Client independent and dependent transport request

Hi
I have a list of transport requests, I need to find which is a client independent and which is client dependent request.
I am aware that workbench req is client independent and customizing req is client dependent.
But i think i need to look someting else also, please help
Regards

Very interesting!
As we all know that customizing requests are always client dependent, the question obviously target workbench requests.
To my knowledge tables are always cross-client, but their contents are not necessarily.
As one can put table -contents- into a workbench request as well, this one would thus be client dependent. Same applies e.g. for forms.
But E070* does not give any information about the transport contents.
E071* however states the objects included, but not if those are client dependent or not.
How are table -contents- and forms reflected in E071* ? Can I filter for those somehow?
Thanks
Christoph

Similar Messages

Which are client independent and dependent objects in SAP ABAP

which are client independent and dependent objects in SAP ABAP

Hello Jagrut
A special kind of objects are client-dependent repository objects. These objects have to be treated specially in the way that they have to be imported into their specific target client. In contrast, client-independent repository objects can be imported into any client.
The following list shows the client-dependent repository objects:
LIMU FSEL Field Selection
LIMU VARI Report Program System Variant
R3TR COC1 CO: Cost Centers
R3TR COC2 CO: Activity Types
R3TR FORM SAPscript form
R3TR LODS HRDSYS: Logical information object client-dep. table E SYST
R3TR PCYS HR: Transport standard personnel calculation rules
R3TR PHDS HRDSYS: physical information object client-dep. table E SYST
R3TR SBNL Logical Information Object for BDS
R3TR SBNP Logical Information Object for BDS
R3TR SBNR BDS: Relationship Between Information Objects
R3TR SBPL Logical Information Object for BDS: Bid Invitation
R3TR SBPP Physical Information Object for BDS
R3TR SBPR BDS: Relationship Between Information Objects
R3TR SBRL Logical Information Object for BDS
R3TR SBRP Physical Information Object
R3TR SBRR BDS: Relationship Between Information Objects
R3TR SBSL Logical Information Object for BDS
R3TR SBSP Physical Information Object
R3TR SBSR BDS: Relationship Between Information Objects
R3TR SBTL Logical Information Object for BDS
R3TR SBTP Physical Information Object
R3TR SBTR BDS: Relationship Between Information Objects
R3TR SBWL Logical information object for BDS
R3TR SBWP Logical information object for BDS
R3TR SBWR BDS: Relationship between information objects
R3TR SRHL SRM: Hierarchical Lists
R3TR SRLD Language-Dependent Client-Specific Retrieval Index Objekt
R3TR STYL SAPscript Style
Regards
Uwe

Client independent and dependent tables

Hi,
Is there any report or program to get list of all client independent and dependent tables from a client in sap ECC6.0 ?

Check the table DD02L and the field CLIDEP. If its set as X they are client dependent tables else client independent tables.
Vikranth

Client independent and dependent

Hi All,
What are the Client dependent objects and independent objects in Financial Accounting and Controlling?
Urgent please
Thanks and regards
Krishna

Go to SPRO-Additionl information-Technical data- Client specific.
The to the right of the implementation guide categories you'll see either Client-specific (customizing) dependent or Cross-client (workbench-independent)
pls assign points to say thanks.

Difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.

Hi Experts,
What is the difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.
Thanks

Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) * ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Co-Locate Client Access and Edge Transport Role on Same Server?

Co-Locate Client Access and Edge Transport Role on Same Server?
Is it possible/supported to install the Edge Transport Server Role on the same machine that the Client Access role is installed on now that 2013 SP1 has added support back in for the Edge Transport Role?
jon

No.
Unless something has radically changed from before...
EDIT
No, nothing has changed:
"If you want to install the Exchange 2013 Mailbox or Client Access roles on a computer, see
Install Exchange 2013 Using the Setup Wizard. The Edge Transport role can't be installed on the same computer as the Mailbox or Client Access server roles."
http://technet.microsoft.com/en-us/library/dn635117(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Transportable and non transportable requests in the SRM EBP cusomizing

Hi friends,
can u please give the list of transportable and non transportable requests for the ebp configuration.
thank
Arun
Edited by: arun kumar on Aug 6, 2008 8:19 AM

wrong forum
Regards
Juan

Moving object from one client to another using transport requests...

Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
Rajesh

Hello Rajesh
If the two systems share a common transport directory then you can simply go to transaction STMS, double-click on the import queue (target system), then choose menu Extras -> Other Requests -> Add.
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module EPS_FTP_PUT to copy the data and cofile from the source to the target system (check for DIR_TRANS directories using transaction AL11).
Regards
Uwe

Crystal Reports - Saving and the transport request screen

Good morning BI people,
Has anyone had this annoyance?
You are creating a Crystal report(2008 v12.2.7.598) with connection to sap bi(7.01) and when you save, the transport request screen doesn't come up front of crystal reports, it is created behide the screen. so, you sit and look at the hour glass for 5 mins, move on to other things, and then you realize that the transport screen is behide the crystal reports screen. and, it is not like you can minimize the crystal screen. you have to minimize all your screens and then click on the crystal screen from you tool bar and then, the transport screen comes up.
anyone have a fix for this?
or am i alone....
thx,
Erik

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

CTS project and related transport request

When I create a new Project, I create also the CTS project in the development system. When the CTS project is created, also a related transport request is created. When I try to close the task list related to the project, it try to close the CTS project but I does not manage to release that transport request. How can i release the transport request related to the CTS project?
Thanks
Antonello

Hey Antonello,
The release of Transport Request is controlled by something called as "Project status switches".
Go to \n\tmwflow\proj tcode.
Go to the Tab " Project Status Switches", ensure that you select the Relevant\Correct Maintainance Proj..
When In the Project Status switch , there is something called " Transport Request can be released ", Transport request can be Imported " and so on.
Please click on Chaange on " Transport Request can be released", now TR can be released directly in R\3 without using Solman's CHARM.
Please reward if this post was usefull.
Revert For any Clarifications.
Regards,
Suzanne.
Message was edited by:
Suzzanne Dsouza

Export and Import transport request between different version?

Hi,
I have tried to Export the transport requests from ECC5 to ECC6 via STMS .Its not throughing any error but no Master datas are transported. Anyone have idea about that?

Hello,
From my experience SAP didn't recomneded transporting from 46C -> ECC5.
The structure of tables and objects are a little bit different between different
releases.
Dimitry

Client independant and client dependant

can anybody explain me what exaclty is clientdependant and independant..also cross client means?
thanks and regards
vijaya

Hi Durga,
    As the name says
    Client - for example assume there is company called
             "sony". It can have many plants across the
             countires. Sony divides these plants into
             different groups based on functionality.
             These groups are called client.
    Mostly which ever the object that is developed in the SAP will developed in a way that is usefull across users.
    But there will some sepcific needs for users/clients of SAP like language barriers....units..currecies....etc...etc. Which will be not same for all.
    Client dependent - if object is prepared taking
                       into consideration of above
                       example barriers it is dependent
                       ELSE.
                       It is client indpendent.
   Client dependent or independent can be know for the filed sy-mandt. and also in SE09

Client independent and Dynamic Test data upload

Hi all,
1. While creating the Script as part Attribute we r specefying Target Sys. to record.
   If i want to execute same script name some other client, without changing the Target sys., is it runs by defining that RFC for that sys. in Sys. Data container?
   2. i am specefying   the location of test data file as part of test data container and sys. data container's.
       Whenever i make the changes in the test data in the Excel Interface, it is not automatically updating in the Test data container or Test configuration?
       Is it req. to go to test data container -> Edit -> Varients -> Upload. each and every time the changes made?
   Any solution with u?
Regards,
Sreedhar

Hi Sreedhar,
Check this link for question # 1... How to parameter Target System in eCATT
For Question # 2, As far as my knowledge goes, once you upload an excel, repository will only store the present copy of the test data, not the shortcut of the excel and then keep on updating for every change that is made in the test data repository. So you will have to upload the again when ever any changes are being made.
Others @ Pl correct me if I was wrong in saying that.
Hope this answer helps.
-Harsha

Transporting request no for ALE configuaration?

Hi all,
I have completed the creation of SO with ALE-IDoc .Now i have to transport the requests top PRD.
But i have one doubt that can ALE configurations transportable?
Please reply ASAP.
Thanks,
Vamshi.

Hello Vamshi,
SCC4 - Is a client independent and its transportable.
we21 - client dependent and non-transportable
we20 - client dependent and non-transportable
BD64 - client dependent and non-transportable
The reason behind the client dependent and independent are when you are sending or receiving the data it should be identified by the sender or receiver. For each server the sender will be different may be the receiver is same, we have to again configure for the receiver who is the sender. There is no other alternative i guess we need to configure again in production.
Please reward if it is helpfull
Thanks & Regards,
Naresh.

Client independent and dependent transport request

Similar Messages

Maybe you are looking for