Runtime error in process model and sequence still passes

I am doing some custom initialization in the process model (in the ProcessSetup callback). I call a .NET module that may throw an exception under certain error conditions. This causes the the process model to jump to the Cleanup section of the process model (not the client sequence file cleanup) and that's okay. The problem I have is that in my UI I am getting the AxAppMgr_ExecutionEnded event and the e argument's exec.ResultStatus property indicates "Passed". I want it to indicate "Error" or "Incomplete" or something other than passed. The client sequence never ran at all. While it had no failures, it could not have passed.
How do I force the status to be "Error" or something other than "Passed"?
Solved!
Go to Solution.

Ryan,
I am just getting back to this. Thanks for the response.
I have my own sequence that gets called from ProcessSetup in the process model. That sequence sets up some station global variables for me including some Object References. One of the object references is a .NET object used to read a file. If that file does not exist, then the .NET object throws an exception which results in TestStand presenting a dialog with the error message and options about what to do next. I don't want our technicians getting that dialog box so I changed the Station Options to "Run Cleanup" on Run-time error. 
The process model jumps to its Cleanup section when the run-time error is received. 
Does that give you the information you need?
Incidentally, I am able to look at the e.exec.ErrorObject in the AxAppMgr_EndExecution event handler and I can see the error as suggested by Doug above.
Thanks.

Similar Messages

  • Registry Error: The user ID and password pair passed in a get_authToken mes

    Hello
    I am trying to publish web service thruth the UDDI CLINET
    I got into
    http://sap-xiqas:50000/uddiclient/process/
    chose Publish Service Definition
    SAP Registry
    and tried login with my user which has sap_all
    and also with j2ee_admin
    and get the following msg
    Registry Error: The user ID and password pair passed in a get_authToken message is not known to the Operator Site or is not valid
    have some1 managed to solve it ?
    thx Shai

    Hi,
    Use should use:
    call function 'SUSR_CHECK_LOGON_DATA'
              exporting AUTH_METHOD = 'P'
                        USERID      = k_user
                        PASSWORD    = k_senha
              exceptions
                   others = 1.
    if sy-subrc = 0.
       write 'Ok'.
    else.
       write 'Not Ok'.
    endif.
    Best regards,
    Leandro Mengue

  • Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03

    Hello everyone,
    I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
    In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
    Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
    Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
    Due to the error, we changed the settlement rule following these directions:
    1. Remove the settlement rules that we had so we can start anew.
    2. Choose the first line item and click on "Final Settlement".
    3. Enter the necessary settlement details (total should equal to 90,000 only).
    4. Go back and save.
    5. Choose the second line item and click on "Final Settlement".
    6. Enter the necessary settlement details (total should equal to 30,000).
    7. Go back and save.
    8. Then, check again the distribution rules set.
    Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
    I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
    Thanks in advance.
    Best regards,
    Peter

    hi,
    check in SAP OSS with the message number you get is there any SAP Notes tobe applied.

  • ORA-06510 Message error in Process Modeller Designer

    HI�
    I'M DAVE
    I HAVE SOME PROBLEMS USING DESIGNER 6i.
    I log on to Windows Designer tools then I open Process Modeller Tool and I try to modify the previuous model process but, when I add a new process in the previous PM1 SATISFY CUSTOMER ORDER diagram, the GUI for Process Modeller is crashed, and displays the next message: ORA-06510.
    I really don't know the reason. The error message manuals tells me I should answer to the DBA.
    ANY BODY CAN HELP ME?
    THANK YOU�
    DAVE
    [email protected]

    I have found this problem myself,
    the only workaround I found is to not run more that 5 mappings in parallel.
    I speculate that this is caused by the amount off cursors that are opened to run everything in parallel,
    If so, you might try to increase the parallel settings of your database.
    cheers
    Robbert

  • Runtime error R6034, itunesHelper.exe and the missing library MSVCR80.dll

    I made the mistake of upgrading to the new version of itunes and I appeared the following errors:
    - Runtime Error R6034 on ituneshelper.exe
    - Library MSVCR80.dll not found
    - Error 7 (windows error 126)
      I tried to install and uninstall as they say apple forums, I researched on my own restoring records, and review it with MicrosoftFixit which is also a solution to the problem but none of the options mentioned above solves the problem. I'm about to format my pc, but I read it in 3 forums that solution does not help. Lords of apple, what's going on with you? Sorry forgot to mention that since I restored settings to my pc that was 1 month ago and nothing happened.
    I have windows XP
    250 gb hard disk
    1 gb RAM
    Thanks

    first disable your antivirus (you can re-enable later)
    go to start, right click on computer and choose properties - note if you have 64 bit or 32 bit operating system
    then make sure all users on the computer are logged off
    log into admin user (if yours isn't already one)
    then uninstall in this order
    itunes
    apple software update
    apple mobile device support (if it won't go - support.microsoft.com/fixit - skip step 1 and go to step 2 - click install or upgrade software or hardware - then scroll down to the bottom of step 3 and click run now next to Fix problems that programs cannot be installed or uninstalled - basically tell it you want to manually tell it want you wantto do and then choose to uninstall and choose apple mobile device - if it freezes or stops around the end then just quit it and relaunch control panel and the apple mobile device should be gone)
    then continue to remove
    bonjour
    apple application support
    then restart computer
    click start - left click on computer - double click on c drive
    double click on program files
    make sure the itunes, ipod, and bonjour folders are gone - if they aren't select them, then right click and delete
    if you are on 64 bit
    complete the steps for program files and then also do program files x86
    if you had to delete any of those folders manually restart again afterwards
    for 32bit os - go to www.apple.com/itunes and download new itunes
    for 64bit os - support.apple.com/kb/DL1615 and download the 64bit version of itunes for windows
    this will resolve any issues related to the update
    NOTE - this will not touch your playlists or media files - your songs are not saved in the itunes application itself those are in a different folder in your music folder

  • Error in process chain - AND

    Hi Experts,
    I am facing problem in process chain execution in the AND node. The error is
    This AND process is not waiting for event RSPROCESS, parameter 4941U4Q6QKIR8RFKMAZWYP5JB
    I checked the log in ST22 but there is nothing , also no error msg in display msg or maintain variant.
    is there any solution?

    Hi Soniya.....
    The problem is due to the successor process is not activated, again try to
    activate the process chain and schedule it.........
    As a work around.........if instance and variant is already generated........then continue the process chain using the program : RSPC_PROCESS_FINISH.......
    otherwise copy the rest of the chain and execute............To do this open the chain using RSPC1>> in the top where we write tcode.........there write COPY.........Give a name to the new chain.....remove all the processes till AND process...........then create a new Start process..........make the start condition as immediate..........and schedule the chain...
    Hope this helps......
    Regards,
    Debjani.......

  • PI Control Error Between Process Variable and Set Point

    I've developed a PI program that uses measurements from a pressure transducer as the process variable to control air pressure released from a motorized valve. The program works great at lower pressures, but as the set point pressure increases the error between the process variable and set point increases. I've tried several things....adjusting the P seems to initially increase the overshoot but the process variable always settles down below the set point....tried adjusting the EGU min and max values but no real pattern develops with this. It appears as the process variable get closer to the max EGU value of 70000 pascals the error increases.
    I've attached three screen shots showing the process variable curve and setpoint value. The graph of interest is the one in the upper right hand corner.
    Any recommendation or advice would be appreciated.
    tks, Terry
    Attachments:
    Low Pressure.JPG ‏267 KB
    High Pressure.JPG ‏398 KB
    Mid Pressure.JPG ‏266 KB

    Kyle,
    First off....I appreciate your comments. No...there is no value is system represented as U16.
    Actually errors start to develop quite a bit before the maximum. If you look at the mid pressure.jpg file you'll notice that the set point (~28125 Pascals) and process variable (~25625 Pascals) are roughly off by about 2500 Pascals. Then if you look at the high pressure.jpg file you'll notice that the set point (~53000 Pascals) and process variable (~45500 Pascals) are roughly off by about 7500 Pascals. Therefore it appears as the setpoint pressure increases towards maximum the error tends to increase.
    I was curious about something....the set point value I'm inputting into the PID.VI , shown in the high pressure.jpg file, is from EGU to percent.VI. It would look exactly like the EGU to percent VI feeding the process variable input of the PID.VI with the set point value feeding the EGU to percent.VI input. Would I be better off feeding the actual set point value to the PID.VI input instead of percentage?
    Thanks, Terry

  • Error while using trigger and sequences

    hi friends
    i am leraning oracle now. i have confronted a difficulty while working with triggers and sequence . iF anybody knows this problem ,please help me
    i created atable with the specifications given below
    CREATE TABLE TESTSEQ
    idno NUMERIC(10),
    data1 VARCHAR2(50)
    and i created a sequence named seqcol1
    CREATE SEQUENCE seqcol1
    MINVALUE 1
    MAXVALUE 100
    START WITH 1
    INCREMENT BY 1
    CACHE 20;
    I created a trigger also named
    CREATE OR REPLACE TRIGGER trigADD2
    BEFORE
    INSERT ON TESTSEQ
    FOR EACH ROW
    BEGIN
    SELECT seqcol.NEXTVAL INTO idno;
    END;
    My plan is to add the idno automatically from sequence while inserting a value in data1 column
    while doing insert operation ,
    INSERT INTO TESTSEQ (data1) VALUES ('ram1')
    some error is showing
    the error is SCOTT.trigADD2 is invalid and failed re-validation
    if anybody can help me please help me
    thanks and regards

    ops$oskar@test9i$ create table t (n number, s varchar2(1));
    Table created.
    ops$oskar@test9i$ create sequence s;
    Sequence created.
    ops$oskar@test9i$ insert into t values (s.nextval,'X');
    1 row created.
    ops$oskar@test9i$ insert into t values (s.nextval,'Y');
    1 row created.
    ops$oskar@test9i$ insert into t values (s.nextval,'Z');
    1 row created.
    ops$oskar@test9i$ select * from t;
             N S
             1 X
             2 Y
             3 ZWhat do you need a trigger for?

  • SAP XI and Business Process Modelling and Monitoring

    hi All,
    Could anybody tell me whether SAP XI has any Business Process Modelling tools or any Process Monitoring tools?
    If any, are these analogous to IBM WBIs Modeller and Monitor? Also does SAP XI provide any human interaction?
    Regards,
    Shree Norway

    Hi,
    In the XI-Repository you can build Business Procces with the Process Builder.
    for Monitoring you can use the Workflow Monitoring on XI.
    See also Transaction "SXMB_MONI_BPE"
    Regards,
    Robin

  • Business Process Modeling and Organizational Change Management

    Many Change Management interventions are based on the business understanding the TO BE processes, how the process will change end-to-end, including not only the processes within SAP but also how they will interface with the entire application landscape. I’d like to hear experiences and best practices. Who, how and when should those business process models be completed? What would be the role of Change Management in this piece?

    Hi Claudia
    Very interesting question!. This is the most challenging task an org unit is facing today. Before implementation you must be able to foresee what impact a new end to end business process would have on the present organizational set up. To visualize you need to have people who has knowledge in their respective business. It is no easy task. That is why you need to break & analyse each process in minute detail and compare “to be process” with the present process. To have an effective process in place you have to examine who is the Business process owner, if the owner does not follow or comply with the new process what is the risk involved, & what makes it mandatory that the process owner follows it and so is all down the line managers. What I mean to say is that by analyzing each and every new process you should be able to derive some KPI from this. This is how control can be built. This is all simple management technique but I have seen many new processes in ERP failing or not being used because of lack of Management control. I have answered who & how part. Now coming back to when part. The change management initiative has to start long before the actual ERP implementation. One has to prepare the organisation for taking a massive leap from a mere paper based organisation to accepting a system that can touch almost any business application. An organisation which has not prepared itself to accept the changes and hurriedly implements a system for the sake of project completion can see that the benefits projected in the business case may never be realized.
    Reward points if found useful
    Regards
    Alok Sengupta

  • Runtime Error while Upgrading patches and while installing Add-ons

    Hi,
    I got this error message when i tried to install XL reporter(SAP Addon) addon and i was using the patch 05. I thought it was some problem with the addon and tried to install other add-ons like outlook integeration(SAP add-on) and TDS (Partner Addon). But i have received the same error message.
    RunTime Error!
    Program:C..
    This application as requested the Runtime to terminate it in an unusal way.
    Please contact the applications support team for more information
    Followed by this message also,
    The exception unknown software exception (0X40000015) occured in the application at the location 0X7813461a.
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    One of my implementation consultant suggested me to upgrade the patch to 35. So when i tried upgrading the patch level i have received the same error message.
    I have enclosed version details about the software details,
    Windows installer Version : 3.1.4000.4042
    .Net Framework Version : 2.0.50727.42
    Operating System : Windows 2003 Server (5.2.3790)
    MS. C++ Redistributable : Installed (MS.C++ 2005 Redistributable)
    RAM Availability : 1GB
    SQL Server : MS SQL 2005 Server (9.00.1399.00)
    Please help me out with this
    Regrards,
    Vinoth Kumar

    Dear Vinoth,
        Similar problem was faced by me also.I uninstall the whole SAP  Setup .After that Delete SAP folder from Program files where u installed it.
    Also in START->RUN->%temp%
    Rename the folder "SM_OBS_DLL" to any name you want.
    Then install SBO setup and then addon.
    Try this it will work.
    Gauraw

  • Runtime error after successful compile and link with cl.exe

    Finally, got the configuration for cl.exe and link.exe right and got a successful compile and link to produce a dll. Then ran the main method of my Java class. The main method calls the constructor, and loading the class runs the static block which loads the native dll. I get one of those error files of the type hs_err_pid4064.log. The file is as follows:
    # An unexpected error has been detected by Java Runtime Environment:
    # Internal Error (0xe06d7363), pid=4064, tid=3576
    # Java VM: Java HotSpot(TM) Client VM (10.0-b22 mixed mode, sharing windows-x86)
    # Problematic frame:
    # C [kernel32.dll+0x12aeb]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    --------------- T H R E A D ---------------
    Current thread (0x00395800): JavaThread "main" [_thread_in_native, id=3576, stack(0x003b0000,0x00400000)]
    siginfo: ExceptionCode=0xe06d7363, ExceptionInformation=0x19930520 0x003fdf14 0x02de7b04
    Registers:
    EAX=0x003fde4c, EBX=0x00000000, ECX=0x00000000, EDX=0x02f80600
    ESP=0x003fde48, EBP=0x003fde9c, ESI=0x003fdedc, EDI=0x003fdedc
    EIP=0x7c812aeb, EFLAGS=0x00000206
    Top of Stack: (sp=0x003fde48)
    0x003fde48: 02de1de0 e06d7363 00000001 00000000
    0x003fde58: 7c812aeb 00000003 19930520 003fdf14
    0x003fde68: 02de7b04 02e80087 003fdf14 003fdf28
    0x003fde78: 02e99500 00000039 003fde70 00000039
    0x003fde88: 003fdec8 02e81a50 02eabf00 003fdf14
    0x003fde98: 003fdf28 003fdedc 02dce583 e06d7363
    0x003fdea8: 00000001 00000003 003fded0 02a72388
    0x003fdeb8: 00000000 e06d7363 00000001 00000000
    Instructions: (pc=0x7c812aeb)
    0x7c812adb: 8d 7d c4 f3 a5 5f 8d 45 b0 50 ff 15 10 15 80 7c
    0x7c812aeb: 5e c9 c2 10 00 85 ff 0f 8e 36 93 ff ff 8b 55 fc
    Stack: [0x003b0000,0x00400000], sp=0x003fde48, free space=311k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [kernel32.dll+0x12aeb]
    C [summarizer37.dll+0x1e583]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::Interpreter
    v ~BufferBlob::StubRoutines (1)
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x02a66000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3108, stack(0x02d10000,0x02d60000)]
    0x02a58000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2488, stack(0x02cc0000,0x02d10000)]
    0x02a56c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=2508, stack(0x02c70000,0x02cc0000)]
    0x02a56000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3720, stack(0x02c20000,0x02c70000)]
    0x02a51800 JavaThread "Finalizer" daemon [_thread_blocked, id=2968, stack(0x02bd0000,0x02c20000)]
    0x02a4d400 JavaThread "Reference Handler" daemon [_thread_blocked, id=600, stack(0x02b80000,0x02bd0000)]
    =>0x00395800 JavaThread "main" [_thread_in_native, id=3576, stack(0x003b0000,0x00400000)]
    Other Threads:
    0x02a4c000 VMThread [stack: 0x02b30000,0x02b80000] [id=2528]
    0x02a67000 WatcherThread [stack: 0x02d60000,0x02db0000] [id=1604]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 960K, used 195K [0x22960000, 0x22a60000, 0x22e40000)
    eden space 896K, 21% used [0x22960000, 0x22990c38, 0x22a40000)
    from space 64K, 0% used [0x22a40000, 0x22a40000, 0x22a50000)
    to space 64K, 0% used [0x22a50000, 0x22a50000, 0x22a60000)
    tenured generation total 4096K, used 0K [0x22e40000, 0x23240000, 0x26960000)
    the space 4096K, 0% used [0x22e40000, 0x22e40000, 0x22e40200, 0x23240000)
    compacting perm gen total 12288K, used 22K [0x26960000, 0x27560000, 0x2a960000)
    the space 12288K, 0% used [0x26960000, 0x269658c8, 0x26965a00, 0x27560000)
    ro space 8192K, 66% used [0x2a960000, 0x2aeb0e10, 0x2aeb1000, 0x2b160000)
    rw space 12288K, 52% used [0x2b160000, 0x2b7b04c8, 0x2b7b0600, 0x2bd60000)
    Dynamic libraries:
    0x00400000 - 0x00423000      C:\Program Files\Java\jdk1.6.0_06\bin\javaw.exe
    0x7c900000 - 0x7c9af000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f6000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x7e410000 - 0x7e4a1000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f59000      C:\WINDOWS\system32\GDI32.dll
    0x7c340000 - 0x7c396000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\msvcr71.dll
    0x6d870000 - 0x6dac0000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\client\jvm.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d320000 - 0x6d328000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d820000 - 0x6d82c000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\verify.dll
    0x6d3c0000 - 0x6d3df000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\java.dll
    0x6d860000 - 0x6d86f000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\zip.dll
    0x10000000 - 0x10006000      D:\Servers\SummarizerServer\native\jsummarizer.dll
    0x02db0000 - 0x02df2000      D:\Servers\SummarizerServer\native\summarizer37.dll
    0x02e00000 - 0x02f6d000      D:\Servers\SummarizerServer\native\platform37.dll
    0x4a800000 - 0x4a893000      D:\Servers\SummarizerServer\native\icuuc30.dll
    0x4ad00000 - 0x4b52d000      D:\Servers\SummarizerServer\native\icudt30.dll
    0x5b860000 - 0x5b8b5000      C:\WINDOWS\system32\NETAPI32.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
    VM Arguments:
    jvm_args: -Djava.library.path=native
    java_command: com.sra.pipeline.servers.summarizer.JSummarizer
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=C:\Program Files\Java\jdk1.6.0_06
    CLASSPATH=.;C:\Program Files\Java\jre1.6.0_06\lib\ext\QTJava.zip
    PATH=D:\Servers\SummarizerServer\native;C:\Program Files\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT
    USERNAME=Jim Jones
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 3
    CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 1048032k(245796k free), swap 2521804k(1060880k free)
    vm_info: Java HotSpot(TM) Client VM (10.0-b22) for windows-x86 JRE (1.6.0_06-b02), built on Mar 25 2008 01:22:05 by "java_re" with MS VC++ 7.1
    time: Mon Sep 01 15:22:10 2008
    elapsed time: 0 seconds
    The dll I'm wrapping is C++ VC++ compiled.
    Would like to know what I do to trouble-shoot this error and hope to fix it?
    Jim

    Using Java print statement was able to show that the my JNI dll was being loaded and that the problem was in the first call to one of my JNI functions. Then by using "DebugBreak()" in that function and gradually moving it down line by line through the function was able to isolate the line causing the problem. Unfortunately it is the line where I call a function from the dll I'm wrapping. See newer thread.

  • Intermittent report file write error in process model

    Hello,
    We have recently seen a couple errors we have not seen before, that are intermittent.   This occurs in the single pass entry point sequence, the first "write UUT report" step (the non-on-the-fly one).  The error message is as follows:
    "An error occurred calling 'Save' in 'Report' of 'NI TestStand API 4.0'
    A file with the pathname 'T:\HTC' already exists.. Error writing to file 'T:\HTC\WING\3WWE\StressTest.seq\StressTest_Report[NO_UUT_SERIAL_NUM13][3 23 37 PM][4 28 2008] - TS2.html'."
    So when breaking here, and looking at Locals.ReportFilePath (which is the pointed to variable in the specifiy module of this step), it was indeed defined as:
    T:\HTC\WING\3WWE\StressTest.seq\StressTest_Report[NO_UUT_SERIAL_NUM13][3 23 37 PM][4 28 2008] - TS2.html
    So everything looks correct, but it thinks that "T:\HTC" is the entire path.  So the next thing I did, after much confused pondering, was go to the "variables" tab while in break, and add an extra backslash to the part following "T:\HTC" in Locals.ReportFilePath so that the path is now:
    T:\HTC\\WING\3WWE\StressTest.seq\StressTest_Report[NO_UUT_SERIAL_NUM13][3 23 37 PM][4 28 2008] - TS2.html
    I hit retry and it worked.  So my question is, if teststand is thinking the "\W" is an escape code, why does it work 99%+ of the time, and suddenly this weird problem? 
    Thanks

    "A file with the pathname 'T:\HTC' already exists."
    This error indicates that there was a file called "T:\HTC" so the report saving code was not able to create a directory with that name. I doubt this has anything to do with backslash escaping anything since there is no expression evaluation involved and \W is not a valid backslash escapable character anyway.
    Why you had a file called HTC I do not know, but I looked and that is what this error is for. The Report saving code attempts to create all of the intermediate directories if they do not already exist and if one happens to exist, but is a file and not a directory you will get this error (it is the error we get from the operating system). It is possible there is a issue with the OS where it incorrectly reports this error in some cases (perhaps with multithreaded access), but that I do not know for certain.
    In searching for known OS issues I found the following:
    http://support.microsoft.com/kb/q268897/
    "On the other hand, an attempt to create a new C:\Development\Bin folder through the use of CreateDirectory() will fail with "ERROR_ALREADY_EXISTS". In this case, the API fails when it should succeed."
    Although it does sound like it was fixed in a service pack. Are you by any chance using NTFS on Windows 2000 and are not up to date with the lastest service pack?
    Also it's possibly an unknown OS bug, what OS version are you using and can you reproduce the problem in a simple case?
    Also, just to be sure you might want to make sure nothing is creating a file called 'T:\HTC' in your code.
    Hope this helps.
    -Doug
    Message Edited by dug9000 on 04-30-2008 10:58 AM

  • Error in processing Dimension and Application

    Hi Experts,
    When I am trying to process the Dimension or Application it is saying "ActiveX component can not be created".
    Can anyone please suggest the solution.
    Regards,
    Prakash

    Try to see if you have the same problem into Apshell.
    If you don't have this issue into apshell then the problem it is not related to installation it is related to your appset.
    If it is working into apshell then please check into table tblappsetinfo from database appserver if youo ahve exactly the right information like for apshell.
    If it is not working for apshell then check if reporting services is working fine:
    http//"yourappserver"/reports should be loaded without errors. and also check note: 1131320
    Regards
    Sorin Radulescu

  • Versioning of BPMN Process Models and Change Management

    Hi all,
    Can any of you please provide insight on how can we do the following change management activities?
    1. Version Control of BPMN Models synchronized with the change management activities
    2. In the Help documentation, two roles called Improvement Manager and Modeler were mentioned. How do we define their roles in the Administration? In User Management I see only one function privilege "Change Management" and both Improvement Manager and Modeller will have this privilege. Than how they are distinguished in their roles?
    3. Does it also support a work flow and notification mechanism?
    Thanks in anticipation.
    Best regards,
    Raja Mohan

    Hi,
    I'd just like to add some quick points that you need to consider:
    Implicit version control is not supported in the current release (10.1.3.4) but it will be supported in Release 11 (upcoming release). There are some workarounds/alternatives like attributes (Status, Since/on, Released on, Released by, Release) and external version control system combined with the XML import/export functionality (Re: Control Version
    The Change Management can be used to describe upcoming modeling tasks within the Business Process Architect. This implicates changes from IT, adding new objects, adjustments of models or control flow, etc... Especially it is suitable to document suggestions for future model improvements.
    "Does it also support a work flow and notification mechanism?"I think this might be a governance topic that has to be created on your own.
    Hope it helps,
    Danilo

Maybe you are looking for