Run form in debug mode with windows vista

hi guys
plz help me
i'm using oracle forms 10g r2 on windows vista home primume and everything is ok but
when i need to run any form in debug mode i get the following
the jvm 1.4 give me jvm is aborting after that
the oc4j give me the following error frm-92101 there was a failure in the form server during start up
thanks

Hi Manoj,
You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
Let me know if you need more information.
Thanks,
Pawan

Similar Messages

  • Running Forms in Debug Mode (appletviewer / J-Initiater)

    Hi All,
    I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
    Thanks,
    Easo

    Attaching to a Form running outside the builder
    The advantage of attaching the debugger to a Form that runs outside of the Builder is that the Form can be running on a different machine other than the one debugging it. The configuration gives an end user the opportunity to run the Form and encounter errors while the developer debugs interactively with the user.
    To start debugging a Form that runs outside the Builder, the Form must be invoked with the parameter Debug=yes passed in the URL. This parameter will invoke a dialog that displays the host name and port number.
    In the Forms Builder, open the FMB for the running Form, and select Debug | Attach Debug. You'll need to supply the host name and port number to start debugging the running Form.

  • Running Form in Debug Mode: How? (Appletviewer/J initiater)

    Hi All,
    I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
    Thanks,
    Easo

    You can also check Francois Degrelle excellent answer to the same question:
    Running a form in debug mode

  • Exception when running form in debug mode

    Hello,
    appreciate any help on this.
    everything is fine when oracle forms 10g is run with debug=no, but when debug=yes
    throws this exception in the sun java console.
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Forms Applet version is : 10.1.2.0
    java.lang.ClassNotFoundException: Execute
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    It s supposed to show the debug window with the host name and port number to do the attach debug in builder but instead throws the above.
    if i dont mention port=xxxx in the default configuration in formsweb but just have debug=yes , the applet just crashes.

    You can also check Francois Degrelle excellent answer to the same question:
    Running a form in debug mode

  • How do I run CRX in debug mode with CQ5 , CRX version is 1.0.1

    I tried below commands But Attached Debug option under Debug menu option is still disabled.
    Option 1 :
    C:\author>java -debug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_sock
    et,server=y,suspend=n,address=30303 -jar cq-author-4502.jar
    Listening for transport dt_socket at address: 30303
    Loading quickstart properties: default
    Loading quickstart properties: instance
    Low-memory action set to fork
    Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
    nts=[-Xmx1024m, -XX:MaxPermSize=256m]
    The JVM reports a heap size of 1781 MB, meets our expectation of 1024 MB +/- 20
    **** WARNING: insufficent PermGen memory ***************************************
    The JVM MBean:PS Perm Gen reports 82 MB but we recommend at least 256 MB +/- 20
    Use your JVM's PermGen size option (like -XX:MaxPermSize=256M) to set that size.
    Will fork a JVM to get enough memory.
    Available memory below specified limits and low-memory action set to fork, will
    fork to get enough memory
    Preparing to fork JVM, OS name=Windows 7, isWindows=true
    Forking JVM: [C:\Program Files\Java\jre6\bin\java.exe, -Xmx1024m, -XX:MaxPermSiz
    e=256m, -jar, C:/author/cq-author-4502.jar, -nofork, -pt, CHILD]
    Loading quickstart properties: default
    Loading quickstart properties: instance
    Low-memory action set to fork
    Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
    nts=[-Xmx1024m, -XX:MaxPermSize=256m]
    **** WARNING: insufficent heap memory ******************************************
    The JVM reports 910 MB but we recommend at least 1024 MB +/- 20
    Use your JVM's heap size option (like -Xmx1024M) to set that size.
    Will fork a JVM to get enough memory.
    The JVM MBean:PS Perm Gen reports a maximum size of 256 MB, meets our expectatio
    n of 256 MB +/- 20
    Available memory below specified limits and low-memory action set to fork, will
    fork to get enough memory
    Not forking JVM as -nofork option is set
    Setting properties from filename 'C:/author/cq-author-4502.jar'
    Property '-quickstart.server.port' set to '4502' from filename cq-author-4502.ja
    r
    Property '-r' set to 'author' from filename cq-author-4502.jar
    Property '-r' is already set (author), ignoring new value (author) derived from
    filename
    System property 'sling.run.modes' set to 'author' by -r option
    Verbose option not active, closing stdin and redirecting stdout and stderr
    Redirecting stdout to C:\author\.\crx-quickstart\logs\stdout.log
    Redirecting stderr to C:\author\.\crx-quickstart\logs\stderr.log
    Press CTRL-C to shutdown the Quickstart server...
    Shutdown
    MAIN process: shutdown hook
    MAIN process: Exception in shutdown hook: java.io.IOException: The pipe is being
    closed
    MAIN process: Wrote shutdown string to child process, waiting for it to exit (ma
    x 5000 msec)
    Child process did not exit? Destroying it now.
    MAIN process: Child process exited.
    MAIN process: exiting
    Forked JVM process exited with exit code 1
    Main JVM process exiting
    OPtion 2:
    C:\author>java -Xmx512m -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=3
    0303,suspend=n -jar cq-author-4502.jar
    Listening for transport dt_socket at address: 30303
    Loading quickstart properties: default
    Loading quickstart properties: instance
    Low-memory action set to fork
    Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
    nts=[-Xmx1024m, -XX:MaxPermSize=256m]
    **** WARNING: insufficent heap memory ******************************************
    The JVM reports 455 MB but we recommend at least 1024 MB +/- 20
    Use your JVM's heap size option (like -Xmx1024M) to set that size.
    Will fork a JVM to get enough memory.
    **** WARNING: insufficent PermGen memory ***************************************
    The JVM MBean:PS Perm Gen reports 82 MB but we recommend at least 256 MB +/- 20
    Use your JVM's PermGen size option (like -XX:MaxPermSize=256M) to set that size.
    Will fork a JVM to get enough memory.
    Available memory below specified limits and low-memory action set to fork, will
    fork to get enough memory
    Preparing to fork JVM, OS name=Windows 7, isWindows=true
    Forking JVM: [C:\Program Files\Java\jre6\bin\java.exe, -Xmx1024m, -XX:MaxPermSiz
    e=256m, -jar, C:/author/cq-author-4502.jar, -nofork, -pt, CHILD]
    Loading quickstart properties: default
    Loading quickstart properties: instance
    Low-memory action set to fork
    Using 64bit VM settings, min.heap=1024MB, min permgen=256MB, default fork argume
    nts=[-Xmx1024m, -XX:MaxPermSize=256m]
    **** WARNING: insufficent heap memory ******************************************
    The JVM reports 910 MB but we recommend at least 1024 MB +/- 20
    Use your JVM's heap size option (like -Xmx1024M) to set that size.
    Will fork a JVM to get enough memory.
    The JVM MBean:PS Perm Gen reports a maximum size of 256 MB, meets our expectatio
    n of 256 MB +/- 20
    Available memory below specified limits and low-memory action set to fork, will
    fork to get enough memory
    Not forking JVM as -nofork option is set
    Setting properties from filename 'C:/author/cq-author-4502.jar'
    Property '-quickstart.server.port' set to '4502' from filename cq-author-4502.ja
    r
    Property '-r' set to 'author' from filename cq-author-4502.jar
    Property '-r' is already set (author), ignoring new value (author) derived from
    filename
    System property 'sling.run.modes' set to 'author' by -r option
    Verbose option not active, closing stdin and redirecting stdout and stderr
    Redirecting stdout to C:\author\.\crx-quickstart\logs\stdout.log
    Redirecting stderr to C:\author\.\crx-quickstart\logs\stderr.log
    Press CTRL-C to shutdown the Quickstart server...

    Hi Manoj,
    You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
    Let me know if you need more information.
    Thanks,
    Pawan

  • FlashBuilder 4.7 will not run in Debug mode with BlackBerry 10 simulator

    We have developed an app that has been released both for Apple and Android working well.
    When trying to do the same for BlackBerry it was rejected because it did not start at all.
    The App that runs fine on the BlackBerry simulator in the "run configurations mode".
    However when I try to run it in Debug mode it will not start at all. Just flashes and simulator goes back to main menu.
    The debugger will after a while time out since it cannot connect to the app running on the simulator.
    BlackBerry 10 Simulator runs under vmWare Fusion.
    Anyone seen this before?

    Hi, Silence04. Welcome to the Discussions.
    You had serious disk directory corruption. That can also cause corruption in OS files: while Disk Utility or DiskWarrior may fix the directory, if the directory corruption resulted in OS files being damaged — as it appears to be in this case — then you can't avoid an Archive and Install. For important tips on this, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How to run the forms under debug Mode?

    Hi,
    I run my form under debug mode by introducing a break point on a trigger. But i am receive the following error how to solve this issue.
    JVM aborting and followed by the following one.
    FRM-92101: There was a failure in the forms server during startup.
    This could happend due to invalid configuration.
    Please look into the Web-server log files for details.and additional information from Java console.
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Forms Applet version is : 10.1.2.0
    oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process.
         at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
         at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
         at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
         at oracle.forms.net.HTTPNStream.flush(Unknown Source)
         at java.io.DataOutputStream.flush(Unknown Source)
         at oracle.forms.net.StreamMessageWriter.run(Unknown Source)I am running on my standalone machine.
    Where and what file i want to look into this to solve this issue.
    Good help will be appreciated. Thank in advance.
    kanish

    Kanish,
    Lets start with a few of the basics, shall we. What JVM are you using (Jinit or Sun JRE and the version)? Based on the error you posted, I can infer that you are using Forms 10.1.2.0? Are you running a custom configuration in the formsweb.cfg and default.env? This could be the cause if you have modified the CLASSPATH setting in the default.env excluding core .jar files.
    Typically, the FRM-92101 error is caused by a Java error; either a .jar is not found or invalid or not compatible with JVM, etc.
    Have you tried clearing your Java Cache to check for a corrupt .jar?
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Help with running PE 2.0 on computer with Windows Vista?

    I am having problems opening my older version 2 of photoshop elements after installing it on a laptop with Windows Vista.   It loads but freezes up when I try to open the program.  I do have the program loaded on a desk top system with XP and it runs just fine.  Can any one give me any suggestions to get PE to open on my laptop.  Thank you very much.
    MaryK.

    Thank you so very much.  It worked.  It was simple enough and  runs like a
    champ. 
    Mary
    In a message dated 8/9/2009 8:15:29 P.M. Central Daylight Time, 
    [email protected] writes:
    Some  people have reported success running older versions of PSE in XP
    compatibility  mode on Vista.  To do that, right-click the PSE 2 icon on your
    desktop or  Start Menu, select Properties, and on the Compatibility tab,
    select Run This  Program In Compatibility Mode For Windows XP. 
    To help  others, let us know if this  works.

  • I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem?

    I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program? 

    I'd start with the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

  • Hp zv5242qv laptop with windows vista will not run on battery but will run on power adapter

    Hello, I have a HP zv5242qv pavilion zv5000 series laptop with windows vista installed. I can run it on the power adapter with and without the battery installed but it will not power up on just the battery, the battery is new and fully charged. When I plug in the power adapter the battery light on the front of the laptop comes o then goes off, anyone have any ideas about my problem ?

    Hello,
    The situation you describe looks like the unit has problems with the battery, but you say the battery is new and is fully charged.
    Then, the issue might be with the system board and maybe there isn't anyhting you can do.
    You can try to remove the battery and the ac adapter, and keep the power button pressed for 30 seconds, then connect the ac adapter, turn on the unit, then when in windows put the battery in place, see how it is detected, the power level and restart the PC. See if the unit restarts with the battery in place, if yes, then shutdown the unit. 
    See what happens and report back.
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • How to run labview program in debugging mode in windows 95 version

    Respected all,
    I am facing probelm while running probe.vi.
    I received this command "connection to acquisition board was not found" when i run labview program.
    I  am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
    I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
    Thanking You
    Yours faithfully
    M.Vijay

    Respected Norbert,
    Thank you very much to for your help.
    Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
     I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
    Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
    I am asking you to know, If i using Labview and  Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
    But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
    I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
    The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
    I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
    I also removed AT-AO-10 software from device manager >> Data Acquisition system >>  AT-AO-10 just now.
    I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
    I am eagerly waiting for your help.
    Thanking You
    Yours faithfully
    M.vijay

  • I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  Thi

    I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  This is a big problem.  I must be able to save on the newer computer.  Do I need to buy a new computer with a more up-to-date OS?  Please help.

    Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

  • Can i run elements 13 with windows vista

    is anyone running elements 13 with windows vista?

    Adobe Photoshop Elements 13 for Mac, Windows - System requirements
    Only Windows 7 or Windows 8.

  • Install disk doesn't work with Windows Vista

    I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista.  Apparently there's no ful feature option for Windows Vista on an HP laptop.  After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

    I am having a very similar problem but do not have an answer either.  I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160.  I am running Windows XP Pro.  The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal.  After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in.  Remove the replicator and reboot and it worked ok.  Plug it in again and BSOD.  I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2.  No go.  Emailing Targus with the problem got no response.  The port replicator is now relegated to my junk heap of useless rubbish.

Maybe you are looking for