Run Report From Menu

I am trying to run the reprt through menu but no out put
I run the report thru the browser
http://it-test:8889/reports/rwservlet?server=repsrv&report=c:\test\t1.rep&userid=scott/[email protected]&desformat=pdf&destype=cache&paramform=yes
It works fine and i am getting the output
But when i try to run the same report through menu no out put
Code is like this:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
REP_PROPERTY VARCHAR2(100);
v_show_document     VARCHAR2 (2000) :=
'http://it-test:8889/reports/rwservlet?';
v_connect     VARCHAR2 (200) := 'userid=scott/[email protected]';
v_report_server     VARCHAR2 (30) := 'repsrv';
v_report_name     VARCHAR2(100) := 'c:\test\t1.REP';
v_format     VARCHAR2(12) := 'PDF';
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid :=Create_parameter_List('tmp');
repid := FIND_REPORT_OBJECT('t1');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'c:\test\t1.REP');
if id_null(repid) then
     pause;
     message('repid is null');
     ELSE
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repsrv');
v_rep := RUN_REPORT_OBJECT(repid,'repsrv');
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
v_show_document := v_show_document
|| v_connect
-- Report server
|| '&server='
|| v_report_server
-- Report name
|| '&report='||v_report_name
-- Reports parameters
|| '&destype=CACHE'
|| '&desformat='||v_format
|| '&paramform=yes' ;
END IF;
if
rep_status = 'FINISHED'then
pause;
message('Finished');
web.show_document(v_show_document,'_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
END;
The out put is nothing
the message displays as finished
The same i tried with
web.show_document('http://www.google.com','_blank');
no out put
can u tell me what could be the problem??
I am using Internet Explorer 7
Thanks
Elsy

Hi All,
In the Internet explorer pop up was blocked
I unblocked it and its working fine
Thanks to all

Similar Messages

Calling Report from Menu (Oracle Forms 10g)

We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

Here is the code to call report from menu in 10g
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
               --Display report in the browser
               WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

How can we run reports from the front enf of iProcurement...

Hi Guys,
I need to create a link to run reports from the front end in iProcurement webpage instead of using apps SRS to run the report...
help needed...
thanks
aman

Hi Tapashray,
That was a great help. Thank you so much. A few more clarifications needed sir..
I refered to a previous link and came to know about a prcedure he followed for a report. So is it the same way that is to be done... I pasted a descr what he said in the thread. In ur solution, you said, have a link bean. what do u mean by that. After i go thru all the steps what this guy told.
It would be of gr8 help if you kindly look in to this for one more minute sir..
thanks
Creating a new report in 11.5.9
Re: Creating a new report in 11.5.9
Posted: Mar 11, 2005 7:12 PM in response to: dhergert Reply
Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

URGENT: Report parameter form set to yes in calling report from menu

I have write this code for calling report from menu module. But where i put the code
PARAMFORM='YES' to display the report parameter form in order to enter the parameter by user.
DECLARE
pl_id ParamList;
repid REPORT_OBJECT;
v_rep varchar2(100);
v_server VARCHAR2(100);
rep_status varchar2(100);
v_host VARCHAR2(100);
BEGIN
     select rep_server into v_server from reports_data;
     select machine into v_host from reports_data;
     pl_id := Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
     Destroy_Parameter_List( pl_id );
     END IF;
     pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'P_C_NAME',TEXT_PARAMETER,:GLOBAL.COMPANY);
Add_Parameter(pl_id,'P_B_NAME',TEXT_PARAMETER,:GLOBAL.BRANCH);
Add_Parameter(pl_id,'P_user',TEXT_PARAMETER,:GLOBAL.user);
     repid := find_report_object('REPORTOBJ');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_open_balance.RDF');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
          v_rep := RUN_REPORT_OBJECT(repid, pl_id);
          rep_status := REPORT_OBJECT_STATUS(v_rep);
          WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
               LOOP
                    rep_status := report_object_status(v_rep);
                         message('Running');
               END LOOP;
          IF rep_status = 'FINISHED' or rep_status is NULL THEN
          WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
          ELSE
               null;
     END IF;
END;

Jeneesh,
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,
'paramform=YES
what about this variable ?
P_VAR1 = ........');

How to run reports thru menu in 10g

Hi,
I'm a junior oracle programmer and have already migrated forms 6i to 10g. Now I have to migrate the reports to 10g. I have read many documentations about running report from forms or menu, but the more I read, the more confused I get. Please note that I am very new to all this oracle stuff. So please bear in mind that I might not understand everything too well. Thats the reason I would like help from you experts out here.
We have a menu (mmb) which has two horizontal sub menus (eg. Forms & Reports). Now Forms and Reports again in turn hv couple of vertical sub menus. Each vertical submenu under Forms calls a form (for eg. submenu_f1 calls forms1, submenu_f2 calls forms2 and so on). Same thing for Reports (eg. submenu_r1 calls report1, submenu_r2 calls report2, etc). Now this is what we want for the Reports. Each of our report has parameters like Begin Date, End Date, Agency_Type, Year, etc. We want our user to have one more choice in the parameters "FORMAT" (pdf, excel, html, etc) . Now this is what I dont know how to do. I cannot use run_report_object here cause I cannot create a report object in menu (like how we can do it in forms). I tried web.show_document but the problem in this is that everything is hard-coded, so I cannot give a choice in the desformat.
I would appreciate if someone can tell me how to run my report thru menu and give the user the option for the format. The users mostly want the output in excel (but might want pdf, etc too).
Plus we want to schedule certain reports to run at certain times everyday or every month, how can I do that?????
Any help would greatly be appreciated.
Thanks in advance for taking your time to reply my query.

Hi,
cannot use run_report_object here cause I cannot create a report object in menu (like how we can do it in forms).
Create a generic named Report node in the forms that you reference from the RunReport object request. This way you can run Reports from a menu
Frank

How do I launch report from menu using RUN_REPORT_OBJECT?

Hi all,
Re: How do I launch report from menu (and have it print to the screen) using RUN_REPORT_OBJECT?
I am using Oracle 9iAS on Windows 2000 and I have a similar problem with launching reports from the menu. The application should call the report via the RUN_REPORT_OBJECT builtin feature from Forms. The report is never displayed.
The report is in the same folder as the menu form calling it. Do the reports have to be in a specific format? How do I get the report_id?
The name of the report is seconds_calls. No user-specified parameters are passed. Also, the report object in the object navigator in Forms is Report4 (is this relevant?)
When I try to run report via the form using this code:
DECLARE
     report_id REPORT_OBJECT;
     rep_status VARCHAR2(200);
     v_rep VARCHAR2(100);
     report_job_id VARCHAR2(200);
--     job_number NUMBER;
--     server_name VARCHAR2(200) := 'repserver';
BEGIN
     report_id:= FIND_REPORT_OBJECT('seconds_calls');
     rep_status:=REPORT_OBJECT_STATUS(report_job_id);
     v_rep := RUN_REPORT_OBJECT(report_id);
END;
I get this error message:
FRM-41219 Cannot find report:Invalid ID
And this message
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
When I tried to use the same code (above), substituting the object name for the form name,
I got these messages:
FRM-41219 Cannot find report:Invalid ID
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
And FRM-10259 Invalid null argument to packaged procedure or function (???)
Any ideas?
Cheers,
Pippa

Philippy,
substr(v_rep,instr(v_rep,'_',-1)+1)
This code extracts the Reports job id from the Reports Server name. The run_report_object() built-in
retrieves e.g. RepServ_9 as a job id, but in Reports9i you only need the '9' as a value to retrieve the
output.
Use the following sample a template. It is a procedure that expects the reports object name, teh reports server name and the
output format as an argument. The call to Web.show_document expects the ReportsSrevices to be accessible from teh same server
(relative addressing is used)
PROCEDURE RUN_REPORT_OBJECT_PROC (vc_reportobj Varchar2, vc_reportserver varchar2, vc_runformat varchar2) IS
v_report_id           Report_Object;
vc_ReportServerJob      VARCHAR2(100); /* unique id for each Report request */
vc_rep_status      VARCHAR2(100); /* status of the Report job */
vjob_id               VARCHAR2(100); /* job_id as number only string*
BEGIN
/* Get a handle to the Report Object itself. */
v_report_id:= FIND_REPORT_OBJECT(vc_reportobj);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
/* Define the Report output format and the name of the Reports Server as well as a user-defined parameter, passing the department number from Forms to the Report. We don't need a parameter form to be displayed, and therefore paramform is set to "no". */
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,      'p_deptno='||:dept.deptno||'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(report_id);
/* remove the Reports Server name from teh job id */
vjob_id := substr(vc_ReportServerJob,length(reportserver)+2,length(vc_ReportServerJob));
/* Check the report status if finished. */
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status='FINISHED' THEN
/* Call the Report output to be displayed in a separate browser window.
The URL for relative addressing is only valid when the Reports Server
is on the same host as the Forms Server. For accessing a Remote Reports
Server on a different machine, you must use the prefix http://hostname:port/ */
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid '||vjob_id ||'?server='vc_reportserver,'_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Frank

Running reports from forms on the web

On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.

S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null

Running report from forms

hi,
I am having problems in running report from form.
I am using oracle 9i on windows 2000 server and no 9iAS at the moment. On client side, i have windows xp and 9iDS installed. I want to run report from forms in 9iDS testing environment.
my forms are running ok but now i need to run report. so what i have done is that i have created a report object in form and following are enteries present in it at the moment.
Name REPORT7
FileName D:\Projects\IBMR\forms\soil_water_quality_data.rdf
Execution Mode Batch
Communication Mode Synchronous
Destination Type Cache
Report Server 9irep
and in when_button_pressed trigger
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Id := FIND_REPORT_OBJECT('REPORT7');
Report_Svr := '9irep';
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, '\projects\ibmr\forms\soil_water_quality_data.rdf');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_OTHER, 'paramform=no');
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(Report_job_id,instr(Report_Job_Id,'_',-1)+1)||'?'||'server=9irep','_blank');
else
message ('report server failed with error message '||report_status);
END IF;
END;
i have installed report server with following command
rwserver -install 9irep
i have changed entry in rwservlet.properties like
SINGLESIGNON=NO and i have removed the following entire block of 9irep.conf, which i have read from some documentation

i get the following error message when i run my form
frm-41214 Unable to run report
and then next message is
frm-41217 unable to get report job status
i debugged the report id and it is
9irep_0
returned by Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
When I checked the Report Queue Manager
it is showing status like
(9irep)Terminated with error
and detail it shows is
Unable to connect to the specified database.
Now I am wondering what to do next.
any suggestions???????

Hello,
From your description, it seems like the report is faling due to a database authentication problem. When you run your report from Forms, Forms internally passes the its database connection information to Reports automatically. So ensure that you are connected to a valid database in Forms, before the report is called.
Please verify whether a simple report which does not require a database connection, for example, a report containing only a boilerplate text object, is running correctly. Also, in the trigger code that you have specified, you should add the following:
SET_REPORT_OBJECT_PROPERTY(Report_Id, REPORT_DESTYPE, CACHE);
so that the report output gets generated to the server cache, and can be retrieved using rwservlet/getjobid.
Thanks,
The Oracle Reports Team.

I want to run report from FORM

I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6i

DECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END;

Run Report from Oracle Forms9i

Hi how are u all.......i am shahzad and i have little problem....i am working on developer 6i with oracle 9i database..........now i upgrade into developer 9i.....now the problem is that when i call the report from form then error is generated that is like'you cannot use reun run_product here use run_report_object'
Any one plz tell me how to run report from forms 9i also how to pass parameter too...means check the parameter from forms and give me the reports
guys its urgent
Thanks in advance :)
Thanks you

fot this u have to use standard code as follows
parameter list is as it was in 6i
v_report_id := FIND_REPORT_OBJECT('report name');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'dflt');
Set_Report_Object_Property(v_report_id,REPORT_OTHER,'ENVID="NFA"');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,ls_file_path||'\'||to_char(sysdate,'dd')||
     --     to_char(sysdate,'mm')||to_char(sysdate,'yyyy')||'.doc');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER, 'paramform=no');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,OUTFILE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER, 'paramform=no');
vc_report_job_id:=RUN_REPORT_OBJECT(v_report_id,pl_id);
v_jobID := substr(vc_report_job_id,length(reportserver)+2,length(vc_report_job_id));
if      vc_report_job_id is not null then
vc_rep_status := REPORT_OBJECT_STATUS(vc_report_job_id);
while vc_rep_status in ('RUNNING', 'OPENING_REPORT','ENQUEUED') LOOP
vc_rep_status := report_object_status(     vc_report_job_id);
end loop;
IF vc_rep_status<>'FINISHED' THEN
     message ('Report failed with error message '|| vc_rep_status);
          END IF;
     end if;

When run report from form(6i) on the web,error FRM-921000

While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
null

I am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null

OAS in Unix: URL not found when run report from Form???? please help

Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
null

please check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null

Call oracle reports from MENU in oracle ebs

is it possible in oracle ERP EBS R12
how to call oracle reports from menu [any screen] in oracle ebs erp r12??
please help

you may do a few things from menus and by adding buttons, but this is not really standard.
You may add button on the form or web page that after a certain action or event. You'll have to do personalization / extension and everything is present in oracle for normal report submission.
Why this is not done thru normal submission ?

Unable to run report from forms developer.

hi....
i m not very much in developer 9i.from last 2 month i m doing developer 9i.I m desiging and running
report from report builder.but i m not able to run that report from forms developer.Can anyone help to solve my problem?is there any particular extension i have to follow or any configuration(Application server) i have to made change?What code i have to write to run a report from forms?

Hi frank...
Thanx for ur reply...
Actually what i did,i created a report and save that report with .rdf extension.I set reports_path(In Registry) property to the particular folder where i put all of my reports.In forms developer i add the report as report object from that folder.i set the following few lines in a button click event
--=============================================
declare
rep_id report_object;
v_rep varchar2(30);
begin
rep_id :=find_report_object('report4');
v_rep :=run_report_object(rep_id);
end;
--=============================================
when i click the button it is showing a error "You didnot specify the report name".This is all about from me what i did to run a report from forms.So should i do to run report?

Run Report From Menu

Similar Messages

Maybe you are looking for