Runtime Error in Transformation

Hi guys, I get the following error whenever I want to do a transformation from my DSO
"MESSAGE_TYPE_X"

Hi,
The Error message is general message. If this message comes during data load through transformation that means either some problem in mapping or Transformation is not active.
Regards,
Kams

Similar Messages

Runtime error in transform activity

I am getting the following error when doing a transform. Even if I have a simple string to string mapping I am facing this error. Please help
<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>env:Server</faultcode>
<faultstring>ORABPEL-09500 XPath expression failed to execute. Error while processing xpath expression, the expression is "ora:processXSLT('Transformation_8.xsl',bpws:getVariableData('inputVariable'))", the reason is FOTY0001: type error. Please verify the xpath query. </faultstring>
</Fault>

If i look at this topic :
Re: CatchAll does not catch exception in ora:translateFromNative
your .xsl file is at the correct location?

Error in Transformation Rules - Runtime Error

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Hi Rajesh,
Why don't you debug that program.
You can go to his program : GP4808B5A4QZRB6KTPVU57SZ98Z 3542
How :
1. tcode : se38
2. type : GP4808B5A4QZRB6KTPVU57SZ98Z 3542
3. Set highlight there,
Then setup with debug mode, finnaly you execute the dtp.
And watch carefully, in what part you get an error.
Hopefully it can help you a lot.
Regards,
Niel
thanks a lot for any points you choose to assign.

Simple transformation XML to ABAP, runtime error: CX_ST_REF_ACCESS

Hi, all experts,
I got a runtime error CX_ST_REF_ACCESS, while I tried to use Simple Transformation to transfer XML-String to ABAP internal table.
Can anybody help me to fix the problem? Thanks very much. It's urgent.
The code of transformation like this:
<tt:root name="DATA"/>
<tt:template>
    <node>
      <tt:deserialize>
        <tt:loop ref=".DATA" name="mdr_data">
          <tt:attribute name="type">
            <tt:value ref="$mdr_data.lf_type"/>
          </tt:attribute>
          <tt:attribute name="objid">
            <tt:value ref="$mdr_data.lf_objid"/>
          </tt:attribute>
          <tt:attribute name="name" value-ref="$mdr_data.lf_name"/>
          <tt:attribute name="short" value-ref="$mdr_data.lf_short"/>
        </tt:loop>
      </tt:deserialize>
    </node>
</tt:template>
The Data-structure in my Report:
DATA: BEGIN OF ls_mdr_data,
        lf_type TYPE /ehr/ct_dt_bo_type,
        lf_objid TYPE realo,
        lf_name TYPE stext,
        lf_short TYPE short_d,
      END OF ls_mdr_data,
     lt_result_data like TABLE OF ls_mdr_data.
If I call the transformation use the XML-String like:
<node type="MDRFOLDER" objid="50016122" name="MDR Root Folder" short="MDR Root"/>
I got the error CX_ST_REF_ACCESS:
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ST_REF_ACCESS', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    The goal was to access variable "LF_TYPE". However, this access was not
    possible.

Hi, all experts,
I got a runtime error CX_ST_REF_ACCESS, while I tried to use Simple Transformation to transfer XML-String to ABAP internal table.
Can anybody help me to fix the problem? Thanks very much. It's urgent.
The code of transformation like this:
<tt:root name="DATA"/>
<tt:template>
    <node>
      <tt:deserialize>
        <tt:loop ref=".DATA" name="mdr_data">
          <tt:attribute name="type">
            <tt:value ref="$mdr_data.lf_type"/>
          </tt:attribute>
          <tt:attribute name="objid">
            <tt:value ref="$mdr_data.lf_objid"/>
          </tt:attribute>
          <tt:attribute name="name" value-ref="$mdr_data.lf_name"/>
          <tt:attribute name="short" value-ref="$mdr_data.lf_short"/>
        </tt:loop>
      </tt:deserialize>
    </node>
</tt:template>
The Data-structure in my Report:
DATA: BEGIN OF ls_mdr_data,
        lf_type TYPE /ehr/ct_dt_bo_type,
        lf_objid TYPE realo,
        lf_name TYPE stext,
        lf_short TYPE short_d,
      END OF ls_mdr_data,
     lt_result_data like TABLE OF ls_mdr_data.
If I call the transformation use the XML-String like:
<node type="MDRFOLDER" objid="50016122" name="MDR Root Folder" short="MDR Root"/>
I got the error CX_ST_REF_ACCESS:
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ST_REF_ACCESS', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    The goal was to access variable "LF_TYPE". However, this access was not
    possible.

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Runtime error while running a DTP

I have changed a keyfigure from integer to fltp. now i try loading the masterdata for some object which consists this keyfigure as an attribute.
the data is loaded successfully in PSA and while runnng the dtp i get a dump with the message that "Runtime Errors OBJECTS_TABLES_NOT_COMPATIBLE"
"Short text:
Two internal tables are neither compatible nor convertible."
Please suggest what actions need to be taken to rectify this error.

Hi Ajeet,
Thanks for the reply.
When i see my data source...
the Type in dataSource shown is FLTP 8 and type from Source system is NUMBER 22 for this field
in transformation its showing FLTP8 [source] ---> FLTP8 [target] for this particular rule.
please let me know if i am missing on some information.

ABAP runtime error

Hi all,
I have a start routine and two routines in my transformation and while activating it lead to a runtime error and displayed a short dump error.I couldnt understand what that error is and was not able to change the transformation or view the routines.Can anyone please help me as how to resolve this issue.
the msg is:
In the running application program the ASSERT statement recognized a situation that shouldnt have occured.
the error may be due to:
1)for the check point group specified in the ASSERT statement,th activation code is set to ABORT.
2)Via a sysytem variant,the activation code is globally set to ABORT for checkpoint groups in the system.
3)the activation mode is set to ABORT on program level.
4)the ASSERT statement is not assigned to any checkpoint group.

Hi
Try to debug the code and see what is going on in the routines.
Go to DTP and in the execute tab change the processing mode to serially in dialog process for debugging then click on change the break point and put your break points at relevant places and then see where it dumps.
hope it helps.
regards
Vishal

Runtime error assertion_failed

hello,
i am getting a runtime error 'assertion_failed' while activating the transformations.
it says the assert condition was violated. i am attaching the error message here.
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
i need help regarding this.
thanks in advance.
muralik

Hello MuraliK,
Plz apply note :998730.
U need to check RSTRANRULE table with certain combination and delete inconsistent records.
-- Plz assign points if helpful --
Regards,
Mainak

Runtime error while executing rule - see long text RSTRAN 301

Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text     RSTRAN     301
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'GBP' cannot be interpreted as a number
    The error was triggered at the following point in the program:
    GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
Maruthi

Guess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation

Runtime Errors         ASSIGN_TYPE_CONFLICT.

Hi,
Can any one help me on the below error.
Runtime Errors         ASSIGN_TYPE_CONFLICT.
I am trying to load Master data text for 0CUSTOMER and the DTP fails.I am in BI 7.0 environment.
Thanks
Raj

This is for 0CUSTOMER Text master data load.
I did a transport from DEV to QAS.It worked fine in DEV but not in QAS.
The transformation is pretty simple
KUNNR(customer) -
> 0CUSTOMER
TXTMD(Name)       -
> 0TXTMD(Medium Description)
The info package works fine but the DTP fails.
Runtime Errors         ASSIGN_TYPE_CONFLICT
Date and Time          19.11.2007 13:48:33
The detailed error message :
Short text
     Type conflict with ASSIGN in program "GPCFUGFSZVTSH2ZBSQO537K7P2W".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "GPCFUGFSZVTSH2ZBSQO537K7P2W" had to be terminated
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to assign a field to a typed field symbol,
     but the field does not have the required type.
How to correct the error
     Adapt the type of the field symbol to the type of the field or use an
     untyped field symbol or use the "CASTING" addition.
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "ASSIGN_TYPE_CONFLICT" " "
     "GPCFUGFSZVTSH2ZBSQO537K7P2W" or "GPCFUGFSZVTSH2ZBSQO537K7P2W"
     "EXECUTE"
     If you cannot solve the problem yourself and want to send an error
     notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Thanks
Raj

When executing a query showing as ABAP runtime error RAISE_EXCEPTION

Hi all,
When i executed a query, it is showing as ABAP runtime error RAISE_EXCEPTION in the short dump.
This is the Analysis in Short dump (ST22)...............
Exception condition "DATE_BEFORE_RANGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLSCAL" raised the exception
condition "DATE_BEFORE_RANGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Date is earlier than factory calendar definition
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLSCAL" or "LSCALU06"
"DATE_CONVERT_TO_FACTORYDATE"
or
"SAPLSCAL" "DATE_BEFORE_RANGE"
or
"WRITEQUERY " "DATE_BEFORE_RANGE"
Could you pls any one tell me what could be the problem and how to reslove this issue.
Thanks & Regards,
Ravi Kumar.

Hi Andre,
Maintain your factory calendar idents Valid To year field (BJAHR) in Table TFACD
You can do this via tcode SCAL, or navigate through SPRO.
Most likely you have your factory calendars set with Valid To dates as 2010. You may also be encountering some load issues depending on exit routines used in transformations in determining workdays/factory days etc.
Thanks,
Eric Filmer

HL7 Outbound runtime error: "Mandatory attribute missing: Standard"?

I am trying to develop an outbound HL7 v2 solution. I have a composite that picks up an XML message, transforms it to a HL7 v2 XML, popuates b2b. properties and hads the payload over to teh B2B. The partners and partnerships are, seemingly, OK. Yet, I get a runtime error "Mandatory attribute missing: Standard". What am I missing?
The error (one of them anyway) looks like that below.
Thanks in advance for any pointers that anyone may be able to offer.
Regards
Michael
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>C0A8A4811296C3CD78A000001FFF4A70</correlationId>
<b2bMessageId>34373438353435383437393236303338</b2bMessageId>
<errorCode>B2B-51507</errorCode>
<errorText>
<![CDATA[
Error Brief :
XEngine error.
]]>
</errorText>
<errorDescription>
<![CDATA[
Error :
Mandatory attribute missing: Standard.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="b2b.messageId" value="34373438353435383437393236303338"/>
<parameter name="b2b.documentTypeName" value="ADT_A01"/>
<parameter name="b2b.documentProtocolVersion" value="2.3.1"/>
<parameter name="b2b.documentDefinitionName" value="ADT_A01_DocDef"/>
<parameter name="b2b.documentProtocolName" value="HL7"/>
<parameter name="b2b.messageType" value="1"/>
<parameter name="b2b.fromTradingPartnerId" value="LocalHL7Receiver"/>
<parameter name="b2b.fromTradingPartnerIdType" value="Name"/>
<parameter name="b2b.toTradingPartnerId" value="127.0.0.1"/>
<parameter name="b2b.toTradingPartnerIdType" value="MLLP ID"/>
</errorDetails>
</Exception>
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE

Answering my own question - I needed to populate the Standard attribute of the outbound message with teh string HL7. I populated Version attribute with 2,3,1 just for a good measure. Things now work.

Runtime error testing in test tab

Hi ,
when Filler = null then it should send null else it should send obj=
For this my udf is if(inValue[0].equals(""))
result.addValue(" ");
}else{
result.addValue("obj=");
When tried this code and testin in the message mapping it shows runtime error .
any suggessions?
Thanks,
Srinivasa

Hi,
Shows Runtime exception
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:Messages/ns0:Message1/ns1:/data/OBI_1/Field_Tag. The message is: Exception:[java.lang.ArrayIndexOutOfBoundsException: 0] in class com.sap.xi.tf.__ method nul$[]

BEA-380000: General runtime error: Read channel closed - intermittent

I am encountering this error code intermittently. My production has been live from past 20 months and I see this error very recently and its like once a week.
I doubt if this has something to do with the network and as this is very generic error(BEA-380000) I am not able to find any pointers on this error.
My environment
Solaris 10,Weblogic 10.3(Not clustered)
fault="<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382500</con:errorCode>
<con:reason>OSB Service Callout action received SOAP Fault response</con:reason>
<con:details>
<con1:ReceivedFaultDetail xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config">
<con1:faultcode xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">soapenv:Server</con1:faultcode>
<con1:faultstring>BEA-380000: General runtime error: Read channel closed</con1:faultstring>
<con1:detail>
<con:fault>
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: Read channel closed</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</con1:detail>
</con1:ReceivedFaultDetail>
</con:details>
<con:location>
<con:node>PipelinePairNode1</con:node>
<con:pipeline>PipelinePairNode1_request</con:pipeline>
<con:stage>stage1</con:stage>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>"
Cheers
Sridhar

Matt,
How are you invoking local proxy from HTTP proxy (using route node or service callout)? Is local proxy calling another proxy/business service? Do you have fault handling implemented?
Can you also check server log to figure out any additional error information (like stacktrace)?
Regards,
Anuj

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime Error in Transformation

Similar Messages

Maybe you are looking for