Rule loop has not stabilised

Hi,
Often I get this error while running rulebase ..
Rule loop has not stabilised after 2000 iterations.
at com.oracle.determinations.engine.local.LocalSession.thinkStep(LocalSession.java:739)
at com.oracle.determinations.engine.local.LocalSession.think(LocalSession.java:784)
Can anyone know why this error comes?
Thanks,
Rajan

This means you've created a rule loop, but haven't made sure that the chain always has a defined start.
Make sure that in every case the logic has a shortcut that prevents it looping endlessly.
Go to the OPM help, and search for "rule loop": http://docs.oracle.com/html/E38269_01/toc.htm
You will find this topic is the top hit: http://docs.oracle.com/html/E38269_01/Content/Writing%20rules/Model_loops_in_rule_logic.htm
Davin.
Edited by: Davin Fifield on 13-Feb-2013 15:29

Similar Messages

  • Business Rule Repository has not been configured?

    Hi,
    In EAS trying to open Business Rules, I get "Repository has not been configured or you are not authorized to use Business Rules" (I get this with the admin creds)
    In details, "Error loading objects from Data Source", "SQLSyntaxExceptionError: ORA-00942 table or view does not exist"
    This is relatively new Production install running v. 11.1.2.1
    I ran into this after my LCM migration of a Planning app failed, unable to create business rules.
    IT folks tell me "the database looks fine" when I asked them about the ORA-00942 table.
    Can anyone help point me to a configuration step that might have been missed?
    Everything works in development environment, so if there's something to compare between the two, I'd appreciate any help.
    Thanks,

    Its necessary to do the following
    SE80 -> BSP Application -> Tunguska -> Pages with Flow Logic -> start_sts.htm   or  start_sts2.htm-> Right click & display in same window -> Properties tab -> Transfer Options -> HTTPS should be UNCHECKED.

  • Rule loop debugging

    What is the best approach to resolve rule loops in a higly complex rule loops.
    I understand what is rule loop but want to know to understand approaches.
    Thanks

    Using the debugger, you should make sure you follow your well-grounded data chain back through the relationships the rule loop relies upon, all the way to a point that does not have any further dependencies. You'll probably also want to make sure all the relationships participating in the loop are marked as complete.
    If your rule loop is not terminating, then that suggests your data relationships are not well grounded. You will need to remove from the session data as many specific entries from the relationships as you need to until you can get the rule loop to terminate. That will give you a starting point to understand why there is a data loop that is preventing the rule loop from stabilising.
    Hope that helps.
    Davin.

  • Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

    sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

    sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
    I want to pass along a couple of tips that will get you more and better response on this list.
    1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
    2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
    3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
    4) If you have a question first search the examples for something tha
    t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
    5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
    6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
    Trying to help,
    Welcome to the forum!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

    I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

    If you want to use it, click Review and check your account information.  Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

  • Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

    Nope. It just opened the installer and stayed in the same loop.
    It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
    Eveything was working fine until the mountain lion failed install.

  • Rule loop and RaiseEvent

    Hi All,
    How to use rule loop to raise custom events? how raise custom events works? there is not much given in the OPM help on this.
    thanks,
    Edited by: OPAUser on Jan 17, 2013 2:48 AM

    THE OPM User's Guide has some information; search on the word "event" or "rule loop".
    There is a section in the user guide called "Use rules to trigger external software applications" that mentions custom event rule and raiseevent.
    There is another section called 'Model Loops in Rule Logic".
    Edited by: 941611 on Jan 17, 2013 7:25 AM

  • Prepare has not been completed succesfully

    Hi Experts,
    I started an upgrade release 4.6C to ECC 6.0 on windows 2003 db version is SQL Server 2005,
    I am getting an error message at the begining of prepare phase,
    I've also updated sapup.exe version and source system kernel to 2364,
    how can i prevent this error,
    ERROR: PREPARE has not been completed successfully.
    Correct the problems reported by PREPARE otherwise
    you cannot start the upgrade.
    here is UpgDialog.log
    Target SAP system is AHQ
    Enter the SAP instance number [00]:
    ? INSTANCE NUMBER   =
    Waiting for input since 30.Eki.2008 10:31:46
    > INSTANCE NUMBER   =  00
    Type of database system is mss
      >>>>>>>>>> Input Wizard <<<<<<<<<<
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 01 = E:\upgdvds\upgmaster_51033520\UMN_WINDOWS_I386
    Reading data from "Upgrade Master CD/DVD"...
    SAP  UPGRADE  CONTROL  PROGRAM
    ================================
    This is SAPup version 7.00/3 upgrade to release
            600 of EA-APPL
            600 of EA-DFPS
            600 of EA-FINSERV
            600 of EA-GLTRADE
            600 of EA-HR
            400 of EA-IPPE
            600 of EA-PS
            600 of EA-RETAIL
            600 of ECC-DIMP
            600 of ERECRUIT
            600 of FI-CA
            600 of FI-CAX
            600 of FINBASIS
            600 of INSURANCE
            600 of IS-CWM
            600 of IS-H
            600 of IS-M
            600 of IS-OIL
            600 of IS-PS-CA
            600 of IS-UT
            600 of LSOFE
            2005_1_700 of PI_BASIS
            700 of SAP_ABA
            700 of SAP_AP
            600 of SAP_APPL
            700 of SAP_BASIS
            700 of SAP_BW
            600 of SAP_HR
            600 of SEM-BW
            2005_1_700 of ST-PI
    Target SAP system is AHQ, MSSQL database
    ? continue
    ? cancel
    Waiting for input since 30.Eki.2008 10:34:32
    > continue
    ERROR: PREPARE has not been completed successfully.
    Correct the problems reported by PREPARE otherwise
    you cannot start the upgrade.
    ? continue
    ? cancel
    And also in /usr/sap/put/log directoy these logs existent;
    SAPup.log;
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    SEVERE ERROR: problems with SERVER mode - abort
    ...CANCELED at 20081030104921.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030105012
    ...end dialogue at 20081030105013
    ...begin dialogue at 20081030105013
    ...end dialogue at 20081030105015
    ...begin dialogue at 20081030105034
    ...end dialogue at 20081030105039
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105039
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030105039
    ...end dialogue at 20081030105041
    ...STARTED at 20081030105041.
    Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105041
    Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105041
    ...begin dialogue at 20081030105041
    ...end dialogue at 20081030105104
    ...CANCELED at 20081030105104.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.011.
    ...begin dialogue at 20081030105626
    ...end dialogue at 20081030105627
    ...begin dialogue at 20081030105627
    ...end dialogue at 20081030105630
    ...begin dialogue at 20081030105711
    ...end dialogue at 20081030105715
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105715
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030105715
    ...end dialogue at 20081030105719
    ...CANCELED at 20081030105719.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030105752
    ...end dialogue at 20081030105753
    ...begin dialogue at 20081030105753
    ...end dialogue at 20081030105756
    ...begin dialogue at 20081030105814
    ...end dialogue at 20081030105818
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105818
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030105818
    ...end dialogue at 20081030105824
    ...STARTED at 20081030105824.
    Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105824
    Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105824
    ...begin dialogue at 20081030105824
    ...end dialogue at 20081030110026
    ...CANCELED at 20081030110026.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030110034
    ...end dialogue at 20081030110035
    ...begin dialogue at 20081030110035
    ...end dialogue at 20081030110038
    ...begin dialogue at 20081030110054
    ...end dialogue at 20081030110104
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110104
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030110104
    ...end dialogue at 20081030110123
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030110134
    ...end dialogue at 20081030110140
    ...begin dialogue at 20081030110140
    ...end dialogue at 20081030110143
    ...begin dialogue at 20081030110149
    ...end dialogue at 20081030110154
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110154
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030110154
    ...end dialogue at 20081030110155
    ...STARTED at 20081030110155.
    Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110155
    Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110155
    ...begin dialogue at 20081030110155
    ...end dialogue at 20081030110328
    ...CANCELED at 20081030110328.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030110335
    ...end dialogue at 20081030110335
    ...begin dialogue at 20081030110335
    ...end dialogue at 20081030110337
    ...begin dialogue at 20081030110342
    SEVERE ERROR: problems with SERVER mode - abort
    ...CANCELED at 20081030110342.
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/3 patch level 25.013.
    ...begin dialogue at 20081030110858
    ...end dialogue at 20081030110859
    ...begin dialogue at 20081030110859
    ...end dialogue at 20081030110901
    ...begin dialogue at 20081030110937
    ...end dialogue at 20081030110940
    Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110940
    Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
    Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
    Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
    ...begin dialogue at 20081030110940
    ...end dialogue at 20081030110941
    ...STARTED at 20081030110941.
    Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110941
    Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110941
    ...begin dialogue at 20081030110941
    ...end dialogue at 20081030110945
    ...CANCELED at 20081030110945.
    CHANGES.LOG
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030104921"
    "20081030104921"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105012"
    "20081030105012"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105013"
    "20081030105013"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105013"
    "20081030105013"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105015"
    "20081030105015"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105034"
    "20081030105034"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105039"
    "20081030105039"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105039"
    "20081030105039"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105041"
    "20081030105041"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "STO_IR"
    "20081030105041"
    "20081030105041"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105041"
    "20081030105041"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105104"
    "20081030105104"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030105104"
    "20081030105104"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105626"
    "20081030105626"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105627"
    "20081030105627"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105627"
    "20081030105627"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105630"
    "20081030105630"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105711"
    "20081030105711"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105715"
    "20081030105715"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105715"
    "20081030105715"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105719"
    "20081030105719"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030105719"
    "20081030105719"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105752"
    "20081030105752"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105753"
    "20081030105753"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105753"
    "20081030105753"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105756"
    "20081030105756"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105814"
    "20081030105814"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105818"
    "20081030105818"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105818"
    "20081030105818"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030105824"
    "20081030105824"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "STO_IR"
    "20081030105824"
    "20081030105824"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030105824"
    "20081030105824"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110026"
    "20081030110026"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030110026"
    "20081030110026"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110034"
    "20081030110034"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110035"
    "20081030110035"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110035"
    "20081030110035"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110038"
    "20081030110038"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110054"
    "20081030110054"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110104"
    "20081030110104"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110104"
    "20081030110104"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110123"
    "20081030110123"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110134"
    "20081030110134"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110140"
    "20081030110140"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110140"
    "20081030110140"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110143"
    "20081030110143"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110149"
    "20081030110149"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110154"
    "20081030110154"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110154"
    "20081030110154"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110155"
    "20081030110155"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "STO_IR"
    "20081030110155"
    "20081030110155"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110155"
    "20081030110155"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110328"
    "20081030110328"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030110328"
    "20081030110328"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110335"
    "20081030110335"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110335"
    "20081030110335"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110335"
    "20081030110335"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110337"
    "20081030110337"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110342"
    "20081030110342"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030110342"
    "20081030110342"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110858"
    "20081030110858"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110859"
    "20081030110859"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110859"
    "20081030110859"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110901"
    "20081030110901"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110937"
    "20081030110937"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110940"
    "20081030110940"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110940"
    "20081030110940"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110941"
    "20081030110941"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "STO_IR"
    "20081030110941"
    "20081030110941"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "DIA_IR"
    "20081030110941"
    "20081030110941"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "END_IR"
    "DIA_IR"
    "20081030110945"
    "20081030110945"
    "0"
    "0"
    "0"
    "0"
    MILESTONE
    "BEG_IR"
    "STO_IR"
    "20081030110945"
    "20081030110945"
    "0"
    "0"
    "0"
    "0"
    TOOLOUT.LOG
    SAPup>  Starting subprocess disp+work.exe with id 732 at 20081030103432
    EXECUTING C:\usr\sap\AHQ\SYS\exe\run\disp+work.exe -V
    disp+work information
    kernel release                46D
    kernel make variant           46D
    DBMS client library           SQL_Server_7.00                
    DBSL shared library version   46D.00
    compiled on                   NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00
    compile time                  Jan 14 2008 08:47:41
    update level                  0
    patch number                  2364
    source id                     0.2364
    supported environment
    database (SAP, table SVERS)   46A
                                  46B
                                  46C
                                  46D
    DBMS server                   MSSQL 6.5.213 or higher
                                  MSSQL 7.0.1 or higher
    operating system              Windows NT 4.0
                                  Windows NT 5.0
                                  Windows NT 5.1
                                  Windows NT 5.2
                                                                                    System build information:
                                  LCHN  : 955407
    disp+work patch information
    ( 0.001) Correct cursor preservation (I) (note 307486)
    ( 0.002) SU53 reports always 'Check on S_TCODE SU53' (note 310513)
    ( 0.003) PXA: Emergency mode (note 307976)
    ( 0.004) Correct shortcut handling under EASY ACCESS (note 309791)
    ( 0.005) POST driver: no set locale (note 310076)
    ( 0.006) ASSIGN attr+off(len) TO <fs> (note 302214)
    ( 0.007) Contextmenu for tableview cells (note 309755)
    ( 0.008) Rfc and full screen (note 308383)
    ( 0.009) Dropdown listbox performance (note 307795)
    ( 0.010) Correct cursor preservation (II) (note 307486)
    ( 0.011) Spool-Patch-Collection 26 (note 92482)
    ( 0.012) Correct cursor preservation (III) (note 307486)
    ( 0.013) Correct cursor preservation (IV) (note 307486)
    ( 0.014) Core in dyCheckRadioGroups() (note 308958)
    ( 0.019) STAT: DB Resonse Time for SQL Server (note 310288)
    ( 0.021) Rfc authority problem (note 93254)
    ( 0.024) RFC extended trace information (note 311386)
    ( 0.027) CALL SCREEN: error 'MISMATCH DYNPRO NAME / CONTENT' (note 310186)
    ( 0.028) ABAP: OO-Transactions and event LOAD-OF-PROGRAM (note 312244)
    ( 0.029) Profile 'abap/oo_warn' suppress OO-context errors (note 182767)
    ( 0.031) Occasional core when reading statistics file (note 313669)
    ( 0.032) ABAP: unnecessary class-constructor calls (2) (note 213622)
    ( 0.035) Corrections in errormessage handling (sapdext) (note 312252)
    ( 0.040) TSTC: transaction is not an oo-transaction (note 315037)
    ( 0.044) F4 on checkbuttons (note 312258)
    ( 0.045) Core in moveleft() (note 312418)
    ( 0.046) Error trace: invalid dynpro dynpabsv.c 3490 (note 314373)
    ( 0.047) Error trace: memory conflict diagscrol.c (note 313967)
    ( 0.048) Iterator problem with iXML collections fixed (note 315119)
    ( 0.050) Invocation of not-implemented methods (note 314064)
    ( 0.051) Core at dynamic invoke with interface reference (note 314487)
    ( 0.052) GW: Avoid multiple send (note 314495)
    ( 0.053) Spool-Patch-Collection 27 (note 92482)
    ( 0.054) Printing via e-mail (note 311037)
    ( 0.055) User default time zone from TTZCU-TZONEDEF (note 314300)
    ( 0.056) Bad batch job statistic (note 315147)
    ( 0.057) LOOP AT SCREEN: counter field increased (note 314516)
    ( 0.058) Missing init. in temse (note 314094)
    ( 0.065) GW: shared block leak with multiple reg programs (note 309969)
    ( 0.067) RFC: load balancing over SAPRouter (note 316221)
    ( 0.068) No debugging until login while remote debugging (note 316456)
    ( 0.069) Open SQL: INTO CORRESPONDING with JOINs (note 315747)
    ( 0.071) Support 'Windows NT 5.1' (note 316188)
    ( 0.072) Destroyed dynpro load (note 207817)
    ( 0.073) Error in spool entry queue (note 316148)
    ( 0.074) mySAP.com workplace single signon enabling (note 177895)
    ( 0.075) Sap statistic destroys eye catcher (note 317178)
    ( 0.076) Syslog messages while printing (note 316630)
    ( 0.077) Performance optimization for list boxes (note 214806)
    ( 0.078) Loop in batch input (note 316686)
    ( 0.080) Loop in batch input 2 (note 316686)
    ( 0.081) Don't block s-messages in local update processing (note 312252)
    ( 0.084) Correct error message in conversion exit 'ALPHA' (note 318027)
    ( 0.085) Destroyed dynpro load (note 207817)
    ( 0.086) Print from rfc server (note 318692)
    ( 0.087) Unknown syntax errors after changing the kernel (note 142888)
    ( 0.088) RFC: error discarding unneeded tables (note 319634)
    ( 0.089) Sapstartsrv handle service stop and shutdown correctly (note 142100)
    ( 0.091) GW: Nonblocking connect problems (note 319675)
    ( 0.092) Tstc: transaction is not an oo-transaction (note 315037)
    ( 0.093) Coredump with 'INSERT LINES OF ...' (note 142100)
    ( 0.094) Corrupted cluster item displayed (note 318904)
    ( 0.096) BDC: Enable input in list screens (note 212569)
    ( 0.099) Hanging apps after writing core (note 320168)
    ( 0.102) Syntax warning for literals crossing line boundaries (note 319328)
    ( 0.103) Generation error at statement 'IF itab IS SUPPLIED' (note 321069)
    ( 0.105) Spool-Patch-Collection 28 (note 92482)
    ( 0.109) Several errors within footline (note 312848)
    ( 0.111) Check dynpro processor state (note 301406)
    ( 0.112) Memory usage roll area 0+1 (note 322070)
    ( 0.113) Sapstartsrv: GetProcessList exception, librfc32 delayload (note 142100)
    ( 0.114) Rfc call and default fontsize data (note 323342)
    ( 0.115) OBJECTS_NOT_COMPATIBLE with READ TABLE (note 323039)
    ( 0.116) Random syntax errors (MOVE-CORRESPONDING) (note 207149)
    ( 0.117) SKIP 1ST SCREEN: ignore GRAPH dynpros (note 317917)
    ( 0.118) Japanese IXML, table TCP0F (note 301406)
    ( 0.119) SE30 errors (note 170470)
    ( 0.121) Correct call of POV modules for comboboxes (note 323141)
    ( 0.122) Exception in NiExit (note 319675)
    ( 0.123) GW: No restart during db reconnect (note 321863)
    ( 0.125) TX variants: correct reset field input (note 325275)
    ( 0.126) ITS_LOGIN_CHECK_RFC rejected as XXPASS caller (note 324758)
    ( 0.129) Error message: correct cursor setting (note 318292)
    ( 0.130) Check dynpro processor state (II) (note 301406)
    ( 0.131) Correct SET FOCUS CONTROL for NO-PAI (note 322455)
    ( 0.132) Init tcview components (note 323686)
    ( 0.133) BDC: No loosing track of data during F4-Help (note 323061)
    ( 0.136) BDC: Avoid duplicate messages in log (note 324490)
    ( 0.138) Resize: docking control - dynpro (note 323974)
    ( 0.139) GW: Secinfo for start of external programs (note 323925)
    ( 0.140) False error texts for workplace ticket logon (note 325222)
    ( 0.141) "user locked" for logon attempt at CUA master system (note 325213)
    ( 0.143) HPL2 driver: unreadable text for green/red (note 323460)
    ( 0.146) Loop of dispatcher (note 325559)
    ( 0.148) Spool-Patch-Collection 29 (note 92482)
    ( 0.149) Control Framework global flush mode (note 316243)
    ( 0.150) TX variants: correct reset field input (II) (note 325275)
    ( 0.152) Em detach before process restart (note 326876)
    ( 0.153) Workplace: multiple logon popup for wingui sessions (note 326604)
    ( 0.154) ABAP Debugger: Rollback before restart (note 325903)
    ( 0.156) Conversion X to STRING (note 327086)
    ( 0.158) Bugfix new-page print on + message (note 107321)
    ( 0.159) IXML: coredump when parsing empty XML document (note 326888)
    ( 0.160) Resume in current screen after returning from exit module (note 327803)
    ( 0.161) SORT: close extract file, if runtime error occurs (note 328691)
    ( 0.162) Adapt ABAP runtime to new signal handling (note 329091)
    ( 0.163) BDC: corresponding screen to bsdup-entry in dybimsgi (note 330071)
    ( 0.164) Stat-file is not deleted in old 4.6 releases (note 329603)
    ( 0.169) Do not change loopheader during help processing (note 330761)
    ( 0.171) Disabling GUI in aRFC when called from tRFC (note 329811)
    ( 0.174) Test dynpro: do not call POV modules (note 332538)
    ( 0.175) No commit during wait in update task (note 332077)
    ( 0.176) Printing frames in text mode (note 320792)
    ( 0.177) Spool-Patch-Collection 30 (note 92482)
    ( 0.178) TSTC transaction is not an oo-transaction (note 315037)
    ( 0.179) RFC-Import of deep structures failed (note 333694)
    ( 0.180) STRING_BAD_REF in control break processing (note 332663)
    ( 0.181) Increase structure stack (note 332500)
    ( 0.184) PXA: initialization (note 160875)
    ( 0.185) PXA_NO_FREE_SPACE (note 147568)
    ( 0.186) Update task: increase vb2Cnt for update type 5 (note 333878)
    ( 0.187) Correct handling of empty loop lines (note 334886)
    ( 0.188) TX variants: correct reset field input (III) (note 325275)
    ( 0.189) EmHyperContextCreate() => alreday exists (note 334389)
    ( 0.192) Default cursor: reset cursor offset (note 334951)
    ( 0.194) Invalid client index of sap gateway (note 333949)
    ( 0.195) RFC authority check failed (note 93254)
    ( 0.196) BDC: No loosing track of data after F4-Help (note 323061)
    ( 0.197) ABAP: optimized dynamic SELECT clauses (note 324772)
    ( 0.198) Bugfix new-page print on + message (note 107321)
    ( 0.199) Bugfix displaying printer name after print (note 107321)
    ( 0.201) Error recovery (in ni datagram) after workprocess-restart (note 335967)
    ( 0.207) Diag: correct list size (note 337298)
    ( 0.209) GW: memory block freed twice (note 337957)
    ( 0.210) Incorrect logon ticket expiration calculation  (note 337794)
    ( 0.218) Errortrace: invalid offset (dybasfield.c 95) (note 337820)
    ( 0.219) Deactivate LIST TO MEMORY on selection screen (note 313558)
    ( 0.220) Dbbmng0.c: generic invalidation of shared buffer objects (note 338451)
    ( 0.221) Itab operations on tableview-controls (note 339270)
    ( 0.222) GW: RFC attached gui (note 337425)
    ( 0.223) ASSIGN: set output length accurately (note 338925)
    ( 0.224) Tabstrip pages and wrong scroll offset (note 339469)
    ( 0.225) Set pf-status excluding and rollout (note 338954)
    ( 0.226) Auth problems with 20 characters transactions (note 339913)
    ( 0.227) Batch input: new algorithm for QID-generation (note 338246)
    ( 0.229) Inappropriate short dump ZDATE_ILLEGAL_LOCTIME (note 323954)
    ( 0.230) Print of a list dumps (note 338994)
    ( 0.231) Archive device (note 339659)
    ( 0.232) S-messages in CTU-log (note 339302)
    ( 0.238) Correct trace SET PARAMETER (note 340096)
    ( 0.240) Print of a list dumps (II) (note 338994)
    ( 0.242) Start Row Start Column for Dynproresizing (note 351685)
    ( 0.243) GW: Bad em context handling (note 351526)
    ( 0.244) SORT AS TEXT: length too short (note 350526)
    ( 0.245) Get cursor information on pushbutton (note 351890)
    ( 0.247) ABAP: Slin default check; type I vs. type P (note 351976)
    ( 0.248) GW: CCMS Monitoring Patch-Collection 1 (note 202591)
    ( 0.249) Short dump CALL_TRANSACTION_LOCKED (note 350360)
    ( 0.250) Controls and list processing (note 352065)
    ( 0.251) Blanks in authorization values (note 207196)
    ( 0.252) Tableview line/column selection (note 350363)
    ( 0.253) Spool-Patch-Collection 31 (note 352269)
    ( 0.254) Decrease and increase for dynpro and window (note 352542)
    ( 0.255) ABAP Debugger: Avoid DEBUGGER_ILLEGAL_VALUE in RFC-Debug. (note 182989)
    ( 0.256) Incomplete DATA in D010INC and D010TAB (note 352480)
    ( 0.257) Diag: warning and resize (note 212524)
    ( 0.258) Workplace: provide logon ticket for X.509 logon (note 350776)
    ( 0.260) StartRow StartColumn for Dynproresizing (note 351685)
    ( 0.261) EmHyperContexts: reduce memory consumption (note 353103)
    ( 0.262) Invalid focus memory (note 353496)
    ( 0.263) EmHyperContexts: reduce memory consumption (II) (note 353103)
    ( 0.266) Slow SetQoS due to unnecessary DNS query (note 180940)
    ( 0.268) ABAP-Exception-Handling: Internal State-Stack (note 350146)
    ( 0.269) BDC: no user command allowed on SAPMSYST 0040 (note 163639)
    ( 0.270) Wrong portability warnings from extended syntax check (note 353681)
    ( 0.271) Passing EXP-IMP parameters in RFC calls (note 352629)
    ( 0.272) Spool-Patch-Collection 31a (note 352269)
    ( 0.273) Modal level and suppress dialog (note 355616)
    ( 0.274) DBIF_RSQL_INVALID_REQUEST with very old cluster records (note 353651)
    ( 0.275) Horizontal radiobutton groups (note 355260)
    ( 0.276) Proportional cut for variable Dynpro-objects (note 351685)
    ( 0.277) Hostname resolution blocks processes (note 356788)
    ( 0.278) Tabstrip pages and wrong scroll offset (note 339469)
    ( 0.280) Core in DiagiTableHeader (note 159421)
    ( 0.281) GW: Bad statistic after summer time switch (note 353893)
    ( 0.283) CPIC-Timeout for frontend printing (note 352269)
    ( 0.284) List scrollbar and docking control (note 357241)
    ( 0.285) Sy-SubRc 8 with SELECT SINGLE on logic cluster table  (note 355714)
    ( 0.287) Missing entry in table FIDO (note 357019)
    ( 0.290) BDC: conversion of old batch-input logfiles (note 356758)
    ( 0.293) Invalid sapgui data (note 358681)
    ( 0.294) Reading of ASTAT records fails in 4.6D (note 358532)
    ( 0.295) ABAP: Loop in function LookForFref (note 357698)
    ( 0.297) Muliconnect error reporting (note 358171)
    ( 0.298) RFC: data dependent read error (note 358557)
    ( 0.300) Protect against 'error in datastream' (note 359511)
    ( 0.301) Treatment of looplines by loc. horiz. resize (note 212861)
    ( 0.302) Initial values with DynpValuesUpdate (note 359873)
    ( 0.303) ABAP: warning for duplicate keys removed (note 359114)
    ( 0.304) Core dump when calling RfcClose (note 359865)
    ( 0.306) Suppression of unnecessary syslog messages (note 359523)
    ( 0.308) System Core Dump with F4-Button in R/3-Dialog(modal) setting (note 212861)
    ( 0.309) Core dump in RFC engine (note 353136)
    ( 0.311) Start EASY-ACCESS only for dialog sessions (note 360980)
    ( 0.314) Check if dynpro exists before access it (note 361120)
    ( 0.315) Optimize concatenate for STRING (note 327185)
    ( 0.317) New RFC logon method 'external identification' (note 358469)
    ( 0.319) List scrolling: last line missing (note 362181)
    ( 0.320) GW: Set locale in update task (note 360971)
    ( 0.321) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS (note 361532)
    ( 0.322) Extended syntax check with BETWEEN ... AND (note 361470)
    ( 0.323) ICMAN fails to open event flags for HTTP connections (note 360696)
    ( 0.326) Open SQL: improved statement generation for UPTO (note 361392)
    ( 0.327) Check (ABAP_ASSERT) in ASSIGN to avoid core (note 363059)
    ( 0.329) Bad NOWP request (note 365156)
    ( 0.330) ABAP; SCAN STRUCTURE: error in SELECT-ENDSELECT logic (note 363992)
    ( 0.331) Native SQL: return code for EXECUTE PROCEDURE (note 364707)
    ( 0.332) Semaphore error in ASTAT (note 363499)
    ( 0.333) Printing with format LETTER (note 363624)
    ( 0.334) Problems with missing or short quickinfo (note 363394)
    ( 0.335) Parameters in macro _splitpathU swapped (note 365337)
    ( 0.339) Modified length mismatch (note 207817)
    ( 0.340) Problems with missing or short quickinfo (2) (note 363394)
    ( 0.341) Errortrace invalid value dybas.c 0179 (note 337820)
    ( 0.342) Errortrace invalid parameter dynpdiag 1131 (note 337820)
    ( 0.343) Errortrace dytracefocus invalid container (note 353496)
    ( 0.346) Spool-Patch-Collection 32 (note 352269)
    ( 0.347) Invalid focus memory 2 (note 353496)
    ( 0.348) Prevent duplicate RFC struct parameter transmission (note 365916)
    ( 0.351) Native SQL: memory leak for stored procedures (note 367509)
    ( 0.352) Resizing side to side and one below other Dynpro-Objects (note 367811)
    ( 0.353) Check ztta/dynpro_area (note 167229)
    ( 0.354) Problems with missing or short quickinfo (3) (note 363394)
    ( 0.355) GW: Bad NOWP request II (note 365156)
    ( 0.358) Breakpoint in ABAP Debugger at CONTINUE (note 368433)
    ( 0.359) Errortrace: should not happen (dycuahlp 1661) (note 369415)
    ( 0.360) Reactivate suspended clients (note 367384)
    ( 0.361) Disable persistent trace for RFC-Library (note 364034)
    ( 0.365) Large file support (note 330992)
    ( 0.366) IMPORT: avoid IMPORT_INIT_DECOMPRESS_FAILES (note 370053)
    ( 0.367) BAPI_USER_CHANGE returns wrong/blank error message (note 369761)
    ( 0.368) ABAP debugger: field display and global TABLES-parameters (note 370103)
    ( 0.369) ABAP debugger: empty source display (note 370717)
    ( 0.370) Saplicense: license buffer not initialized (note 371301)
    ( 0.371) List token in SELECT (note 370587)
    ( 0.373) GW: Duplicate conversation ids in gateway work processes (note 371481)
    ( 0.375) Dynamic Type at CREATE DATA (note 371607)
    ( 0.376) Printing selection page & long transaction (note 370661)
    ( 0.377) Library iXML: correction of CDATA size problem (note 371846)
    ( 0.378) DEC field input for none DDIC fields (note 373047)
    ( 0.379) Spool-Patch-Collection 33 (note 352269)
    ( 0.380) C-Call ABAP_CALLSTACK (note 371779)
    ( 0.381) Loop during decompression of corrupted Sources/Loads (note 374200)
    ( 0.382) Extended table compression for certain RFC connections (note 373452)
    ( 0.383) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS and recursion (note 361532)
    ( 0.384) PostScript error with TrueType fonts (note 373604)
    ( 0.385) XML-Import failed after empty structure tags (note 374447)
    ( 0.386) Disable QoS support by default (note 180940)
    ( 0.387) Message display type (note 368333)
    ( 0.389) DEC field input for none DDIC fields II (note 373047)
    ( 0.390) Long running report (note 373343)
    ( 0.391) Illegal request looping in dispatcher (note 373345)
    ( 0.394) Fix printing selection page & long transaction (note 370661)
    ( 0.397) Reserve address space for Extended Memory (note 373326)
    ( 0.399) VALUE /namespace/const (note 371720)
    ( 0.402) DYNG: get translated buttontexts from D021T (note 363394)
    ( 0.403) Correct returncode for SET_DYNP_FIELD_VALUE (note 374941)
    ( 0.404) Refresh control from screen (note 375251)
    ( 0.406) Receive result of aRFC (note 375356)
    ( 0.410) Disp+Work doesn't start up (note 376242)
    ( 0.414) DEC field input for none DDIC fields (note 373047)
    ( 0.415) Core dump in GenViewGetPbagRudi (note 375055)
    ( 0.416) DBIF_REPO_PART_NOT_FOUND during Garbage-Collection (note 374884)
    ( 0.417) Control focus correction (note 374510)
    ( 0.418) Title problems (note 374560)
    ( 0.419) Window width > 255 cause list problems (note 375856)
    ( 0.420) IS REQUESTED/SUPPLIED and RETURNING parameter (note 375329)
    ( 0.423) DEC field input for none DDIC fields (note 373047)
    ( 0.424) Core in appl info (note 376906)
    ( 0.425) Core in DiagIConvert, if trace level 3 (note 377184)
    ( 0.426) Correction for Spool-Patch-Collection 33 (note 352269)
    ( 0.429) Change default for cursor preservation (note 378706)
    ( 0.430) Error trace from dyariftb() (note 378093)
    ( 0.431) Enqueue table overflow, syslog message corrected (note 378682)
    ( 0.433) DEC field input for none DDIC fields (note 373047)
    ( 0.434) Illegal chars set spooljob to error (note 379119)
    ( 0.435) Debugger: data references and tables of type I (note 378838)
    ( 0.436) Set DISPLAY AGAIN in TH (note 380164)
    ( 0.437) Prepare: several mySAP.com components in one DB (note 379572)
    ( 0.439) Workplace: disable password logon (note 379081)
    ( 0.445) DiagSetCodepage() failed (note 382240)
    ( 0.446) Sapstartsrv update available.log on Start/Stop (note 142100)
    ( 0.447) Ldapreg: ITS LDAP registration (note 379691)
    ( 0.448) GW: Wp stuck in PRIV mode (note 381870)
    ( 0.449) Too many invalidations on USRBF2 (note 319727)
    ( 0.450) Correct static focus on subscreens (note 380809)
    ( 0.451) Correct HOLD DATA message (note 381528)
    ( 0.452) Trace DYNP_SET/GET_STATUS (note 381694)
    ( 0.453) Init screen buffer parameters (note 382032)
    ( 0.454) No core in dypov_treatDpovtabRow (note 381221)
    ( 0.455) Server shutdown after bind error (note 382440)
    ( 0.457) Handling of fatally corrupted cluster records (note 381968)
    ( 0.466) EXPORT: dynamic export of strings (note 384694)
    ( 0.467) Message in help: no core dump (note 384639)
    ( 0.468) Pull up other objects down of table after TABLE_PBO_DONE (note 383033)
    ( 0.469) Tablecontrol init and context (note 373977)
    ( 0.470) Correction of the nls locale check tool (note 40815)
    ( 0.471) GW: Missing aRFC response (note 384015)
    ( 0.472) GW: Core during write of statistic (note 384433)
    ( 0.473) Wp stuck in PRIV mode (II) (note 381870)
    ( 0.474) Shared Pool disturbed corrected (note 384810)
    ( 0.477) SORT/EXTRACT: large file support (note 384257)
    ( 0.478) Codepage problem: sap8000 (shift_jis) (note 384947)
    ( 0.479) Active/Inactive-Handling (note 385628)
    ( 0.480) Sporadic logon failures in batch processing (note 385894)
    ( 0.483) GW: Free unallocated memory (note 387747)
    ( 0.484) SORT/EXTRACT: large file support (II) (note 384257)
    ( 0.487) Open SQL: several minor errors (note 386783)
    ( 0.489) RABAX no dbrollback and dbcommit at core (note 386268)
    ( 0.490) C-call DY_GET_S_MESSAGE available (note 383089)
    ( 0.491) Correct I message for batch input (note 386661)
    ( 0.492) Do not skip message popup (note 385147)
    ( 0.493) Async RFC: set size of full screen (note 385132)
    ( 0.494) Correct error messages for CALL SUBSCREEN (note 386674)
    ( 0.495) Logon tickets slightly too long valid (note 387595)
    ( 0.496) Format error during output of empty strings (note 385796)
    ( 0.497) RFC: patch collection (46D) (note 387366)
    ( 0.498) Method calls in arithmetics (note 387066)
    ( 0.499) Reallocate the number of boxes for resizing (note 388988)
    ( 0.500) Generate correct forkey selects in dynpro (note 388699)
    ( 0.501) Destroyed dynpro load (note 207817)
    ( 0.502) Open a new audit file next day after maxsize event (note 321148)
    ( 0.503) Delete audit files with extended filenames (SM18) (note 370829)
    ( 0.504) DiagSetCodepage() failed (note 382240)
    ( 0.507) Missing arfc response (II) (note 384015)
    ( 0.508) Generation of very long sources: repeating END_INBUF (note 389041)
    ( 0.509) Correct hold control framework focus (note 389364)
    ( 0.510) BDC: F1 or F4-request in bdcdata (note 323061)
    ( 0.511) Overflow of memory (note 370661)
    ( 0.512) PARAMETERS referencing a named DDIC include (note 389940)
    ( 0.515) DB2/390: default dbs/db2/use_hints=abap->1 (note 162034)
    ( 0.516) Recovery from NI-error after WP-restart (note 335967)
    ( 0.517) Avoid RFC server timeout (note 390219)
    ( 0.522) Avoid core in ABAP debugger by bad string references (note 391169)
    ( 0.523) Keep scrollposition (note 391871)
    ( 0.524) ABAP debugger: Display header for bad object reference (note 391187)
    ( 0.530) Enqueue traces during transaction reset (note 392873)
    ( 0.531) Garbage-Collection beyond 600MB (note 393378)
    ( 0.534) Enqueue traces during transaction reset (II) (note 392873)
    ( 0.535) CPICFAIL in smq1 after kernel upgrade (note 394549)
    ( 0.536) APO: correct internal table processing in COM routines (note 395695)
    ( 0.537) DYNPRO_FIELD_CONVERSION on Get Parameter (output) (note 395450)
    ( 0.538) Core in dyGetDataR() (note 395299)
    ( 0.540) Core in DpFreeResource after restart (note 394454)
    ( 0.542) Restore of sy.datar when popping screen (note 393511)
    ( 0.543) Open SQL: Memory leak when updating with %_HINTS (note 393897)
    ( 0.547) List scrolling: last line missing(2) (note 362181)
    ( 0.548) DiagSetCodepage() failed (note 382240)
    ( 0.549) Limit on number of sessions per logon (note 392369)
    ( 0.552) ABAP: error in string access with offset or length (note 396800)
    ( 0.553) Wrong portability warnings from SLIN (note 353681)
    ( 0.555) SY-VLINE in Thai on AS/400 (note 391627)
    ( 0.557) Unsuccessful READ on a SORTED TABLE (note 395205)
    ( 0.559) Sapstartsrv shutdown one process after the other (note 142100)
    ( 0.560) GW: COMPUTE_INT_TIMES_OVERFLOW in SAPLSALK (note 395671)
    ( 0.561) MS: improved trace features (note 396750)
    ( 0.562) ABAP: PERFORM .. CHANGING VALUE(<itab-line>-comp) (note 399078)
    ( 0.564) No hint generation in case of SELECT SINGLE (note 397170)
    ( 0.565) READ TABLE with attribute keys (note 399263)
    ( 0.566) Error in msg-server communication (note 398525)
    ( 0.568) Spool-Patch-Collection 34 (note 352269)
    ( 0.569) GW: Destroyed update start message (note 157840)
    ( 0.576) ABAP debugger: display active calls (note 399920)
    ( 0.577) ABAP debugger: display of interface aliases (note 399915)
    ( 0.578) ABAP: SET LOCALE and SUBMIT / CALL TRANSACTION (note 399918)
    ( 0.579) Enforce minimal patch level for database library (note 400216)
    ( 0.581) Ticket logon resets initial flag (password) (note 402076)
    ( 0.582) New translations cause locks on D020 (note 36795)
    ( 0.585) Catching of problems during string <-> char handling (note 402340)
    ( 0.586) GET LOCALE: language incorrect (note 402801)
    ( 0.587) Icons are not printed properly (note 402967)
    ( 0.588) Em context destroyed after exception (note 403562)
    ( 0.589) Dummy call: super constructor (note 401553)
    ( 0.590) Visibility of local types (note 401910)
    ( 0.591) Coredump with READ TABLE and float attributes (note 400516)
    ( 0.592) Offset/length specifiers in a table key definition (note 402255)
    ( 0.594) Resize: docking control - dynpro (note 323974)
    ( 0.598) Avoid inconsistent overall source time stamp (note 405821)
    ( 0.599) PXA: correct unfound object cache & statistic counters (note 406075)
    ( 0.600) SY-VLINE and JAVASCRIPT in Thai on AS/400 (note 391627)
    ( 0.601) Avoid inconsistent overall source time stamp (II) (note 405821)
    ( 0.605) RFC_DEBUGGING_NO_DIALOG_USER (note 407471)
    ( 0.606) Core in dyAbapGetContainerPosition (note 405930)
    ( 0.607) X.509 certificate logon: timezone not set (note 408601)
    ( 0.608) Unsuccessful READ on a SORTED TABLE (II) (note 409175)
    ( 0.609) IPC, max shm size detection accelerated (note 406738)
    ( 0.610) Graphical characters and page borders (note 406673)
    ( 0.611) SE30: close measurement on /n (note 381500)
    ( 0.612) Detail selection does not work correct (note 400090)
    ( 0.613) Negative value for hdcurrow is not permitted (note 352542)
    ( 0.624) Cutting terminal names (note 412628)
    ( 0.625) Update debugging (note 336925)
    ( 0.626) Control for Table-Control in Resizing is wrong (note 388988)
    ( 0.627) Correct treatment of field symbols (note 406306)
    ( 0.629) Init params of ab_ListGetFieldName (local field symbols) (note 413506)
    ( 0.630) Open SQL: more than 255 alias names in SELECT list (note 411136)
    ( 0.631) Open SQL: wrong SY-DBCNT for FETCH NEXT (note 412399)
    ( 0.632) Core in db_blob (note 412063)
    ( 0.633) Core in DiagGetWindowDimension (note 412168)
    ( 0.634) Core by 'Display current statement' in debugger (LREF) (note 411673)
    ( 0.636) Coredump in PfOpenScratchFile (note 414242)
    ( 0.637) VALUE class=>const (note 413384)
    ( 0.639) Hebrew Sapscript printing causes signal 11 (note 155261)
    ( 0.640) Workarea change in case of SELECT SINGLE with SY-SUBRC 4 (note 410175)
    ( 0.641) Function DB_DBSCHEMA returns correct result now (note 411971)
    ( 0.642) Wrong syntax error at literals in macros (note 411757)
    ( 0.643) Change of an interface (note 411769)
    ( 0.647) Dbbuf: restrict rtbb/buffer_length to 200000 [kB] (note 414220)
    ( 0.649) Inserted option WAN_CONN into RfcOpenEx (note 415169)
    ( 0.650) SU01: error texts for invalid passwords (note 369761)
    ( 0.651) CONVERT TIME STAMP... for 9999/31/12 23:59:59 (note 401610)
    ( 0.653) Text of check- and radiobuttons with icon (note 414703)
    ( 0.654) MESSAGE ... INTO no rabax at message x (note 408740)
    ( 0.655) New list line at program load (note 412142)
    ( 0.656) Displaying frames in lists (note 412787)
    ( 0.657) Selection page and empty report (note 370661)
    ( 0.658) VMIT (NT): higher precision (note 414135)
    ( 0.659) Runtime error DSTEP_WRONG_PROGRAM (note 416350)
    ( 0.660) Core in csulzh.c (note 413899)
    ( 0.661) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
    ( 0.662) Highlighting in Hebrew list printing (note 353987)
    ( 0.663) Extended syntax check with BETWEEN ... AND (2) (note 361470)
    ( 0.664) Breakpoint at (RFC) function module (note 414952)
    ( 0.665) Don't break iXML because of missing character (note 410929)
    ( 0.667) WP opmode switch (note 415840)
    ( 0.674) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
    ( 0.675) Duplicate key in VBMOD (note 416961)
    ( 0.676) Trace spa/gpa memory overflow (note 34533)
    ( 0.677) Dbbuf: check rtbb/buffer_length and rtbb/max_tables (note 414220)
    ( 0.678) Display '?' in DropdownListboxes (note 417405)
    ( 0.679) Correct call dialog for system messages (I) (note 416053)
    ( 0.680) Correct call dialog for system messages (II) (note 417096)
    ( 0.682) Memory leak in short storage (MEMSAV) (note 419819)
    ( 0.683) Spooler C-call info msg in trace (note 418740)
    ( 0.684) Dithering of color bitmaps (note 410727)
    ( 0.685) Standalone enqueue server prepared (note 419283)
    ( 0.686) Correction of the nls locale check tool (note 40815)
    ( 0.687) System Core Dump in C-Destructors of ABAP Objects (note 416163)
    ( 0.688) Q

    Hi Experts,
    After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
    Thanks

  • Field symbol has not yet been assigned. ???

    Dear Experts ,
    W hen i tried to execute my program this error appears :
    Short text
        Field symbol has not yet been assigned.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSLVC" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32821).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    and Here is my CODE :
    *& Report  ZPO
    Report  ZPO1.
    type-pools slis.
      PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
      PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
      PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
      data TtlS type mara-wesch .
      data TtlH type mara-wesch .
      data Ttl type mara-wesch .
      data ZEKBE type TABLE OF EKBE.
      data ZEKBER type EKBE.
      data ZEKPO type TABLE OF EKPO.
      data ZEKPOR type EKPO.
      data ZEKKOR TYPE EKKO.
      data ZNAME1F type LFA1-LIFNR.
      data ZWGBEZF TYPE T023T-WGBEZ.
      data i type n.
      data counter type n.
    types : begin of SBAGDS,
      Serial Type n, "Purchase Order
      EBELN like EKKO-EBELN, "Purchase Order
      MATNR like EKPO-MATNR, "Material
      TXZ01 like EKPO-TXZ01, "Short Text
      MATKL like EKPO-MATKL, "Material Group
      WGBEZ like T023T-WGBEZ, "Material Group Desc"
      SUBMI like EKKO-SUBMI, "GPM
      CHARG like EKBE-CHARG, "Batch
      LIFNR like EKKO-LIFNR, "Vendor
      NAME1 like LFA1-NAME1, "Vendor Name
      RECV like mara-wesch, "Received Quantity
      REVR like mara-wesch, "Reversed Quantity
      DELV like mara-wesch, "Delivered Quantity
    end of SBAGDS .
    DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
    data Struc like BAGDS.
    data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
    data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
    INITIALIZATION.
    i = 0.
    counter = 0 .
    perform field_cat_init using gt_fieldcat[].
    FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
    data: ls_fieldcat type slis_fieldcat_alv,
             pos type i value 1.
    clear LS_FIELDCAT.
    *Column 1
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'Serial'.
    ls_fieldcat-SELTEXT_L      = 'Serial'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 2
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'EBELN'.
    ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 3
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATNR'.
    ls_fieldcat-SELTEXT_L      = 'Material'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 4
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'TXZ01'.
    ls_fieldcat-SELTEXT_L      = 'Short Text'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 5
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATKL'.
    ls_fieldcat-SELTEXT_L      = 'Material Group'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 6
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'WGBEZ'.
    ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 7
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'SUBMI'.
    ls_fieldcat-SELTEXT_L      = 'GPM'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 8
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'CHARG'.
    ls_fieldcat-SELTEXT_L      = 'Batch'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 9
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'LIFNR'.
    ls_fieldcat-SELTEXT_L      = 'Vendor'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 10
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'NAME1'.
    ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 11
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'RECV'.
    ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 12
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'REVR'.
    ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 13
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'DELV'.
    ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    endform.
    START-OF-SELECTION.
           select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
           select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
           select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
    *         ' Buliding Structure
              Struc-EBELN = ZEKPOR-EBELN.
              Struc-SUBMI = ZEKKOR-SUBMI.
              Struc-LIFNR = ZEKKOR-LIFNR.
              Struc-Name1 = ZNAME1F.
           select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
           LOOP at ZEKPO into ZEKPOR.
               select SINGLE WGBEZ from T023T into ZWGBEZF  WHERE MATKL = ZEKPOR-MATKL .
               counter = counter + 1.
    *         ' Buliding Structure
              Struc-Serial = counter.
              Struc-MATNR = ZEKPOR-MATNR.
              Struc-TXZ01 = ZEKPOR-TXZ01.
              Struc-MATKL = ZEKPOR-MATKL.
              Struc-WGBEZ = ZWGBEZF.
    *          Calcualting Debit transactions from PO History
               select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlS = TtlS + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-CHARG = ZEKBER-CHARG.
               Struc-RECV = TtlS.
               Ttl = TtlS.
               clear TtlS.
    *         Calcualting Credit transactions from PO History
             select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlH = TtlH + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-REVR = TtlH.
    *          Calculating Total Delivered
               Ttl = Ttl - TtlH.
               clear TtlH.
    *          ' Buliding Structure
               Struc-DELV = Ttl.
               clear Ttl.
    *      Writtng ITAB
           APPEND Struc to BAGDS.
           ENDLOOP.
    *      Reading ITAB
    *       WRITE : / , 'ITAB Begin : '    .
    *       loop at  BAGDS into Struc.
    *         counter = counter + 1.
    *         write : /,'Serial : ',counter.
    *         write : / ,'PO : ',Struc-EBELN.
    *         write : / ,'Vendor : ',Struc-LIFNR.
    *         write : / ,'Vendor Name : ',Struc-NAME1.
    *         write : / ,'Material : ',Struc-MATNR.
    *         write : /,'Short Text: ',Struc-TXZ01.
    *         write : / ,'Model : ',Struc-MATKL.
    *         write : / ,'Model Desc : ',Struc-WGBEZ.
    *         write : /,'GPM : ',Struc-SUBMI.
    *         write : /,'Lot : ',Struc-CHARG.
    *         write : /,'Received : ',Struc-RECV.
    *         write : /,'Reversed : ',Struc-REVR.
    *         write : /,'Delivered : ',Struc-DELV,/,/,/.
    *       ENDLOOP.
    * Call ALV Grid Viewer
    *BREAK-POINT.
    gr_Table[] = BAGDS[].
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
                 I_STRUCTURE_NAME   = 'SBAGDS'
                 IT_FIELDCAT          = gt_fieldcat[]
            TABLES
                 T_OUTTAB                  = gr_Table.
    Please Advise
    Edited by: Sap Sap on Jul 27, 2009 12:18 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM

    Hi,
    The problem seems to be in your ALV grid display.
    The reason must be your field catalog.
    Just check your fieldcatalog.
    The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
    Probably you must have mistyped some field.
    Kinldy check.
    Regards,
    Ankur Parab

  • How to code a parallel 'for loop' and 'while loop' where the while loop cannot terminate until the for loop has finished?? (queues also present)

    I've attached a sample VI that I just cannot figure out how to get working the way that I want.  I've labeled the some sections with black-on-yellow text boxes for clarity during the description that follows in the next few sentences.  Here's what I want:
    1) overall -- i'm intend for this to be a subVI that will do data acquisition and write the data to a file.  I want it to use a producer/consumer approach.  The producer construct is the 'parallel for loop' that runs an exact number of times depending on user input (which will come from the mainVI that is not included).  For now I've wired a 1-D array w/ 2 elements as a test case.  During the producer loop, the data is acquired and put into a queue to be delt with in the consumer loop (for now, i just add a random number to the queue).
    2) the consumer construct is the 'parallel while loop'.  It will dequeue elements and write them to a file.  I want this to keep running continuously and parallel until two conditions are met.
          i. the for loop has finished execution
          ii. the queue is empty.
       when the conditions are met, the while loop will exit, close the queue, and the subVI will finish. (and return stuff to mainVI that i can deal with on my own)
    Here's the problems.
    1)  in the "parallel for loop" I have a flat sequence structure.. I haven't had time to incorporate some data dependency into these two sequential sections, but basically, I just care that the "inner while loop" condition is met before the data is collected and queued.  I think I can do this on my own, but if you have suggestions, I'm interested.
    2)  I can easily get the outer for and while loops to run sequentially, but I want them to run in parallel.  My reasoning for this is that that I anticipate the two tasks taking very different amounts of time. .. basically, I want the while loop to just keep polling the queue to get everything out of it (or I suppose I could somehow use notifiers - suggestions welcome)...  the thing is, this loop will probably run faster than the for loop, so just checking to see that the queue is empty will not work... I need to meet the additional condition that nothing else will be placed in the queue - and this condition is met when the for loop is complete. basically, I just can't figure out how to do this.
    3) for now, I've placed a simple stop button in the 'parallel while loop', but I must be missing something fundamental here, because the stop button is totally unresponsive.  i.e. - when I press it, it stays depressed, and nothing happens.
    suggestions are totally welcome!
    thanks,
    -Z
    Attachments:
    daq01v1.vi ‏59 KB

    I'd actually like to add a little more, since I thought about it a bit and I'm still not quite certain I understand the sequence of events...
    altenbach wrote:
    zskillz wrote:
    So i read a bit more about the 'dequeue element' function, and as I understand it, since there is no timeout wired to the dequeue element function, it will wait forever, thus the race condition I suggested above can never happen!
    Yes, you got it!
    As I've thought about it a bit more, there's a few things that surprise me... first, the reason the 'dequeue element while loop' errors is not because there's nothing in the queue, it's becaues the queue has been released and it's trying to access that released queue...   However the problem I have is this --- Even though there's no timeout wired to the dequeue element, I still would think that the while loop that contains it would continue to run at whatever pace it wanted -- and as i said before.. most of the time, it would find that there is nothing to dequeue, but once in a while, something is there.  however, it seems that this loop only runs when something has been enqueued.  the reason I say this is illustrated in the next code sample MODv2 that's attached below.  I've added a stop button to the "queue size while loop" so the program runs until that is pressed.  I've also added a simple conditional in the "dequeue while loop"  that generates a random number if it a button is pressed... but this button is totally non-responsive... which means to me that the "dequeue while loop" isn't actually continuously running, but only when an element is added to the queue.  this still seems almost like the 'dequeue while loop" waits for a notifier from the queue telling it to run.  can you explain this to me? because it is different from what I expect to be happening.
    rasputin wrote:
    I tried to open your VIs but it doesn't work. LV
    is launched, the dialog box (new, open, configure...) opens and then...
    nothing. Not even an error message. I guess it isn't a problem of LV
    version or a dialog box would appear saying this. Could you, please,
    send a image of the code?
    Thanks,
    Hi Rasputin, I'm using LV8.  I assume that was your problem, but who knows.  I've attached a pic of of altenbach's solution since it's what I needed.
    thanks
    -Z
    Message Edited by zskillz on 10-20-2006 11:49 AM
    Attachments:
    daq01v1MODv2.vi ‏63 KB
    daq01v1MODpic.JPG ‏116 KB

  • Settlement rule for AUC not automatically generated

    Hi Experts,
    I am working on a capital project scenario where I have configured the investment profile and assigned this to the project profile.  I have also configured the settlement profile and allocation structure for settlement to FXA.
    On release of the WBS element the AUC is automatically created.
    I have posted costs to the WBS element.
    When I run settlement in test mode, using CJ88 the details show the sender as the WBS element and the reciever as the AUC, and the amount = the cost posted to the WBS element in the posting period, (as expected)
    However, (now my problem)
    When I run settlement in "update" mode the settlement shows 1 settlement however when I drill down to see the sender or reciever details are blank.  There are alno no accouting documents and a settlement rule does not display for the WBS element.  There are no error messages even though the settlement has not taken effect.
    Please can anyone advise on the possible cause of this error.  One further  point the document type on the settlement profile is configured as "SA"  GL Account Document.
    Thanks in advance.
    Ian

    hi,
    Go to Settlement rule (CJ02),where enter the WBS .here go to Extra in the menu bar of that WBS ,under Asset under construction ckeck the box of Historiy....something like that .
    Regards
    Ricky

  • Microsoft Word Has Not Been Installed for the Current User

    Hi, everybody
    I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
    Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
    Routes tried and failed...
    1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
    2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
    At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
    Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
    -Kent S.
    Be strong as a ship and wise as a whale

    These questions are really best in the Microsoft Office Forums.
    These are MS Office Questions not ZEN Questions.
    Novell did not design Microsoft's Office Install.
    I have nothing against snapshots, but it does not work great with the Office
    installs, which you yourself know since you are posting here with problems
    based on that.
    And your other method you are trying with the break out is not working well.
    We also know that from experience.
    We can tell you that the way most people install it and the way most people
    succeed doing it, is by doing it the way recommended and designed by
    Microsoft.
    ZEN does that just fine.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "KentFSmith" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Thank you, Grimlock (-Grimlock?-)
    >
    > Through a google search I encountered a very close suggestion, and the
    > poster said they couldn't remember the name of a MS utility but that
    > there was one that would break out the individual MSIs from the Office
    > 2007 setup.exe bundle. The dependent app appears to be a simple and
    > possibly elegant solution, but without a good way to break out the MSIs
    > I don't see how to do anything other than with a config.xml ('Config.xml
    > file in the 2007 Office system'
    > (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
    >
    > Do you know of that utility and where I can find it?
    >
    > There is a lot of history here now of just doing the individual
    > applications. Everyone gets Word and Excel, but much fewer get
    > PowerPoint and Access. All other reasons aside, a compelling one is the
    > reduced number of help calls to the Help Desk here. Occasionally we
    > also just run the whole Office install for someone who needs some of the
    > odd utilities, but that is easily cost-justifiable for us to break them
    > out as exceptions. Otherwise, we focus 90% of our support on just Word
    > and Excel and it pays off nicely.
    >
    > If we switch to putting full Office 2007 on all PCs then there may be a
    > better approach that include other tools than ZfD, such as the fact that
    > we replace 1/3 of all PCs in the organization each year (so that no
    > hardware is more than 3 years "behind"). We could put 1/3 of all Office
    > 2007 installs into the new PC image. But we still need to support all
    > the use of the apps after the install, so ZfD MUST work well, it simply
    > MUST work well or we're screwed, to use the vernacular. Also, just
    > switching from what we've been doing for years -- single app orientation
    > -- means introducing new-ish issues that have to discover and explain to
    > our comrades, and to adjust our orientation with unknown future costs.
    >
    > But that may end up being the simplest adequate solution. And that's
    > what I want.
    >
    > -K
    >
    > grimlock;1883526 Wrote:
    >> Craig Wilson wrote:
    >> > You should really focus on #1.
    >> > Snapshot is not the way to go.
    >> >
    >> > Details about what is Not working or what random behavior may help
    >> folks.
    >> > Ask in the MS forums may help too. dont' mention zenworks.
    >> > Just say you are installing as Administrator from a share and getting
    >> these
    >> > errors.
    >> >
    >> > While not 100% accurate, it should be good enough to get some good
    >> feedback.
    >> >
    >>
    >> Nor is installing 1 app at a time. Install the whole suite, have an
    >> icon for each app that runs the exe for that app with a dependency on
    >> the another app that points to the installer msi.
    >>
    >> If any user runs any app, it will run if the executable is there
    >> (meaning it's been installed). If the executable is not there then it
    >> calls the dependent application (the installer app) and installs it,
    >> and
    >> then runs it.
    >
    >
    > --
    > KentFSmith
    > ------------------------------------------------------------------------
    > KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
    > View this thread: http://forums.novell.com/showthread.php?t=391573
    >
    >

  • Adding a counter that keeps track of the total number of times a loop has run, even if LabVIEW has been restarted.

    Hi all,
    I am writing a VI for measuring data and inserting it into a database. The measurements are controlled by a loop that runs once every minute. I want to give each measurement a unique id number and store this too in the database.
    To do this, I want to add a counter to this loop so that I can count the number of times the loop has executed in total. This is, even if the VI, LabVIEW or even th PC is restarted, I want the counter to keep track of the number of executions. If say, the loope executes two times and then the VI is stopped and restarted, I want the following number on the counter to be three.
    Does anyone have an idea about how to do this? I am gratefule for any help!
    Clara
    Message Edited by Clara G on 05-11-2010 08:21 AM
    Solved!
    Go to Solution.

    Not allowed to give away code but I can describe one of my "Totalizers" used to keep track of how much stuff has passed through a fliter so we know when to change it.
    THe Total izer is implemented as an Action Engine.
    It has three actions (methods)
    1) Init - Opens an ini file and reads the last values read and cahces these in shift registers. It also inits a timer so we now how long since the last file I/O.
    2) Update - Uses the data passed by the caller to update the totals. It also checks how long since the last save and if more than one minute it writes to the ini file (forced write).
    3) Read - returns the totals for display and evealuating if a an alarm should be triggered to change the filter.
    Note:
    THe pre-LV 8.6 version of the ini file exposed methods to allow writing to the file. The new ini functions do not expose that functionality and require closing the file.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

    Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
    terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
    different LabVIEW versions.
    Best regards,
    Gabsi

    Hi,
    When a for-loop runs zero times, all outputs are 'undefined' (and should
    be).
    Besides, how would LV know what the output of a not executed routine should
    be?
    It might be handled differently in LV5 and LV6, which is unfortunate. In
    both cases, the result is undefined.
    It's not a bug. It's just something that should be avoided in any LV
    version.
    > The solution is easy - I just have to connect the
    > output of the outer loop to the data line BEFORE it enters the inner
    > loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
    In some cases this does the trick. But if the data is changed in the inner
    loop, this will effect the results if the N is not zero.
    Technically, I think the output in this construction is also 'undefined'.
    But LV handles this as expected / desired.
    Another solution is to use a shift register. If N is zero, the input is
    directly passed through to the output.
    Regards,
    Wiebe.
    "Gabs" wrote in message
    news:[email protected]...
    > LabVIEW 6.1 If For Loop count terminal is zero then value going
    > through the loop is not passed on to the output of the loop
    >
    > Hello, one of our customers just encountered an execution error in a
    > vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
    > 6.01. I have a simple vi that has two encapsulated For Loops. Two
    > string arrays go in, one goes out of the outer loop. Inside the outer
    > loop the first array is indexed. The string which results from this
    > indexing is compared with all other strings from the second string
    > array in the inner loop. If it matches one of the strings of the
    > second array, it is not outputted, otherwise this string goes through
    > the inner For Loop to the output of the inner loop and from there to
    > the output of the outer loop. The count terminal of the outer/inner
    > loop is connected to the Array Size of the first/second string array.
    > If the second array is empty, that means that the element in test from
    > the first arry cannot match anything from the second array, so the
    > element in test is send to the output of the inner loop and from there
    > to the output of the outer loop. This works fine in LabVIEW 5.1 and
    > 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
    > executed if the count value is zero (which is correct), but the data
    > line running through the loop is not executed either, which is
    > different to what LabVIEW 5.1 and 6.01 do. There, the input string is
    > sent to the output of the inner loop correctly even if the loop
    > counter is zero. The solution is easy - I just have to connect the
    > output of the outer loop to the data line BEFORE it enters the inner
    > loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
    > supposed to be a feature, but it brings some incompatibility in
    > programming between the different LabVIEW versions.
    > Best regards,
    > Gabsi

  • Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.

    I get the following message whenstarting Safari
    Safari 7.0 (v9537.71) has not been tested with the plugin LastPass 1.75.0 (v1.75.0). As a precaution, it has not been loaded. Please contact the plugin developer for further information.
    i have removed the plugin, but the message is still around
    and the last version i had installed was the most recent version of last pass VERSION 3.0.17
    anything i can do to fix that?
    thanx
    js

    Uninstall SIMBL as follows. Back up all data before making any changes.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    /Library
    In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
    Application Support/SIMBL
    InputManagers/SIMBL
    LaunchAgents/net.culater.SIMBL.Agent.plist
    ScriptingAdditions/SIMBL.osax
    Log out and log back in.
    Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

Maybe you are looking for

  • My apple id account had wiped my wifes iphone when trying to back hers up, can i get her back?

    i have backed my iphone up to the computer and when trying to back my wifes up, it then deleted her account and all her contacts and changed her phone to be identical to mine and is now registering as my apple id account rather than hers, is there an

  • Dreamweaver and Fireworks not working correctly

    I am taking a DW8 class. I have MANY photos I want to use fireworks for. Installed free 30 trial of DW8 and Fireworks from my books CD. Did what DW8 said in creating web photo. Used Fireworks BUT when I clicked on the photo to enlarge I got the black

  • WBS element settlement to an AUC

    Hi Everyone, WBS element is settled to an AUC asset on periodic basis and on completion of the project the AUC is settled to a regular asset; in this process once the project is complete its status is set to technically complete before settling the A

  • Installing a flash player to play music on all pages of my website

    I have a website (www.rogeraltemus.com) displaying portraits of dogs & cats. I would like to add a flash player to the site to play an mp3 file of royalty free music. I want the music to begin when the first photo opens in some ones browser and conti

  • PLEASE HELP ME NO SERVICE 6 WEEKS

    Please help me I have talked to too many people to remember. I am waiting for a organ transplant. I must have a phone. I have had 2 techs and a splicer out here. The problem is outside and started when they were putting in a fios cable. Then they cam