RUEI: Unique User Count in the Dashboard?

Hi Guys,
Would you happen to know how I could simply add how many unique user ID's were in our system within a 24 hour period? I just need to find a count of them to add to the dashboard. Any ideas?

RUEI offers a reporing framework which can list you the unique userid which logged into your system.? It has to be custom report but it can be exported in any format.
How ID gets identified is restricted to way you identify usernames in the ruei configuration.
Syed

Similar Messages

  • Flash installer asks user to close the Dashboard client, but provides no information on how to do so

    When installing Flash Player on a Mac, the installer asks the user to close the Dashboard client. However, no explanation is given by the installer on what the Dashboard client is, or how to close it. There is no information on this on the installation help information at adobe.com. There is apparently no direct mechanism to close "dashboardclient" provided by Apple either.
    Installer: Version 3.3.9.0 (3.3.9.0)
    MacOS 10.7.5

    Mike,
    That's a solution that would work, but the average user should not have to jump through hoops just to install a plug-in. Force quiting processes in any OS can have dangerous and unintended consequences and should not be attempted, unless you know what you are doing.
    I have installed countless Flash updates over the years, and this is the first time this has happened. So, if I've been running the "dashboardclient" for years, this tells me Adobe dropped the ball on this installer.
    Bottom line: The end-user should have an installer that doesn't require monkeying around with user processes. If a process has to be stopped, most installers will require a restart and take care of it through the installer. Many others do this, Adobe should as well.
    (P.S.: Deleting the "Flash Player.plugin" (HD>Library>Internet Plug-Ins) will allow for an install, without quitting the Dashboard processes,)

  • Not to run report while landing in the Dashboard

    Hi All,
    This might be same question i am asking but not able to achive any perfect solution to this.
    I dnt want to run the report when the user logs into the Dashboard and show the proper message saying select the prompts and then run the report.
    Regards

    Actually if you look at the Log, you'll see that a query will be sent to the database by default. The only way I am aware off to achieve this w/o the use of guided navigation is to use the section property (collapse/uncollapse), when a section is collapsed, no report is run upon landing on the dashboard: set the section default property to collapse.

  • Can the Portal Activity Report show unique users per page?

    Hello all
    I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
    Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
    Regards,
    Martin

    Hi sogaard,
    It shows the no of unique logons.isnt it.
    Try these blogs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
    Hope this helps
    Regards
    Vineeth

  • KM File Unique user hit count

    Hi All,
    Is there a way to know the hit count for a KM file (Unique user hit count). As KM maintains read and unread flag for each user.

    Hello, yes, you could activate KM Activity Report, go to
    System Administration > System Configuration > Knowledge Management > Content Management > Global Services > Activity Reporting Service (advanced option)
    restarting is necessary, a .txt file will be created every day on the server at
    /usr/sap/<SID>/<INSTANCE ID>/j2ee/cluster/server0/<activiy report folder default/custom name>
    which can then be analyzed with excel, normal filters/subtotal function or
    if you prefer use a BI tool
    on the beggining the "Main File Format" is a string quite confusing, please refer
    to the following document for more in depth configurations
    http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/20bdc97c-face-2b10-dfab-c85ed4a4ebe6&overridelayout=true
    kind regards,
    Rafael

  • Fetch-Xml based report (to count User Access in the last 6 months ) for Microsoft Dynamics CRM Online

    Hi,
    I have created a User Access report for CRM on-premise using SQl query in the following format. One row corresponds to one user in organization. Currently, I am using Microsoft Dynamics CRM Online trial version and have two users in my organization.
    I want to the same report for CRM Online environment. Only Fetch-Xml based custom reports are supported by CRM online environment hence this SQL query cannot be used.
    I have already written fetch-xml query to retrieve user access records ("audit" entity records) in "last-x-months" (where x = 1,2,3,4,5,6) as below.
    I am able to retrieve the records with "last-x-months" condition at a time, for example, the last-2-months  in my fetch-xml query only.
    For, example, when I retrieve the records in the last-2-months, it also includes the records in the last month. I want to count the records in the 2nd month only that is the difference between these two. The difference will be my 2nd column.
    Similarly, I want the other columns.  
    For the case in the above example, I have created the two separate datasets to get the record-count for the last month and last-2-months. But, I am not able to use the two datasets in the same table in my report and hence not able to calculate the difference.
    Is there any way to solve this problem?

    Hi,
    I have modified my Fetch-XML query to retrieve all the required User Access records and removed aggregation and counting and grouping from the query as well. Did grouping and counting in SSRS. Now the report works fine as shown in the above picture.

  • "%userprofile%\appdata\local" is counted in the users profile

    Hello,
    In our environment we see some strange behavior on laptops. Users report that their user profile is becoming too large. We use the user Profile Management tool from Microsoft.(Limit profiles size - proquota.exe @ 100mb)
    So “%userprofile%\appdata\local” is counted in the users profile.
    After that userprofiles are inconsistant. Users log's on with a TEMP profile or cannot logon anymore.
    This seems just a symptom of a underlying problem. We can solve it by giving the user a new userprofile. But we have seen this problem too frequently now.
    How is it possible that de default variables %LOCALAPPDATA% en %APPDATA% suddenly are missing. The day before the user has no problem. It mostly happens on laptops after a VPN or WIFI connection. It looks like if the connection is lost before the local user
    profile is synchronised to the server profile.
    We also see Event 1530 frequently. Can this be a clue?
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
    ## user registry handles leaked from \Registry\User\S-1###
    Is the missing of these variables the cause or effect of a corrupt user profile?
    Should we think of leaving roaming profiles for laptops? And look to UE-V or another solution? 
    Giving the user a new user profile is a workarround but not a solution.
    We are using:
     We use Windows 7 x86, latest patches, Office 2010.
     A Windows 2003 domain functional level
     We have an OU in AD wich contains the users and computer in subfolders.
     We use Loopback processing for Group policy so the user policy is linked to the client OU and not to the user OU.
     We user folder redirection to the homeshare (DFS namespace)
     User profiles are on a DFSnamespace but single server.
     We user Offline files for the Homeschare.
    Regards,
    Peter

    Hi Laarse,
    Thanks for the reply.
    Please try enable “Do not forcefully unload the users registry at user logoff”
    policy to check if it works. The Category path is
    Computer Configuration\Administrative Templates\System\user Profiles\
    After that, if the issue still exist, please collect below information for further research.
    Information Collection
    ===============
    1. Enable gpsvc debug logging by below steps:
    In the Regedit Editor, expand HKLM\Software\Microsoft\Window NT\CurrentVersion
    Create a new key called “Diagnostics”
    Under the key, create a DWORD value “GPSvcDebugLevel” and set the value as
    0x30002.
    After making this change, restart the computer.
    When the issue happens again, please send me the gpsvc.txt under %systemroot%\debug\UserMode folder.
    Please let me know the time you experience this issue.
    2. Please help run
    gpresult /h c:\gpresult.html command on a problematic client, and send me the
    gpresult.html file.
    3. Please help collect profile trace on a problematic client by below steps:
    Logon to a client with local administrator account.
    Open a command prompt with ELEVATED.
    Run "logman -start profile -p {eb7428f5-ab1f-4322-a4cc-1f1a9b2c5e98} 255 3 -ets" (without the quotes, if we face error, please do not use copy, manually input this
    command)
    Switch user (do not log off the administrator account) and try to logon with the problematic user to reproduce the symptom.
    After you login, please logoff the domain user and back to local administrator account.
    Run command
    "logman -stop profile -ets" with administrator privilege.
    Then send me the profile.etl under
    %SystemRoot%\Debug\UserMode folder 
    Thanks.

  • Unable to view BIPub report in the Dashboard by Non Administrator users

    Hi All,
    I have created a BI Publisher report and added the same to the Dashboard, I can view it as the Administrator user but unable to view it as any other Users.
    I updated the privileges in the BI Presentation services and gave permission to Everyone for BI Publisher:
    Oracle BI Publisher Enterprise
    Add BI Publisher Reports to Dashboard - Everyone
    View BI Publisher Reports - Everyone
    Schedule BI Publisher Reports - Everyone
    Send BI Publisher Reports - Everyone
    Build BI Publisher Reports - Everyone
    Analyze BI Publisher Reports - Everyone
    but users still get the below error:
    The error message is :
    "Unauthorized Access: Please contact Administrator"
    Any help is greatly appreciated.
    Regards

    Hi Saichand,
    Thanks for the reply, I did add and it worked successfully; but the issue now is that I had assigned the XMLP_ADMIN, XMLP_DEVELOPER roles to this user and he now has XMLP Administration rights. Which is not very good.
    Is there any workaround to restrict XMLP Administration to this user and allow him just to view the BI Pub Report?
    Your comments are greatly appreciated.
    Best Regards
    B

  • What is the powershell command to get the user count in Active Directory

    What is the powershell command to get the user count in Active Directory

    Get-ADuser
    REF: http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/30/powertip-single-line-powershell-command-to-list-all-users-in-an-ou.aspx
    This post is provided AS IS with no warranties or guarantees, and confers no rights.
    ~~~
    Questo post non fornisce garanzie e non conferisce diritti

  • How to craete a user who can only browse the dashboard??

    Hi friends,
    How to create a test user who can only browse the dashboards and not able to modify any of the reports using answers??
    Please tell me the steps.
    Thanks

    @Alastair: I thought it'd be nice to start a new trend in the forum.
    @bob123: Depends on how you manage your user and groups in general. Everything created in the RPD? Read from some Oracle tables? LDAP/ADSI? You can do it in the RPD, in the web catalog (Edit Group -> Group Membership ==> The table below contains a list of the current members of this group. Users can join the group by entering the group's password from the Join Catalog Group screen, or you can manually add them by clicking Add New Member below.) or outside.

  • How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

    Dear
    Experts, I have a very exciting demand, the board of a customer.
    I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
    How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
    I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
    I ask, what is the standard solution that is used in these cases?
    Thank you
    Miki

    Dear
    Experts, I have a very exciting demand, the board of a customer.
    I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
    How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
    I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
    I ask, what is the standard solution that is used in these cases?
    Thank you
    Miki

  • Several users have lost the ability to change their default dashboard.

    The users have the ability to set other preferences, but if the default dashboard is changed they get an Access Denied message. The user's default dashboard still exists and is working. They want to change it to another existing dashboard for which they have access. When they try to change the dashboard, they get the access denied message.
    They can view the dashboards and change other preferences (language, time zone, etc.) they just cannot change the default dashboard.

    Thanx for the reply. According to catalog manager, the user has change/delete to this file (and the entire directory). As for the file system, the directory security is no different than for any of the user directories that are work fine.
    I did find that if I give the user:
    (1) Presentation Server Admin
    (2) The user then gets a "path noth found error".
    (3) Have the user change the url to go to answers instead of dashboards.
    (4) Create a simple report.
    (5) Save it under "My folder"
    Then I remove them from Presentation Server Admin and have them log back in. Then they can set their default dashboard. This is obviously an unacceptable work around.

  • Change the dashboard  display menu to users?

    Hi all..I have a dashboard group (name:sales) with 3 dashboards(a,b,c) in it...However...When I login withe Admin previlages, I can see the dahsboard names one below the other under "sales"
    but when my users Logon to Answers..They are viewing dashboard names a,b,c side by side instead of a group..
    My user would like to see the dahsboard names a,b,c one below the other ..grouped under "sales"
    Please suggest

    Hi..I didnot understand what you said..
    Heres is my question..
    In this following picture..If you click on 'SUpply Chain; You were able to see a menu of Dashboards(Inventory..Supplier Performance Etc)) under that folder...
    When I login with my ID which has admin previlages..I was able to see same structure..
    But My users, who have access to only 'Supply Chain' were not able to view the dashboard menu Inventoryy, Supplier Performance,Procurement and Spend
    dashboards one below the other, just as in pictire.......Instead, they are viewing them side by side...but not grouped under 'Supply Chain'..
    http://img101.imageshack.us/img101/7903/dbsf.jpg
    Please help..

  • Get the connected users count from sql server using powershell

    Hi,
    I am working on SharePoint 2013,I am having SQL server 2012.
    I want to get the Connected Users count from  sql server using power shell.
    Can any one please let me know how to implement.
    Thanks in advance.
    Regards,
    Phani Kumar R

    Sorry Tom, I dont like to hear "There is no way" :-(
    There is always a way in computer to get what you need (at least it is good as Rule of thumb). I am not sure we will find it here (in a voluntary supporting forum).
    Now we (or better the architect of their system) should think of the way :-)
    Of course doing so in the forum, while we do know the system and only got a glimpse on what is needed, is not the best idea. I will point some issues which can be related to a solution. Those are not a solotions as it is but something we can use for a solution
    once something look in the right way.
    * A web connects counter is one of the easier thing to do. The basic idea is just to use the connect event and the disconnect event an adding 1 or removing 1 from the counter. This is best to do in the application using static variable as any way the second
    the application is down the counter can be go to hell as we know there is no one connect (there for a counter do not use database usually). Using a web dot-net (or asp 3) application this is done most of the time using the global.asa/global.asax file, which
    include the application and session events. for example using the method Session_Start
    protected void Session_Start(object sender, EventArgs e) {
    // Code that runs when a new session is started
    * IIS have a build-in loging system where we can log each and every request/response or only logins users. There is lot we can do with this log files including data mining. Using small bulk insert script we can use the SQL agent to insert those logs to the
    database and get the information we need.
    * any web developer i want to believe know about the Fiddler application which we use to monitor traffic. A proxy is not the only way to to monitor traffic (it is not good for our case as this is in the client side), there are several option in the server
    side.
    * SQL trigger on logon can be use to get information on who is loging on and can be logging only specific source (like our sharepoint IP or any sharepoint application). This information (what is the application which connect to the server can be retrive
    in several solution without using a trigger as well)
    *** (I'll be brief ... I'm getting bored... probably the reader feel the same)
    * using extended events and/or profiler we can monitor any connection and save the data or just remember it in shared (static) variable (this
    blog show how to do it by the way). Again we can monitor specific application or use any filter in order to get only the sharepoint users
    .... and i can continue for several days more :-) ...
    "If there is a willing, then there's a way"
    "If you can't do it, Then someone else probably can"
    "Never say never"
    I hope this help somehow :-)
    [Personal Site] [Blog] [Facebook]

  • Need to limit the user count to 10,000 in all the Organisations

    Hi,
    We have a requirement that the user count should not exceed 10,000 in any of the organisation. If it exceeds, then OU Admin should request superadmin/xelsysadm to clean up records i.e to remove inactive accounts.
    We need Custom request screen in OIM, so that OU level admin can request/notify super admin about the increase in user count in an ou.
    Any suggestions, on how to implement this scenario, will be of great help.
    Thanks.

    Hi,
    Actually, I want that during create user, as soon as user clicks on create user page, an message should get displayed saying user count in that organisation has exceeded more than 500 and user will not be created.
    Then that OU level admin(who was creating user) should request Super admin/xelsysadm to clean up records (Custom request screen in OIM, which should notify super admin). I want custom screen/request, where the ou level admin can say/request xelsysadm that the user count in that org has exceded more than 500 and request to delete unwanted/locked and Inactive account from that OU.
    Is this requirement possible, if yes then please guide me.
    Thanks.

Maybe you are looking for