Running Two Systems with a Single PSU?

Interesting setup by MSI in Computex Taipei 2006.
http://sg.hardwarezone.com/articles/view.php?id=1928&cid=19&pg=1

I believe that if you use a good PSU, it should not be a problem... It just the caps that needs more power to double or triple the intial kick start power.

Similar Messages

  • How do i run two threads with different sleep times?

    How do i run two threads with different sleep times?
    Ive got thread A and thread B, they both update a jpanel.
    They both start when i press the start button.
    However thread A updates every 250ms and thread B updates every 1000ms. i cant just run them both at 250ms becuase this will mess it up.
    So for every four runs of thread A i want thread b to only be run once
    Does anyone know how to do this?
    Thanks, Ant...

    ok, ive done it but now i cant stop it!
    ive added buttons to start and stop, the start button works but the stop button doesnt. why doesnt "t.stop();" work?
        public void run() {
            while(t == Thread.currentThread()) {
                System.out.println("No " + t.getName());
                if (t.getName().equals("1")){
                    try {
                        t.sleep(1000); // in milliseconds
                    } catch (InterruptedException e) {}
                } else{
                    try {
                        t.sleep(250); // in milliseconds
                    } catch (InterruptedException e) {}
        }

  • Is it possible to run two appl in a single node

    Hi folks,
    Plz tell me if it is possible to run two applications in a single node,coz I had deployed one and it is running fine but when I am going to deploy and run another one it is showing that "503 service unavailable" in the browser after the deployment.
    cheers
    prasenjit

    Can you please explain below
    Why your are creating Two VO's for one Table.
    What is relation between this two VO's??
    Thanks,
    Dilip

  • HT204505 Can I pair two iphones with a single apple watch simultaneously?

    I was wondering if I can pair two iPhones with a single Apple Watch simultaneously.  I have a personal iPhone and a work iPhone, both of which I would like to pair with my single Apple Watch.  Thank you.

    No.  You would have to choose which one you pair.  Only one at a time.  Sorry.

  • Can I run two displays with my Macbook Pro?

    I have the early 2011 Macbook Pro, with the 256mb ram on the graphics card, and what I think was the first generation "Thunderbolt" video output. I'm currently running a single 27"Cinema Display using a mini-display port adaptor out. I'm wondering if there's a way to drive two monitors with it - say a Thunderbolt display and the current Cinema Display? What configuration of displays, adaptors, and/or cables would I need to do this?
    Thanks!

    I suggest reviewing information here:
    http://support.apple.com/kb/HT5219?viewlocale=en_US&locale=en_US
    in the sections:
    "Using the Apple Thunderbolt Display"  and
    "Using Mini DisplayPort displays or displays connecting with Mini DisplayPort adapters on Macs with Thunderbolt Ports:"

  • How to run two programs with one PC and two monitors

    Good Morning,
    I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
    For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
    Thanks in advance

    Hi Parker,
    yes, it's possible. You also have properties to set windows to specific monitors...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to run two files with same url-  urgent

    hi,
    i created two servlet page and both are working very fine.but at same time i only able to run one file with same url. Is possible to run two or more file at same time with same url name..
    if you r not understanding what i want to ask then, i have two file names under helloWeb directory
    1) helloWorld.java(servletname s1, url /man)
    2) helloWeb.java (servletname s2,url /man)
    to run - http://localhost:7001/helloWeb/man - it runs very first file which is added to deployment module.
    so i want to know how i can run both file with same url, for this what i have to pass on my address bar.
    plz help me i m wating
    <b></b>

    Hi,
    We can give same url mapping to both Servlets but we can access the servlet which is entered first in web.xml because whenever we send a request to the webserver then webserver look at the elements in web.xml file one by one.
    When it finds the corresponding url mapping then immediately sends the response to the client.The same url mapping for the next element will be ignored.
    I think there is no possibility to access both servlets with same url.
    Regards
    Anilkumar kari

  • Insert into two tables with a single query (same ID)

    Hello,
    I want to insert two tables at the same time ( with a single query) provided that both records get inserted with the same id. How do I do this?
    Table Movies
    id
    name
    Table Category
    movie_id
    cat_typea) Insert into first table, retrieve the id (may be by using my_sequence.currval and then insert into another table.
    issue: Makes three query to the db, I am also guessing that when multiple people try to insert there will be an issue, I might be wrong.
    I don't have any other idea.
    Greatly appreciated!

    Why don't use multitable insert ? It's available from 9i.
    A sequence.nextval will return the same value within the whole instruction
    so all records can be inserted with the same id.
    Look at this example:
    DROP TABLE A;
    DROP TABLE B;
    drop sequence a_seq;
    CREATE TABLE A(
      ID NUMBER,
      FIRSTNAME VARCHAR2(50)
    CREATE TABLE B AS
    SELECT id, firstname lastname FROM a;
    CREATE SEQUENCE a_seq
    START WITH 1;
    INSERT ALL
    INTO A(ID, FIRSTNAME) VALUES(A_SEQ.NEXTVAL, FNAME)
    INTO B(ID, LASTNAME) VALUES(A_SEQ.NEXTVAL, LNAME)
    SELECT 'fname ' || LEVEL FNAME, 'lname ' || LEVEL LNAME
    FROM DUAL
    CONNECT BY LEVEL < 10
    COMMIT;
    SELECT * FROM A;
    SELECT * FROM b;
    DROP TABLE A succeeded.
    DROP TABLE B succeeded.
    drop sequence a_seq succeeded.
    CREATE TABLE succeeded.
    CREATE TABLE succeeded.
    CREATE SEQUENCE succeeded.
    18 rows inserted
    commited
    ID                     FIRSTNAME                                         
    3                      fname 1                                           
    4                      fname 2                                           
    5                      fname 3                                           
    6                      fname 4                                           
    7                      fname 5                                           
    8                      fname 6                                           
    9                      fname 7                                           
    10                     fname 8                                           
    11                     fname 9                                           
    9 rows selected
    ID                     LASTNAME                                          
    3                      lname 1                                           
    4                      lname 2                                           
    5                      lname 3                                           
    6                      lname 4                                           
    7                      lname 5                                           
    8                      lname 6                                           
    9                      lname 7                                           
    10                     lname 8                                           
    11                     lname 9                                           
    9 rows selected

  • Run two displays with current Mac mini?

    Can two displays be run with the current mac mini? I would like to be able to have itunes open on one display while using the second for all other use. Thank you.

    The new Mac mini has two dispay ports, the mini-DVI and a mini-DisplayPort. You can attach a display to each port with the proper adapters. It also comes with a mini-DVI to DVI adapter.

  • Retina display macbook pro and want to run two monitors with only DVI connections

    I have a retina display macbook pro and want to run dual screens using two Yamakasi monitors with DVI connections what do I need to do this,

    Hello TonyLoan,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    For each display you want to use, connect a video cable (and adapter, if necessary)
    About Apple video adapters and cables
    http://support.apple.com/kb/ht3235
    Apple Mini DisplayPort to DVI Adapter
    Have a nice day,
    Mario

  • Anyone Running Two Macs with Logic?

    Just wondering how much time it saves and more power it gives...I have a Dual 2G and was thinking of one of the new Intels and using OSX's built in networking, with adat out of the second Mac back to my Fireface.
    I'm just trying to get a handle on how much help this would be to me, DSP wise, etc. I know I could put some of the VSL library on it, or whatever...
    I'm also a little confused about whether doing it like this is different than using the LOGIC node thing, and if so, which would help me more. I tend to use a lot of plug ins, some of which aren't LOGIC's.
    Thanks
    Tom

    X: Basically, Justin has given the info on LAN MIDI.Regarding the hardware route: just think of the slave computers as hardware synths,and you're near the mark. For example, on my DP 2.0 I run a single MOTU MIDI Express,giving me 8 ports.That is then connected to one of my AMT 8's.The only problem with that is V-Stack is capable of supporting 16x16,so to take full advantage, you'd have to double the number of MIDI interfaces.So,for that one computer alone you would require 4 MIDI interfaces. That's when hardware starts to become unwieldy. And expensive. I have five AMT/Unitors and a MOTU, but really don't wish to acquire more;so I'm going to take a look at MIDI over LAN. Maybe the answer is a hybrid configuration.
    Regarding getting the sound out. Each slave computer has a soundcard: in my case the excellent Hammerfalls. I take the ADATs out of those into the Quad's rig of MOTU's. The audio i/o's on each are freely configurable in both the Hammerfall's software and the V-Stack's/Kore's and all other standalone instruments. It's way, way more powerful and flexible than the node method.
    Hope this helps.

  • Simultaneously run two counters with the internal 80MHz timing

    Hi, I have a programming problem about the NI PCI-6602 counter card. I want to use the internal timing signal (80MHz) as the source signal and feed two external signals to the two counters. The operation mode is the Buffered Period Measurement.
    I can succeed in one counter programming by using these old DAQ functions calls in sequences:
        iStatus = GPCTR_Control(iDevice, ulGpctrNum, ND_RESET);
        iStatus = GPCTR_Set_Application(iDevice, ulGpctrNum, ND_BUFFERED_PERIOD_MSR);
        iStatus = GPCTR_Change_Parameter(iDevice, ulGpctrNum, ND_SOURCE, ND_INTERNAL_MAX_TIMEBASE);
        iStatus = GPCTR_Change_Parameter(iDevice, ulGpctrNum, ND_GATE, ND_PFI_38);
        iStatus = GPCTR_Change_Parameter(iDevice, ulGpctrNum, ND_INITIAL_COUNT, ulInitCount);
        iStatus = GPCTR_Change_Parameter(iDevice, ulGpctrNum, ND_BUFFER_MODE, ND_CONTINUOUS);    
        iStatus = GPCTR_Config_Buffer(iDevice, ulGpctrNum, 0, ulCount, pulBuffer); 
        iStatus = GPCTR_Control(iDevice, ulGpctrNum, ND_PROGRAM);
        while(RunStatus)
           iStatus = GPCTR_Read_Buffer (iDevice, ulGpctrNum, readMode, readOffSet, NumPtToRead, timeOut, &NumPtRead, buffer);
           m_Chart1.DoPlot(); // Plot the data
      iStatus = GPCTR_Control(iDevice, ulGpctrNum, ND_RESET);
    But when using two counters, I tried to open two individual counter tasks by just doubling the codes above (each counter has independent DMA buffer). The program hanged forever. After debugging, the codes stop after it comes to read the 2nd DMA buffer (the 2nd line below).
      iStatus = GPCTR_Read_Buffer (iDevice, ulGpctrNum0, readMode, readOffSet, NumPtToRead, timeOut, &NumPtRead0, buffer0);
      iStatus = GPCTR_Read_Buffer (iDevice, ulGpctrNum1, readMode, readOffSet, NumPtToRead, timeOut, &NumPtRead1, buffer1);
    I also tried to check the labview codes that I have for the implementation of 2 counter measurement. There are two sets of function calls for each counter, "Counter Group Configure" -->"Source Slection" --> "Gate Selection" --> "Buffer Configure", in the same sequence structure, and two "Buffer Read" calls in a later, but also the same, sequence structure. My C programming is done just by following the labview codes above. But the labview program doesn't crash like the C program. Besides, one more question that I found is that I cannot find the fundtion "Counter_Group_ConfigInterface" inside the C function library. I tried to use the function "CTR_Simul_Op" but failed.
    So, my problem is that what's the problem about my C codes and how can I do the two counter measurement by the same internal timing base. Sorry to put all the problem in such a mess. If you need more information about my codes or my experimental requirement, please let me know. Thank you for your help!
    Sincerely,
    Jung-Cheng

    Hi Pavani,
    Welcome to the forums!  As a new LabVIEW user there are many helpful resources out there to get you started.  I would like to point you to the two links in my signature.  The first is a six hour LabVIEW course and the second helps you learn DAQmx.  Also take advantage of the shipping examples.  When you open LabVIEW select Find Examples to open the Example Finder.  Assuming you are using DAQmx, you can go to Hardware Input and Output>>DAQmx>>Counter Measurements and find many useful example programs that either do what you want or can be modified to perform the task you desire.
    To answer you question, two counters in the same loop do not affect each other.  The counters will gather data separately.  By putting them in the same loop, you just perform the reads in software at the same time.
    Regards,
    Ima
    Applications Engineer
    National Instruments
    LabVIEW Introduction Course - Six Hours
    Getting Started with NI-DAQmx

  • Is it possible to install two SAP system with same SID but different instance numbers on one host?

    Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
    If yes, then how?
    If no, then why?
    Thanks in advance.
    Regards,
    Sarim

    Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
    Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
    If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
    The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
    The next issue will be with the SAP file systems like /sapmnt/SID
    The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
    These are few of the many problems I can think of.
    So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
    Regards
    RB

  • Lucreate fails with update 8 packages on system with zone

    I have a Solaris 10 update 7 system with a single zone. Before installing the update 8 LU packages I was able to create a new BE without error. After adding the packages, lucreate gives the following error:
    Creating clone for <rpool/ROOT/10u7ZFSa/zoneRoot/common@10u8> on <rpool/ROOT/10u8/zoneRoot/common-10u8>.
    cannot mount 'rpool/ROOT/10u8/zoneRoot/common-10u8': legacy mountpoint
    use mount(1M) to mount this filesystem
    ERROR: Failed to mount dataset <rpool/ROOT/10u8/zoneRoot/common-10u8>
    legacy is not an absolute path.
    WARNING: split filesystem </> file system type <zfs> cannot inherit
    mount point options <-> from parent filesystem </> file
    type <-> because the two file systems have different types.
    Any clues?

    Hi Ish68,
    It looks like the previous uninstallation didn't go through completely and that might cause conflict during the new installation. It is recommended to remove the program manually from Control Panel and if it still fails you can try to run the standalone uninstaller from F-secure. You can refer below link for the steps:
    Uninstallation steps :
    https://community.f-secure.com/t5/Security-for-PC/How-do-I-uninstall-the-product/ta-p/15384
    Installation steps for F-Secure SAFE :
    https://community.f-secure.com/t5/Security-for-PC/How-do-I-install-Internet/ta-p/43585
    Thank you.

  • Will the ATI Radeon 700 AGP card run two Studio 21 Displays?

    I just bought a G4 MDD 1.4 GHZ Mac that has what I assume was the stock video card, which appears to be for LCD displays, since the cables from my Apple 21" Studio displays (CRTs) don't match up to it (those are called VGA monitors, right?).
    On my present Mac (G4 Quicksilver) I am running both of these 21" Studio Displays, one plugged into the stock AGP card and the other connected to a PCI video card. As I prepare to switch over to my "new" MDD Mac now, I need to figure out how best to run the two monitors with this G4. (I will leave the video cards in the old Quicksilver and give it to a relative who also wants to run two monitors with it).
    I notice a new Radeon 7000 AGP card being offered on Ebay which has one VGA port, and they provide an adapter so that the second (DVI) port can also run a VGA monitor. If that card would run both my 21" Studio Displays independently as claimed, it would be the ideal solution, if the performance is adequate.
    I do lots of Photoshop(CS2)adjustment of digital camera images and also make video movies with Final Cut Express, iDVD, etc., with both monitors set to 1152 X 870 at 75 Hertz. Would such a card as this one be up to the task with both monitors?
    Every time I try to post the link to the Ebay auction for this card, everything in this text box disappears. So I'll just copy and paste the description of the card from the auction: "ATI Radeon 7000 64MB DDR Dual Monitor capable AGP Video Card with VGA, DVI-I, and S-Video Out and a DVI to VGA adapter. The video card has ATI's latest firmware (v226) with the latest ATI Displays support. It does not have any sleep issues. The card is capable of dual true independent/simultaneous monitor support with extended desktop. The adapter allows for dual VGA operation. This model has been tested in a G4 Tower, G4 Cube, and G5 with several versions of OS X including OS 10.4/Tiger. This card is guaranteed to work in any Macintosh G4 Tower, G4 Cube, or G5 Tower with OS 9.2.2 or later that has an available AGP slot."
    Sounds good---maybe too good to be true. Any drawbacks to such a setup as this?
    Any advice most appreciated.
    Tom

    Thanks for the info Malcolm. I checked out those links you provided, and it appears that buying two adapters for the presently-inistalled video card which would allow it to run two VGA monitors looks like a workable solution, all right. But it would be more expensive than just buying that Radeon AGP card to run both monitors, if the latter would work (that's what I'm still wondering).
    Also, I notice that the DVI to VGA adapter sold by Apple has some poor reviews and seems to have glitches. It is reported by several people to be unreliable and seems to turn a lot of displays magenta, and in other cases requires a lot of wiggling or careful positioning to make it work right. Sounds like Apple needs to work on the design.
    I appreciate the info, but I'm still favoring the Radeon 700 AGP card if someone can tell me it might work.
    As to which card my Mac has in it right now, I can't tell just by looking at it (why don't they put an identifying sticker or something on the things?) and I can't connect any of my VGA displays to it yet to let the Mac report what it has in it, so it's still a mystery.
    Thanks again,
    Tom

Maybe you are looking for