DESCRIBE
TABLE_KIND
A table type is stored here for the components which represent an internal table. The same values are returned as with the variant DESCRIBE TABLE itab KIND k. Components which do not represent a table get the return value set to SYDES_KIND-UNDEFINED (see type group SYDES).
Example
Example definition of the complex data type EMPLOYEE_STRUC:
PROGRAM DESCTEST.
TYPES: BEGIN OF name_struc,
         first TYPE c LENGTH 20,
         last   TYPE c LENGTH 20,
       END OF name_struc,
       BEGIN OF absence_time_struc,
         day        TYPE d,
         from       TYPE t,
         to         TYPE t,
       END OF absence_time_struc,
       phone_number TYPE n LENGTH 20,
       BEGIN OF employee_struc,
         id         LIKE sbook-customid,
         name       TYPE name_struc,
         BEGIN OF address,
           street TYPE c LENGTH 30,
           zipcode TYPE n LENGTH 4,
           place   TYPE c LENGTH 30,
         END OF address,
         salary_per_month TYPE p LENGTH 10 DECIMALS 3,
         absent           TYPE STANDARD TABLE OF absence_time_struc
                               WITH NON-UNIQUE DEFAULT KEY,
         phone            TYPE STANDARD TABLE OF phone_number
                               WITH NON-UNIQUE DEFAULT KEY,
       END OF employee_struc.
You can determine the structure of the type EMPLOYEE_STRUC by collecting the type group SYDES as follows:
TYPE-POOLS: sydes.
DATA: employee TYPE employee_struc,
      td       TYPE sydes_desc.
DESCRIBE FIELD employee INTO td.
The following table shows a few selected columns of the type description table TD-TYPES. For a better overview, the names of the columns IDX_NAME, IDX_UERR_TYPE and IDX_EDIT_MASK have been shortened:
    |FROM| TO |BACK|NAME|UTYP|EMSK|TYPE
|--||||||--
1 | 2 | 7 | 0 | 0 | 2 | 0 | v
2 | 0 | 0 | 1 | 6 | 0 | 4 | N
3 | 8 | 9 | 1 | 7 | 5 | 0 | u
4 | 10 | 12 | 1 | 8 | 0 | 0 | u
5 | 0 | 0 | 1 | 9 | 0 | 0 | P
6 | 13 | 13 | 1 | 11 | 0 | 0 | h
7 | 17 | 17 | 1 | 12 | 0 | 0 | h
8 | 0 | 0 | 3 | 13 | 0 | 0 | C
9 | 0 | 0 | 3 | 14 | 0 | 0 | C
10 | 0 | 0 | 4 | 15 | 0 | 0 | C
11 | 0 | 0 | 4 | 16 | 0 | 0 | N
12 | 0 | 0 | 4 | 17 | 0 | 0 | C
13 | 14 | 16 | 6 | 0 | 18 | 0 | u
14 | 0 | 0 | 13 | 20 | 0 | 0 | D
15 | 0 | 0 | 13 | 21 | 0 | 0 | T
16 | 0 | 0 | 13 | 22 | 0 | 0 | T
17 | 0 | 0 | 7 | 0 | 0 | 0 | N
Please note that the entries in rows 6 and 7 represent internal tables (ABAP-Type h). There is always an entry for the corresponding row type (rows 13 and 17) to an internal table.
The indices in the rows 5 to 7 refer to entries in the name table TD-NAMES. If you look, e.g., at row 3, you find the corresponding component name in TD-NAMES from row 7 (NAME) onward and the corresponding user type from row 5 (NAME_STRUC) onward.
In the name table TD-NAMES you find the following entries. Note that the names SALARY_PER_MONTH and ABSENCE_TIME_STRUC are stored in two parts:
    |CONTINUE|NAME                   |CONTINUE|NAME
|--|     -||--
1 |        |DESCTEST            12 |        |PHONE
2 |        |EMPLOYEE_STRUC      13 |        |FIRST
3 |        |SBOOK-CUSTOMID      14 |        |LAST
4 |        |==ALPHA             15 |        |STREET
5 |        |NAME_STRUC          16 |        |ZIPCODE
6 |        |ID                  17 |        |PLACE
7 |        |NAME                18 |   *    |ABSENCE_TIME_ST
8 |        |ADDRESS             19 |        |RUC
9 |   *    |SALARY_PER_MONT     20 |        |DAY
10 |        |H                   21 |        |FROM
11 |        |ABSENT              22 |        |TO

IP pool selection from RADIUS

Hi,
I'm trying to assign different ip addresses to each vpn client depending the group the belong to. To do so, I create three different pools locally to the router and configure the radius server to send the Cisco-AVPair=”ip:addr-pool=poolname” attribute. The radius server is sending this attribute correctly but the router isn't using it. If I try with the Framed-IP-Address it works fine, but not for the pool.
Here is the related router config:
aaa new-model
aaa authentication login RemoteUsers group radius
aaa authorization network UsersGroup group radius
aaa session-id common
crypto isakmp policy 100
encr aes 256
authentication pre-share
group 2
crypto isakmp client configuration group Users
key xxxx
pool pool1
acl UsersSplit
crypto isakmp profile UsersProfile
   match identity group Users
   client authentication list RemoteUsers
   isakmp authorization list UsersGroup
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set Transf-Users esp-aes esp-sha-hmac
mode transport
crypto ipsec profile Prof-Users
set transform-set Transf-Users
set isakmp-profile UsersProfile
ip local pool pool1 192.168.110.10 192.168.110.20
ip local pool pool2 192.168.120.10 192.168.120.20
ip local pool pool3 192.168.130.10 192.168.130.20
Freeradius config:
testuser Auth-Type := Local, User-Password == "testpass"
Service-Type = Framed-User,
Framed-Protocol = PPP,
cisco-avpair = "ip:addr-pool=pool1",
Without enabling authorization, testuser connects succesfully, but after I enable authorization to instruct the router to accept pool configuration, it automatically authenticate using the isakmp Users user, without asking for the real vpn testuser client and the connection fails.
Is authorization essential? Using authentication I can assign ip addresses from Radius.
I also used the Framed-IP-Pool value without success.
What I'm missing?
Thanks in advance.

Hi Jatin,
Thanks for your quick reply. Here is the new configuration and the debugs. I'm using IOS c890-universalk9-mz.152-1.T.bin and Cisco VPN client 5.0.07.0290 version.
IOS Configuration with authorization and accounting enabled:
aaa new-model
aaa authentication login RemoteUsers group radius
aaa authorization network UsersGroup group radius
aaa accounting network default
aaa session-id common
IOS Debugs:
Jun 4 21:20:46.133: AAA/BIND(00000010): Bind i/f
Jun 4 21:20:46.149: AAA/AUTHOR (0x10): Pick method list 'UsersGroup'
Jun 4 21:20:46.153: RADIUS/ENCODE(00000010):Orig. component type = VPN IPSEC
Jun 4 21:20:46.153: RADIUS: AAA Unsupported Attr: interface         [222] 11
Jun 4 21:20:46.153: RADIUS:   31 30 2E 31 34 2E 31 34 2E         [ 10.14.14.]
Jun 4 21:20:46.153: RADIUS(00000010): Config NAS IP: 0.0.0.0
Jun 4 21:20:46.153: RADIUS(00000010): Config NAS IPv6: ::
Jun 4 21:20:46.153: RADIUS/ENCODE(00000010): acct_session_id: 6
Jun 4 21:20:46.153: RADIUS(00000010): sending
Jun 4 21:20:46.153: RADIUS/ENCODE: Best Local IP-Address 10.14.14.30 for Radius-Server 10.14.14.17
Jun 4 21:20:46.153: RADIUS(00000010): Send Access-Request to 10.14.14.17:1812 id 1645/4, len 98
Jun 4 21:20:46.153: RADIUS: authenticator 01 A1 34 BE 06 3D C2 C5 - 4F EE 98 D7 47 4D BF AB
Jun 4 21:20:46.153: RADIUS: User-Name           [1]   10 "Users"
Jun 4 21:20:46.153: RADIUS: User-Password       [2]   18 *
Jun 4 21:20:46.153: RADIUS: Calling-Station-Id [31] 13 "10.14.14.17"
Jun 4 21:20:46.153: RADIUS: NAS-Port-Type       [61] 6   Virtual                   [5]
Jun 4 21:20:46.153: RADIUS: NAS-Port            [5]   6   0
ruc#
Jun 4 21:20:46.153: RADIUS: NAS-Port-Id         [87] 13 "10.14.14.30"
Jun 4 21:20:46.153: RADIUS: Service-Type        [6]   6   Outbound                  [5]
Jun 4 21:20:46.153: RADIUS: NAS-IP-Address      [4]   6   10.14.14.30
Jun 4 21:20:46.153: RADIUS(00000010): Sending a IPv4 Radius Packet
Jun 4 21:20:46.153: RADIUS(00000010): Started 5 sec timeout
ruc#
Jun 4 21:20:48.205: RADIUS: Received from id 1645/4 10.14.14.17:1812, Access-Reject, len 20
Jun 4 21:20:48.205: RADIUS: authenticator 2A B6 91 42 DF 70 2B 89 - AF D5 59 82 31 3B EA 53
Jun 4 21:20:48.205: RADIUS(00000010): Received from id 1645/4
As you can see, the router authenticates automatically using the Users user configured under at the isakmp client configuration group. The VPN client software does not prompt for the real user account and fails. Why the router is not asking for the user? I was expecting the router performs authentication first and authorization later. Take a look at the FreeRadius debug:
FreeRadius debug:
Ready to process requests.
rad_recv: Access-Request packet from host 10.14.14.30:1645, id=4, length=98
        User-Name = "Users"
        User-Password = "cisco" <--Where does this password comes from?!
        Calling-Station-Id = "10.14.14.17"
        NAS-Port-Type = Virtual
        NAS-Port = 0
        NAS-Port-Id = "10.14.14.30"
        Service-Type = Dialout-Framed-User
        NAS-IP-Address = 10.14.14.30
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
radius_xlat: '../var/log/radius/radacct/10.14.14.30/auth-detail-20130604.log'
rlm_detail: ../var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d.lo
g expands to ../var/log/radius/radacct/10.14.14.30/auth-detail-20130604.log
modcall[authorize]: module "auth_log" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "Users", looking up realm NULL
    rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
    users: Matched entry DEFAULT at line 188
modcall[authorize]: module "files" returns ok for request 0
rlm_pap: WARNING! No "known good" password found for the user. Authentication m
ay fail because of this.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
ERROR: Unknown value specified for Auth-Type. Cannot perform requested action
auth: Failed to validate the user.
Login incorrect: [Users/cisco] (from client vpnServer port 0 cli 10.14.14.17)
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 4 to 10.14.14.30 port 1645
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 4 with timestamp 51ae5a41
Nothing to do. Sleeping until we see a request.
Any idea Jatin?

IRC Server Config and CGI:IRC

Well, I am trying to set up an IRC server with a web based cgiirc client program. The problem is that I can't get a working server. At all. I really can't get the config file to work for me, it just plain makes no sense. At all. Ever.

Hola Francisco, me parece muy buena idea tu IRC. Hemos detectado la necesidad de tener Soporte para Clientes a trav�s de IRC (Para clientes extranjeros, es fundamental por el ahorro de costes).
Si lo vas a dejar en alg�n sitio estoy muy interesado en verlo y comentar algunas cosas. Hazmelo saber si no es molestia.
Un saludo

Error in XML process generated

Hi,
please, I need your help. I have an XML develped in APEX 4.1.1. but I have a problem, because the "SRI_COMPRAS" table has 38 columns with 950 rows, and the xml is generated only when considering the first 14 columns of this table with all existing records. But I need generate this XML with all the columns of "SRI_COMPRAS".
The process is:
declare
begin
select xmlElement(
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("mes", J.MES),
xmlElement(
"compras", (
select xmlAgg(
xmlElement(
"detalleCompra",
xmlElement("codSustento", K.COD_SUSTENTO),
xmlElement("tpldProv", K.TPLD_PROV ),
xmlElement("idProv", K.ID_PROV ),
xmlElement("tipoComprobante", K.TIPO_COMPROBANTE),
xmlElement("fechaRegistro",to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') ),
xmlElement("establecimiento", K.ESTABLECIMIENTO ),
xmlElement("puntoEmision", K.PUNTO_EMISION ),
xmlElement("secuencial", K.SECUENCIAL),
xmlElement("fechaEmision", to_char(K.FECHA_EMISION, 'DD/MM/YYYY') ),
xmlElement("autorizacion", K.AUTORIZACION ),
xmlElement("baseNoGraIva", K.BASE_NO_GRA_IVA ),
xmlElement("baseImponible", K.BASE_IMPONIBLE ),
xmlElement("baseImpGrav", K.BASE_IMP_GRAV ),
xmlElement("montoIce", K.MONTO_ICE ),
xmlElement("montoIva", K.MONTO_IVA ),
xmlElement("valorRetBienes", K.VALOR_RET_BIENES),
xmlElement("valorRetServicios",K.VALOR_RET_SERVICIOS),
xmlElement("valorRetServ100",K.VALOR_RET_SERV_100),
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
xmlElement(
"air", (
select xmlAgg (
xmlElement (
"detalleAir",
xmlForest (
P.COD_RET_AIR as "codRetAir",
from ANEXO_COMPRAS P
from SRI_COMPRAS K
) )).getClobVal()
into l_clob_XML
from ...
LOOP
buffer := DBMS_LOB.SUBSTR(l_clob_XML, text_1, text_2);
EXIT WHEN buffer IS NULL;
sys.htp.p(buffer);
text_1 := text_1 + text_2;
END LOOP;
end;
The error generate is: "error on line 2 at column 1: expect '>'"
Edited by: JohannaCevallos07 on Sep 28, 2012 6:37 AM

Hi,
Actually the problem occurs when the xml file is generated with all the columns of the tables. Not seeing any data in th xml file and includes that message of error.
When in the xml code I determined display all the information of the tables considering only specific columns (14 columns for example) the xml file is generated successfully with all the information contained in the table only for those columns. but I need this xml file is generated with all the information for the tables columns describes in the first post publicated. : (
Do you have any idea of the cause for this error? Can you help me, please?

Spry Accordion Panels view incorrect in IE8

I have a page set up using both spry menu and spry accordion panels. The problem is that in FireFox and Chrome, the pages view as they should. However, in IE, the panels on the accordion spread and are open, it doesn't view as it should. The test page is here www.sbcvote.us/index1.html the source code is below. My initial guess is that I have an open or not closed tag somewhere?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Joe Paul Gonzalez San Benito County Clerk-Auditor-Recorder-Registrar of Voters</title>
<meta name="keywords" content="Joe Paul Gonzalez, San Benito County, Clerk, Auditor, Recorder, Registrar of Voters, fppc form 460, reconveyance deed, deed of reconveyance, reconveyance, homepage, mechanics lien release, quit claim deed form, release of mechinics lien, form, san, reconveyance, county, deed, 460, california, fppc, nacimiento, trust, elections, ca, solictud, certifacadas, reporting, statements, nominees, handbook, contribution, joe, paul, gonzalez" />
<meta name="description" content="Joe Paul Gonzalez San Benito County Clerk-Auditor-Recorder-Registrar of Voters" />
<link href="scripts/style.css" rel="stylesheet" type="text/css" />
<script src="/SpryAssets/menu/SpryMenuBar.js" type="text/javascript"></script>
<script src="/SpryAssets/accordion/SpryAccordion.js" type="text/javascript"></script>
<link href="/SpryAssets/menu/SpryMenuBarHorizontal_sbcvote.css" rel="stylesheet" type="text/css" />
<link href="/SpryAssets/accordion/SpryAccordion_sbcvote.css" rel="stylesheet" type="text/css" />
<script language="javascript" type="text/javascript">
function clearText(field)
    if (field.defaultValue == field.value) field.value = '';
    else if (field.value == '') field.value = field.defaultValue;
</script>
</head>
<body>
<div id="wrapper">
    <div id="header">
      <div id="header_right">
            <ul id="header_button">
                <li><a href="#"><img src="images/home.jpg" alt="home" /></a></li>
                <li><a href="#"><img src="images/contact.jpg" alt="contact us" /></a></li>
            </ul>
            <div class="cleaner"></div>
            <form action="#" method="get">
                <input type="text" value="Enter a keyword here..." name="q" size="10" id="searchfield" title="searchfield" onfocus="clearText(this)" onblur="clearText(this)" />
                <input type="submit" name="Search" value="" alt="Search" id="searchbutton" title="Search" />
            </form>
      </div>
    </div> 
    <div id="banner">
    <div id="banner_box">
        <ul>
        <li><a href="clerk.htm" ><span class="current"></span><img src="images/countyClerk.jpg" alt="San Benito County Clerk" /></a></li>
            <li><a href="auditor.htm"><span></span><img src="images/countyAuditor.jpg" alt="San Benito County Auditor" /></a></li>
            <li><a href="recorder.htm"><span></span><img src="images/countyRecorder.jpg" alt="San Benito County Recorder" /></a></li>
            <li><a href="http://results.sbcvote.us" target="_new"><span></span><img src="images/coRegistrar_results.jpg" alt="" /></a></li>
        </ul>
        </div>
    </div> 
    <div id="menu">
      <ul id="MenuBar1" class="MenuBarHorizontal">
        <li><a class="MenuBarItemSubmenu" href="index.html">Home</a>
          <ul>
            <li><a href="#">Item 1.1</a></li>
            <li><a href="#">Item 1.2</a></li>
            <li><a href="#">Item 1.3</a></li>
          </ul>
        </li>
        <li><a href="registrar/candidateinfo.htm" class="MenuBarItemSubmenu">Candidate Info</a>
          <ul>
            <li><a href="candidate_forms_manuals.htm">Forms & Manuals</a></li>
            <li><a href="pdf/forms/registrar/candidates/2010CandidateHandbook.pdf">2010 Candidate Handbook</a></li>
            <li><a href="registrar/form460.htm" class="MenuBarItemSubmenu">FPPC 460s</a>
              <ul>
                <li><a href="registrar/form460_all.htm">Candidate Form 460s</a></li>
                <li><a href="registrar/2010_form460.htm">2010 Candidate 460 Forms</a></li>
                <li><a href="registrar/2009_form460.htm">2009 Candidate 460 Form</a></li>
                <li><a href="registrar/2008_form460.htm">2008 Candidate 460 Form</a></li>
                <li><a href="registrar/2007_form460.htm">2007 Candidate 460 Form</a></li>
              </ul>
            </li>
            <li><a href="candidate_reporting.htm">Reporting</a></li>
          </ul>
        </li>
        <li><a class="MenuBarItemSubmenu" href="registrar/votebymail.htm">Vote-By-Mail</a>
          <ul>
            <li><a class="MenuBarItemSubmenu" href="overseasvoting.htm">Overseas Voting</a>
              <ul>
                <li><a href="pdf/forms/registrar/votebymail/oversees_votebymail_request.pdf">Overseas Vote-By-Mail Request</a></li>
                <li><a href="pdf/forms/registrar/votebymail/guide_military_overseas.pdf">Guide Military Overseas</a></li>
                <li><a href="#">Untitled Item</a></li>
              </ul>
            </li>
            <li><a href="mailvotestatus.htm">Ballot Status</a></li>
            <li><a href="pdf/forms/registrar/votebymail/votebymail_app_gen_eng.pdf">Application </a></li>
            <li><a href="pdf/forms/registrar/votebymail/votebymail_app_gen_SPAN.pdf"> Español</a></li>
          </ul>
        </li>
        <li><a href="/registrar/registration.htm" class="MenuBarItemSubmenu">Register to Vote</a>
          <ul>
            <li><a href="registrar/national_vrc_notice.htm">Form English</a></li>
            <li><a href="http://www.sbcvote.us/registrar/national_vrc_notice_sp.htm">Español</a></li>
            <li><a href="registrar/statement_distribution.htm">Distribution</a></li>
          </ul>
        </li>
        <li><a href="registrar/pollworker.htm" class="MenuBarItemSubmenu">Pollworker</a>
          <ul>
            <li><a href="registrar/pollworker.htm">Become a Pollworker</a></li>
            <li><a href="registrar/pollworker.htm#student">Students</a></li>
            <li><a href="registrar/pollworker.htm#student">State Employees</a></li>
          </ul>
        </li>
        <li><a href="registrar/hava_faqs.htm" class="MenuBarItemSubmenu">HAVA</a>
          <ul>
            <li><a href="registrar/hava_complaint_procedure.htm">Complaint Procedure</a></li>
            <li><a href="registrar/hava_compliancemanual.htm">Compliance Manual</a></li>
          </ul>
        </li>
</ul>
</div> 
    <div id="content_wrapper">
    <div id="left_sidebar">
        <div class="box">
            <h2><span></span>Click on a Tab for Info</h2>
                <div class="body">
                    <ul class="side_menu">
                      <li>
                        <div id="Accordion1" class="Accordion" tabindex="0">
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Vote-By-Mail (VBM)</div>
                            <div class="AccordionPanelContent"><a href="/registrar/votebymail.htm">Vote-By-Mail Voting</a><a href="/pdf/forms/registrar/votebymail/overseas_votebymail_request.pdf">Overseas VBM Request</a>
                              <a href="/pdf/forms/registrar/votebymail/VBM_Application.pdf">Application for Permanent VBM </a><a href="/pdf/forms/registrar/votebymail/guide_military_overseas.pdf">Guide to Military Voting</a>
                              <a href="/pdf/forms/registrar/votebymail/votebymail_app_general_county_fill.pdf">Application VBM General Election</a><a href="/registrar/mailvotestatus.htm">Did My VBM Ballot Get Counted?</a><br />
                                <br />
                              <br />
</div>
                          </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Voto Por Correo</div>
                            <div class="AccordionPanelContent"><a href="/registrar/spanish/voto.por.correro.html">Voto Por Correro</a><a href="/registrar/spanish/overseasvoting.SPAN.html">Votante Información Extranjero</a><a href="/registrar/mailvotestatus.htm">Cheque se recibimos su voto por correro</a> <a href="/pdf/forms/registrar/votebymail/VBM_ApplicationSPAN.pdf">Solicitud de Balota de Votación por correo en California</a></div>
                          </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Voter Information</div>
                            <div class="AccordionPanelContent"> <a href="/registrar/national_vrc_notice.htm">Register to Vote</a>
                              <a href="http://www.voterguide.sos.ca.gov/pdf/english/" target="_new">Voter Information Guide Nov 2010</a>
                              <a href="/pdf/forms/registrar/register/YourRightToVote_ENG.pdf">Your Right to Vote</a>                              <a href="/pdf/forms/registrar/register/eng-list-of-certified-candidates11.10.pdf">Certified Candidates Nov 2010</a>
                              <a href="/pdf/forms/registrar/register/TimeOfftoVote_ENG.pdf">Time Off to Vote </a><br />
                              <br />
                            </div>
                          </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Votante Información</div>
                            <div class="AccordionPanelContent"> <a href="/pdf/forms/registrar/register/Guide_Voting_SPAN.pdf" target="_new">Guía para Votar</a> <a href="/registrar/national_vrc_notice_sp.htm">Inscíibase para Votar</a> <a href="/pdf/forms/registrar/register/Voter-bill-of-rights.SPAN.pdf">Declaración derechos de Votantes</a> <a href="/pdf/forms/registrar/register/spanish-vig-nov-2010.pdf">Guía Oficial Información Nov 2010</a> <a href="/pdf/forms/registrar/register/spanish-list-of-certified-candidates11.10.pdf">Lista Candaditos Certificados 2010 </a><a href="/pdf/forms/registrar/register/TimeOfftoVote_SPAN.pdf">Tiempo Libre Para Votar</a></div>
                          </div>
<div class="AccordionPanel">
<div class="AccordionPanelTab">For the Candidates</div>
                            <div class="AccordionPanelContent">Blank 460 Forms<br />
                              Candidates 460 Forms Index<br />
                            2010 Candidate Handbook<br />
                            2010 Calendar </div>
                        </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Nov 2, 2010 Election</div>
                            <div class="AccordionPanelContent">Election Results Page<br />
                              Canvass of the Vote
                                <br />
                                Vote-By-Mail Ballot Look up<br />
                                State Vote Pamphlet<br />
                                Sample Ballot Statewide
                            </div>
                          </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Label 7</div>
                            <div class="AccordionPanelContent">Content 7</div>
                          </div>
                          <div class="AccordionPanel">
                            <div class="AccordionPanelTab">Label 8</div>
                            <div class="AccordionPanelContent">Content 8</div>
                          </div>
                        </div>
                      </li>
                        <li> <a href="#">Lorem ipsum dolor</a></li>
                <li><a href="#">Donec bibendum semper</a></li>
                        <li><a href="#">Proin tincidunt dapibus</a></li>
                        <li><a href="#">Nulla consequat</a></li>
                        <li><a href="#">In enim justo</a></li>
                        <li><a href="#">Aenean vulputate</a></li>
                        <li><a href="#">Etiam ultricies</a></li>
                        <li><a href="#">Nullam vehicula egestas </a></li>
                    </ul>
</div>
            <div class="box_bottom"><span></span></div>
            </div>
            <div class="box">
            <h2><span></span>Our Departments</h2>
                <div class="body">
          <ul class="side_menu">
                        <li><a href="clerk.html">County Clerk</a></li>
                        <li><a href="auditor.html">County Auditor</a></li>
                        <li><a href="recorder.html">County Recorder</a></li>
                        <li><a href="index.html">Registrar of Voters</a></li>
                        <li><a href="http://results.sbcvote.us" target="_new">Election Results</a></li>
                        <li></li>
                        <li></li>
                        <li></li>
</ul>
                </div>
            <div class="box_bottom"><span></span></div>
            </div>
        </div> 
        <div id="content">
<div class="box">
            <h2><span></span>Welcome to the San Benito County Registrar of Voters</h2>
                <div class="body">
                    <p> Welcome to our new and updated website for the County of San Benito Clerk-Auditor-Recorder- Registrar of Voters. </p>
              </div>
            <div class="box_bottom"><span></span></div>
            </div>
            <div class="box">
            <h2><span></span>News and Updates</h2>
                <div class="body">
                    <div class="news_box">
                      <h3><a href="http://results.sbcvote.us" target="_new">November 2, 2010 Election Results</a></h3>
                        <p>Up to the minute election results for San Benito County will be uploaded to our website at the close of the polls on Tuesday, November 2, 2010 at<a href="http://results.sbcvote.us" target="_new"> http://results.sbcvote.us.</a></p>
                      <div class="cleaner"></div>
                  </div>
              <div class="news_box">
                <h3><a href="registrar/mailvotestatus.htm">Vote-By-Mail Ballots</a>
                </h3>
                <p>Verify that your Vote-By-Mail Ballot has been received <a href="/registrar/mailvotestatus.htm">here.</a> To insure that your vote is counted, drop off your VBM ballot to our offices on the second floor of the courthouse building room 406 BEFORE Tuesday, Nov. 2, 2010.</p>
                    <div class="cleaner"></div>
                </div>
              <div class="news_box">
                    <a href="#"><img class="news_image" src="images/image_08.jpg" alt="image" /></a>
               <h3><a href="#">Auditor's Department</a></h3>
                    <p> Praesent rhoncus faucibus nibh, non molestie lectus sagittis sed. Praesent ac sem lectus. Cras molestie elit sit amet velit tincidunt imperdiet. Mauris nulla purus.</p>
                <div class="cleaner"></div>
                </div>
                <div class="more float_r"><a href="#">View All</a></div>
                <div class="cleaner"></div>
                </div>
            <div class="box_bottom"><span></span></div>
            </div>
        </div> 
       <div id="right_sidebar">
        <div class="box">
            <h2 align="center"><span></span>Joe Paul Gonzalez</h2>
                <div class="body">
                  <ul class="side_menu">
                        <li></li>
                        <li></li>
                        <li><img src="images/joepaul_new.jpg" width="207" height="262" alt="joe paul gonzalez" /></li>
                        <li></li>
                        <li></li>
                        <li></li>
                        <li></li>
                        <li><a href="#">County Clerk-Auditor-Recorder</a></li>
                  </ul>
              </div>
            <div class="box_bottom"><span></span></div>
            </div>
            <div class="sidebar_box">
      <a href="http://results.sbcvote.us" target="_new"><img src="images/results.jpg" alt="Election Results" /></a>            </div>
            <div class="sidebar_box">
            <a href="#"><img src="" alt="City Zoo" /></a>            </div>
      </div> 
        <div class="cleaner"></div>
    </div> 
</div> 
<div id="footer_wrapper">
<div id="footer">
        <ul class="footer_menu">
        <li><a href="#">Homepage</a></li>
            <li><a href="#">Site Map</a>
            </li>
            <li><a href="#">Clerk</a>
            </li>
            <li><a href="#">Auditor</a></li>
            <li><a href="#">Recorder</a></li>
            <li><a href="#">Registrar of Voters</a></li>
            <li><a href="#">Election Results</a></li>
            <li><a href="#">Forms</a></li>
            <li class="last_menu"><a href="#">Contact</a></li>
        </ul>
        Copyright © 2010 <a href="http://www.netwidesales.com" target="_new">NetWideSales</a> |
        <a href="http://www.netwidesales.com" target="_new">Designed by Irma C. Gonzalez</a> |
    <a href="http://www.joepaulgonzalez.com" target="_new">Joe Paul Gonzalez</a> </div> 
</div> 
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"/images/menubar/SpryMenuBarDownHover.gif", imgRight:"/images/menubar/SpryMenuBarRightHover.gif"});
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>
I appreciate any help here, it really doesn't make sense to me, it did work for a few viewing in IE and I must have changed something by mistake?
Thanks again.

I added a set width to the accordion css and that solved the problem of the widget running across the page. The IE issue appears to be an ongoing issue with IE. If a viewer has IE8, then hitting the compatibility button on the menu bar will solve the viewing problem. If not, it doesn't view correctly. It views fine on other browsers (Chrome, etc). Problem is how many people will know to hit the compatibility button?
Thank you for your help, I appreciate the time taken.

RUC extranjero

Similar Messages

Maybe you are looking for