Running OEM Web Server on Red Hat AS

First of all, is such a thing even possible? I have seen conflicting reports that yes, you can run the console from a Unix/Linux environment if you have a Netscape browser, and no, you can't actually RUN the Web Browser from Linux (that only Win environments were supported).
So who is right? I know that the oem_webstage directory exists, and can rig it so that the emwebsite.html page shows up (essentially by putting all the forms in the htdocs folder), but I don't see any other way to configure it. I can also find no documentation on this on the web. Can anyone who has had experience with this tell me conclusively one way or another?
I am trying to run Netscape 7.1 on a Red Hat AS system, Oracle 9i. I want to be able to run OEM through the web browser. Sounds simple, but I have hit too many roadblocks.
Thanks in advance!!
--Jim

Yes. We do it here. You need a DB for the OEM repository, probably in it's own instance.
The standalone OEM and webserver ones are almost identical, but there's a few minor differences. (For example, standalone will allow you to add more than 1 DB with the same instance name, but webserver will not).

Similar Messages

Trying to run Microsoft Web Server 2008

I have a computer running Microsoft Web Server 2008 and cannot login from the Internet.
Everytime I try I keep getting the Actiontes Control Panel.
I am using the WAN IP address, and DHCP and have tried Port Forwarding via Actiontec Control Panel.
I am new at this and trying to set up an ecommerce site to sell my Daughter's Homemade Jewelery.
Help, I don't know where to turn to next. I also signed up with ZoneEdit.com for Domain Name Service.

You have to set a static ip for your server and port forward to it. Then you use your wan ip with port numer on the end. 000.000.000:80 You shouldn't be seeing your router unless you have remote login turned on or are in DMZ mode.
If you have residential service you are not aloud to run a server on it. It is in the TOS.

So, noone at all is running SJS Web Server on Solaris 10 Update 6??

Trying to get some feedback on running SJS Web Server under Solaris 10 Update 6.
problems?
"Boy, That was a Mistake"
"Works Great"
"No Problems"
What?? Anything at all...
Thanks

Never mind.
It is a known bug documented on manual " [Solaris 10 10/08 Release Notes, Chapter 2 Solaris Runtime Issues|http://docs.sun.com/app/docs/doc/820-5245/chapter2-1000?a=view] " as shown below.
The solution is to apply vold patch [138130-01|http://sunsolve.sun.com/search/document.do?assetkey=1-21-138130-01-1].
Solaris 10 10/08 DVD Media Might Not be Automatically Mounted by vold (6712352)
The Solaris 10 10/08 DVD does not mount by default during runtime. No error message is displayed.
Workaround: Perform the following steps:
   1. Become superuser.
   2. Disable vold:
      * On Solaris 10 Systems:
            # svcadm disable -t volfs
      * On Solaris 8 and Solaris 9 systems:
            /etc/init.d/volmgt stop
   3. Mount the media manually by using the # mount -F hsfs path to block device path to mount point command. For example:
      # mount -F hsfs /dev/rdsk/c0t2d0s2 /mnt

Anybody have tried to install 10g Application Server in Red Hat 9 ?

I have tried to install 10G Application Server in RED HAT 9, but it say that it need some rpm, I have install 10G Database and it work fine, bo 10As dont let me.
Â¿Anybody can help me?
Thanks in Advanced.

We have applied Patch# p4505133_10105_LINUX.zip for this. Check 390623.1 out.

SpotifyWebHelper.exe - why is it running a web server on my computer?

I do not want or need this, I especially don't want Spotify to run a web server on my computer when Spotify isn't even running, or for it to come up on start up even when I tell it not to. Spotify - could you please finally answer us? Why do you find it necessary to do this? It's sketchy at best.

Thanks, but what if we don't want that functionality? I don't want Spotify running a webserver on my computer that I can't turn off in any way other than manually closing the process. The fact that it constantly adds itself back to startup even when I tell Spotify to not come up on startup is also really bad.
I can't imagine I'm in the minority here. How many people, once they realize this is being done even when they tell Spotify not to, would continue paying for it?

Can Java create HTML tables without running a web server?

Hello,
I would like to know if Java can output data into a simple HTML-like table without having to run a web server or jsp etc.
I want my program to access a database and print records in HTML-like table cells.
It is actually for an events calendar program, where each event would be printed in a cell (date). There would be a variable number of events per cell (date), with each one being editable.
I have seen various "web" calendars like this but I want to make it a desktop application so that it is not dependant on the functioning (or non-functioning!) of a web server.
Can Java do this? I would settle for any type of prewritten table creator (not necessarily HTML) but I do not want Excel type tables or a table where entries must be GUI buttons, such as in Outlook.
Thank you very much for any idea you may have,
Cat

Thank you for the replies :)
I found something with Jeditorpane (JTextComponent and HTML Text Display) at
http://msp-of.de/oreilly/books/javaenterprise/jfc/ch03_21.htm
which looks like what I want. It allows hyperlinks within the table cells and I'm not sure if JTable allows for that. Also, I will want multiple lines and even images (eg moon phases for the calendar) in each cell. I ran the example above and it works great. And yes, it makes use of the HyperlinkListener.
I don't want to create an HTML file for those who suggested that. I just want the flexibility of HTML formatting withing my standalone Java application.
I am still not sure why everyone is suggesting JTable though :) So I will look at it some more. The link above also has a turorial on JTable and does say its faster that JEditor pane because it doesn't have to do any HTML rendering. But it doesn't look to me like it can really ever look like a calendar.....
Thank you again! Being a total Java novice, I am very impressed with how easy JEditorpane is.
Cat

Flash Media Server for Red Hat EL 6

I have tried installinf FMS 4.0.2 on RHEL/CentOS 6 with no luck.
The installer complains about missing libcap. When I supress the check the installer warns about installation on an unsupported O/S.
Unfortunately, I can't it to work on CentOS 5. The log says:
2011-07-17      00:39:40        23795   (i)2571011      Server starting...      -
2011-07-17      00:39:40        23795   (i)2581224      Edge (23818) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".        -
2011-07-17      00:39:40        23795   (i)2571111      Server started (/opt/adobe/fms/conf/Server.xml).        -
2011-07-17      00:39:45        23795   (i)2581226      Edge (23818) is no longer active.       -
2011-07-17      00:39:45        23795   (w)2581255      Edge (23818) _defaultRoot__edge1 experienced 1 failure[s]!      -
Followed by many more edge failures.
Meanwhile the CentOS 5 installation works fine.
Does anyone have any idea what the problem could be or whether there is a workaround?
Thanks!

Thanks again to "r.circa" who came up with the original solution. Here are some updated instructions that don't require creating a symbolic link to fix the libcap issue.
I was able to get 4.5.4 working on RHEL 6.3. Here's what to do:
Update to latest errata with 'yum update'; reboot
Also make sure you have latest version of both libcap and compat-libcap1 packages (via yum update...)
Exract the latest FMS install archive (4.5.4 as of this writing).
In that folder, for a successful, error-free install you need to edit three files:
server
adminserver
installFMS
For 'server' and 'adminserver', edit these sections as follows:
# Red Hat Linux
if [ -f /etc/redhat-release ]; then
        cd_check "Red Hat Enterprise Linux [WAE]S release 3" /etc/redhat-release redhat-RHEL3-i686
        cd_check "Red Hat Enterprise Linux [WAE]S release 4" /etc/redhat-release redhat-RHEL4-i686
        cd_check "Red Hat Enterprise Linux Server release 5" /etc/redhat-release redhat-RHEL5-i686
        cd_check "Red Hat Enterprise Linux Client release 5" /etc/redhat-release redhat-RHEL5-i686
        cd_check "CentOS release 4" /etc/redhat-release centos-4-i686
        cd_check "CentOS release 5" /etc/redhat-release centos-5-i686
        DIST='RedHat'
        PSUEDONAME=`cat /etc/redhat-release | sed s/.*$// | sed s/$//`
        REV=`cat /etc/redhat-release | sed s/.*release\ // | sed s/\ .*//`
    DIST="${DIST} ${REV} ${PSUEDONAME}"
        cd_result $DIST
..and:
# check distribution
PLATFORM="Linux"
ARCH=`uname -m`
SUPPORT=0
DISTRO=`check_distro`
case $DISTRO in
    redhat-RHEL5-i686)
    redhat-RHEL6-i686)
    centos-5-i686)
    Debian)
Similarly, for installFMS edit these sections as follows:
# Red Hat Linux
if [ -f /etc/redhat-release ]; then
cd_check "Red Hat Enterprise Linux [WAE]S release 3" /etc/redhat-release redhat-RHEL3-i686
cd_check "Red Hat Enterprise Linux [WAE]S release 4" /etc/redhat-release redhat-RHEL4-i686
cd_check "Red Hat Enterprise Linux Server release 5" /etc/redhat-release redhat-RHEL5-i686
cd_check "Red Hat Enterprise Linux Server release 6" /etc/redhat-release redhat-RHEL6-i686
cd_check "Red Hat Enterprise Linux Client release 5" /etc/redhat-release redhat-RHEL5-i686
cd_check "Red Hat Enterprise Linux Client release 6" /etc/redhat-release redhat-RHEL6-i686
cd_check "CentOS release 4" /etc/redhat-release centos-4-i686
cd_check "CentOS release 5" /etc/redhat-release centos-5-i686
DIST='RedHat'
PSUEDONAME=`cat /etc/redhat-release | sed s/.*$// | sed s/$//`
REV=`cat /etc/redhat-release | sed s/.*release\ // | sed s/\ .*//`
    DIST="${DIST} ${REV} ${PSUEDONAME}"
cd_result $DIST
and...
# check distribution
PLATFORM="Linux"
DISTRO=`check_distro`
case $DISTRO in
    redhat-RHEL5-i686)
    redhat-RHEL6-i686)
    centos-5-i686)
        Debian)
run installFMS as normal and it should just work.
I hope that helps. I also hope Adobe starts to support RHEL 6 users. Seriously, how much effort would it take?
Best,
Daniel

Migration Directory server from Red Hat ES to Windows2003

Hello!
I have to migrate from Directory Server 6.0 on Linux Red Hat ES to Directory Server 6.2 on Microsoft Windows 2003.
Can I use dsmig utility?
Thanks!

I don't think that dsmig will work as it was designed for migrating from 5.2 to 6.x
But I think you can do it mostly with DSCC.
Install the DSEE 6.2 binaries, configure the Console and register the 6.0 instance in it.
Then create the new DS 6.2 instance with cloning the configuration. Data will need to be exported from the 6.0 and reimported in the 6.2.
Regards,
Ludovic.

Running a web server along with Oracle XE - Port 8080 problem & solution

Hi,
My company is tight on computing power so we're using an older machine to run our Oracle XE instance and our Apache web server. The Apache server is using port 80 to host the website, while Oracle XE is using port 8080 for APEX.
Initially this did not pose any problems, but as when our consultants were at clients sites they weren't able to access port 8080. This was a huge problem for us since we use APEX for our time sheet system.
I could have used a 2nd computer to host the APEX engine on port 80 (if you want to know how to do this just search the forum), but I didn't have an extra machine at my disposal.
After doing some reading I found that I could modify the Apache httpd.conf file (/etc/httpd/conf/httpd.conf for linux systems) to handle this. I thought I'd post my results for others in the same situation:
- #Search for the mod_proxy section and add the following:
- ProxyRequests Off
- #This maps the :8080/apex to :80/apex
- ProxyPass /apex http://www.mydomain.com:8080/apex
- ProxyPassReverse /apex http://www.mydomain.com:8080/apex
- #This maps the :8080/i/ (for images) to :80/apex.
- #YOU NEED THIS since all images and js calls reference the /i/ directory
- ProxyPass /i http://www.mydomain.com:8080/i
- ProxyPassReverse /i http://www.mydomain.com:8080/i
- #Search for Alias and add the following:
- #This is optional. It will allow a simple url for your users to access a common application
- Redirect /myapps http://www.mydomain.com/apex/f?p=100
Of course you can add some restirctions, and verification for the apache module to the conf above, but I thought I'd keep it basic for this example.
Hope this helps others in the same sitation.

Thanks for all the responses I got,
Martin, Thank you
I tried the same advises on my static IP address and it works fine, and very quickly some times, thank you.
My Appache function well and I test a sample webpage.
The domain name did not succeed in my network, may be because its a fake one, I do not really know but I already have an active domain but want to use it when the things will work for sure in all the aspects, and finish the tests.
Your advises were very useful for me.
But I still get the TCP_Error with timeout, some times, I think, the issue is related to the network now (not sure, but the tests takes long time and I prefere to let you know the development for now) , I'm trying to fix the network, as much as I can to get the perfect performance. But I just wonder about the Listener , may be there is something we need to change, still testing
Did you tried your applications onsite from multiple workstations at the same time in Oracle XE using your web server?
Appriciate your help and all other attendants.
Thanks

In 4.15 admin server web interface, can account information app be run on web server instead of admin server?

Hello,
Running winnt 4.0, messaging 4.x, directory 4.x and admin 4.x. Already moved the netscape gateway to a web server instead of admin server, but also need to move the user mgt application. This is the first link listed when you go to the admin server url in the browser. I have set up <netscape root>/bin/user/admin/bin as cgi directory and set up /bin/user/admin as additional docs directory, but frames in the application just hang.
Any help would be appreciated. Thanks...

Hi Peter, Can you define what you mean by the
"User mgt Application"? Do you mean moving the entire
Administration Server to a Web Server?
If that is the case, then I do not believe that this is possible. The Administration Server itself is a proprietary architecture. The DSGW was setup from 4.0 onwards to be able to run on an external Webserver, to improve performance, but I do not believe that the Admin Server itself can be moved over.
Do you have a lot of people logging in through the Console itself? As you have already moved the DSGW component over to a sepeate sever, I'm trying to understand the need to move the Entire Admin Server over.

Error installing Application server on Red Hat 8

I am trying to install Application Server but I cant because I get an error message saying the following:
"Error in invoking target install of makefile /opt/oracle/product/ora9ias/sqlplus/lib/ins_sqlplus.mk"
Can anyone explain to me what does this mean and how can fix it and move on with the installation? Please help!!!!!!!

Hi,
Im installing Oracle 9i DS and i got a few errors so i done what was told and linked my libXm.so.2.1 to libXm.so.3.0.1 .
then i ran make -f ins_reports.mk install and i got these errors????
/u01/apps/oracle9iDS//lib//libror90.so: the use of `tempnam' is dangerous, better use `mkstemp'
/u01/apps/oracle9iDS//lib//libobx90.so: the use of `mktemp' is dangerous, better use `mkstemp'
/u01/apps/oracle9iDS//lib//libca90.so: the use of `tmpnam' is dangerous, better use `mkstemp'
/usr/bin/ld: warning: libobx90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: libnn90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: librws90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
/usr/bin/ld: warning: libde90.so.0, needed by /u01/apps/oracle9iDS//lib//librw90.so, not found (try using -rpath or -rpath-link)
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgttef'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgtlit'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `deupwdlete'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `rosuisSBind'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `snnlslmai'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `uiwnra'
/u01/apps/oracle9iDS//lib//librw90.so: undefined reference to `vgdudo'
collect2: ld returned 1 exit status
make: *** [rwclient] Error 1
Can someone please explain why this is happening.
Thanks alot.
Jamil.

Error message when trying to run Apache Web Server from OSX 10.3.9

Hi there
I accidently deleted the index.html file, and upon replacing it, I get the message "Forbidden
You don't have permission to access /~fourdcmac/ on this server.
Apache/1.3.33 Server at 4.local Port 80"
I have tried repairing permissions using Disk Utility, and manuall checking the permissions on the file against the same file on other machines.
Any ideas anyone??
Thanks
Macfool

I think the problem is that typically in Apache if you don't have an index.html file then the server will display a listing of files in its directory. This is controlled by having an "Options Indexes" directive in the configuration file httpd.conf.
If your permissions on the folder in question don't allow you to read the folder contents, then if your index.html is missing this error may come up.
Also, if you don't have an index.html file, and you have "Options -Indexes" then you will not be allowed to browse the folder.
Your best bet is to create a new index file.

Running Oracle Sql Developer under Red Hat 5

Hello,
I am trying to run Sql Developer but get those various errors (oracle 10g is installed and works).
Am I trying to execute the wrong thing?
[screen print|http://metalray.redio.de/dokumente/sqldeveloper.JPG]

ok it was the wrong file. the right one is
'/opt/sqldeveloper/sqldeveloper.sh'
which is then asking me for the pathname of J2SE, which is the java virtual machine I guess.
typing in
'/usr/lib/jvm/java which is then extendet to '/usr/lib/jvm/java/bin/java' does not work
(although this directory exists)
Any suggestions?

To run a java program via a batch file,when called from a web server

REM This batch file runs the Spider with the [-v] option.
REM Lines 51 through 54 are simple DOS commands..they call the Spider
REM The location of the Spider package is the important piece of information here...
REM a batch file has access to the whole computer where the server resides.
setlocal
set JDK=C:\j2sdk1.4.1_01
set PATH=%JDK%\bin;.;%PATH%
CLASSPATH=%JDK%\jre\lib\*.jar;.;%JDK%\jre\lib\ext\*.jar;.;%CLASSPATH%
java spiderpackage.EntryPoint -v
endlocal
I am trying to run this batch file from my web server.I can see nothing on my browser.I can run the same program from my machine but unable to run from web server.what should I do?

I am making my question more clear...
I have a Windows batch (*.bat) file that echoes some html, then calls a java program the output of which is html as well, then echoes the final html.
To make sure that the java program gets properly executed, I set the necessary environment variables (e.g., JDK, PATH, CLASSPATH, etc.). The script looks something like this:
setlocal
set JDK=path_to_JDK
set PATH=path_to_java
set CLASSPATH=path_to_java_classes
echo ^<html^>^<body^>
call java foo
echo ^</body^>^</html^>
endlocal
The idea, of course, is to call this script through a browser, on a web server.
Curiously, both echo lines return to the browser just fine, but any output from
the java program (which just writes html to STDOUT) does not make it back.
Can someone explain to me why this is happening? How do I set things up so that the output (STDOUT and STDERROR) from the java program make it back to the browser?

How to Create Shared Storage using VM-Server 2.1 Red Hat Enterprise Linux 5

Thanks in advance.
Describe in sequence how to create shared storage for a two guest/node Red Hat Linux Enterprise using Oracle 2.1 VM Server on Red Hat Linux Enterprise 5 using command line or appropriate interface.
How to create Shared Storage using Oracle 2.1 VM Server?
How to configure Network for two node cluster (oracle clusterware)?

Hi Suresh Kumar,
Oracle Application Server 10g Release 2, Patch Set 3 (10.1.2.3) is required to be fully certified on OEL 5.x or RHEL 5.x.
Oracle Application Server 10g Release 2 10.1.2.0.0 or 10.1.2.0.1 versions are not supported with Oracle Enterprise Linux (OEL) 5.0 or Red Hat Enterprise Linux (RHEL) 5.0. It is recommended that version 10.1.2.0.2 be obtained and installed.
Which implies Oracle AS 10.1.2.x is some what certified on RHEL 5.x
I think it would be better if you get in touch with Oracle Support regarding this .
Sorry , I am not aware of any document on migration from Sun Solaris to RH Linux 5.2 .
Thanks,
Sutirtha

Running OEM Web Server on Red Hat AS

Similar Messages

Maybe you are looking for