Running Multiple queries in Oracle 10g Express Edition! Help Me!
I am new to Oracle 10g Express Edition.
I used my browser to navigated to http://127.0.0.1:8080/apex
I saw the database page.. logged in.. went into the SQL section.. now am not able to run two or more queries at the same time.. i have given a screenshot too. Plz.. check it and reply me quickly..
http://i71.photobucket.com/albums/i149/prasanna7287/546895215.jpg
Help me plz..
Prasanna.
There are two possibilities:
1) Run the SQL commands, one command at a time;
2) Create a script of multiple commands, and run the script.
These are discussed in some detail in the online documentation at http://www.oracle.com/pls/xe102/homepage
In particular, look at
http://download-east.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25108/xedev_sql.htm#BJEIEIFJ
Message was edited by:
Hans Forbrich
No ... wait ... please do not read the documentation! <g>
Similar Messages
-
Installing and Running Oracle 10g Express Edition on Microsoft Vista
My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg -
Silent Installation Of Oracle 10g Expression Edition
Plz i need information about how to install Oracle 10g Expression Edition silently on multiple computer.....i get this script from Oracle site:
** Response file to perform silent install of Oracle Database 10g Express Edition **
** Values for the following variables are configurable: **
** szDir - Provide a valid path **
** TNSPort - Provide any valid available port number **
** MTSPort - Provide any valid available port number **
** HTTPPort - Provide any valid available port number **
** SYSPassword - Provide a valid password string **
** bOpt1 - 1 or 0 : 1 launches the Database Homepage at end of install and 0 doesn't **
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0
Count=9
Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0
Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0]
szDir=d:\oraclexe\TEST
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013]
TNSPort=1521
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012]
MTSPort=2030
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014]
HTTPPort=8080
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011]
SYSPassword=oracle
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
Result=1
bOpt1=1
bOpt2=0
but i need how to link this script into the Setup file.
i urgently need ur help bro.................. let me know if u have some idea to fix this problem.
thz for advance.It is important to define which OS you are working with.
Making a blind guess I will assume your are working on a windows environment (after this file fragment: "Dir=d:\oraclexe\TEST")
In order to perform a silent install on a windows environment you should:
- download the appropriate installation executable - eg. OracleXE.exe
- download one of the silent install response file templates
- edit the template with appropriate values for the install questions
- run the Oracle XE installation and specify the location of the edited response file using a command similar to the following: OracleXE.exe /s /f1"<location of edited response file> /f2"<location of silent install log>
~ Madrid -
How can i create a new database instance in oracle 10g express edition?
hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
ChaitanyaChaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.) -
Can't uninstall or reinstall oracle 10g express edition in w/server 2003
Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
ThanksHi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM -
Oracle 10G EXPRESS EDITION suitable for windows7
hi to all
can u guys plz provide me the oracle 10g express edition download link for windows7
i had already downloaded one for windows7 but when i go to instal it i cant able to run it, and that to the downlOaded file says THE PUBLISHER OF THIS PROGRAM COULDN'T BE VERIFIED.
SO CAN U PLZ PROVIDE ME LINK ASAP.
THANKS IN ADVACE.yaa.i downloaded the oracleXEUNIV FILE.
but the file dont have the .exe extension,and i cant able to run it.
after i run the file
the system says
DO U WANT TO OPEN THE FILE
i click on OPEN
THEN is shows OPEN WITH INTERNET EXPLORER,ADOBE.........
CAN U PLZ LET ME HOW TO INSATLL IT.. -
Oracle 10g Express Edition Beta 3 ODBC Driver Always Crashes
I find that if you set up an ODBC Data Source for Oracle 10g Express Edition on Windows XP SP2 using the "Oracle in XE" driver, anything that tries to access it will crash, even the Windows ODBC Data Source Administratior if you click the "Test Connection" button.
Having clicked the button, you get a window coming up entitled "Oracle ODBC Driver" with a yellow exclamation mark in it, with no other text in the window except for an OK button.
If you press OK, then it crashes and goes through the "Please tell Microsoft about this problem" process....Hi,
Thanks for your comment, but I can't get onto the XE forum.
I found http://www.oracle.com/technology/products/database/xe/forum.html which says:
Forum registration is possible only by downloading and installing Oracle Database XE. After installation, click on the "Registration" link from the Database homepage.
However I find that the "Database Homepage" does not exist.
Choosing the Oracle XE "Go To Database Home Page" takes my browser to http://127.0.0.1:8080/apex which is not available even though my oracle server is running and sqlplus can talk to it.
There's definitely nothing serving on tcp port 8080, as follows:
[dcampbel@clevo]~> telnet localhost 8080
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
Regards,
-- Dave -
Oracle 10g express edition installation file corrupt?
Hi
I have now tried at least 5 times. I downloaded the beta Windows version of Oracle 10g express edition. The download is successful each time but every time I try to run the installer, it says "Error in installation file". Anybody else facing this problem?Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon -
Oracle 10g express edition ..ampersand substitution variable
when i enter the ampersand substitution variable and run the script in the oracle 10g express edition it is giving me the error of (ORA-01008: not all variables bound)...can someone please indicate what the problem is..
thank youi am running the script in the browser but when i run it it does not give me the possibility to enter the value and that error which i mentioned before comes instantly
reuben -
Oracle 10g express edition browser login problem
Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil -
How get scott user database schema in oracle 10g express edition
hi
plz any on can tell me how to get the scott user database table details into the oracle 10g express edition
Iam created the user as scott but but i didn't get the table details
...plz give me the details correctly.You will go into this path C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. You can get scott.sql script yhen you need to run the script like @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. Otherwise you just copy the below script and save it into one file then run that file using @
Rem Copyright (c) 1990 by Oracle Corporation
Rem NAME
REM UTLSAMPL.SQL
Rem FUNCTION
Rem NOTES
Rem MODIFIED
Rem gdudey 06/28/95 - Modified for desktop seed database
Rem glumpkin 10/21/92 - Renamed from SQLBLD.SQL
Rem blinden 07/27/92 - Added primary and foreign keys to EMP and DEPT
Rem rlim 04/29/91 - change char to varchar2
Rem mmoore 04/08/91 - use unlimited tablespace priv
Rem pritto 04/04/91 - change SYSDATE to 13-JUL-87
Rem Mendels 12/07/90 - bug 30123;add to_date calls so language independent
Rem
rem
rem $Header: utlsampl.sql 7020100.1 94/09/23 22:14:24 cli Generic<base> $ sqlbld.sql
rem
SET TERMOUT OFF
SET ECHO OFF
rem CONGDON Invoked in RDBMS at build time. 29-DEC-1988
rem OATES: Created: 16-Feb-83
GRANT CONNECT,RESOURCE,UNLIMITED TABLESPACE TO SCOTT IDENTIFIED BY TIGER;
ALTER USER SCOTT DEFAULT TABLESPACE USERS;
ALTER USER SCOTT TEMPORARY TABLESPACE TEMP;
CONNECT SCOTT/TIGER
DROP TABLE DEPT;
CREATE TABLE DEPT
(DEPTNO NUMBER(2) CONSTRAINT PK_DEPT PRIMARY KEY,
DNAME VARCHAR2(14) ,
LOC VARCHAR2(13) ) ;
DROP TABLE EMP;
CREATE TABLE EMP
(EMPNO NUMBER(4) CONSTRAINT PK_EMP PRIMARY KEY,
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7,2),
COMM NUMBER(7,2),
DEPTNO NUMBER(2) CONSTRAINT FK_DEPTNO REFERENCES DEPT);
INSERT INTO DEPT VALUES
(10,'ACCOUNTING','NEW YORK');
INSERT INTO DEPT VALUES (20,'RESEARCH','DALLAS');
INSERT INTO DEPT VALUES
(30,'SALES','CHICAGO');
INSERT INTO DEPT VALUES
(40,'OPERATIONS','BOSTON');
INSERT INTO EMP VALUES
(7369,'SMITH','CLERK',7902,to_date('17-12-1980','dd-mm-yyyy'),800,NULL,20);
INSERT INTO EMP VALUES
(7499,'ALLEN','SALESMAN',7698,to_date('20-2-1981','dd-mm-yyyy'),1600,300,30);
INSERT INTO EMP VALUES
(7521,'WARD','SALESMAN',7698,to_date('22-2-1981','dd-mm-yyyy'),1250,500,30);
INSERT INTO EMP VALUES
(7566,'JONES','MANAGER',7839,to_date('2-4-1981','dd-mm-yyyy'),2975,NULL,20);
INSERT INTO EMP VALUES
(7654,'MARTIN','SALESMAN',7698,to_date('28-9-1981','dd-mm-yyyy'),1250,1400,30);
INSERT INTO EMP VALUES
(7698,'BLAKE','MANAGER',7839,to_date('1-5-1981','dd-mm-yyyy'),2850,NULL,30);
INSERT INTO EMP VALUES
(7782,'CLARK','MANAGER',7839,to_date('9-6-1981','dd-mm-yyyy'),2450,NULL,10);
INSERT INTO EMP VALUES
(7788,'SCOTT','ANALYST',7566,to_date('13-JUL-87')-85,3000,NULL,20);
INSERT INTO EMP VALUES
(7839,'KING','PRESIDENT',NULL,to_date('17-11-1981','dd-mm-yyyy'),5000,NULL,10);
INSERT INTO EMP VALUES
(7844,'TURNER','SALESMAN',7698,to_date('8-9-1981','dd-mm-yyyy'),1500,0,30);
INSERT INTO EMP VALUES
(7876,'ADAMS','CLERK',7788,to_date('13-JUL-87')-51,1100,NULL,20);
INSERT INTO EMP VALUES
(7900,'JAMES','CLERK',7698,to_date('3-12-1981','dd-mm-yyyy'),950,NULL,30);
INSERT INTO EMP VALUES
(7902,'FORD','ANALYST',7566,to_date('3-12-1981','dd-mm-yyyy'),3000,NULL,20);
INSERT INTO EMP VALUES
(7934,'MILLER','CLERK',7782,to_date('23-1-1982','dd-mm-yyyy'),1300,NULL,10);
DROP TABLE BONUS;
CREATE TABLE BONUS
ENAME VARCHAR2(10) ,
JOB VARCHAR2(9) ,
SAL NUMBER,
COMM NUMBER
DROP TABLE SALGRADE;
CREATE TABLE SALGRADE
( GRADE NUMBER,
LOSAL NUMBER,
HISAL NUMBER );
INSERT INTO SALGRADE VALUES (1,700,1200);
INSERT INTO SALGRADE VALUES (2,1201,1400);
INSERT INTO SALGRADE VALUES (3,1401,2000);
INSERT INTO SALGRADE VALUES (4,2001,3000);
INSERT INTO SALGRADE VALUES (5,3001,9999);
COMMIT;
SET TERMOUT ON
SET ECHO ON -
Uploading photo in oracle 10g express edition
Hi,
I want to upload photo in my database running on oracle 10g express edition.This process must handle simultaneous uploading and with minimum error. Problem is the site is online and anyone can upload garbage,etc.so i am planning to collect images through email and then photo would be uploaded by some data entry operator. please suggest me some process
Thanks878927 wrote:
How can use these loader tools? and what will be the advantage by going through these tools?please explain.Another Condition is i have to scan the photos before uploading it to databaseThere are instructions on how to use SQL*LOADER in the on-line documentation. I meant to say that you have to decide the best way to load the data. I just listed some examples on possible ways it can be done.
Apex is a database application that can be used to generate web pages based on database tables. It can also load files from clients. You can read about Apex in the Apex forums here on OTN or in the on-linedocumentation -
Oracle 10g Express Edition Too Big
Why does Oracle 10g Express Edition require 1.5GB?
I've noticed it comes with a lot of stuff that I do not need. All I want is the database. I don't need a web server or any other stuff. I already have Apache running on Linux.
Second, why can't Oracle include the library libaio when installing on Linux? Every distribution I tried does not install this library by default.
Moreover, I don't think the Exress Edition is so Express. Is there any plans to trim it?Why does Oracle 10g Express Edition require 1.5GB?It needs 383M for the software and config files.
After that, it's database size, including the 'master catalog'.
>
I've noticed it comes with a lot of stuff that I do
not need. All I want is the database. I don't need
a web server or any other stuff. I already have
Apache running on Linux. So don't use it. Feel free to ignore the stuff it includes. Also feel free to duplicate what it does.
A lot of developers would prefer to roll their own than use someone else's code. Something about pride, or not understanding, or not being able/wiling to read docco, or job security, or ...
However, surprisingly enough ... it's not all about you. <g>
>
Second, why can't Oracle include the library libaio
when installing on Linux? Every distribution I tried
does not install this library by default.
Because there is no guarantee that the prerequisites are in place.
Because installing libaio is a SA decision which may have an impact on the operation of the system.
And because auto-installing such a library can make other problems happen.
Moreover, I don't think the Exress Edition is so
Express. Is there any plans to trim it?Compared to the Enterprise Edition, it is pretty trim.
Perhaps you are attempting to use the wrong product. -
An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit
Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PMHi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath -
Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3
I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum MismatchThe steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?
Maybe you are looking for
-
HOw Can I remove faces from the URL
I know that it's in the web.xml file but as soon as i remove the faces part from the file nothing works. Someone please tell me how to properly remove "faces" from the url. Example http:.//localhost:8080/croot/Page1.jsp Thanks in advance
-
Problem in using AdvanceDataGrid as tree with drag n drop functionality
Hi All, I am using AdvancedDataGrid as tree for displaying my data. Within this ADG tree I have to enable drag n drop i.e. user can select one node and will able to drop that on another node within tree. Overwritten dragDrop handler event for ADG. Is
-
Urgent: JAAS Login Module Deployment Problem
Hi, I have developed a JAAS Login module for the portal (EP6 SP9 sneak preview) and i am getting the following error: GroupAssignmentLoginModuleLibrary does not exist in LoadContextWrapper.modifyName. com.sap.engine.services.security.exceptions.BaseS
-
Data Types for RadioButtons and PushButtons
Is there a data type for representing radioButtons and pushButtons in the Oracle tables? If not, what is the alternative to using these controls? null
-
I bought something and I can't put it on my ipod!
Ok, my aunt came over the other weekend and she logged into her account using my computer. I used a itunes gift card to get some songs and acidentally added the 15 dollars to her account. I figured no big deal So I went ahead and bought some music an