Run applications Flex with USB Key

There is software that help me to use USB memory key to run adobe air applications. Do you known if exist sofware security???

I used this technique to "install" and run an AIr app from USB
http://dmartin.org/weblog/how-run-adobe-air-apps-windows-without-admin-rights

Similar Messages

Communicate a Web application (Flex) with a mobile Apllication (Flex)

Hello,
I wonder if it is possible to communicate a Web application (Flex) with a mobile Apllication (Flex).
when I Click on a button in my web application I receive an alert in my mobile application.
if you have any ideas I would be very grateful.
Regards.

I tried that but my problem is that the code is so old. At least what I saw. I don't know how old is too old and I'm trying to do things "right." I saw code from 1998, but I don't know if that's still what you do. It might still work, but that doesn't mean it's correct. There's so much out there on Java that so old that half the time I'm not sure what to do because some other technology in J2EE or the latest Java SDK might have come up with a new way to do things. Thanks.

WLS8.1sp4 running into Bean with primary key

We're facing an interesting issue with WLS8.1sp4.
We have upgraded from WLS6.1sp5 to WLS8.1sp4, while testing running into the following error.
javax.ejb.NoSuchObjectLocalException: [EJB:010140]Bean with primary key: '5375758' not found.: javax.ejb.NoSuchEntityException: [EJB:010140]Bean with primary key: '5375758' not found.
at weblogic.ejb20.manager.BaseEntityManager.checkForReentrant(BaseEntityManager.java:1460)
at weblogic.ejb20.manager.DBManager.preInvoke(DBManager.java:251)
at weblogic.ejb20.internal.BaseEJBLocalObject.preInvoke(BaseEJBLocalObject.java:228)
at weblogic.ejb20.internal.EntityEJBLocalObject.preInvoke(EntityEJBLocalObject.java:72)
at edu.harvard.gmas.budget.SegmentLineItemBean_uyzy57_ELOImpl.getSubagreement(SegmentLineItemBean_uyzy57_ELOImpl.java:138)
at edu.harvard.gmas.budget.SegmentCategoryManager.entityToSegmentLineItemData(SegmentCategoryManager.java:1610)
at edu.harvard.gmas.budget.SegmentCategoryManager.entityToSegmentCategoryData(SegmentCategoryManager.java:1494)
at edu.harvard.gmas.budget.SegmentCategoryManager.fetchSegmentCategoryData(SegmentCategoryManager.java:2833)
at edu.harvard.gmas.budget.CategoryBudgetManager.fetchCategoryBudgetDataForProposedBudget(CategoryBudgetManager.java:2882)
at edu.harvard.gmas.budget.BudgetMediatorBean.recalculateAndUpdateCategoryAmountsForProposedBudget(BudgetMediatorBean.java:6855)?:|?:|

The code is already there with JDBC call inserting
into the table, the inserting trigger then will generate
sequence key and being inserted into primary key column.
Now wondering if it's possible to change the code to use entity bean but without modifying the trigger (since it contains other business logics).

Auto run projector file from usb key

Hey guys
I was wondering if anyone has written an .inf file that will
automatically start a projector file when a usb key is inserted
into the usb port.
Thanks

i am not sure if you mean a .swf file or the .exe standalone
file.
either way this should work. just replace the 'yourfile.exe'
with your exe/swf file. Hope this helps.
[autorun]
open=yourfile.exe
icon=yourfile.exe

Problem with USB key installation

I use dd command to write the iso image to an USB key (8G). Then I use partition tool to increase the Linux partition to 7G from 34M.
But during the installation of xfce4, the OS reports no enough space left. How to solve this issue?
Also parman reports erros during the installation of archiso.
Thanks,

If you burn an iso to a usb with dd, that will not be a persistent system. You cannot actually change the size of if nor install anything new (at least nothing that would survive a reboot).
If you want to install a persistent system on a usb, there is a wiki page for that - and it is pretty simple. I've done it many times. But you need to follow the installation instructions, not the live-media creation instructions.
You'll mount and partition the usb, use pacstrap, configure files, and install a bootloader on the usb.
EDIT: if, however, you don't need a modifiable system, but rather you just want to create a customized live-usb, there are tools for this as well - I haven't used them and I get a couple names confused: archboot and archiso. At least one of those would be the tool for this.
Last edited by Trilby (2013-08-13 13:19:20)

Please help with USB Key

Im running logic pro 7. My usb key broke (bent) during a move. Do you know of a simple and inexpensive way for me to replace it or repair it. Is that an option, or do I have to repurchase Logic Pro 7 (from a consumer of course, given the fact that Apple no longer sells that version).

Contact Apple Service. If you are the registered owner, they will help you get a replacement. If you aren't the registered owner, it might be tougher, but they are not unreasonable.

Run application developed with Oracle dev tools in Linux client

Hi,
In my organization we're using Oracle forms and reports as development tools and 10g database.
We have developed an app that runs on Windows XP, and I would like to know what are the possibilities for it to run in a Linux client, such as Fedora, Ubuntu, etc.
Is it possible? What would I need to do that?
Thanks

For Forms and Reports to run in Linux it (Linux) will need a Java plug-in.
The last time I did this I used this:
The file jre-6u12-linux-i586-rpm.bin was download from:
http://www.java.com/en/download
There should be instructions there on how to install and configure.
I will include my short enable notes below: (Keep in mind these are about two years old)
Enable and Configure
1. Go to the plugins sub-directory under the Firefox installation directory
This directory was:
/usr/lib/firefox-3.0.1/plugins (On Red Hat AS 4)
2. Enter the following command to create a symbolic link to the Java Plug-in for the Mozilla browser.
ln -s /usr/java/jre1.6.0_12/plugin/i386/ns7/libjavaplugin_oji.so
Note: Use ns7-gcc29 if Firefox was compiled with gcc2.9. (It was not)

Cross Post:: Disk Utility Application - Errors with USB Drive

I have a 4200 2.5" 100GB Hard Drive in a "portable" configuration that I've used for some time. I had not plugged it into my MBP until today and it seemed to read the drive, but that's about it. I went to Disk Utility to do what I used to call in the PC world a "format" or "fdisk" to get all the stuff off of it and get it setup as a Backup drive for my MBP. Essentially, the drive is now kaput! Actually, what happens is, when I attempt any task in the Disk Utility app, it simply freezes up and no matter how long I wait (I've waited thirty minutes) nothing happens and I'm forced to "force end" to the app. Any ideas on this?
I am able to take the drive to my XP machine and reformat / repartion the drive, but it will not allow files to be copied over to it in the mac using the NTFS. This also seems odd to me. Any ideas on this one?
Thanks,
Bob

I posted a reply to that.
Explanation:
I posted originally in the other forum because it is a USB drive issue. I cross posted because it is an Application issue. I probably should have just posted in one or the other!
Thanks Jim,
Bob

Problem with an application running Adobe Flex. Tech people say they cannot monitor, track or catch the problem.

Problem with an application running Adobe Flex. tech people say they cannot monitor, track or catch the problem. Application shuts down and give the following erre:
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.

<moved from Downloading, Installing, Setting Up to Flex>

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

Unable to write text in Hindi Language in Flex running application

I am not able to write text in Hindi in flex running application.
I have installed Hindi font by window system CD and all I did for font installation.
But still I am not able to write in Hindi in the running flex application by using Flash Player with all version.
I am able to write text in Hindi in MS Word, even in the flex builder editor and all the place but not in the running application.
Is Flash Player doesn’t support Hindi Writing?
My running application support all other languages except Hindi.
Please help me. It’s very urgent.
Thanks In Advance

Hello GargMoniKa
even we are facing the same problem.
we have a requirement of writing HINDI text using English Keyboard.
you have mentioned above that you have implemented the other languages.
can you please share the code so that we can try for other languages.
i m really in need of it.
thnk u in advance...

Flex with jsf Application

Hi
I am new to flex and i have a knowledge on jsf .We got a requriment to integrate the flex with jsf .
I googled and i developed the sample application using the fiji (Exadel ) .
When i an running the application in the jboss I GOT EMPTY page then after deselecting the check box of 'blockjavascript' in the browser
am able to see the swf file in the page
can any one help me..
My Project
The   mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="1024" height="715" xmlns:ns1="*">
<mx:Form x="22" y="47" width="1200" height="680">
</mx:Form>
   <mx:Button x="22" y="5" label="This is Prapansolution" width="280"/>
</mx:Application>
The .jsp
       <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:fiji="http://exadel.com/fiji"
          xmlns:a4j="http://richfaces.org/a4j"
          xmlns:rich="http://richfaces.org/rich"
          xmlns:ui="http://java.sun.com/jsf/facelets"
           version="2.0">
         <f:view><h:form id="myForm">
          <fiji:swf src="/faces/FirstFlexApp.swf" id="demonew" bgcolor="#FFFFFF" width="820" height="480">
          <f:param name="text1" value="Hello" />
         </fiji:swf> </h:form></f:view>

"vikbar" <[email protected]> wrote in
message
news:gb0tug$7je$[email protected]..
> Hi Amy,
>
> Isnt the HistoryManager approach more specific to Flex
application i.e if
> user
> is just navigating with in the flex application? In my
case the user will
> navigate between a JSF page which does not have any SWF
file and the
> another
> one which has swf file embedded. Now everytime when the
suer moves to the
> flex
> embedded JSF page from the Non Flex JSF page these are
the steps which are
> always going to happen :
>
> 1.) System Manager will get initialized and will create
PreLoader
> instance.
> 2.) The preLoader will then try to download the swf
file. Now since this
> is
> the second time the user is coming back to the flex page
so the broswer
> would
> have already cached this swf, so Preloader will skip the
downloading
> swf/RSl
> step and hence you wont see any initialization progress
bar.
>
> 3.) New Application object will get instantiated and
will go through its
> whole
> lifecycle.
>
> So, I guess historyManager approach will work only if
the user stays on
> the
> flex application only and navigates with in flex
application itself(so in
> that
> case if the user clicks back then it knows which flex
component or view to
> display), but in my case user will completely move away
from flex page to
> a
> JSF page and then will try to come back.
>
You'd need to put the right stuff in the url to make it work,
just like if
you were calling a page that's expecting GET params. I don't
really use the
HistoryManager, so you'll need to either look into this
yourself or ask
someone who knows more about it.
HTH;
Amy

Noob Flex Questions - Run Application

Hi All
I am trying to learn Flex 4 and having a question.
When I download the sample files from Adobe website, I tried to open the files in Flex but it told me that I have to select
New -> Flex Proejct -> Assign the file folder location to create a new Flex project. Then I created one with my own project name.
Flex then created a new src folder with my new project name.mxml file. "THE FILE I WANT TO OPEN IS ON THEIR ORIGINAL FOLDER NAME." like
Flex src or whatever the author created. I tried to run their mxml file, but the "Run Application" is grey out??!!. Why? I have to moved the mxml to my src folder? It seems dumb to me that I have to do this to open an existing project. Besides, if there is a subfolder with another subfolder under Flex src folder, when I moved them to my src folder, it created subfoldername.anothersubfoldername under my src (instead of subfolder/anothersubfolder that the original author created). I know it might be a noob question, but what is going on here? I cant' even get the existing project running.........Thanks for any helps...

Hi,
Your question is a bit confusing but here is a fundimental principle in Eclipse.
Every project has;
MyProject
- bin
- src
- MyApplication.mxml
- html-template
- libs
The 'src' folder holds all runable/compilable code actionscript classes and mxml components/applications.
The only thing Flash Builder will run is a mxml file that subclasses s:Application or mx:Application or any subclass of them.
Flash Builder will not 'just' run an mxml file. So if you get application samples from Adobe, you need to have them in the src folder and there needs to be a little green arrow in the top left corner. This means it's a registered application that you can run. The little blue dot in the top right corner means it's the default application that will run when you hit ctr-F11 or F11 or Run..
If you paste a file that IS an Application and cannot get it to run, you need to;
- make sure it's in your src folder
- right click an select Run As
- select Web Application
This will run the app baring no compiler errors. If the mxml file is not registered as an application, this action will also register it.
Hope that helps,
Mike

Echo heard by others in VOIP application with USB Extigy HELP!

>Echo heard by others in VOIP application with USB Extigy HELP!x I have a soundblaster Extigy... the external USB model. It has been working fine for me but I just discovered a problem when I tried to use it during a Video/VOIP application.
I can get the other party up in the video session and I can hear them perfectly. They can hear me perfectly. The problem comes in when they speak.
When the other party talks they hear a huge eo on their end. I don't have an echo when I speak or listen.
We tried various things. When I disconnect my mic from my soundblaster and use the mic on my camera the other party does not have an echo when THEY speak any longer.
What is even more strange is that if I open Skype and engage in a skype conversation the person in the OTHER VOIP/VIDEO application can not only hear what is going on in that one, BUT when they speak the person in my skype conversation hears it! This is when the other party does not even have skype.
There is something definately going on with my soundblaster that is causing the other party to have an echo on THEIR end.
Any help would be greatly approeciated.
BTW... I'm running windows XP Pro.

A Thanks for the help, we'll try that. We are using a D-LinkDGL-400 Router with th D-LinkModel DGS-2208 switch. The program we are trying to run is OpenMeetings (an open source application) that we are hoping to get up and running so non-profit organizations have a free place to collaborate (http://www.caihq.org:5080/openmeetings/
What makes this strange is that when I use the Creative Orbit Camera I have with the built-in Mic not running through the Extigy there is no echo but the background noise is a bit of a hassle.
I'll try all you said and post the results.
Thanks again for the help.
Bob

Not enough memory on startup disk to run applications with more than 200Gb free!!

I have a MacBook Pro final 2011 with 8 GB RAM and 500 GB disk with Mountain Lion OS X 10.8.5 and I'm using only 56% of my disk (over 276.5 GB). Nevertheless after some time my MAC starts to became slower until it opens a window with the message 'not enough memory on startup disk to run applications' and asking me to choose an application to stop! How can it be that 'not enough memory on startup disk' (espaço insuficiente no disco de inicialização) if I have more than 200 Gb free? Is there anything that can be done to solve that?

1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
5. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
6. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html

Run applications Flex with USB Key

Similar Messages

Maybe you are looking for