Running FMS on Virtual Server

Hi,
I'm trying to run FMS 2.0.4 on Centos 4.3 on a VPS. It can
install fine, contrary to many CentOS users I read about on the
forum. However, when I start it, I seem to lose all connectivity
whatsoever. Very weird. I have tried countless tcpdumps and lsof
and netstat and after days of debugging I still cannot find the
problem.
I am wondering if someone else has experienced the same
problem as me, and what did you do to fix it.
Thank you anyone :))

IF you want to run the Forms from the IDS, installed on the Developer's PC, then you use the default OC4J that comes with it.
On the developer's PC, you can go to the $ORACLE_HOME/install/portslist.ini to check which port number your HTTP server is.
In the Forms runtime preferences you use http://localhost:{port number}/forms/frmservlet
On the developer's PC you then run "Start OC4J" to start the HTTP server, once the server is started then you try again running your Form from the builder.
Don't confuse Application Server with IDS which has its own OC4J, the first one runs on the server and the latter on a developer's PC.
Why don't you want developers to use their own OC4J?
Edited by: Rodolfo Ferrari on Jun 22, 2009 4:01 PM

Similar Messages

Distiller 8 Server issue on a Virtual Server

We had distiller Server V8 running on a windows 2003 3 server and had no known problems. We had that server virtualized and we are beginning to see an issue and wonder if it is related. We have multiple watched folders receiving .ps files from two different sources. We are seeing files from one one "in" source being distilled into the "out" folder of the other source, renamed the name of one of the files that should be in the other source.
To explain..file named "a1.ps" from source "a", place in the "a" in folder is being renamed file "B1" and showing up in the "B" out folder.
Is there an issue with Distiller Server 8 running on a Virtualized Server?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

ACS on virtual server

Hello,
I want to install ACS 4.2 on Microsoft Windows 2003 inside Microsoft Virtual Server.
Is see that VMWare ESX is supported by Cisco. But no answer about VirtualServer.
Is anyone have idee about the Cisco support with Microsoft Virtal Server host ?

Officially ACS is not tested and also not supported when running on Microsoft Virtual Server 2005.
ACS 4.1 is tested and supported when running under VMWare ESX 3.0.0.
But in couple of instance I have seen it working fine. So if you run into any issue TAC would not support.
Regards,
~JG
Do rate helpful posts

Vs2005 crsytal reports 10 not working propery in 2003 virtual server

I have a production application using asp.net version 2 and crystal reports 10. The system worked fine for a long time until they changed over from a sever running windows 2003 to a virtual windows server 2003 runing on a different machine. nothing has been changed other than the system now runs on a virtual server. My proble is that the crystal report viewer is now postioned about halway from its border ( vertically and it seems to render other buttons ( ie not crsytal reports controls but asp.net standard controls) in operable. It would appear as if the postback has not worked properly for some of the asp.net comtrol buttons.
This has worked fine for one year until they put the whole system on a virtual server. ANy help would be appreciated

Using a utility such as [Fiddler|http://www.fiddlertool.com/fiddler/] or [Charles|http://www.charlesproxy.com/] may help you in determining what is happening. [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] may also help, but I'd go for Fiddler or Charles first.
Ludek

Virtual Server Logging Problem

I'm currently using Sun Application Server 9. I've created a virtual server together with a new listener on a port 8081. I have two problems here:
1) The website on the virtual server runs fine. And I've coded System.out.println on several servlets for assisting purposes. My problem is that, i can't see those message printed on the server.log by System.out.println.
2) The same copy of WAR file has been deployed to the virtual server which it's able to perform JDBC functions in default server. Thing turns funny when the same WAR file that runs on the virtual server is unable to perform the JDBC functions.
Can't figure out why. Please help me.
Thanks!

There are two kinds of virutal servers - IP/Socket/Port based, and URLHost based.
You created a IP/Socket/Port based virtual server. Instead, you should look for the URLHost fiend in the virtual server pages and change it to reflect the correct DNS name it should respond to. Make sure this VS (and the default) are both attached to the port 80 listen socket.

Getting Virtual Server ID within OS running on guest VM

Hi,
If I login to OVM Manager and look at the info that is shown for a Virtual Server (under the info tab), there is a ID field.
I want to get this ID from within the OS running on one of the guest VMs. Could you let me know how can this be done? Which command can I use?
Regards,
Vinay

I have never installed the EM agent on Dom0. I always taken the approah of install in the EM agent on the guest and then attaching the VM Manager to EM. Thus, you get the performance stats of the guest themselves and the performance stats of the VM Servers themselves. I know it works. I'm doing it now. I do have collect issues from time to time and its more prevalent on some hardware than it is others.

The server is running low on virtual memory.

When running a sheet in discoverer I am getting the following error after around 10 mins
The server is running low on virtual memory. This can happen due to insufficient disk space or heap space on the server. Please contact your Discoverer Administrator for assistance.
I have changed the following settings to
maxvirtualdiskmem = 4096000000
maxvirtualheapmem = 4096000000
The query returns 625500 records with parameters selected
and 834360 records without any parameters set
Can anyone help

Memory usage is going to depend on several things. While rows returned is part of it, other things like sorts, calculations, page items and report type can have a huge impact. Out of curiosity, is the report a crosstab? are there a lot of sorts, of some complex calculations?
How many users are accessing Disco at the same time, and is there anything else on the same box as Disco?
Also, after you changed the settings (and I am assuming the change was made to pref.txt), did you run applypreferences.sh and then bounce the app server? If not, the changes have not taken place.

SBO running on virtual server

Hi All
One of our clients is implementing virtual server , currently they are running on a x86 2003 OS machine.
Here is the question.
I am virtualizing 3 new servers, one for SAP, one for CRM and one that will be my SQL processing machine. My question goes as follows: our SAP is currently running on 32-bit SQL 2005, would I still need to keep the SQL version as 2005, or would we easily be able to move it to SQL 2008 64-bit (bearing in mind that my virtual SQL machine is Windows Server 2008 64-bit)?
Regards
Bongani

Thanks Gordon
PLease check this link as well.
Error connecting to the license server.

Hyper-V Question -- Running Hyper-V or VMWare on a Windows Virtual Server

So my research tells me there likely is not a way to do this, but I think someone must have run into it before or there has been a previous need.
We have recently had two Windows Server 2012 R2 Standard virtual machines created for our use in our data center. We are using them to run a series of web scanning and monitoring tools. We want to run these tools within various Windows OS environments
with different combinations of browsers/applications/etc, making VMs the obvious way to go (preferably multiple VMs per virtual server). I don't know much about the virtual data center here, but when I try to enable Hyper-V, the system tells me it is
running and cannot run within itself. Likewise, if I try to install VMWare, it tells me it is not compatible with Hyper-V.
This may be akin to asking for Inception, but is there a way around it? Does anyone know of a way to run a VM inside a virtual server, or does anyone see an alternate solution? So far the only one I've come up with is to requisition physical
servers, install Windows Server 2012 on each, and then use a single level of either Hyper-V or VMWare to create the virtual machines we need.
Any information is greatly appreciated.

I think you might be missing something here.
You have Server Standard installed on the Bare metal. Then you add the Hyper-V Role. Then you open the Hyper-V Management Console and you begin creating VMs.
You do not add the Hyper-V Role within a virtual machine (VM).
The same process goes for VMware (ESX) - You install ESX on the bare metal, then you open the manager and you create VMs.
Now, if all you have are two VMs (which your first statement sounds like) you cannot enable Hyper-V in the VMs and then run nested VMs in that VM. This just does not work today.
XenServer can do this in a real way, but only with x86 paravirtualized Linux machines. And ESX can do this with some very specific emulation settings - and at that your eyes probably just glazed over.
To do this right, you need the physical machines.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Running OEID on a virtual server

Hi,
Has anyone tried running OEID on a virtual server?
If so, could you let me know what your experience was like?
We are in the middle of changing over to new servers and was wondering what the feasibility of using virtual servers were.
Thanks,
Will

Whilst not directly answering your question, I wanted to make sure that you are aware of Endeca Information Discovery VM appliance http://www.oracle.com/technetwork/middleware/endeca/downloads/eid-vm-1968135.html .
It's an all-in-one image for testing-purposed only and not for production, but it may help you with your evaluation.

Can I use the search engine and run a web application under the same iPlanet 6.0 virtual server?

I've got an iPlanet 6.0 SP2 virtual server with the search engine enabled, which was tested and working. I then deployed a web application to it (mapped to "/"), and the web application works fine but now the search functionality is completely broken. Browsing to /search results in a directory index being displayed. Is there some trick to getting the two working together? I tried shuffling NameTrans directives around, but can only get either the search or the web app working, not both.

Ok, I'm going to answer my own question now...
The issue has been resolved after some additional experimentation on my part. There were two causes for my problem:
1. The NameTrans directives in obj.conf are in the wrong order when Java and Search are enabled from the administration interface.
Here's the admin server generated obj.conf I started with initially, when the web application was working, but requests to the URI "/search" returning a 404 error:
<Object name="default">
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
NameTrans fn="es-search-nametrans" from="/search"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="document-root" root="$docroot"
</Object>
Here's my obj.conf now, which works perfectly:
<Object name="default">
NameTrans fn="pfx2dir" from="/search-ui" dir="/usr/local/iWS-6.0/plugins/search/ui" name="es-internal"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/usr/local/iWS-6.0/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/local/iWS-6.0/manual/https" name="es-internal"
NameTrans fn="es-search-nametrans" from="/search"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="document-root" root="$docroot"
</Object>
The "servlet" NameTrans directive needs to go below all others which map a URI to a function or directory (but before "document-root"), or they break. This is consistent with the iPlanet documentation on NameTrans, but the admin server doesn't get it right!
2. The developer who wrote the web application uploaded a directory named "search" in the root of his application, which caused the server to display a directory index of "/search", instead of executing the search function. I believe this issue is covered in an iPlanet knowledge base article.

How to restart a virtual server in WS7

Does anybody know host restart a virtual server without restarting the whole instance?
Thanks.

you can run 'bin/reconfig' - this will make any changes (that does not require a restart) available to the running server (this includes all virtual servers configured within this server instance) without requiring a restart - i mean without any downtime
no, there is no way to make dynamic reconfig work only for a single virtual server. but i guess, what you care most is - ability to modify a setting for a virtual server without disturbing other virtual servers - 'bin/reconfig' is probably what u r looking for.

The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.

I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)

Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA)

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

Need help in creating virtual server

Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ram

Hi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram

Running FMS on Virtual Server

Similar Messages

Maybe you are looking for