Runtime error RAISE_EXCEPTION has occurred

I am running BDC in background for PP03 and getting this error message "Error message: (00/341) Runtime error RAISE_EXCEPTION has occurred" but while running in foreground it is working fine.In mode E there is no error ie successfully executed but in background this exception "Exception condition "CNTL_SYSTEM_ERROR" is raised......Please give details analysis of problem as i am new to ABAP-HR.. Pasting the dump also. ABAP Gurus please dont adivice me to try with other alternates like BAPI etc. As i am doN'T know about BAPI and i am bound to fix the problem by BDC only
Thanks in advance

You cannot use PP03 in batch. It is not batch compatible.It uses some control framework which work only if the SAP GUI is active or when it is run in foreground. Use PP02 instead.A workaround of the problem would be to switch off the object manager: Set the ADMINISTRATION OBJMG switch in table T77S0 to X or (to deactivate the object manager for specific users only) proceed according to Note 496718.
In the medium or long term, SAP recommends that you use Transaction PP02 only. Transaction PP02 is and will be the only transaction that is fully batch-input-compatible (also in future releases).

Similar Messages

Iw31 -Recording - Runtime error RAISE_EXCEPTION has occured

Recently We updated Support Pack.
We already operating a transaction, IW31 through a recording method.
After Support Pack, We can able to create Order for only one technical object. We cannot able to create Order for other selected Technical Object.
We tried Recording through Abaper. We got a Run time Error.
Runtime error RAISE_EXCEPTION has occured
Any SAP Note to be applied.
Please suggest.
Raja

hi
check in service market place for the support patch level impact notes in the maintenance and services tab,

Runtime error RFC_NO_AUTHORITY has occurred in SM58

Hi Guys,
We are posting some IDocs from SAP R/3 ECC to XI and they get stuck in SM58 with error:
"Runtime error RFC_NO_AUTHORITY has occurred"
Do you have any ideas what this might be ?
Does this have to do with the user that executes the program to send the IDocs or the user used in RFC, because the RFC in SM59 works fine when tested and the user used there is PIAPPLUSER. It is also possible to logon remote.

Hi,
Thank you for your reply. Problem solved. I assigned role SAP_ALL to PIAPPLUSER used in the RFC Connection in SM59.
Best Regards,
Evaggelos Gkatzios
Edited by: Evaggelos Gkatzios on May 30, 2010 12:45 PM

Runtime error objects_objref_not_assigned has occured

hi,
i created bdc call transaction using (TRIP) tcode. and calling in rfc. in the back end its working properly, and in report also i called this function module and tested, there also getting result
properly, but the problem is, when this RFC used in java application means it showing error like (RUNTIME ERROR OBJECT_OBJECTREF_NOT_ASSIGNED ) has occured.
plz give some solution.......................

Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem?

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred

Hi All,
I am trying to run a MM42 BDC in the background and I am getting the error - Runtime error OBJECTS_OBJREF_NOT_ASSIGNED has occurred. Kindly help

Dear Klaus sir,
Basicalliy the data is coming from dot net to sap by rfc(zobd_upload) and into table zobd..
after that we are using one program where we can fetch the data from zobd table and using one bdc to update the likp table.but in production likp table is not updating and zobd table updated..
how to resolve that issue?
is any bdc problem?

While executing 'Z' BAPI Runtime error CALL_FUNCTION_NOT_FOUND has occurred

Dear Friends,
We Customized 'Z' BAPI but not transported to QA yet,
Is it possible to test with QA by fetch QA data by giving RFC target sys: (QA RFC Destination Name)
If I give RFC target sys: (QA RFC Destination), I am getting Runtime error CALL_FUNCTION_NOT_FOUND has occurred.
How to resole this....
What is method to check this customized BAPI with different server...../
It is working fine for Standard BAPI.
Regards

But you should be able to call it in the DEV system from QA. This will prove that the RFC part works.
Rob

Runtime error CONVT_NO_NUMBER has occurred

Dear experts,
I am using BAPI -- 'HR_MAINTAIN_MASTERDATA' to maintain infotype 8(Basic pay).
I debugged the code. The data is coming in IT (that is of type PPROP) from my text file. But it gives runtime error in the FM saying --
"Runtime error CONVT_NO_NUMBER has occurred"
Please guide,
Sumit.

hi,
I checked in ST22. It says unable to interpret 4B as a number. Now I went to transaction PA30 and checked it's possible values. There were only 2- 8A and 8B. so I changed it to 8B. But still gives same error, as unable to interpret 8B as a number.
This is my int table while debugging--
line infty(c4) fname(c132)   fval(c255)   seqnr(n2)
1     0008     P0008-PERNR     40083005     00
2     0008     P0008-BEGDA     01012010     00
3     0008     P0008-ENDDA     31129999     00
4     0008     P0008-TRFAR     A1     00
5     0008     P0008-TRFGR     ASST.GM     00
6     0008     P0008-TRFST     MA     00
7     0008     P0008-BSGRD     8B     00       " here is my 8B
8     0008     P0008-TRFGB     10     00
9     0008     P0008-DIVGV     01     00
10     0008     P0008-ANSAL     192     00
11     0008     P0008-ANCUR     18437     00
12     0008     P0008-WAERS     INR     00
13     0008     P0008-LGA01     INR     00
14     0008     P0008-BET01     4000     00
15     0008     P0008-LGA02     4657     00
if fval is of c255, why doen it interpret it's fields as a number?

IDOC Runtime error TIME_OUT has occurred

Dears,
          We are having a Machine to Machine Order interface, where huge volume of order files are being sent to SAP from legacy system through XML files which PI interface converts as Inbound IDOCs.
The issue we are facing here is : when huge number of order files are sent the IDOCs are stuck in 51 status due to TIME_OUT error. This is mainly because of :
1. Huge volume of files
2. Size of files
which eventually leads to optimum consumption of system resources and thus leading to TIME OUT errors, where order files gets stuck under 51 status with TIME OUT errors.
Alternative solutions : During peak season we do re run the IDOCs when the system resources are up or not busy.
Let me know, are there any other approach which we can consdier other than below mentioned ones :
1. Batch jobs
2. Bang on for bigger app servers
Your inputs and suggestions are highly appreciated.
Regards
Chirag Gowda

Hi,
break this into two select queries......
use the below code to do the same....
data : begin of fs_afko
              aufnr type afko-aufnr,
              aufpl type afko-aufpl,
              reuck type afko-reuck,
        end of fs_afko.
data : Begin of fs_afpo,
            aufnr type afpo-aufnr,
           matnr type afpo-matnr,
        End of fs_afpo.
data : t_afko type table of fs_afko,
         t_afpo type table of fs_afpo.
SELECT aufnr aufpl rueck
INTO   TABLE t_afko
FROM   afko
WHERE afko~aufnr IN s_aufnr
AND    afko~dispo IN s_dispo.
SELECT afpo~matnr
INTO   TABLE t_afpo
FROM   afpo
FOR ALL ENTRIES IN t_afko
WHERE aufnr = t_afko-aufnr
AND    afpo~matnr IN s_matnr
AND    afpo~dwerk IN s_werks
AND    afpo~dauat IN s_auart.
loop at t_afko into fs_afko.
loop at t_afpo into fs_afpo where aufnr = fs_afko-aufnr.
    move-corresponding fs_afko to fs_temp_orders.
    move-corresponding fs_afpo to fs_temp_orders.
    append fs_temp_orders to it_temp_orders
endloop.
endloop.
Regards,
Siddarth

Runtime error RAISE_EXCEPTION occured

I have created a session after my LSMW is processed. I am not able to process the session in back ground. When I am trying to process that session in back ground, I am not able to do that. I am getting the errror "Runtime error RAISE_EXCEPTION has occured". But I am able to process that session in the foreground. Kindly suggest me something.

If the session is ran in back ground, then it is throwing the error for all the records "Runtime error RAISE_EXCEPTION has occured ".

Runtime errors "Raise_Exception" occur when running crystal report

Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.

Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You.

Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised

Hi All,
I am facing a runtime error, while using transaction DSWP --> Set-up System Monitoring --> Copy Customizing -->
At that time we are getting "Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
===========================================
Runtime Errors RAISE_EXCEPTION
Date and Time 25.07.2008 08:31:11
Short text
Exception condition "METADATA_MISSING" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLDSVAS_SERV" raised the exception
condition "METADATA_MISSING".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLDSVAS_SERV" or "LDSVAS_SERVC7I"
"MAP_DSVAS_TT_DATA_TO_TT_25"
or
"SAPLDSVAS_SERV" "METADATA_MISSING"
or
"RDSMOP_MAIN " "METADATA_MISSING"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "terra"
Network address...... "172.16.1.198"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "TERRA"
Database type..... "ORACLE"
Database name..... "DSM"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 01:07:18"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 133
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 37628064
Heap.... 0
Page.... 65536
MM Used. 31785376
| MM Free. 1656912
=============================================
Configuration:
OS :Windows 2003 server.
Solution Manager 7.0 SP15
Oracle 10.2
RAM - 2 GB
Its bit urgent, Please help out us.
Thanks in advance.
Best Regards,
Pratyusha

Hi
Check the SP level for ABAP and Basis. Download the latest SP level from SWDC and apply it on the system
This error is related to ABAP program.
Currently the latest available patch level is 16. Please download both ABAP and BASIS SP 16 and apply them on the system.

ABAP Runtime Error : RAISE_EXCEPTION

Hi Friends,
I am getting the below dump.
Runtime Error: RAISE_EXCEPTION
A RAISE statement in the program "SAPLRSDU_PART" raised the exception condition "TABLE_NOT_EXISTS".
Can any body help me to understand why this error occured.
Thanks & Regards
Prasanth

Friends,
Below is the place where it got terminated.But the issue solved by rerunning the process chain. We have to provide report on why this error occured. So please tell me could be is the reason behnd this error.
Information on where terminated
    Termination occurred in the ABAP program "SAPLRSDU_PART" - in
     "RSDU_PARTITIONS_INFO_GET".
    The main program was "RSPROCESS ".
     In the source code you have the termination point in line 47
    of the (Include) program "LRSDU_PARTU02".
    The program "SAPLRSDU_PART" was started as a background job.
    Job Name....... "BI_PROCESS_REPA_BC"
    Job Initiator.. "MAESTRO"
    Job Number..... 06564401

Runtime error raise_exception (Exception condition "NOT_EXIST" raised)

Hi,
I tried to ran a DTP to load data in a Standard DSO. Once I run the DTP ,instantly it is showing me short dump.I tried to ran it 2 times. Every time it shows me dump
Runtime Errors RAISE_EXCEPTION
Short Text : Exception condition "NOT_EXIST" raised.
Error Analysis : A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Thanks in advance,
Regards,
Snehasish

Hi,
This kind of issues occur in BI7.0, the cause is not clear.
You can once again delete the Data in the DSO using SE14(If Production system, make sure you contact your Basis team for this).
You will have to use the table names(check the Delete data option & click on Activate and adjust databas)
Thanks,

Runtime Errors "RAISE_EXCEPTION"

Hi Friends,
During the execution of scheduled background job .The system is showing RUN TIME ERROR "RAISE_EXCEPTION" when i am going through job log.
Pls help me to find out the reason of this runtime error.When this occurs with this type of runtime occurs & how can i resolve this.
With Regards
Amit

Exceptions as raised by function modules. If a program calling the function module does not handle the exception (check for sy-subrc value after the call to the function module) or switch off the exception ( OTHERS = 0 in the function module call exception list) a dump would result in the event that the function module does raise an exception.
If this call to the function module is in a Z program you can change the code to either handle or switch off the exception. If it is an SAP program (which should not be the case because that would mean it is a bug that SAP needs to fix) then you would have to investigate why the function module failed and how can the raising of the exception be avoided.
To know which function module failed look at the dump in transaction ST22.

Portal Runtime Error : An exception occurred while processing a request

Hello friends,
After upgradation of my portal to the following patch level, SAP J2EE 6.20:
Portal Version : EP 6 SP 2 patch 29 hotfix 0
Content Mgmt and Collaboration version : 6 SP2 patch 5
i faced many performance related issues. Portal seems to be very slow. After logging in, most of the time I get 2 errors:
Either
1> Iview remains blank.
Or
2> Portal Runtime Error : An exception occurred while processing a request. Portal Runtime exception occured. Please check the System Log.
But when I refresh that particular iview, it works fine.
I went through the portal.log file (/usr/sap/PEP6/j2ee/j2ee_00/cluster/server/managers/log/portal/logs). And found the root cause of most of the exceptions as "com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found."Aug 18, 2005 6:07:42 PM # PRT-Async 2 Fatal Exception ID:06:07_18/08/05_0669
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/ACCContent/ACCContent.Roles/Company/R.Employee/W.MyWork/P.MyWork.DesktopTools/I.Contacts
Component class : com.sapportals.portal.prt.pom.RootComponentNode
User : tempuser
 at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:853)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:311)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:153)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Caused by: com.inqmy.services.servlets_jsp.server.ServletNotFoundException: The requested servlet ( portal ) not found.
 at com.inqmy.services.servlets_jsp.server.ServletContextFacade.loadServletLocal(ServletContextFacade.java:3660)
 at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:81)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:275)
 at com.inqmy.services.servlets_jsp.server.RequestDispatcherImpl.include(RequestDispatcherImpl.java:384)
 at com.sapportals.portal.prt.pom.RootComponentNode.service(RootComponentNode.java:144)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:363)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:376)
 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
 at java.lang.Thread.run(Thread.java:479)
Help needed.(as i am helpless now.)
Regards,
Nilz

Anthony,
I had check it. It was correct. But the thing when I saw in the component Inspector of portal, my iview did not appear.
I created like this
 project-> rightclick-> export-> par ->selecting project-> givint protal password-> and finish.
The NW didn't give any error, but the par file didn't appear in the portal componet Inspect.
but the par file is created in the NW studio Navigation bar.
Let me know any help regarding this
thanks
venkat

Runtime error RAISE_EXCEPTION has occurred

Similar Messages

Maybe you are looking for