Run query and get unexpected node values

Hi,
I am not seeing what should be expected when I run my query, and I am getting the display of the hierarchy nodes that I am not supposed to get access to. I checked my profile and I have the 0COSTCENTER as '*' and TCTAUTHH as ':' .
Where should I start finding why I am getting the node values displayed that I am not supposed to?
Thanks
Will

Welcome to SDN.
I think you should better post it to the BI forum.
Did you try to use the user exit EXIT_SAPLRRS0_001 (extension RSR00001) to initialize the values? And for bypassing the selection screen, can't you define it in the query definition (if I remember well)?

Similar Messages

How to get the Node Value from XmlValue result?

Hi ,
I am not able to get the Node Value from the result. In my XQuery im selecting till a Node, if i change my query as
collection('PhoneBook')/phone_book/contact_person/address/string()", qc);
im getting the node value, but here the problem is its not a Node so i cannot get the Node name.
So how can i get the Node Name and Node value together?
any help please ????
XML :
<?xml version="1.0" encoding="UTF-8"?>
<phone_book>
<contact_person>
<name>
<first_name>Michael</first_name>
<second_name>Harrison</second_name>
</name>
<address city="yyyyy" pincode="600017" state="xxxxx">
176 Ganesan street, Janakinagar, alwarthirunagar
</address>
</contact_person>
<phone_number type="mobile">9881952233</phone_number>
<phone_number type="home">044-24861311</phone_number>
<phone_number type="office">080-12651174</phone_number>
</phone_book>
Code:
XmlQueryContext qc = manager.createQueryContext();
XmlResults rs = manager.query
("collection('PhoneBook')/phone_book/contact_person/address", qc);
while(rs.hasNext()){
XmlValue val = rs.next();
System.out.println(val.getNodeName() + " = [ " + val.getNodeValue() + " ] ");
Output
address = [ ]

You are right, this seemed un-intuitive to me too, but I finally understood how it's done.
The "value" of a node is actually the total amount of text that is not contained in any of the node's child nodes (if any). So a node with child nodes can still have text value.
To get the 'value' of an element node, you must therefore concatenate the values of all children of type "XmlValue::TEXT_NODE", of that node. Try it.
In your example, the <address> node has no child elements, my guess is that BDB XML stores the address string "176 Ganesan street, Janakinagar, alwarthirunagar" inside a child node of <address> node (of type XmlValue::TEXT_NODE) because you wrote the string on a separate line.

How to find colums in CLOB variable and get this colums value to update col

Question
How to find colums in CLOB variable and get this colums value to update colum of oracle database table
How my work will go
Step-1 - I am creating XML FIle which is based on code that we discused before-
Its developing xml file with data in <...inputelement> as u can see in my xml but in <..output> Element of xml its just have all column for exampe <itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
In 1st stage i am just generating <..INPUT> with its colums and real value from database and <..output> elements will go zero value but with colums name.
Note. I create temp table will all COLUMN which u can see in both in <..ITEMINPUT> and <..ITEMOUTPUT>
Step2.. After Generaing my xml i want to convert my xml data into CLOB not in a file. so clob will go to the VENDOR
STEP3.
I will Recieved again xml data in CLOB from the vendo in <.OUTPUT> ELEMents
for example
I send this format
<itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
And i will receive it
<itemoutput>
<FLD NM = "ABC VALUE"> 2 </FLD>
<FLD NM = "XYZ TYPE:> SUV</FLD> --- for varchar2
</itemoutput>
So will take this output valu from xml clob and will update my staging table .
Which have the same colum name as its look in xml clob.
Step- 4. I will take this value from staging table and update my original oracle database table. which i send you before.
But u leave this step becaue you dont know the staging table colum maping with original table.
I think now you understand
Please feed back
monriz

here is my xml..
I want to extract <..output> elements which enclosed with " " and its values from this xml file. please any body have any idea. please tell me
Thanks
<?xml version="1.0" ?>
- <RATABASECALC COPYRIGHT="COPYRIGHT 2001>
- <RATEREQUEST USEREFID="YES">
- <ANCHOR>
<DATABASENAME />
<DATABASEPW />
<DATABASESOURCE />
<DATABASEPRVDR />
<USERNAME />
<SEVERITYDES />
<CALLDES />
<INITACCDES />
<INITACCV />
<ITEMSEQDES />
<ITEMMATCHDES />
<CENTURYDES />
<DATEDES />
<FORMULADES />
<STRINGDES />
<VALIDATIONDES />
<STEPSDES />
<RETINFONUM />
<ADDLRETINFONUM />
<ANCHORNOMATCH />
<NOMATCHMSG />
<TRANUUID />
<LOGOPTION />
<MSGOPTION />
<USERLOGFN />
<NOITEMERROR />
<LOGFORMAT />
<LOGFN />
<STEPSFN />
<NUMNOMATCH>0</NUMNOMATCH>
<NUMERRORS>0</NUMERRORS>
</ANCHOR>
- <POLICIES>
- <POLICY>
<BUSINESSDES>N</BUSINESSDES>
<LEGALENTITYOWNER>CGI TRAINING AND DEMONSTRATION</LEGALENTITYOWNER>
<LEGALENTITYNAME>CGI TRAINING AND DEMONSTRATION</LEGALENTITYNAME>
<COMPEFFDATE>02/01/2000</COMPEFFDATE>
<RETRIEVALDATE>02/01/2000</RETRIEVALDATE>
<POLINPUTS />
- <POLOUTPUTS>
<FLD NM="POLICY CALCS DONE IND">Y</FLD>
<FLD NM="TOTAL DISCOUNTED POLICY PREM">2167.52</FLD>
<FLD NM="TOTAL POLICY PREMIUM">3180.0</FLD>
</POLOUTPUTS>
- <LOBS>
- <LOB>
<LEGALENTITYPRODGROUP>PERSONAL AUTOMOBILE</LEGALENTITYPRODGROUP>
- <LOBINPUTS>
<FLD NM="MULTI-CAR FACTOR">0</FLD>
<FLD NM="MULTI-CAR IND">Y</FLD>
</LOBINPUTS>
<LOBOUTPUTS />
- <REGIONS>
- <REGION>
<LEGALENTITYREGION>MAINE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">2356.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">2167.52</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">188.48</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>3</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R1C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F1" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">145.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C2">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F2" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">209.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C3">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F3" />
<COVINPUTS />
<COVOUTPUTS />
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">100</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">15</FLD>
<FLD NM="TOWING INDICATOR">Y</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">11</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">B</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">A</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.84</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1166.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">438</FLD>
<FLD NM="TOTAL COMP PREMIUM">218</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">475</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">4</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">50</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">12</FLD>
<FLD NM="TOWING INDICATOR">N</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">12</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.88</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1190.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">468</FLD>
<FLD NM="TOTAL COMP PREMIUM">194</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">497</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">0</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C2" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
<ITEMINPUTS />
<ITEMOUTPUTS />
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C3" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F1">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F2">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F3">
<FORMULANAME>PREMIUM DISCOUNT</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
- <REGION>
<LEGALENTITYREGION>NEW HAMPSHIRE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">824.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">0</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">0</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>2</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R2C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F4" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">0.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">500</FLD>
<FLD NM="COMP DEDUCTIBLE">250</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">Y</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">11</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1996</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">Y</FLD>
<FLD NM="GOOD STUDENT IND">Y</FLD>
<FLD NM="CLASS CODE">36</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">0</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">1.11</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">824.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">332</FLD>
<FLD NM="TOTAL COMP PREMIUM">123</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">334</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">8</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R2C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F4">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
</REGIONS>
</LOB>
</LOBS>
- <RETINFOS>
<TOTALRI>0</TOTALRI>
</RETINFOS>
</POLICY>
</POLICIES>
</RATEREQUEST>
</RATABASECALC>
Above xml data - some <...OUTPUT> elements has some FLD elements. and i want to take those outputelemt's FLD Elements data and update my oracle tables.
Note: FLD = "Attribie" are the colums name of the tables
back to top

How to call an Oracle Procedure and get a return value in Php

Hi Everyone,
Has anyone tried calling an Oracle procedure from Php using the ora functions and getting the return value ? I need to use the ora funtions (no oci)because of compatibility and oracle 7.x as the database.
The reason why I post this here is because the ora_exec funtion is returning FALSE but the error code displayes is good. Is this a bug in the ora_exec funtion ?
My code after the connection call is as follows:
$cur = ora_open($this->conn);
ora_commitoff($this->conn);
$requestid = '144937';
echo $requestid;
$rc = ora_parse($cur, "begin p_ins_gsdata2
(:requestid, :returnval); end;");
if ($rc == true) {
echo " Parse was successful ";
$rc2 = ora_bind ($cur, "requestid", ":requestid", 32, 1);
if ($rc2 == true) echo " Requestid Bind Successful ";
$rc3 = ora_bind ($cur, "returnval", ":returnval", 32, 2);
if ($rc3 == true) echo " Returnval Bind Successful ";
$returnval = "0";
$rc4 = ora_exec($cur);
echo " Result = ".$returnval." ";
if ($rc4 == false) {
echo " Exec Returned FALSE ";
echo " Error = ".ora_error($cur);
echo " ";
echo "ErrorCode = ".ora_errorcode($cur);
echo "Error Executing";
ora_close ($cur);
The Oracle procedure has a select count from a table and it returns the number of records in that table. It's defined as:
CREATE OR REPLACE procedure p_ins_gsdata2 (
p_requestid IN varchar2 default null,
p_retcode OUT varchar2)
as
BEGIN
SELECT COUNT (*) INTO p_retcode
FROM S_GSMRY_DATA_SURVEY
WHERE request_id = p_requestid ;
COMMIT;
RETURN;
END;
Nothing much there. I want to do an insert into a table,
from the procedure later, but I figured that I start with a select count since it's simpler.
When I ran the Php code, I get the following:
144937
Parse was successful
Requestid Bind Successful
Returnval Bind Successful
Result = 0
Exec Returned FALSE
Error = ORA-00000: normal, successful completion -- while
processing OCI function OBNDRA
ErrorCode = 0
Error Executing
I listed the messages on separate lines for clarity. I don't understand why it parses and binds o.k. but the exec returns false.
Thanks again in advance for your help. Have a great day.
Regards,
Rudi

retcode=`echo $?`is a bit convoluted. Just use:
retcode=$?I see no EOF line terminating your input. Your flavour of Unix might not like that - it might ignore the command, though I'd be surprised (AIX doesn't).
replace the EXEC line with :
select 'hello' from dual;
and see if you get some output - then you know if sqlplus commands are being called from your script. You didn't mentioned whether you see the banner for sqlplus. Copy/paste the output that you get, it will give us much more of an idea.

How to get the node value of payload

Hi
The null is returned when I use the following code to get the User_ID element in the payload, but there are values in the User_ID element of the payload
Task task_test = wfSvcClient.getTaskQueryService().getTaskDetailsById(wfCtx, taskId);
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getNodeValue());
How to get the node value of payload ? any suggestion?
Thanks
Jayson

Hi Jayson,
Try:
System.out.println("the payload value is " + task_test.getPayloadAsElement().getElementsByTagName("User_ID").item(0).getFirstChild().getNodeValue());
So add the getFirstChild() call in between.
If this works, maybe consider using JAXB to marshall the payload details to POJO's. This will make reading the payload details much easier.
Regards, Ronald

Issue using extractval to get the node value when there is namespace

I created the db with a XMLType column:
CREATE TABLE mytable1 (key_column VARCHAR2(10) PRIMARY KEY, xml_column1 XMLType);
Then inserted one row:
INSERT INTO mytable1 (key_column,xml_column1) VALUES ('test', XMLType('<MY_TEST xmlns="http://xmlns.oracle.com/ku" version="1.0">
<SCHEMA>SYSTEM</SCHEMA>
<NAME>TABLE41</NAME>
<TEST_GROUP>TEST_GRP_RMP</TEST_GROUP>
<TEST_NAME>DEPARTTEST</TEST_NAME>
<FUNCTION_SCHEMA>SYSTEM</FUNCTION_SCHEMA>
<TEST_FUNCTION>EXCLUDE_TABLE</TEST_FUNCTION>
<STATEMENT_TYPE_LIST>
<STATEMENT_TYPE_LIST_ENTRY>
<NAME>SELECT</NAME>
</STATEMENT_TYPE_LIST_ENTRY>
</STATEMENT_TYPE_LIST>
<UPDATE_CHECK>Y</UPDATE_CHECK>
<ENABLE>Y</ENABLE>
<STATIC_POLICY>N</STATIC_POLICY>
<TEST_TYPE>DBMS_RLS.DYNAMIC</TEST_TYPE>
<LONG_PREDICATE>N</LONG_PREDICATE>
</MY_TEST>'));
Then I ran:
select extractValue(xml_column1,'MY_TEST/TEST_NAME') policy from mytable1;
There is nothing returned.
If i do not have "xmlns="http://xmlns.oracle.com/ku" " in MY_TEST node, then the correct value returned.
Please advise how could I get the node value when there is namespace? Thanks.

This is a known issue. In the third parameter of extractvalue, set the namesapce. Then it works.

Call a webservice and get back a value within an ESB...

Hi!
I'd like to call a webservice and get back a value from it within an ESB. But I don't know how.
I think, I must create a routing service, then a SOAP service, but how can I get back the value from the webservice, which I called in the SOAP service?
Or it is not possible to realize this within an ESB?
Thank You very much!
Viktor

When you take a look at the Soa Orderbooking example you can see how it works. You create a webservice that accepts certain parameters and these are bundled into an object. This object, in case of the Soa Orderbooking example a 'PurchaseOrder', is described using an Xml Schema. The XML Schema is used to create the ESB with. Using this xsd the ESB knows which object it can expect and this object can be used inside your ESB or inside a bpel process.

Mac book pro running slow and getting pop ups

mac book pro running slow and getting pop ups

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Lookup query to get Manager ID value on object form

Hi ,
I have created a Manager ID field on object form which is of type lookup field.
Can any one please tell me that how can i write Lookup query to get Manager ID value on object form.
Thanks in Advance

I was looking for something like this today too.
Here's what I came up with:
SELECT fu.user_id, fu.employee_id, fu.user_guid, pe1.full_name, pe2.full_name SUPERVISOR, pe2.employee_id
FROM fnd_user fu
JOIN per_employees_x pe1 on pe1.employee_id = fu.employee_id
JOIN per_employees_x pe2 on pe2.employee_id = pe1.supervisor_id
WHERE fu.user_id = $(user_id)
Edited by: user12232265 on Feb 24, 2010 3:20 PM

Union two query and get a value

hello...i am new in programming..need some help..i have one union query like this..
select tb_user.userid,
NVL((SUM(TB_class.time)),0) AS day
FROM tb_user, TB_class, TB_classcon, TB_DETAIL, TB_partner, tbl_department
where TB_classcon.userid = tb_user.userid
AND TB_classcon.IDDETAIL = TB_DETAIL.IDDETAIL
AND TB_DETAIL.IDpartner = TB_partner.IDpartner
AND TB_partner.code = TB_class.code
and tbl_department.deptcode = tb_user.deptcode
and tb_user.deptcode='70'
AND to_char(TB_DETAIL.statdate,'YYYY') = 2011
AND TB_classcon.STATUS = 'come'
group by tb_user.userid
UNION
select tb_user.userid,
(SELECT NVL((SUM(TB_KURBAH.time)),0) FROM TB_KURBAH WHERE TB_KURBAH.IDSTAF = tb_user.userid) AS day
FROM tb_user, TB_class, TB_classcon, TB_DETAIL, TB_partner, tbl_department,TB_KURBAH
where TB_KURBAH.userid != tb_user.userid
AND TB_classcon.IDDETAIL = TB_DETAIL.IDDETAIL
AND TB_DETAIL.IDpartner = TB_partner.IDpartner
AND TB_partner.code = TB_class.code
and tbl_department.deptcode = tb_user.deptcode
and tb_user.deptcode='70'
AND to_char(TB_DETAIL.statdate,'YYYY') = 2011
AND TB_classcon.STATUS = 'come'
group by tb_user.userid
Result
userid day
33478 5
33478 6
33500 8
33655 3
34260 0
34260 2
Query 1 result
userid day
33478 6
34260 2
Query 2 result
userid day
33655 3
33478 5
33500 8
34260 0
But i need help to get result like this..
userid day
33478 11 (6+5)
33500 8 (0+8)
33655 3 (0+3)
34260 2 (2+0)
help me plz...tq..

select userid, sum(day)
from
select tb_user.userid,
NVL((SUM(TB_class.time)),0) AS day
FROM tb_user, TB_class, TB_classcon, TB_DETAIL, TB_partner, tbl_department
where TB_classcon.userid = tb_user.userid
AND TB_classcon.IDDETAIL = TB_DETAIL.IDDETAIL
AND TB_DETAIL.IDpartner = TB_partner.IDpartner
AND TB_partner.code = TB_class.code
and tbl_department.deptcode = tb_user.deptcode
and tb_user.deptcode='70'
AND to_char(TB_DETAIL.statdate,'YYYY') = 2011
AND TB_classcon.STATUS = 'come'
group by tb_user.userid
UNION ALL
select tb_user.userid,
(SELECT NVL((SUM(TB_KURBAH.time)),0) FROM TB_KURBAH WHERE TB_KURBAH.IDSTAF = tb_user.userid) AS day
FROM tb_user, TB_class, TB_classcon, TB_DETAIL, TB_partner, tbl_department,TB_KURBAH
where TB_KURBAH.userid != tb_user.userid
AND TB_classcon.IDDETAIL = TB_DETAIL.IDDETAIL
AND TB_DETAIL.IDpartner = TB_partner.IDpartner
AND TB_partner.code = TB_class.code
and tbl_department.deptcode = tb_user.deptcode
and tb_user.deptcode='70'
AND to_char(TB_DETAIL.statdate,'YYYY') = 2011
AND TB_classcon.STATUS = 'come'
group by tb_user.userid
group by userid;Edited by: hm on 08.11.2011 23:17
Please use "UNION ALL" in this case!
(Otherwise duplicates will be removed in union query and it would fail if days would be the same in both queries)

How to set the value of an LOV in CO prgramatically and get the Pkey value?

Hi,
I need to set a value to a LOV, say ItemLOV in a page through CO and get the Primaykey that LOV will return. How can I achieve this?
Req:
1. Set the Item_Name, say 'DELL_1618' so that the page displays this in the LOV.
2. Fetch the PK value returned by LOV in the backend into a VO attribute say Item_ID, '100009881'.
Thanks,
Santosh.

Hi Santosh,
Sorry, I replied for General LOV Scenario, but want to set it programatically right,
You need to execute your LOV query in Controller for Item 'DELL_1618' using prepared statement, get the value for both dispaly value and Id and set it to LOV and FormVlaue Item in PR of controller.
Regards,
Reetesh Sharma

Do I need a sub-query and getting ORA-00937 error

I'm writing a query where I want returned all data that is in a list 510 and all duplicate entries for the AID are eliminated.
select *
from entities e
where e.list_id in
(select aid
from entities e
where e.list_id = 510
having count(e.aid) > 1);
When I run this, I get ORA-00937: not a single-group group function.
I google the error and see
http://ora-00937.ora-code.com/
Which tells me I can't have a group function and individual column expression.
So I removed the group by, but I still get the errors, and for some reason when I put the alias e for the aid in the subquery, I still get the same error.
Hopefully this makes sense what I'm asking...
thanks

if you want to select rows that eliminate duplicates then you should be using distinct. And if you want to get the duplicate rows then,
select *
from entities e1
where e1.rowid <
(select max(e2.rowid)
from entities e2
where e2.list_id = 510
and e1.aid = e2.aid);

Present a dialog screen to the user that always stays open and gets updated with values from teststand.

Hello,
I'm new to TestStand and just created my first sequences with TS and LV.
The program is running fine but now I need to implemented a dialog screen with some progress results for the user.
This dialog screen must stay open (unless closed by the user) and gets refreshed with the latest analysis results from TestStand.
Is there an example of something like that. (starting from a working example is always easier)
So I need a mechanism to give some results from TestStand to a custom made dialog screen in LabVIEW.
Any thoughts/examples/recommandations ???
Thanks!

Hi noxus,
The basic design you are looking for is a daemon, This is basically a VI that runs in the background (your dialog VI for example). This VI is launched dynamicly when needed. And there should be a way of detecting if the deamon is running.
You can use various ways of communicating between VI's. The two most use full I find either Queues or TCP. The added bonus for TCP is that it also works over the Network, but could also be slower and blocked by Firewalls. Queues only work within the LabVIEW Process running on the Local machine and provide a nice way of detecting if the daemon VI is running.
Attached a example that show how you can implement something like this. The 'sent new value.vi' obtains a queue reference, we check if it has created a new queue or if it returned an existing queue reference. If the obtain queue created a new queue this means the daemon is not running and we launch the deamon.vi.
The daemon also connects to the same queue and maintains the reference. If the deamon is closed the referenced is closed as well and the queue is destroyed.
You can run the example VI. (in LabVIEW 8.2).
Hope this helps.
Thanks
Karsten
Attachments:
Daemon.zip ‏35 KB

Ipod Nano 5th GenerationWindows xp. My nano no longer opens automatically with file options menu. Trying to import priceless videos of my daughter from ipod to computer so I run it and get these results: My computer/ipod/dcim/000apple and 75 IMG.DAT

Nano 5th GenerationWindows xp.
My nano no longer opens automatically with file options menu when I connect it to my lap top. Trying to import priceless videos of my daughter from ipod to computer, However, when I run it I get these results: I click onto My computer/ipod/dcim/000apple and 75 IMG.DAT files come up. Now I am almost sure those files shouldnt be on there. If my memory serves me corrrectly the dcim folder is where one should be able to find video recording made with their iopd?If there is a way to import these videos without having to reset my ipod and lose precious videos please please let me know? HELLLLLLP

Try: http://discussions.apple.com/thread.jspa?threadID=743515&tstart=15

VB Script to accept PC names in text file and get registry key value out of those systems

Hi All,
My task: Create VB script to accept PC names from a text file, process each host name to get Registry key value of individual host name and finally export them to a text file or an excel sheet having registry key value against each pc.
I want to pull key value of LSFORCEHOST located in HKCU/Environment of each PC and export this value against each pc in a text or Excel file.
What I achieved: I am able to process against single pc name but failed to process 3000+ systems listed in a text file which I tried to process through VB script. I am not pro and learning the VBS and cant write complex code.
My VBS code written so far(It failed many time with issue):
Option Explicit
Const HKEY_CURRENT_USER = &H80000001
Dim oFSO, sFile, oFile, sText, strComputer,oReg, strKeyPath, strValueName, strValue, objFSO, objFile, strContents
Set oFSO = CreateObject("Scripting.FileSystemObject")
sFile = "test.txt"
If oFSO.FileExists(sFile) Then
Set oFile = oFSO.OpenTextFile(sFile, 1)
Do While Not oFile.AtEndOfStream
sText = oFile.ReadLine
If Trim(sText) <> "" Then
strComputer = sText
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
strComputer & "\root\default:StdRegProv")
strKeyPath = "Environment"
strValueName = "LSFORCEHOST"
oReg.GetStringValue HKEY_CURRENT_USER,strKeyPath,strValueName,strValue
Const ForReading = 1
Const ForWriting = 2
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile("C:\destination.txt",1, ForReading)
strContents = strValue
Set objFile = objFSO.OpenTextFile("C:\destination.txt",2, ForWriting)
objFile.Write strContents
objFile.Close
End If
Loop
oFile.Close
End If
I think when I tried to process each PC name from text file against registry key value, above code not working. As per my knowledge some issue in loop. Do I need to add FOR EACH feature?
Please help to correct it. Thanks in advance.

I think when I tried to process each PC name from text file against registry key value, above code not working. As per my knowledge some issue in loop. Do I need to add FOR EACH feature?
Please help to correct it. Thanks in advance.
Your code contains numerous errors. Furthermore you make things difficult for yourself by giving similar names to the objects used for your input and output. If you are a systems administrator then your best bet is to make an effort to learn the language
instead of grabbing a few code fragments from here and there and hoping that somehow they will work.
Try the cleaned up code below for this particular project. Note the consistent code indentation. It helps you enormously when trying to understand the structure of the code. Remember also that you must fully qualify all file paths. Writing to "Destination.txt"
will cause endless confusion because you never know for sure where this file will reside.
Const HKEY_CURRENT_USER = &H80000001
Set oFSO = CreateObject("Scripting.FileSystemObject")
sKeyPath = "Environment"
sValueName = "LSFORCEHOST"
sFile = "D:\Test.txt"
If oFSO.FileExists(sFile) Then
Set oInput = oFSO.OpenTextFile(sFile, 1)
Do While Not oInput.AtEndOfStream
sComputer = oInput.ReadLine
If Trim(sComputer) <> "" Then
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" _
& sComputer & "\root\default:StdRegProv")
oReg.GetStringValue HKEY_CURRENT_USER,sKeyPath,sValueName,sValue
Set oOutput = oFSO.OpenTextFile("D:\destination.txt",8, True)
oOutput.WriteLine sValue
oOutput.Close
End If
Loop
oInput.Close
End If

Run query and get unexpected node values

Similar Messages

Maybe you are looking for