Running a function against a table
Hi,
I need to be able to run a function against a table column that would update the value in the column. I'm not sure about the syntax I would use to do this. Any help would be appreciated.
Thanks
Many thanks for the replies,
I have created a function that replaces a digit in the middle of a VARCHAR(14) field base on certain criteria.
I would like to be able to call the function to update the rows.
I have tried to use the syntax listed above but I am receiving the error:
The multi-part identifier "dbo.GenerateCheckDigit" could not be bound.
The syntax I am using is
UPDATE
Table1
SET Col1 = dbo.GenerateCheckDigit
Any guidance would be appreciated.
Many thanks
you need to include column information
ie
UPDATE
Table1
SET Col1 = dbo.GenerateCheckDigit(Col1)
I assume function accepts a single parameter and does the replace over it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Similar Messages
-
Run a query on linked tables to create a new datasource
Using Crystal XI
I have a report that draws from two data sources. They can't be joined at the server side, but they are linked in Crystal Database Expert.
I can't figure out if Crystal gives me a way to write an SQL Query to run an aggregate function referencing both tables. The results of this query would be the datasource for a graph in the report. I'm wondering if Crystal gives me a way, maybe through subreports, to write the query I need.
More concretely:
And I want to include in my datasource alarmId, Hour and the Maximum amount of calls received in any one hour for any one station (this maximum is to provide scale for a graph)
In one table nameed AlarmStartTimes I have data like
Alarms
AlarmID Hour Recipient
Alarm1 8 Joe
Alarm23 10 Mark
Alarm60 7 Joe
Alarm95 8 Linda
In another I have data like
EELocation
Recipient Location
Joe Station1
Mark Station2
Linda Station1
So if I could just join my talbes at the server side I'd use a query like:
select *, max(select count(AlarmID) from Alarms, EELocation from Alarms Join EELocationo on Alarms.Recipient=EELocation.Recipient group by Hour, Location) AS from Alarms
Anyway, that's probably got a syntax error or 4 in it, but you get the idea.
I can't group on the database side. Since Crystal is able to link the two tables and successfully group them out by Location, it seems like there should be some way for me to run a query against the tables reflecting that existing link, but I can't see how to do it.
The reason I can't link on database side is that the data is in two databases, and it's not known what the location of the databases is at report-writing time. The location of the databases gets set via the Crystal API when the report is launched from an application.Since you have 2 datasource in the report you are limited on what you can use in crystal, such as crystal will not allow you to use sql expressions.
-
How to use one query against multiple table and recieve one report?
I have duplicate tables, (except for their names of course) with commodities prices. They have the same column headings, but the data is different of course. I have a query that gives me a certain piece of information I am looking for but now I need to run this query against every table. I will do this every day as well, to see if the buying criteria is met. There are alot of tables though (256). Is there a way to say run query in all tables and return the results in one place? Thanks for your help.
hey
a. the all 256 tables whuld be one big partitoned table
b. you can use all_tables in order to write a select that will write the report for you:
SQL> set head off
SQL> select 'select * from (' from dual
2 union all
3 select 'select count(*) from ' || table_name || ' union all ' from a
4 where table_name like 'DB%' AND ROWNUM <= 3
5 union all
6 select ')' from dual;
select * from (
select count(*) from DBMS_LOCK_ALLOCATED union all
select count(*) from DBMS_ALERT_INFO union all
select count(*) from DBMS_UPG_LOG$ union all
remove the last 'union all', and tun the generated quary -
SQL> set head on
SQL> select * from (
2 select count(*) from DBMS_LOCK_ALLOCATED union all
3 select count(*) from DBMS_ALERT_INFO union all
4 select count(*) from DBMS_UPG_LOG$
5 );
COUNT(*)
0
0
0
Amiel -
Run queries against system tables for oracle BPEL processes
I want to run queries against system tables for oracle BPEL processes. It is becoming very difficult for me to us EM as it is very slow,
and not all the time, it is sufficient for our needs.
We are doing load testing and we want find out info like how many requests came in and how many faulted and what time is taken by each request...
So do any of you have the query that I can use and tables that I need to go against?Use the BPEL hydration database table "cube_instance".
There should be plenty of example in the forum regarding this table. -
I need to run a map against a particular dataset - how can i do it in OWB
Hello again :)
I need to run a map against table on a particular dataset (WHERE clause) - how can i do it in OWB?
The map is loading data from table A into table B (doing all sorts of wierd and wonderful things in between). Now table A had more (a lot more) data added which i have to load into table B.
How can i modify my map so that it only runs agains this newly added data (normally i would do a where clause).
i cannot find how to do it in OWB :(
The map i am runnig is fairy complex so i didn't really want have to create another table/view of the data i need then remap in all etc.
Any ideas would be greatly appreciated.
thank you very much
Kind Regards
VixHello AP
Well that is the thing - records are constantly added to table A all the time and then undergo tramsformations and loaded into table B. What i want to do is somehow indicate in the the map to only run agains records that have beed added (colmn2 = 'value').
At the moment i created a view for the desired dataset (colm2 = 'value') and remapped everything. But it is a bit of a pain:
1) there are a lot of functions and each takes a number of columns (i have some functions taking up to 6 diff columns)
2) i have data loaded to table A all the time and i need to then transform and load it to table B. so i try to aviod doing the whole re-mapping thing all the time.
In TOAD it would be a simple statment 'where colm2 = 'value' and all my functions will be run agains those records that satisfy the condition. How can i do it in OWB?
If i use filter - i would have to use 'mid' table where filtered records will be loaded and from that use 'mid' table as table A in the map. does this make sense?
the main disadvantage is the performance - moving data from one table to 'mid' table etc.
I tried using conditional load filter and it still doesn't do what i want.
After trying diff options i decided to ask people here about it. The only thing i have left to try is to ask Oracle support. I am sure it would be a 'user knowledge' as i am sure this functionality exist i just can't find any references to it.
Thank you very much for all your help. In fact this forum helped me a lot with a number of other issues :)
i just feel like a lemon coz it is very simple thing and i can't find how to do it...
Kind Regards -
Jobs to run the function modules to extract the generic extarctors
Gurus,
I have a Datasource 'ZCMS_PP_TRAN' with extract structure 'ZBW_ST_CMSD_PP'. The extract structure is populated using the function module Z_BW_GET_CMSD_PP.
But how do I schedule this FM or in general, are they run using std programs?
Thanks,
SimmiHi Simmi,
what ever it may be the DS(i mean Business Content DS, Generic DS).... these will extract the Data using Dynamic Function Calls(not always). Comming to Generic DS using FM, this will be called using Dynamic Function Module.
In RSA3 or while extracting data from BW, you will pass request number, Update Mode, debugging option, selection fields, BW source System ID, DS Name.
Based on these details system will extract the underlying extract structure and function module(or table/view/infoset).
No job(Job created from BW while extracting data in the source system BI_requestid) created for Generic DS while extracting data in SAP.
For Queue Delta, Background job will be created, it will move the data to Delta Queue.
i will update the thread with related function modules. Try to debugg in RSA3, you could find all the information.
all the best.
Nagesh. -
Update partner function in KNVP table using FM sd_customer-maintain_all
Hi All,
I have to update Partner Function PARVW in KNVP table using FM sd_customer_maintain_all.
I had already created a BDC program for updating which is running successfully.
But my requirement is to create a BAPI using FM customermaintain_all.
Ex: Tcode VD02
KUNNR PARVW KUNN2
Old data 123 Z1 70006666
123 Z2 70007777
Req. output 123 Z1 70006666
123 Z1 70007777
PARVW Z2 should not exist after updation.
When updating, I am getting the error message to my inbox as
Error Info... F2 802: System error in table KNVP
The above error is triggered while committing work after execution of SD_CUSTOMER_MAINTAIN_ALL.
The options I tried while looping at internal table containing kunnr, parvw & kunn2
CALL FUNCTION 'SD_CUSTOMER_MAINTAIN_ALL'
EXPORTING
I_KNA1 = w_kna1
I_KNB1 =
I_KNVV = w_knvv
I_BAPIADDR1 =
I_BAPIADDR2 =
I_MAINTAIN_ADDRESS_BY_KNA1 = ' '
I_KNB1_REFERENCE = ' '
I_FORCE_EXTERNAL_NUMBER_RANGE = ' '
I_NO_BANK_MASTER_UPDATE = ' '
I_CUSTOMER_IS_CONSUMER = ' '
I_RAISE_NO_BTE = ' '
PI_POSTFLAG = 'X'
PI_CAM_CHANGED = ' '
PI_ADD_ON_DATA =
I_FROM_CUSTOMERMASTER = ' '
IMPORTING
E_KUNNR =
O_KNA1 =
E_SD_CUST_1321_DONE =
TABLES
T_XKNAS =
T_XKNBK =
T_XKNB5 =
T_XKNEX =
T_XKNVA =
T_XKNVD =
T_XKNVI =
T_XKNVK =
T_XKNVL =
T_XKNVP = I_XKNVP
T_XKNZA =
T_YKNAS =
T_YKNBK =
T_YKNB5 =
T_YKNEX =
T_YKNVA =
T_YKNVD =
T_YKNVI =
T_YKNVK =
T_YKNVL =
T_YKNVP = i_yknvp ***
T_YKNZA =
T_UPD_TXT =
EXCEPTIONS
CLIENT_ERROR = 1
KNA1_INCOMPLETE = 2
KNB1_INCOMPLETE = 3
KNB5_INCOMPLETE = 4
KNVV_INCOMPLETE = 5
KUNNR_NOT_UNIQUE = 6
SALES_AREA_NOT_UNIQUE = 7
SALES_AREA_NOT_VALID = 8
INSERT_UPDATE_CONFLICT = 9
NUMBER_ASSIGNMENT_ERROR = 10
NUMBER_NOT_IN_RANGE = 11
NUMBER_RANGE_NOT_EXTERN = 12
NUMBER_RANGE_NOT_INTERN = 13
ACCOUNT_GROUP_NOT_VALID = 14
PARNR_INVALID = 15
BANK_ADDRESS_INVALID = 16
TAX_DATA_NOT_VALID = 17
NO_AUTHORITY = 18
COMPANY_CODE_NOT_UNIQUE = 19
DUNNING_DATA_NOT_VALID = 20
KNB1_REFERENCE_INVALID = 21
CAM_ERROR = 22
OTHERS = 23.
IF sy-subrc eq 0.
Commit work and wait.
Endif.
All above tables have a field called KZ which has options
U-update
D-delete
I-insert
E- (I dont know)
Ex: T_XKNVP structure = KNVP Structure + Field KZ.
Documentation for this FM is not Available in English or German
1. I tried sending Z2 KZ as D first & Z1 with KZ as I with business partner of Z2 (KUNN2)
as single update.
Ex: T_XKNP table
KUNNR PARVW KUNN2 KZ
123 Z2 70007777 D
123 Z1 70007777 I
2. I tried it as a separate delete record and insert record i.e calling the FM twice .
3. I tried passing table T_YKNVP with old partner data + TXKNVP table new partner data
Ex: T_YKNP table
KUNNR PARVW KUNN2 KZ
123 Z2 70007777 U or space (I tried both one after another)
4. All combinations for field KZ are tried.
Please help me to overcome this problem.
I ) I need which parameters are to be passed to FM for updating partner function in KNVP table .
II) Do I need to pass structure I_KNA1 or I_KNVV to FM ? (Blank or with values corresponding to
partner function ).
III) Any sample code which can guide me.
Even a small hint or clue from you will certainly help me.
Thanks in Advance.
AJAXi have the same problem. I need to update the partner function PARVW thru a program that i created. I tried to use this FM but it didn't work. Anyone knows another FM that i can use to update the KNVP table?
-
Recursive query for finding parents and children against two tables
Hi I have two tables where the data is stored hierarchially.
I have found using connect_by, level and other oracle functions doing its job when the data is in one table.
Can I traverse against two tables by using the same oracle functions.
My Table A can go 2 levels deep in my hierarchy and level 3 and so forth has to be done against a different table.
Appreciate your insight..
Thanks in advanceThe number of levels that I can traverse in the first table is dynamic (sometimes 2 levels and sometimes 3 levels and actually no level limit) and then has to dynamically start looking at second table for finding any more levels in the other table.
I was able to implement them seperately and union them.
I was more looking for a comprehensive solution to reduce the number of lines that I have to maintain...
Thanks in advance
Edited by: user566193 on Jan 15, 2010 1:58 PM -
Running Aggregate Functions, Attribute or Measure?
Hi Guys:
I wonder if this is a bug in BIEE 11g? I am using 11.1.1.6.
My requirement is quite simple, I have a measure, and I want to show this measure as a cumulative curve by month. For example, let's suppose there are three columns in Criteria:
Month, Amount, RSUM(Amount)
Then I plot a curve by RSUM(Amount) vs. Month. In BIEE 10, there is no problems. However in 11.1.1.6, I got an error. I look into the table and found that, after using running aggregate functions, like RSUM or MSUM, the column becames Attribute, instead of Measure. In other word, although I can see the RSUM(Amount) column in Criteria page shows a yellow icon, it turns into blue in Results page! Since it becames Attributes in Results page, I cannot drag RSUM(Amount) into Measures area in Line Graph. I can see the correct values in Table view, but got error in Line Graph view.
Why the column properties are different between Criteria and Results? And are there any workaround to plot a cumulative curve? I dont want Parete graph.
Thanks
LarryHi Larry,
I do not think this is any bug in .6 and I just gave a try successfully to confirm that too. My test case follows
1. Created an analysis with Period.Month and Measures.Value
2. Added another measure and changed the formula of Measures.Value as RSUM(Measures.Value) and still see it to be a measure as expected.
3. Navigated to results section and added all kind of graphs to notice that it is behaving as expected.
Can you let us know, what error are you hitting at in the graph?
Thank you,
Dhar -
TCA Java APIs not able to validate input against LOOKUP table
Hi there,
I am using the TCA Java APIs to create new source system references like so:
HzOrigSystemRefPub wrapper = new HzOrigSystemRefPub();
wrapper.createOrigSystemReference(connection, "T", record, x_return_status, x_msg_count, x_msg_data);
The record has the following attributes set:
l_orig_sys_reference_rec.created_by_module := 'TCA_V2_API';
l_orig_sys_reference_rec.owner_table_name := 'HZ_PARTIES';
When I run my java code however, the call returns an error saying that the values I have mentioned in the above two attributes were not in my lookup tables:
1. Value for owner_table_name must be a value defined in lookup type TCA_OWNER_TABLE.
2. Value for created_by_module must be a value defined in lookup type HZ_CREATED_BY_MODULES.
When I run queries directly against the database in SQLDeveloper, I am able to find these values. They do exist.
For some reason, when using the Java API, it cannot find the lookup values.
I even tried calling the PL/SQL API from Java and the same problem exists.
Is this a bug?
Can anyone please help me?
Thanks in advance!OK, solved my own problem.
The solution is to set the language environment variable to 'AMERICAN'.
It's a known bug.
Set it from your Java code like this:
OracleCallableStatement setter =
-------(OracleCallableStatement)connection.prepareCall(
-------"ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'");
setter.execute();
Now any calls after this statement to the Java APIs will work.
Cheers! -
Physical table list against Cluster Table CDPOS and PCDPOS
Hello experts,
For function customized requirement, we need to know the physical table
list against Cluster Table CDPOS and PCDPOS and EDID4, just like
Cluster Table BSEG contain with six physical tables
BSAD/BSID/BSAS/BSIS/BSAK/BSIK. Also we want to know if there is any
general way to find out the physical table list for any cluster table.
My question is:
1. How can I find all the transparent table for Cluster Table CDPOS?
just like Cluster Table BSEG has transparent tables of
BSAD/BSID/BSAS/BSIS/BSAK/BSIK.
2. How can I find all the transparent table for Cluster Table PCDPOS?
3. How can I find all the transparent table for Cluster Table EDID4?
4. Additionally,I want to know if there is any
general way to find out all the transparent tables for an specific
cluster table.
Many thanks.Hello,
simply look in transaction SE11.
Example:
1. SE11 -> Table CDPOS - Display. On Tab 'Delivery and Maintenance' you'll find Pool/Cluster 'CDCLS'.
2. SE11 -> Table CDCLS -> Display. On next screen position on CDCLS-> Where-used-list -> Tables -> you'll find tables CDPOS and PCDPOS.
Same thing with EDID4 -> EDI40 ...
Regards Wolfgang -
Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA
For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians. -
Workbook not refresh after running Planning Function (BI-IP)
Hi! Folks,
I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
Step 1: Run Planning Function (There are some changes in records)
Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
Step 3: The changed records will be shown...
Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
Brgds,
SupasakeHi,
I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
D -
I have an app called Astrogold that crashes when I run one function, but no one else I know with the same app experiences the crash. The app writes several different reports, and gives the option of sending them as PDF files. All the other reports generate fine, but one of them....and that one crashes the app while it is trying to generate the report.
Note: it only crashes the display. If I double click the home button I see the app itself is still running.
I checked my Diagnostics & Usage data, and noticed that every time the app crashes a LowMemory report is created. I looked at the LowMemory report and see that the Largest process is Astrogold. But I don't see any reports with the name of the app itself.
I have an iPhone 5c, and according to iTunes I have 2.25 GB Free.
Below is the actual LowMemory report. Can anyone make any suggestions?
name":"astrogold","bug_type":"109","os_version":"iPhone OS 7.1.2 (11D257)","bundleID":"com.esotech.astrogold","version":"4.2.4 (4.2)","app_name":"astrogold"}
Incident Identifier: 257B47E8-3A4D-4C64-8E9F-71D33C905548
CrashReporter Key: cfa389285f4559a21d797bfeec6a78c584e798d6
Hardware Model: iPhone5,4
Process: astrogold [18906]
Path: /var/mobile/Applications/D8301675-652C-4472-A168-CF3F141C5F58/astrogold.app/ast rogold
Identifier: com.esotech.astrogold
Version: 4.2.4 (4.2)
Code Type: ARM (Native)
Parent Process: launchd [1]
Date/Time: 2014-08-31 13:15:13.616 +0800
OS Version: iOS 7.1.2 (11D257)
Report Version: 104
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Triggered by Thread: 0
Thread 0 Crashed:
0 libsystem_kernel.dylib 0x399a51f0 0x39992000 + 78320
1 libsystem_pthread.dylib 0x39a0d7b2 0x39a0a000 + 14258
2 libsystem_c.dylib 0x39955ff4 0x3990c000 + 303092
3 libsystem_malloc.dylib 0x399ccd20 0x399ca000 + 11552
4 libobjc.A.dylib 0x393f73a4 0x393ed000 + 41892
5 libobjc.A.dylib 0x393ffb66 0x393ed000 + 76646
6 astrogold 0x001be574 0xe2000 + 902516
7 astrogold 0x001be774 0xe2000 + 903028
8 astrogold 0x001a2910 0xe2000 + 788752
9 astrogold 0x001a40fa 0xe2000 + 794874
10 UIKit 0x315ba174 0x3147c000 + 1302900
11 UIKit 0x315613d6 0x3147c000 + 938966
12 UIKit 0x31560c2c 0x3147c000 + 937004
13 UIKit 0x314872e0 0x3147c000 + 45792
14 QuartzCore 0x31103316 0x310f7000 + 49942
15 QuartzCore 0x310feb3a 0x310f7000 + 31546
16 QuartzCore 0x310fe9cc 0x310f7000 + 31180
17 QuartzCore 0x310fe3e0 0x310f7000 + 29664
18 QuartzCore 0x310fe1f2 0x310f7000 + 29170
19 QuartzCore 0x310f7f18 0x310f7000 + 3864
20 CoreFoundation 0x2ec20ff6 0x2eb81000 + 655350
21 CoreFoundation 0x2ec1e982 0x2eb81000 + 645506
22 CoreFoundation 0x2ec1ecce 0x2eb81000 + 646350
23 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
24 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
25 GraphicsServices 0x33af86ce 0x33aef000 + 38606
26 UIKit 0x314ea86c 0x3147c000 + 452716
27 astrogold 0x000e9136 0xe2000 + 28982
28 libdyld.dylib 0x398eeab4 0x398ed000 + 6836
Thread 1:
0 libsystem_kernel.dylib 0x39992804 0x39992000 + 2052
1 libdispatch.dylib 0x398e1050 0x398d9000 + 32848
2 libdispatch.dylib 0x398db2de 0x398d9000 + 8926
Thread 2:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 Foundation 0x2f57d492 0x2f572000 + 46226
7 Foundation 0x2f5ce254 0x2f572000 + 377428
8 astrogold 0x00408f30 0xe2000 + 3305264
9 Foundation 0x2f63fa0a 0x2f572000 + 842250
10 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
11 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
12 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 3 name: com.apple.NSURLConnectionLoader
Thread 3:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 Foundation 0x2f5ca23c 0x2f572000 + 361020
7 Foundation 0x2f63fa0a 0x2f572000 + 842250
8 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
9 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
10 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 4 name: com.apple.CFSocket.private
Thread 4:
0 libsystem_kernel.dylib 0x399a5434 0x39992000 + 78900
1 CoreFoundation 0x2ec244de 0x2eb81000 + 668894
2 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
3 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
4 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 5:
0 libsystem_kernel.dylib 0x399a5c70 0x39992000 + 81008
1 libsystem_pthread.dylib 0x39a0ac1e 0x39a0a000 + 3102
2 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 6:
0 libsystem_platform.dylib 0x39a069a6 0x39a05000 + 6566
1 libobjc.A.dylib 0x393ffad6 0x393ed000 + 76502
2 CoreFoundation 0x2eb86140 0x2eb81000 + 20800
3 CoreFoundation 0x2eb8c0dc 0x2eb81000 + 45276
4 CoreFoundation 0x2eb9f6e4 0x2eb81000 + 124644
5 astrogold 0x0019ed06 0xe2000 + 773382
6 Foundation 0x2f59a64c 0x2f572000 + 165452
7 Foundation 0x2f58a870 0x2f572000 + 100464
8 Foundation 0x2f62e740 0x2f572000 + 771904
9 libdispatch.dylib 0x398de25a 0x398d9000 + 21082
10 libdispatch.dylib 0x398df684 0x398d9000 + 26244
11 libdispatch.dylib 0x398df8d8 0x398d9000 + 26840
12 libsystem_pthread.dylib 0x39a0ac14 0x39a0a000 + 3092
13 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 7:
0 libsystem_kernel.dylib 0x399a5c70 0x39992000 + 81008
1 libsystem_pthread.dylib 0x39a0ac1e 0x39a0a000 + 3102
2 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 8:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2ebcd346 0x2eb81000 + 312134
6 CoreMotion 0x2f2484fc 0x2f20f000 + 234748
7 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
8 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
9 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 9 name: WebThread
Thread 9:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 WebCore 0x36ebfc70 0x36e01000 + 781424
7 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
8 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
9 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 10 name: JavaScriptCore::BlockFree
Thread 10:
0 libsystem_kernel.dylib 0x399a4f2c 0x39992000 + 77612
1 libsystem_pthread.dylib 0x39a0bf62 0x39a0a000 + 8034
2 libsystem_pthread.dylib 0x39a0cd9c 0x39a0a000 + 11676
3 JavaScriptCore 0x2fbb8308 0x2fba6000 + 74504
4 JavaScriptCore 0x2fbb5970 0x2fba6000 + 63856
5 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
6 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
7 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 11 name: JavaScriptCore::Marking
Thread 11:
0 libsystem_kernel.dylib 0x399a4f2c 0x39992000 + 77612
1 libsystem_pthread.dylib 0x39a0bf62 0x39a0a000 + 8034
2 libsystem_pthread.dylib 0x39a0cd9c 0x39a0a000 + 11676
3 JavaScriptCore 0x2fd56cb2 0x2fba6000 + 1772722
4 JavaScriptCore 0x2fd56d0c 0x2fba6000 + 1772812
5 JavaScriptCore 0x2fbb5970 0x2fba6000 + 63856
6 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
7 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
8 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 0 crashed with ARM Thread State (32-bit):
r0: 0x00000000 r1: 0x00000000 r2: 0x00000000 r3: 0x27d1f553
r4: 0x00000006 r5: 0x3b90118c r6: 0x0000000b r7: 0x27d1f5bc
r8: 0x0000000b r9: 0x00000001 r10: 0x00626000 r11: 0x00000000
ip: 0x00000148 sp: 0x27d1f5b0 lr: 0x39a0d7b7 pc: 0x399a51f0
cpsr: 0x00000010
Zane B Stein
("os_version":"iPhone OS 7.1.2 (11D257)","version":"104","bug_type":"198"}
Incident Identifier: 3526E805-4C03-4956-83B6-2A4AB95B9EE4
CrashReporter Key: cfa389285f4559a21d797bfeec6a78c584e798d6
Hardware Model: iPhone5,4
OS Version: iPhone OS 7.1.2 (11D257)
Kernel Version: Darwin Kernel Version 14.0.0: Thu May 15 23:10:37 PDT 2014; root:xnu-2423.10.71~1/RELEASE_ARM_S5L8950X
Date: 2014-09-02 14:24:12 +0800
Time since snapshot: 220 ms
Free pages: 1448
Active pages: 17896
Inactive pages: 9268
Speculative pages: 11
Throttled pages: 209561
Purgeable pages: 261
Wired pages: 21682
File-backed pages: 26187
Anonymous pages: 988
Compressions: 456385
Decompressions: 85356
Compressor Size: 44
Uncompressed Pages in Compressor: 59
Largest process: astrogold
Processes
Name <UUID> rpages recent_max fds [reason] (state)
CloudKeychainPro <b9fbb8e4989732709cb18c481dfa61a9> 108 108 200 (daemon) (idle)
mediaremoted <051ef8b6e7c93fa49a0a2e15ea6e1f52> 193 193 200 (daemon) (idle)
MobileGestaltHel <c3c9c32948fe364f8103dd528164b610> 123 123 200 (daemon) (idle)
DuetLST <89027d811bd73931a4d45f71c9bbebc7> 472 472 200 (daemon) (idle)
itunesstored <00f47fa85c623cee9d55c9b004ba561d> 1426 1426 200 (daemon) (idle)
lsd <8d2569b7b89033328609c73d07410b55> 149 149 200 (daemon) (idle)
sandboxd <712c543459bf3d81b0ec88bba199d802> 96 96 200 (daemon) (idle)
geod <6e5e9ae33f8638b7be848eac2c1ef70b> 166 166 200 (daemon) (idle)
assetsd <6f28405c4c1b35e9aff946c1c4799c0f> 868 868 200 (daemon) (idle)
installd <185a1eaa735b3aa38d98092ba8493ba0> 201 201 200 (daemon) (idle)
securityd <47657a3a48573d6a8e52ef4cc868248c> 617 617 200 (daemon) (idle)
networkd_privile <234d3717143e3bbba12acc5de334deaf> 81 81 200 (daemon) (idle)
accountsd <5a5640b47fe637bebb6254deff26eaee> 438 438 200 (daemon) (idle)
routined <d5590a1879153ed284886271907ea8fa> 344 344 200 (daemon) (idle)
EscrowSecurityAl <d0a689490be631efac2c764fe93300dc> 166 166 200 (daemon)
mstreamd <a2bb6401f1d63c7aa320a817d8839522> 406 406 200 (daemon)
tccd <ad9819a843e93a1680335febb52c7cc3> 227 227 200 (daemon)
kbd <eba296f6bd4938688fa16a5e39fa477c> 2319 2319 200 (daemon)
CVMServer <c95a902a5ae331c2a5239b6cf98a0617> 89 89 200 (daemon)
astrogold <58c53f7c8e8931ec823713195426f59c> 166401 166401 200 [per-process-limit] (frontmost) (resume)
identityservices <d1b907f8a41e3ebd9f270aa846040b07> 581 581 100 (daemon)
wifid <2b4c0ddf1a8439838868bf2be61d8bf1> 1286 1286 25 (daemon)
syslogd <5c06b8eec36032b49cc9421348ba47ea> 132 132 50 (daemon)
locationd <b813efaa4a6a314cafdbbd9b88c30796> 1732 1732 100 (daemon)
powerd <bd077d109d773bcd9041153b30ea034a> 128 129 100 (daemon)
imagent <79bd0fedda583ae3822051093f7681b5> 571 571 100 (daemon)
vmd <f44f0a6a37293606865eb8862c10b653> 188 188 100 (daemon)
iaptransportd <818588012ed93eb7a10ccb22d8acadfe> 223 223 50 (daemon)
mediaserverd <e40c7476d9fe3d759bfd28b8d68dc7ba> 2233 2233 200 (daemon)
mDNSResponder <60e905f9582a3090ab6e7a257454389e> 226 226 100 (daemon)
apsd <b7e19d27180e34aba845e475eae7d3db> 510 510 100 (daemon)
dataaccessd <fdf81960fb903bd68616117fd29ce277> 2563 2563 200 (daemon)
sharingd <2c731a1c182637a39b004694b2a5e23d> 508 508 50 (daemon)
mobileassetd <08440fa17b3537afb347cf78aa039a67> 565 565 200 (daemon)
SpringBoard <f73e83ffc898302394baa2042ca232fd> 9211 9211 100
backboardd <b5d33ca6da9c33d48e2c8ccb9930c3dc> 8716 8716 50 (daemon)
aggregated <3e381378eb7f3dd2846920cb5db91265> 523 523 50 (daemon)
lockdownd <d998e2bac7663966bd0285c07ed89111> 276 276 100 (daemon)
configd <20b29bb0286e347ebe7c42aa8ee421c9> 462 462 100 (daemon)
fseventsd <8876b6f5a0c13024a12cb3e148ddab61> 303 303 100 (daemon)
fairplayd.H2 <243ccf92ad4d34cbb4fdf7e078d55141> 130 130 100 (daemon)
wirelessproxd <47699be4861c30abbb375e1d3b9e15dc> 153 153 100 (daemon)
BTServer <51d0d4421dc73abf9d4844e2b155c340> 536 536 100 (daemon)
distnoted <7895f761ec323e31a356860060f8713d> 155 155 100 (daemon)
UserEventAgent <9aedc371d1c037e7b5d7b5577f0424a8> 756 756 100 (daemon)
WirelessCoexMana <f5dcce7805a9308bbbcf2d52751385ef> 132 132 100 (daemon)
networkd <148d4512d2c43efc95bafd487fd97f4a> 577 577 100 (daemon)
filecoordination <7b1b1b1b4fe0364c8e0adfd90f78b4a9> 207 207 200 (daemon)
medialibraryd <fdf252b3fb1a3646a836c0c3b5840464> 634 634 200 (daemon)
touchsetupd <0a4f35337aa13e55a3d7e56296499e14> 154 154 200 (daemon)
ubd <30a03e11a5c43c7cbd6ecd1aaef27841> 470 470 200 (daemon)
CommCenter <463e099ed64e30ad9433b8ea3f4a4e94> 2039 2039 100 (daemon)
notifyd <5b4c0731afd533179b295e4f39e589d6> 335 335 100 (daemon)
**End**
<Post Edited By Host>Thank you for your reply.
>You can double-click the home button and then swipe upwards on the thumbnail of the app to force it closed.
Did that
>After that, power the phone off and back on again, test.
Did that
>If still a problem, force close the app again and then reset the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot, test.
Did that
>If still a problem, then connect the device to iTunes and restore from backup.
Did that
>If that does not work, it is possible there is something corrupt in the backup. The final step is restore as new, not from a backup.
This is the only thing I had not done before I posted my initial request for help. I will work on that....it's a last resort I was hoping not to do, but it sounds like I've already done everything else.
Thank you. -
Error while running IP function on BEx
Hello Experts,
I was trying to run Planning Function "Revaluation" from BEx work book with using BEx formula variable.
But I have get below error message:
*"An error occurred while communicating with the BI server"*
*"As a result of this error, the system has been disconnected from the BI server."*
*"Exception condition "INPUT_NOT_LEGAL" raised. "
My other functions and FOX are successfully running from BEx. And this specific revaluation function also runs on RSPLAN environment when I try to test under planning Sequence.
If any one has any idea about this error. I will be glad to get his/her opinion.
Thanks,
AliHello Experts,
I was trying to run Planning Function "Revaluation" from BEx work book with using BEx formula variable.
But I have get below error message:
*"An error occurred while communicating with the BI server"*
*"As a result of this error, the system has been disconnected from the BI server."*
*"Exception condition "INPUT_NOT_LEGAL" raised. "
My other functions and FOX are successfully running from BEx. And this specific revaluation function also runs on RSPLAN environment when I try to test under planning Sequence.
If any one has any idea about this error. I will be glad to get his/her opinion.
Thanks,
Ali
Maybe you are looking for
-
I tried updating to iOS 5 and now my computer doesn't recognize my iPhone 4.
When I plug the phone in, my computer doesn't even see that there is something in the USB port. I know the port/cord are ok because I just synced last night (still using the old OS). Now my iPhone screen recognizes that it's plugged in but it shows
-
i have not used my PalmVx in a few years; however, the database on my Laptop, Inspiron 2650, continued to work until recently. Now it reads: 'the selected port com4 is not available at this time' and ''Error:Failed to open address book' Does a
-
Reinstall lion due to missing recovery partition?
Dear Apple Community, Here is my situation: I have a 3-partioned drive inside my iMac. One has Lion installed, one has SL, and another is an empty partion. Unfortunatly, there is no recovery partition installed on my computer. While I am fully aware
-
JTextField.setDocument(null) in 1.3 and 1.4
Hi We are upgrading to Java 1.4 from 1.3. The method JTextField.setDocument(doc) works fine in 1.3 when 'doc' is null. But in 1.4, it throws null pointer exception. I am not using JTextField directly, I am using a derived class of JTextField. 'doc' i
-
I have updated to Tiger and some of my photos are distorted. The photo is an old version that came on my computer 1.1.1 Can you help me out with this product.? Do I need to upgrade? What are chances of loosing all my pictures? Is there any other thin