Running STAR program in Date Effective mode

Hi All,
How the date effective mode of Synchronize Territory Assignment rule concurrent will work? Will it sync all the active territories in that date range? For example if I run the STAR program from 01-Mar-2010 to 31-Mar-2010, will it sync all the territories which are all active in this date range? Will it pick up the territory which has start date as 01-Feb-2010 and end date as 30-Apr-2010?
Please advice..
Thanks,
Suresh.

The only emulator for running Classic apps I know of is SheepShaver, and from what I've read (though not confirmed) it doesn't work under Snow Leopard (not surprising; SheepShaver hasn't been update in over three years, from what I can see). It also requires the ROM image from an older Mac, and if someone had access to an older Mac to get the image, they could just run the app on that older Mac.
So I think that the ability to run Classic apps is now completely dead as of Snow Leopard.

Similar Messages

Is it possible to run a program in compatibility mode?

I am running 10.7.3, and I am trying to get Mackie Tracktion 3 up and running on my Mac. I've been told tha T3 works on previous version of the Mac OS, but not the last few updates. Is there any way that I can run this program in a compatibility mode, or revert my OS to a version that supports T3? Any help would be greatly appreciated.

Sorry, but that's most likely a problem that Mackie is going to have to help you with. Since the application launches, it's not an issue of the application being PowerPC-only, which has affected many people who've moved to Lion. Mackie's support site is very limited and uninformative, so I can't find any useful suggestions. You might have more luck in Mackie's forums:
http://www.mackie.com/ubbthreads/ubbthreads.php/
Good luck.

"Error determining planning periods for calendar " when running a program

Hi,
When i am running a program with date range say "01/05/2011" to "30/06/2011",the program is executing successfully without any error. When i am executing the same program with date range as a) "01/05/2009" to "30/06/2011" and b)"01/05/2008" to "30/06/2011" the program is failing with error as "Error determining planning periods for calendar". Can anyone suggest me what i should do to avoid the failure of the program with above date ranges also.
Thanks in advance,

Dear,
Error message 61123:"Error determining planning periods for calendar &".The PPC planning calendar specified in the material master MRP 2 view for the material is incorrectly.
The planning calendar periods are insufficiently maintained for the planning calendar used.
Check the period of planning calendar in MD26 and generate the correct period.You can avoid the problem in several ways:
Maintain the planning calendar far enough in the future (at least until beyond the end of the planning horizon).
Also check any demand is lies beyond the validity period of planning calendar.
Reduction of the planning horizon of MRP also can control such issue, as MRP planning horizon lies in an area in which the planning calendar is no longer maintained
Regards,
R.Brahmankar

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

Running Payment Program before Due Date

Hi Gurus,
I have a problem.
I want to run the payment program -Tcode F110- before the due date and I need the document posting date to be the same as the due date.
How could I sort it out?
Please help,
Samuel

Your requirement can't be fulfilled by standard set-up, because SAP payment run can post with only one posting date in a single run. This posting date will be what you are entering in the parameters, and system will not split payment posting date separately based on Due date. You can group your items based on due date and can pay future due items as well but you can't split your payment posting with different payment posting date based on due date in a same payment run.
You can possibly do following workaround.
- Run vendor open item report (T-code FBL1N) and sort it based on Net Due column (if net due date column is not available change the layout to populate it). And decide for items with which due dates you want to settle today. Lets say you want to settle for following due date xx/xx/xxx, xx/xx/xxx1, xx/xx/xxxx2
- Then you should run three payments run separately.
Payment run 1 parameters- Posting Date=xx/xx/xxxx, Next Posting Date=xx/xx/xxxx+1
Payment run 2 parameters- Posting Date=xx/xx/xxxx1, Next Posting Date=xx/xx/xxxx2
Payment run 3 parameters- Posting Date=xx/xx/xxxx2, Next Posting Date=xx/xx/xxxx3
Imp: Note that Posting date=Due Date and Next Payment Run Date=Due Date1 in the parameters+
This will involve more than one payment runs in a day but will satisfy your requirement
Thanks
Ranjit

GPO Run these programs at user logon not taking effect when configured in Computer Configuration section

[EDIT 20140207]:
I found that the default domain policy sets "run these programs at user logon" and (other than I expected) not BOTH GPO settings become active, but the setting from the default domain policy overrides the setting from my new GPO. So I think I have
found the answer myself.
When on our W2k8-R2 DC I create a new GPO and configure
"Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe" (just for testing) it won't take effect on Win 7 SP1, no matter what the Security
Filtering options are.
It seems other settings (in the very same GPO) become active but "run these programs at user login" from the computer policies section doesn't. I configure the very same setting in the section "user policies" instead and add "Authenticated
Users" to Security Filtering, the program will be started. But that's not what I need.
I can reproduce the issue, here are the exact steps:
create a new group "group-a" for later security filtering
create a new GPO
in the new GPO set "Computer Configuration/Policies/Windows Settings/Administrative Templates/System/Logon/run these programs at user logon" to "c:\windows\system32\notepad.exe"
for setting the scope remove "authenticated users" from Security Filtering and add "group-a" instead
link the GPO to the domain root
make "test computer" a member of "group-a"
on "test computer" run "gpupdate /force", reboot, log in
Issue: notepad is not being started.
What I'm aiming for is obvious: Depending on the membership of group-a I want to configure certain programs that should be started whenever a user logs in.
gpresult /R returns that it would be applying the GPO. (It actually is but the setting "run these programs at user login" is not being applied.)
For debugging I started MMC / RSoP on one of the machines on which the GPO should have been applied and found that "run these programs at user login" is not set (which seems to be the reason why the GPO won't work on the machines).
Searching the web I found similar reports
[1] [2] but no solution was found and the user used a workaround instead.
If I change the GPO so that I use the very same setting in "user configuration" instead of "computer configuration" it works as long as I add "authenticated users" to the Security Filtering. But then the GPO is applied to all users
and not only to the ones using computers which are members of group-a. According to this howto [3] I should not remove "authenticated users" but alter the security setting instead. However, the howto seems to be aimed ad w2k3 and using Win2k8 I cannot
find security settings "apply" for "authenticated users" so I cannot remove that setting, there's only "read" or "read and modify".
So two questions:
1. Why doesn't it work when using "computer settings"
2. What about that Security Filtering with removing "authenticated users" and using group-a instead?
T.
[1] http://social.technet.microsoft.com/Forums/windows/en-US/0e280490-fba6-4ced-aba5-ae49c60e44bd/computer-gpo-run-these-programs-at-user-logon-not-working-as-intended-on-win7-clients?forum=w7itproinstall
[2] http://social.technet.microsoft.com/Forums/windows/en-US/8cb78bf8-33ec-461e-8604-32d82d016685/run-these-programs-at-user-logon?forum=winserverGP
[3] http://www.grouppolicy.biz/2010/05/how-to-apply-a-group-policy-object-to-individual-users-or-computer/

Hi,
sounds like you find the answer already.
If you have any further question, please feel free to let me know.
Have a nice day!
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Run an ABAP program using Data Services/Integrator

Hi,
Its it possible to run an ABAP program from Data serives
There is an aBAP program already created , what it does is to move file from working dir to another directrory
Can i execute the ABAP prgram from Data Integrator. If it;s possible
Any suggestions on how to do it
Thanks

Yes it might be possible.
First of all create a batch file based on the following link ...
http://webcache.googleusercontent.com/search?q=cache:V-Qc73pxxVcJ:www.sap-basis-abap.com/abap/how-can-we-run-abap-program-from-command-line.htmtoexecuteanabapfromwindows&cd=4&hl=en&ct=clnk&gl=uk
After doing so call the batch file from the following DS command exec() ... exec(command_file, parameter_list, flag)
Thanks

Can't run a lot of programs unless the program is in compatibility mode

Recently, I have been unable to run certain programs like Steam and Skype, and even browsers, without the use of compatibility mode. It has become so frustrating that I cannot run a certain game in compatibility mode because it may seem I would be doing
so with ill intentions. Does anyone know how to fix this?

Have you recently upgraded windows version?
Have you used system restore or back-up disk?
What is your current windows version?
What operating system is your pc native to? (32bit or 64bit)
Can you remember any actions that took place that possibly caused issues?
iron8orn

Let all channels(with same data structure)run one program

Hello,
I want to let all channels with same data structure run one program,how can i program it?
Thanks!

Hi charleen,
You're going to need to provide more details for us to help you. In general "channels" do not "run" programs. You can, however, run a program which loops over channels, checks their properties, and decides whether to include them in the overall analysis. What do you mean by "data structure"?
What do you want to actually happen in the "program"?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Re-initialize the data during running the program

Any function in the Labview that can help me to re-initialize the data during running the program?
Thanks!
Regards,
Ivan

Ivan,
I am not sure if I understand your question. You can reinitialize your board and load different board parameters at any time as a part of your program. This will stop actions on the board and then start over with any movements. Use Initialize Controller.flx VI to do this.
A. Talley
Applications Engineering
National Instruments

Cannot open data file to run registration program

I just bought my new laptop last week and after Ive added all my files (105G) and a few programs, this error message comes up upon startup "cannot open data file to run registration program". I was told by the Toshiba people to use a recovery cd but that it would reset my computer back to its original settings which i don't want to do. I have Vista and everything works fine but Id rather not get that message every time I boot up. Any suggestions?

Thanks for adding Defender.
We have something in common. Avatar that likes to Stealth hehe.
Fixing Computers no Jutsu! (Ninja Help and Support Technique )

Field Service - STAR program is completing with Error message

Hi
Synchronize Territory Assignment Rules (STAR) program is getting completed with following error message:
Parameters used were 'Service' with a Run mode as 'Total Refresh'. It errors out with 'No data found' error message. (Log file appended below)
Can someone help to find out root cause?
Regards,
CRM Foundation: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
JTY_STAR module: Synchronize Territory Assignment Rules
Current system time is 29-APR-2011 15:01:48
**Starts**29-APR-2011 15:01:48
**Ends**29-APR-2011 15:01:55
100 : ORA-01403: no data found
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 29-APR-2011 15:01:55
P.S. Reposting - It looks like I had posted in wrong category earlier. Sorry!. Re-posting again with CRM category for Field service this time.

As per the SR we had to laod all the old rates, as this was the beginning of a new fiscal year.

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

"error in accessing Star office configuration data"

Hi I'm posting this on behalf of someone who has Star Office 7 pre-installed on their PC. They are no longer able to open Star Office and are getting the message in the title above. Their message to me is below:
the exact message is Star office cannot be started due to
an error in accessing Star office configuration data
It is not a trial version it was with the comuter when I bought it from Aldi.
It is Version 7 Star Office. I have not recently added any more programs, or changed the way i am running the computer.
I cannot find this issue reported in the forum. i have found a similar open office issue in the faq.
OpenOffice.org fails to start, and the following error message appears:
OpenOffice can not be started due to an error in accessing the OpenOffice.org configuration data.
Please contact your system administrator.
The following internal error has occurred: Get Storage: "No Content".
The message often occurs because a file named Common.xcu becomes corrupted. In most cases, this file becomes filled with 0s. The problem seems to occur most often in Windows, possibly as a result of a crash or an improper exit while OpenOffice.org was open.
http://documentation.openoffice.org/faqs/various_topics/019.html
are they comparable? if so, could someone advise on transfering the recommended action to Star Office 7? Thanks! Nick

Thursday 15 February 2007
I am assuming that you are referring to a Windows system.
SO7 and OOo1.1.x are based on the same OOo build series - 645. Most of the time comments about one apply to the other, except in the case of SO7 commercial addons. (SO8 is 680).
The error message indicates that their is corruption in some kind in the User data found in
\StarOffice7\User.
The easy way to fix it is to back up the User folder, then delete it and let SO7 rebuild the user data.
You can try backing up and deleting Common.xcu only--it's found in two places, in both the Share and User folders.
\registry\data\org\openoffice\Office
I suspect the one in Share is used for the creation of the one in User, but I am not sure.
Phil

/SAPAPO/SDRQCR21 program is not working correctly if we run the program for range of material and plant wise

Hi APO Experts,
In our project, we have received more sales order inconsistencies which is not clearing by CCR program and it is clearing by program /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow, So We have decided to schedule the background job on daily basis for program /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow, performing the testing in our quality system and observed the below strange behavior.
When I am running the program /SAPAPO/SDRQCR21 with Range of products and some location range with option as Build Reqmts from Doc. Flow, in Background job. In output it is suggesting to delete one sales order. If I checked that Sales order in ECC, it is for an different location, that is not part of my selection and the order is open. In MD04 the Qty is showing 1 ( as per sales order) but in APO RRP3 view the order qty is showing Zero. I have run the CCR, it is coming in different in content and if I push, the different is not going to APO.
I have tried running the program /SAPAPO/SDRQCR21 with plant which is mentioned in that sales order with option as Build Reqmts from Doc. Flow, in Background job , it is suggesting this sales order under update option correctly.
Can you please help me understand why it is behaving differently like the location is not part of my selection and why it is suggesting the wrong action. And also whether is it advisable to run the /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow at plant range and material range in background job.
Thanks & Regards,
Sundaram Radhakrishnan

Sundaram,
It sounds to me like the sales document records in the OLTP and in APO were created at different times. This is common in Dev and Qual environments when the systems are commonly created at two different times, and each was a copy of an existing system that contained sales data. The order number you see in //rrp3 is somewhat irrelevant; system generally uses the guid for many activities.
FYI during Dev and Qual refreshes, if you are copying from a production environment that contains data, it is always best to create the OLTP and SCM images at the same time, and to copy them both to the Dev and Qual systems at the same time. If you don't do this, you are faced with the additional tasks associated with getting the copied systems back into synch.
If this is Dev or Qual, I suggest that you just completely wipe out all sales orders in APO and rebuild them using the CIF.
If this is a mature production environment, the only time I have ever seen this issue is due to improperly created CIF enhancements. Speak to your developers to find the root cause, and correct this problem. Then, wipe out all sales orders and rebuild with CIF.
Best Regards,
DB49

Running STAR program in Date Effective mode

Similar Messages

Maybe you are looking for