Run allocation error
Dear expert,
I have run Allocation successfully but nothing saved in database. source script like this:
*XDIM_MEMBERSET TIME=2013.01,2014.01
*XDIM_MEMBERSET ACCOUNT = BS122
*XDIM_MEMBERSET CATEGORY=Plan,Actual
*XDIM_MEMBERSET ENTITY =$SOURCE$,$TARGET$
*WHEN ENTITY
*IS "Africa"
*REC(EXPRESSION=$ASARENT$,TIME=2014.01,CATEGORY=Plan)
*ENDWHEN
*COMMIT
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=BS122; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM ENTITY WHAT=$SOURCE$; WHERE=BAS($TARGET$); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=>>>; WHERE=2014.01; USING=2013.01; TOTAL=<<<
*DIM CATEGORY WHAT=>>>; WHERE=Plan; USING=Actual; TOTAL=<<<
*ENDALLOCATION
*WHEN ENTITY
*IS "Africa"
*REC(EXPRESSION=0,TIME=2014.01,CATEGORY=Plan)
*ENDWHEN
*COMMIT
Please show what I am wrong and how to correct it.
thanks so much
HUNGTH
I have edited my script base on your comment like this:
*XDIM_MEMBERSET TIME=2014.01
*XDIM_MEMBERSET ACCOUNT=BS122
*XDIM_MEMBERSET CATEGORY=Plan
*XDIM_MEMBERSET ENTITY =$SOURCE$
*WHEN_REF_DATA = MASTER_DATA
*WHEN ENTITY
*IS *
*REC(EXPRESSION=$ASARENT$)
*ENDWHEN
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=BS122; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM ENTITY WHAT=$SOURCE$; WHERE=BAS($TARGET$); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=>>>; WHERE=2014.01; USING=2013.01; TOTAL=<<<
*DIM CATEGORY WHAT=>>>; WHERE=Plan; USING=Actual; TOTAL=<<<
*ENDALLOCATION
*WHEN ENTITY
*IS "ASA"
*REC(EXPRESSION=0,TIME=2014.01,CATEGORY=Plan)
*ENDWHEN
But the same result
Similar Messages
-
Run-time error "PXA_NO_SHARED_MEMORY" occurred
Hi All,
My production system is running fine. And when i check SM21 I saw a lot of error message Run-time error "PXA_NO_SHARED_MEMORY" occurred and Run-time error "SYSTEM_NO_ROLL" occurred. However I can't see any error in ST22. I had read sap note 307976. And dont know when I restart the SAP services is it will be fine?
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Feb 22 08:13:29 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.58)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 58
M intno 20020600
M make: multithreaded, ASCII
M pid 2440
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2440) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 11592 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 047D0040, size: 2510384)
M DpShMCreate: allocated sys_adm at 047D0040
M DpShMCreate: allocated wp_adm at 047D17A8
M DpShMCreate: allocated tm_adm_list at 047D44F0
M DpShMCreate: allocated tm_adm at 047D4518
M DpShMCreate: allocated wp_ca_adm at 049F2460
M DpShMCreate: allocated appc_ca_adm at 049F6AB0
M DpShMCreate: allocated comm_adm_list at 049F8220
M DpShMCreate: allocated comm_adm at 049F8238
M DpShMCreate: allocated vmc_adm_list at 04A27038
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 04A27060
M DpShMCreate: allocated wall_adm at 04A27068
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Feb 22 08:13:30 2010
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 58
C patchcomment MSSQL: Workaround for SQL2005 change in RpcNexecInsert (814383)
C np:(local) connection used on PKG-PRD
C CopyLocalParameters: dbuser is 'prd'
C
C Mon Feb 22 08:13:31 2010
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.50.1022
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Mon Feb 22 08:13:42 2010
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache PKG-PRD_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [PKG-PRD] server_used : [np:(local)], dbname: PRD, dbuser: prd
C pn_id:PKG-PRD_PRDPRD_PRD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100222 081330 PKG-PRD
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Mon Feb 22 08:14:02 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 09E50040, size: 4400128)
M SHM_ROLL_AREA (addr: 12510040, size: 262144000)
M SHM_PAGING_AREA (addr: 617B0040, size: 113246208)
M SHM_ROLL_ADM (addr: 0A290040, size: 2616690)
M SHM_PAGING_ADM (addr: 0A510040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0A5A0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0A5F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14
B dbtbxbuf: Buffer TABL (addr: 103500C8, size: 30000128, end: 11FEC4C8)
B dbtbxbuf: Buffer TABLP (addr: 0E5200C8, size: 10240000, end: 0EEE40C8)
B dbexpbuf: Buffer EIBUF (addr: 0EF000D0, size: 4194304, end: 0F3000D0)
B dbexpbuf: Buffer ESM (addr: 0F3100D0, size: 4194304, end: 0F7100D0)
B dbexpbuf: Buffer CUA (addr: 0F7200D0, size: 3072000, end: 0FA0E0D0)
B dbexpbuf: Buffer OTR (addr: 0FA100D0, size: 4194304, end: 0FE100D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 120D8040
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 121F0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 121F03E0
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 107 MB, reducing # of fragments
A System page size: 4kb, admin_size: 13396kb.
A Attached to PXA (address 21F30040, size 440000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
C The IRow interface is supported by this OLEDB provider
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
A
A Mon Feb 22 08:14:03 2010
A ABAP ShmAdm attached (addr=53EC5000 leng=20955136 end=552C1000)
A >> Shm MMADM area (addr=5422D180 leng=134720 end=5424DFC0)
A >> Shm MMDAT area (addr=5424F000 leng=17244160 end=552C1000)
A RFC Destination> destination pkg-prd_PRD_00 host pkg-prd system PRD systnr 0 (pkg-prd_PRD_00)
A RFC Options> H=pkg-prd,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 49
M ThrCreateShObjects allocated 14604 bytes at 0FFD0040
N
N Mon Feb 22 08:14:05 2010
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\PRD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E
E Mon Feb 22 08:14:39 2010
E Replication is disabled
C
C Mon Feb 22 08:15:00 2010
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC CACHEPROFILE.
C Procname: [No proc]
C
C Mon Feb 22 08:15:01 2010
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 08:16:27 2010
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
S
S Mon Feb 22 08:19:23 2010
S found spool memory service RSPO-ACTIONS at 121F4C68
A
A Mon Feb 22 08:19:55 2010
A TH VERBOSE LEVEL FULL
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12304]
C Rollback Work (0)
A
A Mon Feb 22 08:19:59 2010
A Mon Feb 22 08:19:59 2010
A
A ABAP/4 Program /SDF/SAPLRI_SQLSERVER .
A Source /SDF/LRI_SQLSERVERU02 Line 264.
A Error Code CALL_FUNCTION_CONFLICT_LENG.
A Module $Id: //bas/640_REL/src/krn/runt/abfunc.c#14 $ SAP.
A Function FuncParams Line 2906.
C Rollback Work (0)
C
C Mon Feb 22 08:20:00 2010
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC loginfo.
C Procname: [No proc]
C
C Mon Feb 22 08:20:01 2010
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 08:20:07 2010
C sloledb.cpp [ParamStmtExec,line 12251]: Error/Message: (err 50000, sev 0), Table not found.
C Procname: [##Y3PKG_PRDprd00000024400000003365081342]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 99. stmt: [sap_get_table_size_info 'syscomments', 'prd', 'PRD'
C /* R3:CL_SQL_RESULT_SET=============CP:234 T: */
C ]
C Conn_i:2 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 222194
C dbdsmss: DBSL99 SQL50000
C Table not found.
B ***LOG BY2=> sql error 50000 performing FET [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY0=> Table not found. [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY1=> sql error 50000 [dbacds#2 @ 1187] [dbacds 1187 ]
B
B Mon Feb 22 08:26:10 2010
B dbmyclu : info : my major identification is 3232261128, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 31B87DDDE43B904B955F2E6B45F604BE.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
N login/password_change_for_SSO : 1 -> 1
B
B Mon Feb 22 08:32:54 2010
B table logging switched off for all clients
M
M Mon Feb 22 08:45:50 2010
M PfHIndInitialize: memory=<60720150>, header=<60720150>, records=<60720180>
S
S Mon Feb 22 08:55:52 2010
S handle memory type is RSTSPROMMM
M
M Mon Feb 22 09:18:08 2010
M *** ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c 423]
M *** ERROR => MsIAttachEx: NiBufConnect to /H/192.168.100.7/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001/sapmsOSS failed (rc=NIEROUT_SNC_FAILURE) [msxxi.c 633]
M *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_SNC_FAILURE) [lgxx.c 2984]
M *** ERROR => LgIGroup: LgIAttach(rc=-101) [lgxx.c 3504]
A TH VERBOSE LEVEL FULL
M
M Mon Feb 22 09:18:28 2010
M *** ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c 423]
M *** ERROR => MsIAttachEx: NiBufConnect to /H/192.168.100.7/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001/sapmsOSS failed (rc=NIEROUT_SNC_FAILURE) [msxxi.c 633]
M *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_SNC_FAILURE) [lgxx.c 2984]
M *** ERROR => LgIGroup: LgIAttach(rc=-101) [lgxx.c 3504]
A TH VERBOSE LEVEL FULL
C
C Mon Feb 22 10:01:09 2010
C Rollback Work (0)
A
A Mon Feb 22 10:18:24 2010
A TH VERBOSE LEVEL FULL
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12304]
C Rollback Work (0)
A
A Mon Feb 22 10:18:26 2010
A Mon Feb 22 10:18:26 2010
A
A ABAP/4 Program /SDF/SAPLRI_SQLSERVER .
A Source /SDF/LRI_SQLSERVERU02 Line 264.
A Error Code CALL_FUNCTION_CONFLICT_LENG.
A Module $Id: //bas/640_REL/src/krn/runt/abfunc.c#14 $ SAP.
A Function FuncParams Line 2906.
C Rollback Work (0)
C sloledb.cpp [DoDbcc,line 2930]: Error/Message: (err 2571, sev 0), User 'prd' does not have permission to run DBCC loginfo.
C Procname: [No proc]
C statement rerun with user dbo was successful, you can ignore the preceeding message
C
C Mon Feb 22 10:18:29 2010
C sloledb.cpp [ParamStmtExec,line 12251]: Error/Message: (err 50000, sev 0), Table not found.
C Procname: [##Y3PKG_PRDprd00000024400000012657081342]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 99. stmt: [sap_get_table_size_info 'syscomments', 'prd', 'PRD'
C /* R3:CL_SQL_RESULT_SET=============CP:234 T: */
C ]
C Conn_i:2 selection:1 singleton:0 flag_fupd:0 use_cursor:0 chksum: 222194
C dbdsmss: DBSL99 SQL50000
C Table not found.
B ***LOG BY2=> sql error 50000 performing FET [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY0=> Table not found. [dbds#3 @ 592] [dbds 0592 ]
B ***LOG BY1=> sql error 50000 [dbacds#2 @ 1187] [dbacds 1187 ]
Could anybody advice me on this
Regards,
ZulHi,
I hope 440000 will not the cause,
this might occur due to many reasons,
1. make sure you have all the components(Applications,OSlevel,DBlevel) are at same level in entire the landscape.
2. you can observe the evenlogs at OSlevel to get the error information pointing to. Also check for the dumps/logs(work direcotry).
3. if not, can open SAP message.
regards
Nagaraju -
Run time Error while executing project infosystem reports (CN41/41N)
Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh PradhanHi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
Martina Modolell -
Dear All,
I am new in BPC world so i want ur help in solving one error
when running allocation logic, it is not accepting more than 1 member in the denominator
the factor i am using is 1/using
can u pls help on this
thanks.Can you please post the logic and the error you are getting?
Thanks,
John -
"Memory Allocation Error" when Building a DVD
Hi all!
I have a problem. When I start to build a DVD. Encore stops with a "memory allocation error". The project I tried to build is 3.06 GB, so it's must fit to a simple DVD. My HDD has enought free space.
I tried to build it on two totally different computers but the error is the same. I didn't find any answer for this error. Can anybody help me?
I use Encore CS4, and the project is made in Premiere Pro CS3.
The computer #1:
Windows Vista (but I tried also with XP)
1 GB RAM
250 GB HDD
The computer #2:
Windows Vista
2 GB RAM
160 GB HDDI get the same! I was having an issue with video files from my digital camera, so I opened up Premiere CS3, which took them in and encoded them to MPEG-2 just fine (tisk-tisk! Premiere and Encore CS4 both failed to play them or encode them properly!!!)
Them I put these MP2 files into a project which has 2 menus, 4 video timelines, 2 slideshows with 200+ images and some background audio files (one linked to a menu, another plays in sequence after first finishes). The project is for PAL screen, and it is 4-some Gb, but less than a disk. I have 4Gb of RAM and 6Gb of page file, 70Gb free on my HDD. Running Vista Ultimate x64.
Slideshows render, and videos do not require transcoding, so the project is ready to build, it starts writing the ISO file, and crashes after 1.8-1.9Gb is written.
There seems to be no easy way to re-create my slideshow, or I would have just re-built the entire Encore file to see if that would work.
My PC is overclocked, I admit, I have not tried it without an overclock, but my system has been uber-stable for 12+ months! I will try and report if it fixes anything, but I doubt it. I have also tried to run this build after a fresh reboot with mostly everything turned off, to prevent system conflicts. If that's what it is, I must have missed something. But Encore CS4 is BUGGY LIKE GOD KNOWS WHAT!!!!! This is one crash I can't get around, but it's not the only one I've had. If anyone knows an answer, PLEASE post it here! Adobe guys please please please please! My project's already held up for a month! -
Memory Allocation Error during Boot
Hi,
I am posting this on a different computer than the one on which I istalled Java because I can no longer get it to boot.
Here's the history:
I am working in Windows 98
I added a line to the autoexec.bat so that the PATH lines looked like this:
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=%PATH%;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
I then rebooted and tried the javac and java commands in different folders and everything worked fine. I shut down the computer and tried to reboot a day later. The following are pieces of the message I received (I don't usually go near the autoexec.bat or system settings so I have no idea how to get past these errors, nor fix them):
SET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1;"C:Program Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at 0090:1921
Memory Allocation Error
Cannot load COMMAND, system halted
Please help!
Thanks,
JulieSET PATH=C:PROGRA~1\UTILIT~1\SYMATEC\PCANYW~1
PATH=C:WINDOWS;C:WINDOWS\COMMAND;C:PROGRA~1\UTILIT~1\SY
ATEC\PCANYW~1;"C:Program
Files\Mts";"C:j2sdk1.4.0_02\bin
General Protection Fault in C:WINDOWS\SCANDISK.ALT at
0090:1921This shouldn't have been caused by the Java installation. As I understand the situation, at load time scandisk has been called. This is usually due to the computer not having been shut down properly, or a sign of real problems. However, scandisk is unable to run.
You should try a forum/newsgroup for Windows for more help. My own suggestion would be to load to the command prompt (or try safe mode). (Press F8 during boot to get a menu.) And then run scandisk manually. If it works, try renaming the C:\WINDOWS\SCANDISK.ALT file and rebooting.
Regards,
Bhaveet -
Checkdb found 6 allocation errors , how to fix ?
HI Experts,
checkdb found 6 allocation errors, how to fix ?
Thanks in Advance!
VijayCauses
file system corruption,
underlying hardware system issues,
driver issues,
corrupted pages in memory,
problems with the SQL Server Engine.
Possible solutions
1.best solution if CHECKDB reports consistency errors is to restore from a known good backup.
2. If you cannot restore from a backup, then CHECKDB provides a feature to repair errors.
3. If system level problems such as the file system or hardware may be causing these problems, it is recommended you correct these first before restoring or running repair. 4. Allocation error in Index page, please recreate the index.
Thanks - Vanchan.Please MARK AS ANSWER, if my answer is useful to U. -
What is root cause of Error in InitVXI library. Allocation error in initialization?
The error result after executing ResMan; Error: Error in InitVXI library. Allocation error in initialization.
Hope you can help, thanks....Hi ctapa,
If by chance you receive this error when attempting to run ResMan outside of Measurement & Automation Explorer (MAX), then you will want to refer to this KnowledgeBase article, which details how to fix such an error/crash.
Curious--what operating system do you run for your VXI system? Also, what version of NI-VXI do you have installed? (You can check this in MAX, beneath the Software tree) In addition to the "Error in InitVXI Library..." message you receive, do you see your system
exhibiting any of the problematic symptoms mentioned here? Replying with any additional information on your system and setup would be most welcome and aid in finding the cause of the issue.
Kind regards, and happy holidays!
Warm regards,
pBerg -
Memory allocation error when burning in premiere elements 2
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erikamemory allocation error when burning in premiere elements 2
Erika Lindsay - 09:30am Jan 4, 2009 Pacific
I have premiere elements 2. I happily burnt a version of my dvd then suddenly it stopped burning and I had the above message during the burning section of the process. My computer has adequate memory to run this programme and nothing new has been added. I then downloaded Premiere elements 7 as a trial and burnt this Dvd yesterday. However today it won't burn through 7 either so i am reluctant to upgrade unnecessarily. Can anyone shed light on why I receive this error message.
Other things seem to burn but I am beginning to receive messages that Adobe is low generally on memory allocation.
Regards
Erika -
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error on MB5B
Hi expert,
Time_out & TSV_TNEW_PAGE_ALLOC_FAILED Run time error getting while executing Tx-MB5B.
ECC 6.0
oracle 10g
HPux
Regards,Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 08.02.2012 14:50:11
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
Error analysis
The internal table "\PROGRAM=RM07MLBD\DATA=G_T_COLOR" could not be further
extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 76
Number of rows: 3
Allocated rows: 3
Newly requested rows: 128 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 5720752
Extended memory (EM)........... 502807584
Assigned memory (HEAP)......... 1842267952
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"RM07MLBD" or "RM07MLBD"
"COLORIZE_TOTALS_FLAT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error. -
Hi All,
We are getting a run time error with the text "No more storage space available for extending an internal table."
tcode executedd is we02.
kindly let me know if anyone has come acrossed this kind of error.
pointers will be appreciatedHi Srikanth,
I have not come across this error. But lets see if we can solve this. Kindly let me know when you are getting this run time error.
It seems to be a memory allocation issue, with some IDOC processing.
Also, check the below given link, if it is of any help to you.
Link: [function module;.
Best Regards,
Ram.
Edited by: ram Kumar on Dec 3, 2008 3:14 PM -
Msg 2511, Level 16, State 2, Line 1
Table error: Object ID 41, index ID 1, partition ID 281474979397632, alloc unit ID 281474979397632 (type In-row data). Keys out of order on page (1:187), slots 9 and 10.
CHECKDB found 0 allocation errors and 1 consistency errors in table 'sys.syscolpars' (object ID 41).
CHECKDB found 0 allocation errors and 1 consistency errors in database 'db_name'.
repair_rebuild is the minimum repair level for the errors found by DBCC CHECKDB (adv_tvs).
Help required on the above error mentionedHi Rapunzel,
The minimum repair suggested is repair_rebuild you can try that. As per mssage there is corruption in your database and it can only be corrected by either repairing or Restoring from known good backup.For doing repair the database must be in single-user
mode.
Please read
dbcc checkdb repair_rebuild option
Since DBCC CHECKDB with any of the REPAIR options are completely logged and recoverable, Microsoft always recommends a user use CHECKDB with any REPAIR options within a transaction (execute BEGIN TRANSACTION before running the command) so that the user can
confirm he/she wants to accept the results of the operation. Then the user can execute COMMIT TRANSACTION to commit all work done by the repair operation. If the user does not want to accept the results of the operation, he/she can execute a ROLLBACK TRANSACTION
to undo the effects of the repair operations.
REPAIR_REBUILD does not repair errors involving FILESTREAM data.
How big is database. If it is small and backup also is corruption free you should consider restoring from backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Resman error: VXI A24 address allocation error on bus 0
When we execute resman.exe on our test system the following error occurs:
VXI A24 address allocation error on bus 0
We have the MXI Controller configured the same as other systems and our configuration is a pc and two VXI chassis. Anyone have any ideas on what could cause this error?Hi Jim,
I do not immediately know the solution to the problem you are seeing, but have a few troubleshooting suggestions:
1. Check the pins on all of your MXI-2 connectors. If the cable
has damaged pins which cannot be bent back to place, you will want to
replace the cable.
2. Try a single VXI chassis, and then the other. If the problem
occurs with each chassis individually, then it is likely an issue with
the PC or cabling.
3. If the problem only occurs with one of the chassis in step 2, remove
all instruments from the chassis and try running resman again. If
this solves the problem, add your instruments back one at a time to
isolate which instrument could be causing problems.
4. If the problem occurs with both chassis in step 2, do you have another PCI-MXI-2 that you could try?
Let us know the results of your troubleshooting, and we'll be happy to help you out further.
Jason S.
Applications Engineer
National Instruments -
Run-time error handling without popup
I'm searching for a way to make a CVI executable more robust by performing an automatic routine if any run-time error occurs. Basically I don't like the fact that a popup is displayed and the program is halted in the event of a fatal run-time error. I cannot prevent a fatal run-time error from ever occurring so I was hoping there was a way to handle it automattically when CVI detects it. So far though, the only thing that I've found is the CVI run-time error popup which suspends the program until user input or in release mode, a Windows popup that suspends the program in a similar manner with more cryptic OS level exception info. I'm using Windows XP and CVI 2009, thanks.
Ok, well, the source of the fatal run-time error seems to be within a function call to imaqSnap within the NI Vision library. imaqSnap() is a function that just grabs 1 frame of video. We're using NI Vision 8.5 with a PCI-1422 Imaq card and whenever there is no signal present at the input of the card, we get the following error:
FATAL RUN-TIME ERROR: "Imaq_support.c", line 187, col 18, thread id 0x000004F8: Function : (errorCode = -1074397150 [0xbff60022]). A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period.
Line 187 is the line with the call to imaqSnap shown below:
/* Initialize the Image Capture system */
/* Open an interface and a session */
ApplErrChk(imgInterfaceOpen ("img0", &Iid));
ApplErrChk(imgSessionOpen (Iid, &Sid));
/* set aquire mode */
/* Snap a picture : ImaqBuffer is NULL, memory will be allocated by NI-IMAQ */
AcqImage = NULL;
AcqImage = imaqSnap (Sid, NULL, IMAQ_NO_RECT);
if (AcqImage == NULL) {
ErrNull = TRUE;
iErrCode = imaqGetLastError();
if (iErrCode != ERR_SUCCESS) goto tst_exit;
It seems to me that this should not be a fatal run-time error, it should instead throw a non-fatal timeout error and allow our calling code to handle the null reference to the image. Since it's a fatal error though, it doesn't allow me to ignore the run-time error and handle it gracefully. The Sid and Iid references look fine when it throws the error so I'm unable to detect the problem before the function call. Any thoughts on how to fix this issue? -
Run time error: mass deletion of locations in APO
Hi,
While deleting the locations /SAPAPO/DELETE_LOCATIONS (after setting the deletion flags in MASSD header: Location: deleiton flag) in background, i get the following run time error.
If someone has fixed this before please help.
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2890
Number of rows: 0
Allocated rows: 1492
Newly requested rows: 4 (in 372 blocks)
Termination occurred in the ABAP program "/SCMB/SAPLMDL_LOCATION" - in
"MAP_DATA_MULTI".
The main program was "/SAPAPO/DELETE_LOCATIONS ".
In the source code you have the termination point in line 435
of the (Include) program "/SCMB/LMDL_LOCATIONF06".
The program "/SCMB/SAPLMDL_LOCATION" was started as a background job.
Job Name....... "/SAPAPO/DELETE_LOCATIONS"
Job Initiator.. "LR249J"
Job Number..... 03254500
code extract
432 LOOP AT ls_data-adrs INTO ls_adr.
433 IF <fs_adrs> IS ASSIGNED.
434 MOVE-CORRESPONDING ls_adr TO <fs_adrs>.
>>>>> INSERT <fs_adrs> INTO TABLE <ft_adrs>.
436 ENDIF.
437 ENDLOOP.
438 ENDIF.
439
440 INSERT <ls_data_out> INTO TABLE et_data.
I did not find any notes with key words suggested in the log. I don't quite understand ABAP debugging
Regards,
LoknathHi Loknath
As DB49 mentioned, this is related to memory setting.
I guess if you look for the used memory area in the ABAP dump,
you may see how much memory was consumed.
If it already consumed around 2GB, you have better to execute
MASSD with more less data.
If it is not, You have better to ask your basis people to check
following parameters. (By extending these parameter, one user
can use much more memory space).
-Allowed memory space for one user session.
ztta/roll_extension
em/address_space_MB (Only when you use windows OS)
-Allowed memory space for system wise.
em/initial_size_MB
abap/heap_area_dia
abap/heap_area_nondia
abap/heap_area_total
abap/heaplimit
Best Regards
Keiji
Maybe you are looking for
-
Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?
I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle. It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.
-
Second iSight on my Mac Book Pro possible ?
Hi! I'd like to buy an old iSight external camera and connect it to my MacBook Pro. But The MacBook Pro already has an iSight camera. Will it work ? How will I select which camera will be used ? Many thanks for your help.
-
Does anyone have any information on when Adobe plans to release Captivate 4? Even a general time line would be great - like 2008 or 2009. I'm still on Captivate 2, but I want to upgrade. I'd hate to upgrade now to version 3 only to have version 4 rel
-
Suggestion: Use Disk Warrior/ Disk Utility before, after 10.5.6 update
FWIW: For years I have used a combination of Disk Warrior and then Disk Utility before and after updates, major installs, etc. Normally I boot right into Disk Warrior and let it do it's routine and after that check the disk and repair permissions usi
-
Locked file problem with WebDAV
I am using DreamWeaver CS3 on my Macintosh at home and on a PC at work. I am connecting to my website via WebDAV, and for some reason Dreamweaver cannot edit the files on the site. When I try to check out any file I get an error stating: "file.html i