Rule file for generating XPath for forms problem

Hi, suggestion
"Rule file is invalid or missing. Please recreate it as followings: Navigate to OpenScript menu: View->OpenScript Preferences..->OpenScript->Record->Oracle EBS/Forms
Functional->Object Identification(tab), click 'Apply', then click 'OK'"
does not work, still the same error in Diagnostics tool (OATS Openscript 12.2.0.1) IE 8
Best regards
DC

We would like to move the ruleset data from GRC CC 5.3 to GRC CC 5.2
We dont know if the rule export format has changed from 5.3 to 5.2
So the idea is that we would export the 'function authorization' data from 5.3 CC table, and upload it in the
correct 5.2 format, using Configuration -> Rule upload-> Function Authorization.
Thanks

Similar Messages

Can anyone help me wid d codes for Generated Program for gate pass

can anyone help me wid d codes for Generated Program for gate pass in MM
Message was edited by:
Ronei Shedi

Hi
There is no std business process in SAP for Gate pass for the Material entry
before GR stock entry into the stores.
You have to write a Z program based on the details of Purchase order tables EKKO and EKPO.
This will mainly check whether the correct PO qty was delivered or not with proper quality.
So use the PO tables EKKO and EKPO and fetch the data and use it
Since this is client specific there is no feneralised program for it.
Reward points if useful
Regards
Anji

Message type for generating IDOC for SUBCONTRACTING PURCHASE ORDER

Hi All,
I have to generate IDOC for PO creation or change .
I am using IDOC_OUTPUT_ORDERS and IDOC_OUTPUT_ORDCHG.
The messagetype.idoctype I am using is ORDERS. ORDERS05 and ORDCHG. ORDERS05.
Now the confusion is regarding whether this message type will work in case of SUBCONTRACTING PURCHASE ORDER as well ?
As I have gone through some websites and came to know that I will have to use PORDCR1.PORDCR102 specially for subcontracting.
And programs we need to use is BUS2012_ICH_R3 instead of RSNASTED and Form Routine SEND_PORDCR1 instead of EDI_PROCESSING.
Purchase Order Collaboration scenario - Not generating IDOC in ECC
http://www.erpgenie.com/faq/edi_purchasing.htm on this site question no 8.
Subcontract PO IDOCs
I hope your experience will help me .
Please reply ASAP.
Edited by: uttam27 on Dec 4, 2011 1:47 PM

There is a generic function to create change pointers for all message typs - 'CHANGE_POINTERS_CREATE_DIRECT'. This is triggered only if you configure your message type to create change pointers from BD50.
Once you activate it do any change to orders you can see change pointer tables BDCPV filled. Then BD21 will read the changes and generated outbound idocs accordingly.

Template missing for generated JSP ISR form

Hi all,
I'm trying to use a generated JSP iView as the input form for an ISR scenario. Here's what I have done:
1. Scenario definition
- copied standard scenario SPSP to ZPSP
- copied additional info SPSP to ZPSP
- selected scenario entry type as I (Entry using JSP iView)
- put in Internet link as http://<portal server>:<port>/irj
2. iView creation
- defined portal component isr_test2 in scenario, generated -> par file found on local hard drive
- uploaded par file to portal
- created iView with par template in portal
3. iView assignment
- for the scenario additional info, assigned pcd:portal_content/../<iView ID> as the portal component (I tried this with isr_test2.default, too)
Unfortunately when I try to display the form, I get an error that the template can't be found. I probably have the portal server or the iView ID setup incorrectly but since I have tried so many combinations already without luck, I thought someone could shed some light to this.
Best regards,
Mikko

Updated the struts build I was using, and this solved the problem. Thanks for taking the time if you read this post.
Dev

Using a pdf-template for generating an interactive form

Hi guys,
I have got the following problem. I have got an pdf-Document, that can be printed out and filled out manually.
Instead of I just want to use this pdf-Document as an template for an online form, by adding some fields.
How can I use this pdf-Document as an template?
Thank you for your answers. Patrick.

Hi Patrick,
Let me see if I understand your query properly first. Your requirement is that you have a PDF file which is pretty much fixed.
Now you want to use the Template present in the PDF file to be shown to the user, but this should be pre-filled with data that you receive from a Web Service & RFC.
Now firstly I will mention the easy way, which would require you extract the PDF Template statically, I am not sure if the API has now been released to do that programatically.
Now, lets say you store it is some location the template file, you would also need to tweak the DataBinding properties in the Template to match to that of the Context Node you will use in the application.
Now in the ModifyView method you should get a reference to the Interactive form element, use the setTemplateSource method to refer to your template.
Now based on the response from your RFC/WebService create the appropriate attributes into the node, and your form should work fine.
Regards,
Pavan

How to create rule/monitor to generate alert for a reboot of Linux (Redhat) server?

Need to receive an alert when a Linux server reboots. How can this rule/monitor be created?

You can use the "Shell Command" templates to create a UNIX/Linux Shell Command (Alert) rule. See the walkthrough and background here:
http://operatingquadrant.com/2012/01/30/opsmgr-2012-unixlinux-authoring-templates-shell-command/
The following command will identify the seconds the system has been "up" and return OK if it is greater than 15 minutes, and REBOOTED if the seconds up are less than 15 minutes. Your Shell Command rule should alert if the StdOut value contains
REBOOTED.
upseconds=`cat /proc/uptime |awk '{print int ($1 )}'`;if [ $upseconds -lt 900 ];then echo REBOOTED;else echo OK;fi
www.operatingquadrant.com

T-code SUIM taking much more time for generating output for profie change.

Hi All
We want to extract report for profile addition and deletion for Users in ECC 6. While executing the the t-code SUIM it is taking much more time (taking more than 20 hrs). This problem is coming after patch application
Please give the solution/Suggest to minimize the time taken in report generation.
Thanks-
Guru Prasad Dwivedi

Hello Prasad,
The reason for the performance trouble is a new feature regarding the user change documents. Since note 874850 and 1015043 you will get a more complete overview about the changes regarding a user.
The disadvantage of that new feature is, that in some customer system usage scenario, the performance is very poor. That's the case, if the central change documents are intensivly used also by other applications and the tables CDPOS, CDHDR, ... contains a very big count of rows. Unfortunatly the user change documents can not be searched by the key columns of the central change docs. - so the bad response time can explained.
What now ... ?
There are some work arounds to get the change documents on faster way.
1st. - You can get the former report output and performance if you
       would use the report RSUSR100 instead of the new RSUSR100N in
       separate mode.
2nd. - If you want to use the new report RSUSR100N directly and only
       want to get the information about the traditional topics
       (content of USH* tables) you should only mark the search areas
       on the tabstrip 'user attributes') to get a better performance.
     - furthermore limit the date range, if possible
3rd. - You should regulary (monthly) archive the user relevant documents
       for PFCG and IDENTITY from the central change documents.
       As per our note 1079207 chapter 3 you can reload that archives
       into more selective tables.
       The selection for change documents will be rather faster over
       reloaded archived documents than the documents in the
       central change documents tables.
Best Regards,
Guilherme de Oliveira.

[Digester] Problem using recursion in xml rule file

Hi!
I am trying to parse an XML file using digester but getting a problem. The file has a recursive tag. The format of the file given below:
<dpr-domain name="AircraftPerformances">
 <dpr-data-category name="AircraftClass" systemOption="FULLOLDI">
 <dpr-attribute name="landingSpeed" systemOption="HALFOLDI"/>
 <dpr-data-category name="holdingParameters" systemOption="HALFOLDI">
 <dpr-attribute name="maximumspeed1" systemOption="FULLOLDI"/>
 </dpr-data-category>
 <dpr-data-category name="turnRate" systemOption="FULLOLDI,HALFOLDI">
 <dpr-attribute name="maximumspeed2" systemOption="FULLOLDI"/>
 <dpr-data-category name="accelerateRate" systemOption="HALFOLDI">
 <dpr-attribute name="maximumspeed21" systemOption="FULLOLDI"/>
 <dpr-data-category name="descendRate" systemOption="HALFOLDI">
 <dpr-attribute name="maximumspeed211" systemOption="FULLOLDI"/>
 </dpr-data-category>
 </dpr-data-category>
 </dpr-data-category>
 </dpr-data-category>
</dpr-domain>
The rule file I have written for this is:
<digester-rules>
 <pattern value="dpr-domain">
 <object-create-rule classname="check.Domain"/>
 <pattern value="*/dpr-data-category">
 <object-create-rule classname="check.DataCategory"/>
 <set-properties-rule/>
 <pattern value="dpr-attribute">
 <object-create-rule classname="check.Attribute"/>
 <set-properties-rule/>
 <set-next-rule methodname="addAttributes" />
 </pattern>
 <set-next-rule methodname="addDataCategory" paramtype="check.DataCategory"/>
 </pattern>
 </pattern>
</digester-rules>
But this is not working. If the "dpr-domain" tag is removed, then it works. Please help me by giving a solution for this problem.
Regards,
Arshika

For this scenario,
First I have used FCC for the same structure and CSV is also generated, but the CSV when opened with NOTEPAD it is not showing endSeparator , i.e my first row last element is concatenated with second row first element,there is no row seperator.
But the same when opened with WordPad,we can see the data, row wise
now the destination system open the file in notepad only.
for that i tried using this Bean specified above but it is not fulfilling the requirement.
The parameters I have mentioned in FCC are as follows:
Recordset Structure : E1WBB01,E1WBB03,EAN_MASTER
NAME VALUE
EAN_MASTER.fieldSeparator , (comma)
EAN_MASTER.endSeparator 'nl'
E1WBB03.fieldSeparator ,
E1WBB03.endSeparator 'nl'
E1WBB01.fieldSeparator ,
E1WBB01.endSeparator 'nl'
Please provide a solution,why thr endSeparator is not shown in notepad.
Thanks

Query regarding Metadata load in Essbase using rule file

Hi
In our application,we are loading metadata using Essbase rule file and here we are facing one problem.Suppose we have to load a level 0 member called "xxxx" under two different parent,assume the parent members are Parent_AAAA and Parent_BBBB.But our requirement is the consolidation operator for the first occurrence ( i.e under Parent_AAAA) is "+" and for the shared member under Parent_BBBB is "-".But,when we are loading using rule file the consolidation operator for the shared member always being loaded as "+".Is there any trick to change the consolidation operator for shared member other than changing it manually in outline?
Pls help....Thanks in advance.

I don't think there is a way to change the default setting.
However, what you can do is to have a different load rule and different text file with only the metadata that you want to have an exception for shared members. That way, you can achieve it as you do not have to change the existing rule file.
Regards
ORACLE | Essbase

Unable to create .fsm file in Text Data Processing from .rul file

I am trying to compile english-tf-voc-sentiment.rul file to generate english-tf-voc-sentiment.fsm file using below command from cmd.
tf-cgc -i C:\Users\336655\Desktop\Modified\english-tf-voc-sentiment.rul -o C:\Users\336655\Desktop\Modified\english-tf-voc-sentiment.fsm
But getting below error.
Error: Could not open file ./english-tf-voc-thesaurus.rul
Error: Could not build FSM file.
where as english-tf-voc-thesaurus.rul is file which is called by english-tf-voc-sentiment.rul file
Any idea how to resolve this issue?

You can use following code to capture the error.
TRY.
      OPEN DATASET filename FOR OUTPUT IN BINARY MODE MESSAGE V_MSG.
      CATCH CX_ROOT
      INTO EXCEPTION.
      CALL METHOD O_EXCEPTION ->IF_MESSAGE~GET_TEXT
        RECEIVING
        RESULT = V_MSG.
      MESSAGE v_msg
      TYPE 'E'.
ENDTRY.
You can capture error in v_msg.
Following are the exceptions for the same:
Exceptions
Catchable Exceptions
CX_SY_FILE_OPEN
Cause: The file is already open.
Runtime Error: DATASET_REOPEN
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The desired conversion is not supported. (Due to specification of invalid code page or of language not supported in the conversion, with SET LOCALE LANGUAGE.)
Runtime Error: CONVT_CODEPAGE_INIT
CX_SY_CONVERSION_CODEPAGE
Cause: Internal error in the conversion.
Runtime Error: CONVT_CODEPAGE
CX_SY_FILE_AUTHORITY
Cause: No authorization for access to file
Runtime Error: OPEN_DATASET_NO_AUTHORITY
Cause: Authorization for access to this file is missing in OPEN DATASET with addition FILTER.
Runtime Error: OPEN_PIPE_NO_AUTHORITY
CX_SY_PIPES_NOT_SUPPORTED
Cause: The operating system does not support pipes.
Runtime Error: DATASET_NO_PIPE
CX_SY_TOO_MANY_FILES
Cause: Maximum number of open files exceeded.
Runtime Error: DATASET_TOO_MANY_FILES   Non-Catchable Exceptions
Cause: An attempt was made to open a pipe that is already open.
Runtime Error: DATASET_PIPE_POSITION
Hope that will help you.
Please reward if useful.

Substitution variable is not visible at Data Prep editor-creating rule file

Hi,
We are working on Essbase 9.3.1, Oracle as a database source for loading the data into Essbase.
We have create a substitution variable at "server level" to use it in rule file as a DSN for data source. But this substitution variable is not visible in the drop down of substitution variable in 'Data prep editor' while creating the rule file.
We restarted the Essbase server also but still it is not visible in 'data prep editor'.
Any help will appreciated on this issue.
Thanks & Regards,
Mohit Jain

Cameron-
1) yes I've tried it on 2 different clients
2) yes I've tried it on the server
3) I haven't tried that, but don't normally use MaxL for anything
4) I took a 'broken' rule, saved it locally, closed and reopened and it still didn't work
5) I normally do files on the server, but I can't even get to that point because when I get the 'Open Data File' nothing happens, no dialog box pops up, so I don't get the chance to select the location
6) This is a production server and EAS is running as a service, so I'd have to test this one afterhours.
Because it happens on 3 separate PC's I'd eliminate bad EAS, since only some rules do it and others don't I'd think it could be corrupt rules, but it'll happen to new rules just as fast, and they still work just fine, so if that's the case I need to figure out what is corrupting them...
Network issues wouldn't surprise me, I get TCP/IP errors regularly saying I have to increase my net retry count, but I've tweaked with those settings tons... looks like those are really the database server is running out of memory even though I have 4GB physical 16MB Virtual memory (32 bit environment though... I do have the /3GB switch turned on)... I've had to scale my caches way back to allow certain databases to even function.
Thanks for your help.
Edited by: Norton5150 on May 28, 2009 2:12 PM

MDT2012 Upd1 - Settings in rules file are not reprocessed after selecting another TS

We use MDT 2012 Update 1 and we have several tasksequences.
I found an article on how to use different settings per task sequence (from Mike Walker). This works fine.
So, when I select a task sequence and click next to go to our next screen in de Windows Deployment Wizard (the Computer Details) the settings are correct.
Unfortunately when I click back in the Windows Deployment Wizard to go back to the task sequence screen and change to another task sequence, the old settings are still visible in the Windows Deployment Wizard.
Is it possible to clear the settings and to reprocess the rules file?

Yup, that's a problem. when parsing CS.ini, there are some variables that are skipped if they have already been added. If you create CS.ini that will populate the TimeZone, If you go back and re-run the cs.ini, TimeZone won't get set again, because it's
already present.
Instead I would recommend using the Johan Method:
http://www.deployvista.com/tabid/36/EntryID/139/language/en-US/Default.aspx
That will *NOT* allow you to get settings within the task sequence, but hey...
IF you need to reset the Task Sequence, you can create some code in the TS selection Wizard Page to delete a set of variables whenever it's entered.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

DIM: how to load metadata to Essbase without using rule files

Hi,
The Essbase adapter has been installed in the informatica PowerCenter (v8.1.1). We want to create a Essbase target definition to load metadata. In the Table Creation Wizard, we select Table Type: Dynamic dimension building (Type 3), but it needs to specify Rules file in the Column Creation Wizard.
Any method to load metadata into Essbase without using Rules file?
Thank you in advance.

You could load the data into Essbase without Rule file by means of free form loading which the Datasource would be a file.

Can Adobe Flash be an alternate soft for Adobe Photoshop (for PRINT)? Is it possible to use Adobe Fl

Is it possible to use Adobe Flash instead of adobe photoshop for generating images for PRINT???
how about the CMYK settings? Will i have an issue with that? Please I need an expert at this too.

No. Flash would be one of the worst applications to substitute for Photoshop for creating art for print output. If you must use something other than Photoshop, you could use Illustrator, it is specifically designed to create artwork for print.
Flash has no direct method for outputting CMYK.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Rule file for generating XPath for forms problem

Similar Messages

Maybe you are looking for