Runtime Error: "No memory space available ...."

Hello I encountered a runtime error in my report program and goes something like this...
<b>"No memory space available for extending table "I_PRICE"."
What Happened?
"You attempted to extend an internal table, but the required space was not available."
"The internal table "I_PRICE" could not be enlarged further. To extend the internal table "I_PRICE", 8448 bytes of memory space was needed, but none was available."
"At this point, the table "I_PRICE" had 53757232 eintries"
"To facilitate error handling, the internal table "I_PRICE" was deleted"</b>
I understand that the runtime error has something to do with the lack of memory available to run the report. My question is what exactly is the cause of this? And what would be the best way to alleviate this. Thanks again and good day.

Srinivas Adavi pointe i the right direction: You should analyze (or debug) how your internal table is filled.
- check if you append the same record repeatedly
- check if you really need all of the fields
Avoid appending records within a loop on that table because the same record might get processed again and again.
Regrads,
Clemens

Similar Messages

Replicate DataSource, no more memory space available

RSA5, select too much DataSource.
got runtime error when replicate DataSource. How can I change this situation without change SAP basis parameters?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 934756096 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.

Hi,
You install one by one in RSA5 and replocate one by one Application component wise in BW. also check the Table Space in system ask basis team to chekc the size of the database and see the log files in OS/DB level.
Thanks
Reddy

Runtime Errors STORAGE_PARAMETERS_WRONG_SET

Hi,
My functional team had run customized program in dialog, but after few minutes the error occured as below:-
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 344148608 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 344148608. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
SAP Release.............. "620"
Application server.......
Network address..........
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "8x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 15
Short dump setting....... "full"
Database server..........
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "prd"
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Then we try run in background job, but error occurred show as below:-
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
       Occurred on     25.03.2010 at 16:51:02
No storage space available for extending the internal table.
What happened?
You attempted to extend an internal table, but the required space wa
not available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admini
termination messages, especially those beyond their normal deletion
date.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area            (1.000.000 - 15.000.000)
       Classic roll area per user and internal mode
       usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
       Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
       Amount of memory (malloc) for all users of an application
       server. If several background processes are running on
       one server, temporary bottlenecks may occur.
       Of course, the amount of memory (in bytes) must also be
       available on the machine (main memory or file system swap
       Caution:
       The operating system must be set up so that there is also
       enough memory for each process. Usually, the maximum addr
       space is too small.
       Ask your hardware manufacturer or your competence center
       about this.
       In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
       Restriction of memory allocated to the heap with malloc
       for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
       Extended memory area from which all users of an
       application server can satisfy their memory requirement.
I had check parameter value in RZ10 and below is the result:-
1.abap/heap_area_dia = 2000683008
2.abap/heap_area_dia = 2000683008
3. ztta/roll_area = 2000896
4.ztta/roll_extension   = 2000683008
5.abap/heap_area_total   = 2000683008
6.em/initial_size_MB = 20000
I need advice on this.
Thank you
Regards,
Anang78
Edited by: anang78 on Mar 25, 2010 10:14 AM

Hi,
Your customized program execution is demanding more heap memory. It may be pointing to memory re-configuration.
Please refer the following SAP Notes and compare your exiting memory parameter settings and do the adjustment according to the available RAM.
[SAP Note 425207 - SAP memory management, current parameter ranges|https://service.sap.com/sap/support/notes/425207]
[SAP Note 88416 - Zero administration memory management as of 4.0A/ Windows|https://service.sap.com/sap/support/notes/88416]
Also analyze the execution of that Customized Program, weather the Coding is optimized, weather the program is executing any Expensive SQL Statement or not.
Refer SAP Note 129813, one alternative is mentioned to deal with this memory related issue by activating 3GB feature in your existing Windows OS. Please refer Microsoft KB article 283037 and KB 268363 for the same. You will have to edit your boot.ini file to append /PAE switch.
Regards,
Bhavik G. Shroff

When i create role, then ---runtime errors: STORAGE_PARAMETERS_WRONG_SET

when i use the tcode:pfcg->change role "role_de"->menu->"from sap menu"->choose one node->save,
then error is display below:
http://picasaweb.google.com/lh/photo/Q-4BpuuXxBVpMpI40S5BBw
http://picasaweb.google.com/lh/photo/uyNkGRn3h6SXvTsMHPlH6g
How can i do it?
Thanks very much!

When i create the menu for the user, then "Runtime Errors STORAGE_PARAMETERS_WRONG_SET".
Please help me!
This is the error message:
Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
Date and Time          12.12.2008 10:26:56
Short text
     The system is configured incorrectly.
What happened?
     The current program had to be terminated because of an
     error when installing the R/3 System.
     The program had already requested 741665808 bytes from the operating
     system with 'malloc' when the operating system reported after a
     further memory request that there was no more memory space
     available.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     In the system profile, set the parameters
     -abap/heap_area_dia and
     -abap/heap_area_nondia
     to a maximum of 741665808. To be on the safe side, reduce the value by 10,000,
     000.
     Then restart the SAP system.
Error analysis
     When the program was running, it was established that more
     memory was needed than the operating system is able safely
     to provide. To avoid a system crash, you must prevent this
     situation from occurring.
     Last error logged in SAP kernel
     Component............ "EM"
     Place................ "SAP-Server DDDDDD_GREATWAYCOM_03 on host DDDDDD (wp 0)"
     Version.............. 37
     Error code........... 7
     Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
     Description.......... " "
     System call.......... " "
     Module............... "emxx.c"
     Line................. 1881
     The error reported by the operating system is:
     Error number..... " "
     Error text....... " "
How to correct the error
     Report the error to the group responsible for installing your
     R/3 System.
System environment
     SAP-Release 700
     Application server... "DDDDDD"
     Network address...... "192.168.99.23"
     Operating system..... "Windows NT"
     Release.............. "5.1"
     Hardware type........ "Intel 801586 (M"
     Character length.... 16 Bits
     Pointer length....... 32 Bits
     Work process number.. 0
     Shortdump setting.... "full"
     Database server... "DDDDDD"
     Database type..... "MSSQL"
     Database name..... "GREATWAYCOM"
     Database user ID.. "ecc"
     Char.set.... "C"
     SAP kernel....... 700
     created (date)... "May 22 2007 00:14:27"
     create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
     Database version. "SQL_Server_8.00 "
     Patch level. 111
     Patch text.. " "
     Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
     SAP database version. 700
     Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
      NT 6.0"
     Memory consumption
     Roll.... 1609456
     EM...... 447355872
     Heap.... 313508640
     Page.... 16384
     MM Used. 734465040
     MM Free. 27458464
User and Transaction
     Client.............. 001
     User................ "ADMIN"
     Language Key........ "E"
     Transaction......... " "
     Program............. "SAPLSMNU_NEW"
     Screen.............. "SAPMSSY1 3004"
     Screen Line......... 2
     Information on caller of Remote Function Call (RFC):
     System.............. "GREATWAYCOM"
     Database Release.... 700
     Kernel Release...... 700
     Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
     Call Type........... "synchron and transactional (emode 0, imode 0)"
     Inbound TID.........." "
     Inbound Queue Name..." "
     Outbound TID........."C0A8001609E04941C90A0045"
     Outbound Queue Name.." "
     Client.............. 001
     User................ "ADMIN"
     Transaction......... " "
     Call Program........."SAPLERFC"
     Function Module..... "ARFC_DEST_SHIP"
     Call Destination.... "NONE"
     Source Server....... "DDDDDD_GREATWAYCOM_03"
     Source IP Address... "192.168.99.23"
     Additional information on RFC logon:
     Trusted Relationship " "
     Logon Return Code... 0
     Trusted Return Code. 0
     Note: For releases < 4.0, information on the RFC caller are often
     only partially available.
Information on where terminated
     Termination occurred in the ABAP program "SAPLSMNU_NEW" - in
      "READ_MENU_HIERARCHY_FAST".
     The main program was "SAPMSSY1 ".
     In the source code you have the termination point in line 1131
     of the (Include) program "LSMNU_NEWF01".
Source Code Extract
Line     SourceCde
1101                L_LIST_OF_TEXTS.
1102       PERFORM READ_HIERARCHY_INCLUDING_REFS
1103                                  TABLES L_LIST_OF_NODES
1104                                         L_LIST_OF_REFS
1105                                         L_LIST_OF_TEXTS
1106                                         L_VISITED_TREES
1107                                  USING P_TREE_ID
1108                                         SPACE
1109                                         L_MENU_LEVEL
1110                                         SPACE.
1111
1112     * get total number of nodes
1113       DESCRIBE TABLE L_LIST_OF_NODES LINES L_NUM_OF_NODES.
1114
1115       L_RATIO = L_NUM_OF_ALL_NODES / L_NUM_OF_NODES.
Thanks for your help!

ABAP RUNTIME ERROR WHILE RUNNING BSEG REPORTS

hi Exports
I've developed one report using bseg (G/L Account Balance) report but following error occured while giving some G/L account no. bbos those GL account contains lot of records in bseg? how can i fine tuning the report both system and program side?
help me
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 474181200 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 474181200. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.

Hi,
Try to make a first selection in BKPF reducing the Nb of occurence using BUKRS( Company Code) GJAHR( fiscal year ) and if u can BLART ( doc type ).
Use the result in the BSEG selection using a "For all entries" statement. It should reduce the execution time and resources !
Regards,
Erwan

No buffer space available

We are executing a program that use a lot of memory, because that program read a big struct of a database in classes. It's executing properly in Win2000, but in Windows 9x ocurr this error:
No buffer space available (maximum connections reached?): connect
Anybody help me?
Thank you very much?

Have you tried using the -mx and -ms settings passed to java?
I've run very memory intensive things on 95 with jdk 1.2.2 and 1.3.1 and I've had pretty good luck.

1439467 SUIM| RSUSR70: Runtime error DBIF_RSQL_INVALID_RSQL is not availabl

Currently SAP Note 1439467 SUIM| RSUSR70: Runtime error DBIF_RSQL_INVALID_RSQL is not available. When searching the note in http://service.sap.com/notes error message The requested SAP Note is either in reworking or is released internally only is displayed. It was available of couple of days ago.
Does anyone know when it will be available again?
Thanks for help,
Jarmo Tuominen

Hi
Maybe never open the note, The note is only internal, It's that only SAP can see the note. Is likely that the note is being updated, in this case only wait.
if you have any error with your system please paste logs for help or open OSS Ticket
Hi I found this SAP Note 1171653 - SUIM| RSUSR070 runtime error DBIF_RSQL_INVALID_RSQL
Regards
William Neira
Edited by: William Leonardo Neira on Mar 4, 2011 5:52 PM

10.4.11 and "No buffer space available"

Hi!
Just updated to 10.4.11 and now i can't connect to internet.
My AirPort works, i can ping the router, but thats all.
When i try to use Safari i get this msg:
"POSIX error: "no buffer space available" (NSPOSIXErrorDomain:55)"
Anyone have a clue?

Im running 10.5.1. I use a general purpose utility called Cocktail and was fiddling with the network settings. On reboot, opening up Safari resulted in the "..no buffer space NSPOSIXErrorDomain:55 message. Deleting /Library/StartupItems/Cocktail fixed it.

Acpid random crashes: netlink read error - no buffer space

Recently acpid has been randomly crashing on my system:
acpid.service - ACPI event daemon
Loaded: loaded (/usr/lib/systemd/system/acpid.service; disabled)
Active: failed (Result: exit-code) since Sat, 18 Aug 2012 13:51:02 +0200; 7h ago
Main PID: 295 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/acpid.service
Aug 17 22:55:29 arch acpid[295]: input device has been disconnected, fd 17
Aug 18 09:55:27 arch acpid[295]: client 353[0:100] has disconnected
Aug 18 09:55:27 arch acpid[295]: client connected from 353[0:100]
Aug 18 09:55:27 arch acpid[295]: 1 client rule loaded
Aug 18 13:50:38 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:50:41 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:50:56 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:00 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:02 arch acpid[295]: netlink read error: No buffer space available (105)
Aug 18 13:51:02 arch acpid[295]: too many errors reading via netlink - aborting
I have no idea what this means, i don't see other mentions of it on the forums/flyspray and Google mainly seems to list generic code commits.
Perhaps anyone of you has a clue?

joseperezc wrote:
Hi, maybe is something related to this?
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=661344
systemctl enable acpid.socket
that fix it?
Hmm no that's not the problem unfortunately, i can start the daemon without problems, but it just crashes now and then after a while (sometimes more than a day after it was started).
why you are using acpid ?
Because my laptop exposes most of it's special keys (lid, brightness, volume etc) as acpi events, and i need a simple way to capture and script those.
and seriously why you are using acpid ?
Because my laptop exposes most of it's special keys (lid, brightness, volume etc) as acpi events, and i need a simple way to capture and script those.

Runtime error - No PXA storage space available at the moment

hi all...
plz clarify MY DOUBT...
i am unable to post the snap i got in my system..
what happened??
the current abap/4 program had to be terminated b'z there was no space available to load it.
the current program had to be terminated because a capacity limit has been reached
error analysis
unable to load program
the pxa was too small to hold all currently active programs for all users
trigger location of runtime error
program   SAPLWB2B_SCREEN_HANDLING
include    LW2B_SCREEN_HANDLINGUG7
row 130
module type     function
i am the only person working in my pc...i have got installed ecc 6.0 in my machine for training myself...
plz tell me the sequence of steps to over come this...i have increased the virtula memory in my local drives also..
thanks alot
Aavula(gopi2goal)

Hello,
you have to change a parameter of the SAP system to increase the memory used for caching the programs. The parameter is abap/buffersize. Go to transaction RZ10, modify the instance profile for the parameter and restart the system. You can check the size of many memory parameters in transaction ST02.
Kind regard, Hinrich

My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while

Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

Error Message: Your mac osx startup disk has no more space available for application memory.

Hi everyone:
I have a 2010 27" imac. Dual Core i3, 3.2 GHz and 8GB of 1333MHz DDR3 RAM, and a 90% empty 500 GB Hard Drive. Running Snow Leopard 10.6.6
I have received a message intermittently since I got the iMac. The Force Quit menu comes up and says "Your mac osx startupdisk has no more space available for application memory". Sometimes there are a few applications open. Sometimes none. Whenever I look in the Activity Monitor Utility I see 2 or 3 gigs of RAM still available for use, and lots of hard drive space.
Im not sure why I'm getting the message, nor what to do to rectify it. Quitting applications, like it suggests doesn't seem to help.
I am grateful for any advice.
Lauren

Hey Lauren.
First of all you do have some software updates you should be doing. 10.6.7 came out a few weeks ago. Sometimes doing all of your software updates resolve issues such as this.
To check for software updates click the Apple and then Software updates.
As this issue is someone broad, I would test one of the articles below to narrow down your issue.
http://support.apple.com/kb/HT1199?viewlocale=en_US
http://support.apple.com/kb/TS1388?viewlocale=en_US
Let me know if you need extra ideas.
Regards,
Britt.

New MacAir error states "your Mac OSX startup disk has no more space available for application memory" All I have added is MS Office

My new Mac Air states that my " Mac OSX startup disk has no more space available for application memory" and wants to force quit Safari. I have only added MS Office to the computer and Carbonite. Any suggestions?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the Finder and open the Info window. What value is shown for Available (space)?

Error-No more storage space available for extending an internal table.

Hi Experts,
                i am facing problem in a program . its showing runtime error.
Short text
    No more storage space available for extending an internal table.
its showing error at
IF sy-subrc NE 0.
        REFRESH p_wip_tab.
      ELSE.
        i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
        LOOP AT p_wip_tab.
          MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
==> APPEND i_wip_tab.
        ENDLOOP.
      ENDIF.
DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
      p_wip_tab      LIKE zpswip OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_wip_tab OCCURS 0,
        pspnr              LIKE prps-pspnr.
        INCLUDE STRUCTURE zpswip.
DATA:   pernr_name         LIKE pa0002-vorna,
      END OF i_wip_tab.
How i can resolve this problem if anybody knows it then please reply me as soon as possible.
Thanks

Hello.
Probably you fill the internal table with too much data and it cannot hold that much.
You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
Reward if helpful.
Regards,
George

Hard disk has no more space available for application memory

I keep this getting this error after my applications freeze for several minutes.
"Your hard disk has no more space available for application memory."
I have 1 drive with 160 GB and 46 GB available. I'm pretty sure that's plenty of free space. And why does my memory need my drive? I've got 2.5 GB of memory. That should be plenty sufficient to run Safari without needing virtual memory.
Help!

Hello! OSX uses a virtual memory scheme and even though you have a lot of ram it still utilizes the paging file. Panther 10.3.9 and below runs maintenance routines very early in the morning to clear temp files and other stuff. If you don't normally leave it on 24/7 then you may need to consider a utility to clear the temp files and do the routine maintenance. Tiger 10.4+ runs these automatically. I suggest leaving it on all night for a day or so and then restarting and see if the problem clears up. Here's a list of utilities such as Macjanitor.Tom
Utilities

Runtime Error: "No memory space available ...."

Similar Messages

Maybe you are looking for