Runtime error in Proxy

Hi All,
Am getting an error when running my interface from SPROXY (its an outbound interface).
The error says " Runtime (Serialize) 866 (execute) (serialize)". This error is coming after the complete execution of the interface.
I am passing the values to a structure of an outbound proxy from my inbound proxy. When I executed the outbound proxy separately, its working fine.
The values are getting passed properly. One guess was this proxy was in inactive stage when i opened recently and I activated the same. The structure remains the same.
Regards
RK

Hi Manish,
Thanks for your response. I did re-generated it and activated it .. initially after seeing that its inactive and everything looked fine..
The interesting part is I am able to see the output properly in the Response tab but the same isn't sent to PI ..
Pls advice
Regards
RK

Similar Messages

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

Proxy Runtime error

Hello..
In FILE-XI-BW scenario... I'm getting error in adapter monitoring (integration engine --> Proxy runtime )
Error is.. "Unable to log on to system D03 (BW system) in language en with user XIRWBUSER...
Can any one tell me what might be the problem..
Thanks..

Hi Padma
Can you check your configuration Tab in Runtime workbench. If there also you are getting this same error.
Create a port in your business system using Tcode : we21.
Also have you set in your proxy System the destination to Integration Server?
If not:
Goto sxmb_adm -> Integration Engine configuration -> Role of Business System = Application System with corresponding integration server dest//RFCdestinatio2yourIntegrationServer.
Best Regards
- lalit -

Integration Engine Proxy Runtime Error

Hello,
I have ECC and PI server for my landsacpe. When i ran SXMB_IFR tcode in my ECC server i got the follwing error under Runtime work Bench
Proxy Runtime - it is shows red color.
Unable to log on to system ECC120 in language en with user PIRWBUSER
Details for Ping Status
Message: Unable to log on to system ECD210 in language en with user PIRWBUSER
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system ECD210 in language en with user PIRWBUSER
at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1229621978943._jspService(jsp_FC_Secure1229621978943.java:15)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
When i checked my PIRWBUSER password in abap and poratal level there is no conflicts. Password is correct.
For integration i have created three RFC also
LCRSAPRFC,SLDAPIRFC,SAPJ2EE all these RFC are working fine and there is no error.
Can any one suggest me how to resolve this issue.
I am waiting for your reply.
Regards,
Sankaranarayanan.G
BASIS CONSULTANT

Hi Tuhin,
I have one more problem now. Intially i have configured my PI development portal.But after some days in my PI server when i ran SXMB_IFR is detecting wrong poral now. I have tried to change from my EXCHANGE Profile under integratrion server parameters i have changed PORT,URL and others.
but it is not come to effect. can you please help me where do i need to chage the portal?
I am waiting for your reply.
Regards,
Sankar.G

Powershell Error for SharePoint Online -"The remote server returned an error: (407) Proxy Authentication Required."

I am trying to call sharepoint online from powershell. Below is the code. I get
Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required."
$loadInfo1 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
$loadInfo2 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
$webUrl = "ZZZZ"
$username = "XXX"
$password = "YYYY"
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
$ctx.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$web = $ctx.Web
$lists = $web.Lists
$ctx.Load($lists)
$ctx.ExecuteQuery()
$lists| select -Property Title
Raj-Shpt

Hi,
About how to access SharePoint online site using PowerShell, the blog below would be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/29518.csom-sharepoint-powershell-reference-and-example-codes.aspx
Another two demos for your reference:
http://www.hartsteve.com/2013/06/sharepoint-online-powershell/
http://www.sharepointnutsandbolts.com/2013/12/Using-CSOM-in-PowerShell-scripts-with-Office365.html
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Portal runtime error while trying to run a MSS report

Hello gurus!!
   I setup the MSS reports launchpad and now I am seeing all the list of reports on the reports launchpad. I am able to click on all the links and each link opens up the relevant page and the selection criteria also comes up. However, on the last screen, I get a portal runtime error after I click on the report result button.
The trace file shows the following errors:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[17, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.16.trc]/>
<!NEXTFILE[defaultTrace.18.trc]/>
<!LOGHEADER[END]/>
#1.5 #0050568444360067000005D2000005D400049F27DC8DD843#1300893459438#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SSUBBARAO#113523##n/a##ae3b7a53556011e0cd95000000191d7e#SAPEngine_Application_Thread[impl:3]_23##0#0#Fatal#1#/Applications/Xss#Java###null
[EXCEPTION]
#1#com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Exception condition "PROFILE_NOT_INITIALIZED" raised., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.record.blc.RfcManager.rfcExecute(RfcManager.java:453)
     at com.sap.xss.hr.cat.record.blc.RfcManager.init(RfcManager.java:820)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalRfcManager.init(InternalRfcManager.java:280)
     at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.onInit(FcCatRecordInterface.java:353)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface.onInit(InternalFcCatRecordInterface.java:268)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface$External.onInit(InternalFcCatRecordInterface.java:542)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendar.onInit(VcCatCalendar.java:251)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendar.onInit(InternalVcCatCalendar.java:194)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarInterface.onInit(VcCatCalendarInterface.java:162)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface.onInit(InternalVcCatCalendarInterface.java:146)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface$External.onInit(InternalVcCatCalendarInterface.java:222)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1346)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:867)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Exception condition "PROFILE_NOT_INITIALIZED" raised., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.cat.general.model.slim.CatsModelSlim.hrxss_Cat_Wd_Record(CatsModelSlim.java:245)
     at com.sap.xss.hr.cat.general.model.slim.Hrxss_Cat_Wd_Record_Input.doExecute(Hrxss_Cat_Wd_Record_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more
Could anybody please guide me how to fix this error and get the reports working properly?
Any help with this is much appreciated.
Thank you!
~Maria Kutty~

Hi,
Please refer to note 878440.
Thanks
Prashant

Catch CONVT_NO_NUMBER runtime error in OO ABAP Program

Hi all,
       In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump. I noticed that this error cannot be caught by CX_ROOT exception class.
       Some told me I can use the CATCH SYSTEM-EXCEPTIONS sentence to catch this runtime error, but it is a old-way syntax and cannot be used with the "try" and "catch".
       So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
You are not checking for conversion.
You are checking ofr logical expression.
Try below code, it works
DATA error_ref TYPE REF TO cx_sy_conversion_no_number.
DATA err_text TYPE string.
DATA a TYPE i.
TRY.
    MOVE 'A' TO a.
CATCH cx_sy_conversion_no_number INTO error_ref.
    err_text = error_ref->get_text( ).
    WRITE err_text.
ENDTRY.
Regards,
Atish

C++ Runtime error on Rfc_Read_Table

Hi,
I got C++ Runtime Error on RFC_Read_Table. The following is the error message:
"Program:
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
The connection was opened fine but I got this error when I am trying to read the table. I would appreciate if anyone can tell me how I can solve this problem.
Thank you in advance,
Sunny

>Do you think regenerating the code for Rfc_Read_Table using the new system will solve this problem?
Yes. Most likely you generated the proxy on a non-Unicode system and the ERP 2004 that causes the crash is Unicode.
You can easily see this when you open the generated proxy code and look into the RfcParameter and RfcField custom attributes. If they don't contain Length2 and Offeset2 parameters, but only Length and Offset, this error will happen on Unicode system.
Regenerating the proxy with the new system makes the proxy work with both Unicode and non-Unicode system and should work the same with older system. If you want to be sure, Windiff the new proxies with the old ones. They should be identical except the Lenght2 and Offset2 parameters.

Runtime Error-Description of Exception in Moni with Checked Flag

Hi Floks,
I am working on one interface ABAP proxy to File.While Executing the interface i am getting checked Flag in the Moni but when i double clicked on it.Its Displaying an error message.The error message is displaying like *Runtime Error-Description of Exception*
*Under that the Short text is The Current application Triggered a termination with a Short Dump*.But I am getting the proper Out put.
Please do needfull help on this.
Regards,
sai

Hi,
In error analysis iam getting this can u
Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Long text of error message:
     Diagnosis
         An error occurred when the system tried to process the comma
         from the Automation Queue on the presentation server.
         There are several possible reasons for this:
         - The installation of the SAP GUI on the presentation server
         faulty or obsolete.
         - There is an error in the application program
         - There is an error in the SAPGUI or an integrated control
     Procedure
         1. Make sure that you have imported the appropriate Support
         Package, the current kernel, and GUI patch for the release o
         system
         2. Check whether the error occurs locally on one or a few PC
         generally on all PCs. Note whether the error only occurs for
         users, for example because of a specific Customizing setting
         If it only occurs locally, this suggests an installation pro
         with the PC. Check the installation; if necessary, reinstall
         software. In the dump, search for the SY-MSGLI field, since
         point to the cause of the error.
         3. Activate the Automation Trace (in accordance with SAP Not
         158985).
         4.Start the transaction and continue until the screen immedi
         before the dump.
         5. From the System -> Utilities menu, choose Autom. Queue,
                  Synchronous Processing.
         The status bar of the GUI displays the text:
            "Automation synchron flush mode on"
         6. If you now proceed with the application, the short dump will
         display the ABAP call that caused the error; the Automation Trace
         will contain the error on the presentation server.
         7. If necessary, load the short dump and trace files on to
         sapservX, so that SAP can analyze them.
    Technical information about the message:
    Message class....... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
this message i am getting so can u plazzzzz

ESS/Portal runtime error

HI
As we enter into ESS Career and job we find Candidate Profile ,Data Overview, Profile release. In jobs we have Applications Apply Directly,Favorites,Search for Jobs.and personal settings.
All the services are showing the erroe as
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 11:34_17/07/09_0035_7567350
Refer to the log file for details about this exception.
Can any one help me out from this.
This is periority issue.
thanks
Regards
Micheal

HI
Here is the default trace file
Index:0,size
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:539)
     at java.util.ArrayList.get(ArrayList.java:356)
     at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:268)
     at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
     at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2549)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
     at com.sap.tc.webdynpro.progmodel.context.Node.setLeadSelection(Node.java:753)
     at com.sap.xss.hr.lea.form.FcForm.setLeadSelectionForSubtype(FcForm.java:719)
     at com.sap.xss.hr.lea.form.FcForm.setVisibility(FcForm.java:962)
     at com.sap.xss.hr.lea.form.FcForm.prepareCommand(FcForm.java:321)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.prepareCommand(InternalFcForm.java:2042)
     at com.sap.xss.hr.lea.form.FcFormInterface.prepareCommand(FcFormInterface.java:116)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.prepareCommand(InternalFcFormInterface.java:1887)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.prepareCommand(InternalFcFormInterface.java:1983)
     at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:299)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:1084)
     at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:204)
     at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:280)
and all the roles are assigned.
How can i solve the issue..

DYNAMIC_CALL_FAILURE - Error in Proxy Inbound

Dear Experts,
this is my Scenario...
Legacy System                                            SAP ECC
============                                           =======
Web Service synchronous         -
>         Proxy synchronous.
sometimes I have this error (NOT Always): in SAP PI:
"Error during proxy processing Message E MC 601 cannot be processed in plugin mode HTTP"...
MC 601 = mc(601) -> "Object requested is currently locked by user &"..........
the same error in the Runtimer Workbench:
Error Category     : ABAP
Error Code          : DYNAMIC_CALL_FAILURE
Message Type   : S
User                   : PIAFUSER
this error occurs sometimes... not always..
when I get this error, resend the message and it WORKS fine...
I can't recreate the error, I don't know the cause of this.. and less how to repair.
Thanks in advance.
Regards.

I have checked the ST22, and there is nothing....
executed the web service with the SOAPUI... and this is the error...
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIProxy:DYNAMIC_CALL_FAILURE:
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:456)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
may br it could help..
thanks.

BEA-380000: General runtime error: Read channel closed - intermittent

I am encountering this error code intermittently. My production has been live from past 20 months and I see this error very recently and its like once a week.
I doubt if this has something to do with the network and as this is very generic error(BEA-380000) I am not able to find any pointers on this error.
My environment
Solaris 10,Weblogic 10.3(Not clustered)
fault="<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382500</con:errorCode>
<con:reason>OSB Service Callout action received SOAP Fault response</con:reason>
<con:details>
<con1:ReceivedFaultDetail xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config">
<con1:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</con1:faultcode>
<con1:faultstring>BEA-380000: General runtime error: Read channel closed</con1:faultstring>
<con1:detail>
<con:fault>
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: Read channel closed</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</con1:detail>
</con1:ReceivedFaultDetail>
</con:details>
<con:location>
<con:node>PipelinePairNode1</con:node>
<con:pipeline>PipelinePairNode1_request</con:pipeline>
<con:stage>stage1</con:stage>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>"
Cheers
Sridhar

Matt,
How are you invoking local proxy from HTTP proxy (using route node or service callout)? Is local proxy calling another proxy/business service? Do you have fault handling implemented?
Can you also check server log to figure out any additional error information (like stacktrace)?
Regards,
Anuj

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

Runtime error in Proxy

Similar Messages

Maybe you are looking for