Run default Logic to send data from the sheet

Hi,
I want to run Default logic by clicking a button, basically i want the data from input schedule to be send to DB and in between i want to massage the data through the script written in default logic and then write it to DB.
The challenge what i see is unless i change the record in the input shcedule the record is not being picked.
Basically if a user opens a schedule and if he is OK with the data he will click on a button, which will run a script to massage the data and write to the DB.
how to achieve this?
Regards

Hi Nilanjan,
Thank you.
Here is my requirement.
User A logs in and seeds the data with Status X. (X,Y are the values in a dimension)
User B logs in and verify the data feed and if he is Ok with the data he will click on a button which will run the script to change the status of the data from status X to status Y.
I have assigned a package (uses 'Default_Formulas' Process chain) to the button.
I want to run this button which triggers the package without any user prompts and run the script to manipulate the value.
how to achieve this?
Regards

Similar Messages

"...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve Callender

Tried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Error message: "iTunes could not sync contacts to the iPhone "name here" because an error occurred while sending data from the iPhone."

Began when Apple replaced my HD on my iMac. I can backup without any problems but when it is time to sync, I get this error.

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

How can I allow a sub-vi to run independent of the main program once it has been called while still sending data to the sub-vi

I have a main program where I call a sub-vi. In this sub-vi, there is a while loop that is used to wait for commands in the sub-vi. While the while loop is running, I cannot continue with normal operation of the main program. I would like get the sub-vi to run independently once it has been called, but not hold up the main program. As well, I need to still be able to send data to the sub-vi

One way is to use VI Server, which has been mentioned by others. This will allow you to start another VI (by name) and run it entirely independently of the calling VI. This is a good way to start various independent VIs from a main menu, for example. None of the VIs thus called need have any connection to the others.
Another way it to have the SubVI in a separate while loop on the calling VI's BD. Then, use a local var to start this sub VI from the main loop. The calling VI sets a local START bit and continues running. The sub VI's while loop watches for this START bit to go true, and then runs the Sub VI. The advantage here is that one can more easily pass arguments to the SubVI when it is started, using local vars, which are preferable to globals. Once the Su
bVI is running, however, you must use a global Stop Bit, set in the calling VI, to stop it when the calling VI exits, or the calling VI will hang up, waiting for the Sub VI to close and exit its while loop.
If you need an example of this, email me. ([email protected]). I can also recommend Gary W. Johnson's excellent book which discusses this. ("LabVIEW Graphical Programming", 2nd Ed).
Note: Where possible, I try to call a subvi from within the main VI, wait till it is done, then continue. It avoids the use of locals & globals, and results in cleaner code, with fewer "race" conditions. However, the main VI stops until the subVI is done, hence one should make the subVI modal.

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

How is the best way to send data from local database into remote database ?

Hi all,
I need to send data from local Oracle database into remote oracle database. Both sites connected via 128 kbps frame relay connection.
The sending need to be done once a week, can be done nightly.
How is the best way to do this ?
Thank you very much,
xtanto

How is the best way to do this ?How much are you planning to send?
You can use COPY command. Ensure that you have valid database link between two databases.
Available options are:
create - creates a new table. errors out if the destination table exists.
replace - drop the destination table and re-creates with data.
insert - inserts data if the destination table exists.
append– appends data into an existing table.
use set arraysize 5000 -The arraysize specifies the number of rows that SQL*Plus will retrieve from the database at one time.
copy from scott/tiger@ORCL to scott/tiger@ORCL92 create new_emp using select * from emp;

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format. Siebel wants to send the data as xml to BI but not sure of the BI capabilities on giving WSDL embedded with XSD (input is a hierarchical)

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Anyone know why since May 18th I get this when checking my POP3 mail from Mail? 'The server returned the error: The attempt to send data to the server "(null)" failed.' Looked at all the debates on here, nothing works. APPLE?!

<rant>I have seen many people complaining about this. I've seen lots of suggestions; change your POP3 SSL number, twist your knee backwards whilst standing on just your little finger. Nothing works. I'd like to not have to migrate to a new Mail software.
</rant>
I thank you.
<Edited by Host>

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Trouble running "Universal Windows app that consumes data from the Azure Marketplace" sample

I am trying to run the sample titled "Universal Windows app that consumes data from the Azure Marketplace". I am not sure how to enter the credentials for the Zillow APIs. I obtained a key from Zillow, but when I enter it per the instructions
in the sample, I still get an unauthorized (401) error.
The instructions say Insert that key into the SampleDataSource file of your project in place of the string "Your account key goes here".
So I replaced my key in this line of code:
request.Credentials = new NetworkCredential("<Your account key goes here>",
"<Your account key goes here>");
Am I missing something else?

Hi isgimaryann,
I would suggest you ask question at:
https://code.msdn.microsoft.com/windowsapps/Universal-app-that-d7406c5b/view/Discussions#content to see if the owner of the sample will give you some suggestions.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

Yes, by using a third-party utility such as Phone to PC or Phone to Mac.
Also see How to dowload purchased music and Downloading past purchases from the App Store, iBookstore, and iTunes Store

What are the idoc to send data from sap hr to sap fi

what are the idoc to send data from sap hr to sap fi

Message type of IDoc depends on the data you wish to send.
please detail on the data that you need to send in the IDocs.
regards,
Nitin

Run default Logic to send data from the sheet

Similar Messages

Maybe you are looking for