Running QT Pro on Standalone - No Internet Connection

SUBJECT: Running QT on Standalone - No Internet Connection
I use XPpro SP2 and a friend who runs a MAC has been encouraging me to take QT Pro out on a trial run for a long time.
However, my editing system is isolated from the Internet. I have looked extensively on the Apple Site, also the QT site, talked with various folks on the phone, but can not get advice on how to set up the programme and how I am enabled to obtain manual updates that come along from time-to-time.
Any wisdom or links greatly appreciated.
Bill in Toronto

Download the PC version of the QuickTime Player app on a PC and burn the installer to a CD. While online you'll also need to purchase the Pro upgrade and record the registration info.
Install QuickTime 7.2 on your computer and enter the registration info (no Internet connection required to upgrade to Pro).
Enjoy Pro.
Updates would require you repeat the download (always a completely new install as QuickTime doesn't do "partial" update only software) and burn process.

Similar Messages

You can't use The following message is stopping me access my disk utility. 'this version of the application "Disk Utility" with this version of OS X.' not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
Help

For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility.

My 2007 mac pro has a slow internet connection with lion

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Running a Time Capsule witn no internet connection

Hey,
I have recently moved overseas from the UK & no longer have a DSL broadbaond connection to supply my Time Capsule with. My internet is now accessed via a USB modem so I am unable to use this with my Time Capule, hence the question. When I plug my Time Capsule into the mains power & acees it as I normaly would I am finding it taking very long to access my iTunes & iPhoto libraries which I have on the Time Capsule, this is also in line with the messages I am receiving telling me that my Time Capsule is not connected to the internet & an orange status LED on the front of the unit.
Is it possible for me to configure the time capsule so that it is not looking for an internet connection allowing it to run quicker just as a Hard Drive?
cheers,
Scott

Welcome to the discussions!
+Is it possible for me to configure the time capsule so that it is not looking for an internet connection allowing it to run quicker just as a Hard Drive?+
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the word "Status" and window will appear with information about why you are seeing the flashing amber light.
Click "ignore" next to the item that tells you that you are not connected to the internet.
Click Update at the lower right at the Time Capsule will restart.

Problem connecting my macbook pro to a wired internet connection via ethernet cable adapter

I am having a problem connecting my macbook to a wired internet connection in an area in my workplace where there is no wifi. The macbook works fine on the same internet connection via wifi in other parts but when I add it as a wired connection it doesn't show any connection. I have turned off wifi to make sure that it is not trying to pick up a poor connection but I still can't get this to work. I think I am trying to set up the connection properly but can't be completely sure. Any help would be appreciated.

Open System Preferences>Network and make sure Ethernet is selected. If it is, open Advanced Settings (at the bottom of the Network window). Click on the TCP/IP tab. Configure IPv4 should be set to "Using DHCP".
Configure IPv6 should be set to "Automatically". When those are set click the "Renew DHCP Lease" button

Port Forwarding to Mac Pro with 2 different internet connections

I have my Mac Pro connected to the back of my cable modem. I have given this service the name "Cable" in my network preferences. The details are:
IP: xxx.xxx.xxx.100
Subnet: 255.255.248.0
Router: xxx.xxx.xxx.1
I have the other Ethernet port of my Mac Pro connected to the back of my Airport Extreme which runs ADSL+ from another ISP. I have called this service "ADSL". The details for this connection are:
IP: xxx.xxx.xxx.188
Subnet: 255.255.255.0
I run a calibre server on the Mac Pro and on my PC (the PC is directly plugged into the back of the Airport Extreme). I have a Dyndns service that works on the address of the Airport Extreme base station.
I can access the PC's calibre server via the mobile network but NOT the Mac's. Even though I have port forwarding to the Mac's reserved IP address of 188, I can't access the server. I can access it on my iphone/ipad via WIFI but not from the mobile network.
If in my Network preferences I change the order of the services i.e. make the ADSL the top service and cable the second, I CAN access the server from the mobile network. It works as it should. If I change the order so that the Cable service is on top, I can't access the server again.
Why does this happen? Can I fix this? Do I need to set up another Dyndns service on my Mac Pro?
Any help would be greatly appreciated. I am going to post this as a new post as well because I'm not sure whether the people that were so helpful last time will know that I have updated the post.

Just installed TeamViewer and we're using that. Works great.

Can a Powerbook running 10.4.11 share its internet connection with an iPhone 4s?

I have a 10-years-old Titanium PowerBook - still runs as good as new - with a Virgin Mobile 3G modem stuck in its backside. All my other Macs share the modem without any problems but my iPhone 4s doesn't seem to be able to. The iPhone logs onto the network like it should but every internet app on the phone tells me there's no connection.

Hello,
Sadly not as an iPhone 4 running iOS 6 or above needs Mac OS X 10.6.8 or higher to sync in iTunes.
Mac OS X 10.6 is not compatible with an PowerBook

Why is Firefox continuing to run after I shut down the internet connection?

I am having a problem with Firefox not shutting down. I shut down the internet, then go back on later and I get an error message that Firefox is already running and that I will need to reboot my system to clear the problem. I am running Firefox 3.6.17 on Windows Xp with sp3. I tried running Firefox 4.0 and it just did not run at all so I went back to the previous version.

Hanging at exit is usually caused by and Extension or Plugin.
Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem:
***See:
****https://support.mozilla.com/en-US/kb/Safe%20Mode
****http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

My macbook pro has lost the internet connectivity. My friends laptops all appear to be working using the same ethernet connection. It all has been started just after I have updated mz Macbook pro to latest OSx update. Please help

please help..I am suffering since last few days and now posting from my friends laptop bz using the same eathernet cable.

Run the Network Diagnostics assistant. How far do you get?

My macbook pro has lost the internet connectivity. My friends laptops all appear to be working using the same ethernet connection and connection leads but my Macbook pro refues to connect. it was working fine less that 2 hrs ago?

Being new to Mac's i just want to know what to check, can any one help?

System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Ethernet
Click the Assist Me button
In the popup window click the Diagnostic button.

HT203163 itunes store won't connect on my Windows surface pro despite having strong internet connection. Any help please?!

pleasehelp!

Try this,
Close your iTunes,
Go to command Prompt - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
In the DOS screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

Mac Pro running 10.10.2 loses internet connection when sleeping

My Mac Pro running 10.10.2 loses its internet connection only when it goes to sleep. I always have to jump through hoops to reconnect to the internet when it wakes

Try suggested links
http://www.bing.com/search?q=mac+loses+internet+connection+fix

New Macbook Pro (Late 2013) Continuously Loses Internet Connection

My new macbook pro is constantly losing internet connection. I have already:
1) Replaced my home modem and router (just in case)
2) Troubleshot the home internet with ISP - they say it is not on their end.
3) Run through a million resets of the home internet system
4) Checked to see if other computers are losing internet (No, it seems to be only this computer affected)
5) Done diagnostics with Apple on two separate occasions (This did no good)
Now the interesting thing here is that I thought at first it might be a hardware issue with the internal mac modem on the computer. That is also what apple was suspecting... HOWEVER, whenever this happens, if I reset the PRAM everything is fine again for 3-7 days. You would think this would not be the case with a hardware issue, right? (It is important to note here that apple said PRAM reset wouldn't change anything - but it clearly does)
I have seen posts saying the antenna could be bad when others have had this problem, but again, if PRAM reset works, you wouldn't think it was the antenna, right?
This is driving me crazy and it is a new machine. I am also in a situation where I don't want to be without it for days to have it repaired so any suggestions on how to fix this problem would be helpful.
I have considered that it might be a profile issue (I did migrate another profile to this machine), but again that seems unlikely.
Any help or suggestions would be appreciated! Thanks much!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My time capsule runs very slowly and keeps disconnecting my internet connection, can anyone help me please?

Hello all I have recently pulled out my 3TB Time capsule and attempted to use it to back up my all Mac network, starting with just my desktop. I gave up on it before and started using Time Machine with WD EHD's which work fine. The reason that I gave up was that the Time Capsule kept freezing and hanging and I couldn't rely on it for a back up. I have reset it to factory settings and reconnected it as per the instructions, using it to extend my network, the hub is a BT infinity setup. Anyway it looks like it is going to run, then keeps shutting down my internet connection and I suspect it is taking longer to run the backup than it should. Has anyone else had this problem or can help please?

What model is the 3TB TC??
If the computer is using Yosemite the setup of the TC needs to be right. It can also be hardware issue if you are talking about the previous gen4.
Here is a list of things that can help with yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Oracle 10g and internet connection

I recently installed a program which uses and installed the Oracle 10g database, but cannot run the database while I have an internet connection. If I disable my internet, I can run Oracle and my program. If I am connected to the internet and run the program it pops up this box:
DATABASE LOGIN FAILED
+... due to Oracle condition:+
ORA-12541: TNS:no listener
OK
When I click Ok, it pops up a new box with 2 tabs: one asking for me to:
Choose a (named database)
This installation stores data in a named Oracle database.
Since you may have several such databases, please select the name of
your desired database from the list below.
Note: If you are connecting to a local, single-user database, it may not have
a name, or its name may not work. In that case, you would need to choose
the entry "<<always use default>>".
There is a drop down box with 3 choices for the Database to use for this installation: XE, ORACLR_CONNECTION_DATA, and <<always use default>>
The other tab is:
Describe Privileged Account
For maintenance purposes, this system also needs the name and password of
a privileged Oracle user account. It uses this privileged account
only as needed, for various setup and maintenance tasks, such as
o creating the application's user account,
o providing it with storage space,
o providing backup/restore services,
o applying software updates.
Please enter the privileged account's name and password below.
If you do not know the account's name and password, please contact your
Oracle database administrator (DBA).
And it is asking for a user name and password. The Oracle help said that info should have been displayed somewhere during the Oracle installation process, but being as though I installed another program that did the Oracle, I don't think I ever saw it.
I think it may matter:
XP Pro SP 3
2.4 GHz processor
3 GB RAM
To summarize; is there a way to run the Oracle database and my internet connection?
Finally, I apologize for likely not providing all you would need to answer my question, I will provide anything else I can if it will help.
Thanks
gj

Hi, thanks for the quick response.
I went through the steps in the loopback adapter installation link you provided and have added a loopback adapter. When I do the ipconfig/all I get the following for the loopback adapter:
Ethernet adapter Local Area Connection 4:
Connection-specific DNS Suffix.....:
Description...............................: Microsoft Loopback Adapter
Dhcp Enabled...........................: No
IP Address...............................: 192.168.25.129
Subnet Mask............................: 255.255.255.0
Default Gateway.......................:
So it appears that is good to go. The issue still persists. Below is system information and Oracle information.
System:
Microsoft XP
Professional
Version 2002
Service Pack 3
Registered to:
Me
My company
serial #
Computer:
Intel(R) Core (TM) i5 CPU
M 520 @ 2.40 GHz
2.39 GHz, 2.92 GB of RAM
Physical Address Extension
And Oracle is:
Oracle Database 10g Release 2 (10.2.0.1) Express Edition for Microsoft Windows

Running QT Pro on Standalone - No Internet Connection

Similar Messages

Maybe you are looking for