Rule for parameter values when portlet defined?

Am I missing something?
In Plus:
--I make a sheet in Plus that is parameterized.
--The parameter for an item whose item class has a LOV.
--I define a default value.
--I save the sheet.
In the portal:
--I define a Disco portlet.
--I edit the defaults.
--I set the parameters.
Now, here's the weird thing: The only parameter value offered is the one saved as a default value in Plus?
This certainly makes no sense at all.
This is on 9.0.2.53.12
Anyone?

Dear Ashi,
Your question falls into the paid support category which requires a more in-depth level of support. Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Please refer to the below articles:
1) How to Handle Typed Fault Contracts in Orchestrations
http://technet.microsoft.com/en-us/library/bb246117.aspx>
2) A sample provided at:
http://msdn2.microsoft.com/en-us/biztalk/bb608378.aspx
Thanks,
Belinda

Similar Messages

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Pop-ups for parameter value insertion don't appear

Hi,
I am using Web Intelligence for creating a report that allows custom parameter values to be inserted via pop-up.
The problem is such pop-ups for parameter value insertion don't appear on the various web browsers I make use of.
(I.E. versioni, Firefox versioni)
Any idea on how to solve such issue?
thanks in advance,
SC

I suppose that you mean query prompts, that are parameters that are asked to the user in order to filter the data.
Which version of BOE are you using?. If you are using BOE XI R2, that problem happens when you use Java 1.6 (only when editing the document), you should use Java <=1.5 (you can check the error in the java console while you execute the report).
I think that problem was solved in a SP (not sure which SP solves this ¿SP4?)

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

Invalid value for parameter error when value is in list of allowed parameters

I have some documents with a lot of paragraph styles that have been organized into groups. I have a simple script that is meant to ungroup these styles and delete the now-empty groups.
Code:
#target indesign
var myDoc = app.activeDocument;
if (myDoc.paragraphStyleGroups.length > 0)
myDoc.paragraphStyleGroups.everyItem().paragraphStyles.everyItem().move(LocationOptions.AT_END, myDoc);
myDoc.paragraphStyleGroups.everyItem().remove();
alert("Done")
The error I receive is (emphasis mine):
JavaScript Error!
Error Number: 30477
Error String: Invalid value for parameter 'reference' of method 'move'. Expected ParagraphStyle, ParagraphStyleGroup, CharacterStyle, CharacterStyleGroup, CellStyle, CellStyleGroup, TableStyle, TableStyleGroup, Document or Application, but received Document.
As you can see, my pickle is that my value is of an allowed type. This only happens in some documents, and there's nothing that obviously distinguishes those documents from the ones in which it works.
One thing I've noticed is that the error sometimes takes a while to appear (a minute or so), but none of the styles have been moved once I click OK. So, I don't know if it's specific to one style. I doubt it, only because other documents with the same style set work.
Can anyone shed any light on what this error could mean in this context? I definitely have an activeDocument, so what could cause a Document to not be a Document?
Any help much appreciated!

Hi,
It occurs when 2 or more styles have the same name, probably.
Jarek

Specify rules for APC value takeover

Hi everybody,
When i tried to specify the rules for takeover for depn area 10 (MACRS/ACRS Tax Depreciation - Local Currency) as 01 (which is the legal depreciation) , the following information is displayed , thereby not allowing me to save the rule. Depreciation area 01 is a real depn area and not a derived one. I have checked all the relevant customisations. Please do help me out.
Message displayed:
You specified area 01 as the reference depreciation area for transferring values or depreciation terms to another depreciation area.
Area 01 is defined as a derived depreciation area. It does not manage its own values or depreciation terms. Therefore, it cannot be used to supply values or depreciation terms to another depreciation area.
Regards

TCODE:OAE1
TCODE:OADB
Check the dep.area - 01 is selected with "real depreciation area" check box.
(real depreciation area - stores the dep.values, derived dep.are - not real depreciation area and not stores the values, is only statistical)
if you tick the check box your problem will solve -- withou having values how can you transfer to others
VVR

Urgent help required - linked subreport keeps asking for parameter value

Greetings,
I have developed a report in the Crystal Reports bundled with Visual Studio 2005. The data is obtained from a stored procedure. One of the fields in the result set is named "Id".
I have embedded a subreport in the details row of the main report. The subreport also gets its information from a stored procedure. This stored procedure has one parameter named "OpportunityId". This field is linked to the field named "Id" above. the subreport has been set to supress blank subreports.
In the development environment and running the executable of the application on the development machine the report works perfectly. The subreport displays as it should and all is well.
When I deploy the report onto user machines where they have the crystal runtime installed, the report keeps asking for a parameter value for the subreport.
I cannot get this to stop happening.
This report is urgently required. PLEASE could someone help me out here.
I am at my wits end.
I have attached a zipe file containing the following:
- the two stored procedure
- the rpt file
- a sample report
- a screen showing the report having just been generated
Thanks in advance,
Robert Lancaster

Hi Robert,I see your report template and stored procedures. All seems to be ok. The most important is to assign the report parameters for all linked subreports (only one in your case). Try this (in C#, in VB.NET the code are very similary): ReportDocument report = new ReportDocument(@"TopFortyReport.rpt");AssignParameters(report, paramCollection);// and now assign parameters to all linked subreports foreach( CrystalDecisions.CrystalReports.Engine.Section section in report.ReportDefinition.Sections){ foreach (CrystalDecisions.CrystalReports.Engine.ReportObject reportObject in section.ReportObjects) { if (reportObject.Kind == ReportObjectKind.SubreportObject) { SubreportObject subReport = (SubreportObject)reportObject; ReportDocument subDocument = subReport.OpenSubreport(subReport.SubreportName); AssignParameters(subDocument, paramsCollection); }} void AssignParameters(ReportDocument report, object[] paramsCollection){ int nParams = paramsCollection.Length; for (int iParamIndex = 0; iParamIndex < nParams; iParamIndex++) { if (report.DataDefinition.ParameterFields[iParamIndex].IsLinked()) continue; report.SetParameterValue(iParamIndex, paramsCollection[iParamIndex]); }}

Missing parameter values when trying to export to pdf in C#

HI all,

I'm having a problem passing a parameter from my c#.NET code through Crystal Reports 2008...

Crystal Reports Developer version 12.1.0.892
using a WinXP machine
The parameter I've setted up in Crystal Reports Design is one to dynamically change the query that will run on the report:
"SELECT * FROM REPORTS.{?Protocolname}_FC_QUERY"


The code I use calling one of the reports I must provide:

using System;
using System.Collections.Generic;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using System.Data;
using System.Data.OracleClient;
using System.Collections;
namespace CrystalReportsRapportjes
{
class MainClass
{
public static void Main(string[] args)
{
Console.WriteLine("Start of program!");
string connString = "server=CT_PRD;user id=report;password=report";
OracleConnection conn = new OracleConnection(connString);
try
{
conn.Open();
Console.WriteLine("Connection opened.");

Console.WriteLine("Connection Properties:");
Console.WriteLine("\tConnection String: {0}", conn.ConnectionString);
Console.WriteLine("\tServerVersion: {0}", conn.ServerVersion);
Console.WriteLine("\tState: {0}", conn.State);
QL_ExportReport("C:\\Data\\converted2crystal\\PLANNING_REPORT_params.rpt");

} catch (OracleException e) {
Console.WriteLine("Error: " + e);
} finally {
conn.Close();
Console.WriteLine("Connection closed.");
}
Console.WriteLine("End of program!");
Console.ReadKey();
}
private static void QL_ExportReport(string reportName)
{
ReportDocument CR_reportDocument = new ReportDocument();
DataSet ds = new DataSet();
CR_reportDocument.Load(reportName);
CR_reportDocument.SetDatabaseLogon("Reports", "Reports");
for(int i=0;i<CR_reportDocument.DataDefinition.ParameterFields.Count; i++)
{
Console.WriteLine("Reading parameters");
Console.WriteLine(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName);
if(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName==
"Protocolname")
Console.WriteLine("Correct parameter found, now assigning value");
ParameterValues ThisPV = new ParameterValues();
ThisPV.AddValue("TMC999C999");
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.Clear();
CR_reportDocument.DataDefinition.ParameterFields.DefaultValues.Clear();

CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
//CR_reportDocument.SetParameterValue("Protocolname","TMC999C999");
//CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
}
CR_reportDocument.Refresh();
CR_reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat,"C:\\Data\\converted2crystal\\EDC_PLANNING_RPT_params.pdf");
CR_reportDocument.Close();
}
}
}

The exceptions he throws using this code is = CrystalDecisions.CrystalReports.Engine.ParameterFieldCurrentValueException: Missing parameter values. ---> System.Runtime.InteropServices.COMException: Missing parameter values.
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 72
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33

When I use the code
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
instead of
CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;

the error I get there is:
System.ArgumentException: Value does not fall within the expected range.
at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
at CrystalDecisions.Shared.ParameterValues.AddValue
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33



Can someone please tell me what's the right way passing a parameter to a report?

Thanks in advance.

You should use the
ReportDocument.SetParameterValue("ParameterName", "ParamValue");
>
Els Cochez wrote:
> When I use the code
> CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
> instead of
> CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
> 
> the error I get there is:
> System.ArgumentException: Value does not fall within the expected range.
> at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
> at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
> at CrystalDecisions.Shared.ParameterValues.AddValue
> at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
> at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33
> 
> 
> Can someone please tell me what's the right way passing a parameter to a report?
> 
Try parsing the parameter value to a decimal value before setting it as parameter value.
Hope this will help

"Missing parameter values " when passing parameter to subreport

i have a subreport embedded in main report.
sub report take a procedure with parameter.the main report does nothing but only holds many sub report.now i have to pass parameter from code to sub report.ive used the following code but it gives "missing parameter values" error
Any help??
   ParameterField paramField = new ParameterField();
        ParameterFields paramFields = new ParameterFields();
        ParameterDiscreteValue paramDiscreteValue = new ParameterDiscreteValue();
        paramField.Name = "@LabNo";
        paramDiscreteValue.Value = "1034";
        paramFields.Add(paramField);
        ParameterValues paramvalues = new ParameterValues();
       paramvalues.Add(paramDiscreteValue);
        paramField.CurrentValues.Add(paramDiscreteValue);
rptDocument.ParameterFields[0].CurrentValues = paramvalues;

does the sub report have parameters in it as well?
if the sp used for the sub report has parameters you need to pass them to the sub. i would probably remove the parameters from the sub and join the sub to the main by the parameter from the main to the field in the sub.

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

How to get the URL parameter value when navigating from JSP Page to portal

Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi M

Hi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar

What value for parameter Workspace when run function RSAQ_DELETE_QUERY?

Run function RSAQ_DELETE_QUERY to delete a query, it requires to input a Workspace value, what's that? and which value we should input for this parameter Workspace?
Thanks

Hi Kevin,
I think you can just leave it space. In the popup, don't enter a value and press enter.
Siggi
PS: Don't forget, this is not a tested solution.
Message was edited by: Siegfried Szameitat

Subreport displays "..Missing parameter values" when published

I would like some expert knowledge on the issue i'm currently having with a transaction report that I've developed. I have one main report with all the db tables linked.
I have two parameters field defined, one is part id, the other is date issue.
I have 3 report footers defined: 1=issues subreport, 2=adjustments subreport, 3=cycle counts
The subreports has a subreport link for Part id and one for the date issue, date adjustment, and date cycle counted. I've also created in each of the subreports a date parameter field or else these data will not display on the primary report correctly.
When i run this report in my Crystal Reports XI pro software, it works fine, all transactions are captured and everything is great.
When i publish this report onto the Crystal reports enterprise server, after entering the two values on the main report, the report errors with [COMException: Missing paramter values].
I know that there is a subreport linkage problem that i have or I'm doing something backwards but any suggestions would be greatly appreciated.
Regards,
Linda

Thank you for the response Sharon but it is still not working for me. Here is more details if anyone has any feedbacks to give.
Main report:
Has 5 db tables linked, a counts table, a parts table, a detail table, a receipts table, and a adjustment table.
Parameter fields on the Main report:
1 for part id
1 for date issue range <this range should match to the other 3 sub-reports>
Sub-Reports: <example>
Receipts sub
Adjustment sub
Count sub
Example: The report footers where these subreports reside, all their subreport links are:
partid --> ?Pm-<tablename>partid with check in the select data in subreport based on field <tablename>partid
receivedate --> ?Pm<tablename>receive date with no checkbox
same for other 3 = this is the only way the data displays correctly.
All sub-reports have the following parameter fields:
Pm-<tablename.Part>
Receiptdate
Pm-<tablename.receipt date>
Pm<tablename.part>
adjustmentdate
Pm<tablename.adjustment date>
Pm<tablemname.part>
countdate
Pm<tablename.count date>
When i press the refresh on the main report, all of the date ranges comes up, i enter the value in all of the ranges, and the data displays accurately and correctly.
Because the 3 prompts in the sub-reports are not on the main report, i think this is where the problem when i publish the report on the server it errors with missing parameters.
Thank you

To SET HANDLER for parameter value

Dear Gurus,
When the user enters a plant value in PARAMETER then i need to hide some of the Screen fields.
But the system has to trigger the PAI automatically
I know this can be acheived using CL_GUI_CFW but how to implement the SET HANDLER method for a parameter
I searched and found the HANDLER METHODS for ALV, TREE, TIMER etc but I want it for SELECTION-SCREEN elements.
I searched WIKI.SDN.SAP.COM and SDN and other stuff.
Please provide me sample code possibly
Please guide me.
Regards
Ramchander Rao.K

for selecion screens, I have this:
PARAMETERS p_cebe TYPE char01 RADIOBUTTON GROUP grp1 DEFAULT 'X' USER-COMMAND flag.
           PARAMETERS p_ceco TYPE char01 RADIOBUTTON GROUP grp1.
PARAMETERS: p_kokrs LIKE cobk-kokrs DEFAULT 'CORP' MODIF ID cec,
                                    p_gjahr LIKE cobk-gjahr                MODIF ID cec.
         PARAMETERS : p_rbukrs LIKE faglflexp-rbukrs MODIF ID ceb,
                                   p_ryear LIKE faglflexp-ryear   MODIF ID ceb,
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_cebe = 'X' AND screen-group1 = 'CEC'.
      screen-active = '0'.
    ENDIF.
    IF p_ceco = 'X' AND screen-group1 = 'CEB'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.

Column values shift towards left for null values when export to excel

Post Author: pssuresh
CA Forum: Exporting
All,
I have a strange problem when using crystal report 10 export through C# Code. Consider in a row there are 3 columns and i am exporting to excel. ex.Student_id,Student_name,Student_Section. If Student_name values are null, then student_section values get displayed under student_name. There is a column shift towards left when there are null values. If anybody has already faced this problem, please post ur answer.
Note: When i just export to excel directly from crystal report, it works fine. i face problem only when i export through .Net code. I guess it is the problem with some formatting through code. if any body has fix, let me know.
Thanks,
Suresh.P.S

Post Author: pssuresh
CA Forum: Exporting
Thanks for your reply. Even i have done the same thing yesterday to solve that problem. But we have nearly 100 of reports and started migrating now. The best solution crystal reports suggest is this.
http://support.businessobjects.com/library/kbase/articles/c2014430.asp
Thanks,
Suresh.P.S

Rule for parameter values when portlet defined?

Similar Messages

Maybe you are looking for