Runtime Error while activating data into dso

hello all,
i get a runtime error if i try to activate the loaded data in a dso object. A part of the error message is shown here:
"SAPLRSBATCH"
"RSBATCH_START_PROCESS"
285     call function 'TH_SERVER_LIST'
286       tables
287         list           = l_t_server
288       exceptions
289         no_server_list = 1
290         others         = 2.
291     read table l_t_server with key
292          host = sy-host.
293     if sy-subrc = 0.
294       l_s_rsbatchheader-server = l_t_server-name.
295       refresh l_t_server.
296     else.
>>>>       message x000.
298     endif.
I found the function 'TH_SERVER_LIST' gives as result
name = LAPTOP3_NSP_00
host = laptop3
As you see, the host is written in lower case!
If i work with a testprogram to show me the sy-host value, i get it in upper case letters: LAPTOP3.
Could it be a problem?
I read another message here with advice for sap note xyz. But i cant apply SP08 like it is explained there. The current system is working with SP05. Later SPs are not available for me!
I also cant apply the corrections manually because the developer key 29671482393151224771 is invalid for any user except BCUSER in transaction SE80 client 000! If i try to change or create a program/function in TA SE37 or SE38 i always get the message "invalid developer key".
Pls tell me where can i change the value for the function TH_SERVER_LIST and how can i create my own functions and programs in NW04s?
thanks you much
Frank

Hi Ron,
thanks, this note describes what i have to do. But it doesnt help!
How can i go to SP7 if i cant download it? Message "Für den angemeldeten User nicht sichtbar" appears always.
How can i follow the instructions to correct the function modules if i dont have an developer key on the NSP system?
I'm not in any ramp-up program. Just found the free sneak preview of NW2004s here in SDN, downloaded it and get the problems while using. So i ask what can i do?
Thanks
Frank

Similar Messages

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
    data: l_d_length like sy-index,
             l_d_char type c,
             l_d_index type sy-index,
          l oopx like sy-tabix.
    data : xinfobj(30) type c value 'RABC'.    -> this is ur infoobject name
    clear : result.
    call function 'CONVERSION_EXIT_ALPHA_INPUT'
      exporting
        input = tran_strucutre-XYZ     -> object name in ur structure
      importing
        output = result.
    l_d_length = strlen( result ).
    do l_d_length times.
      l_d_index = sy-index - 1.
      l_d_char = result+l_d_index(1).
      call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
        exporting
          i_chavl                 = l_d_char
          i_iobjnm                = xinfobj
    I_S_COB_PRO             =
    I_T_COB_PRO_CMP         =
       exceptions
         chavl_not_allowed       = 1
         others                  = 2
      if sy-subrc <> 0.
        result+l_d_index(1) = ' '.
      endif.
    enddo.
Regards;
Jitendra

Error while activating data in DSO

Hi Gurus, While activating I am getting these 2 messages "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER" and the other message is "Fiscal year variant K4 not expected" and in some other Data Packages I am getting "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER"
Kindly help in this matter.

Hi,
Try these threads.
Error when activating data in 0FI_GL_04 ODS (SIDS)
Unable to activate data in DSO
Error when assigning SID : Action VAL_SID _CONVERT table
Can'T Activate ODS Data
FI error in rspc chain
Same issue as yours.
Hope this helps.
Thanks,
JituK

Runtime error while loading data into infocube

Hi all,
I am getting a runtime error while loading the transaction data into the InfoCube.
Exception name: CX_SY_GENERATE_SUBPOOL_FULL
Runtime error: GENERATE_SUBPOOL_DIR_FULL
Anyone has any idea about this error? Any help will be really helpful. Thanks in advance.
Regards,
Sathesh

Hi Sathesh,
Please provide more details for the problem.
You can go and check in ST22. Go through the Dump Analysis and Let us know.
Regards
Hemant Khemani

Got one error while activating data in dso

Hi,
I am loading some data to SAP given dso 0figl_o02. while doing so i got one error with following description
Error short text : "Value "CONVERSION REVERSAL " from characteristic 0DOC_HD_TXT contains an error at position 20"
Long text : "Characters that have a hexadecimal format between HEX00 and HEX1F are not permitted in characteristic values. The 20th character is one of these characters. The value is therefore not permitted.
I dont know how to find out exactly which record has this wrong data. I checket in PSA for this record with error its not showing any of such records.
Please suggest some soluion
Thanx

Hi Sudeep,
First you need to get the values from characteristic 0DOC_HD_TXT that contains an error.
Therefore, go to the ODS/DSO contents tab through RSA1(manage) and select the first option LOGS and then you will be able to select log for Activation and then execute it.
You will no get several requests, select your relevant request which will be in red and then select Application Log at the botton of the screen, then you will be displayed with another screen there you check the date of activation is correct or not becoz by default today's date will be there.
Then you will get the log for it --> double click on the problem class which is in red for it and you will get the value for the 0DOC_HD_TXT where it has special char.
Then go to PSA select all data packets and number of records (give full number of the records transfered) and then enter. It might take sometime if you have huge data. Once you get the records then filter on the 0DOC_HD_TXT column and then give the value you copied from the log.
Then you can edit the special char (remove) or if you want that to be displayed then paste the same spl. char in RSKC and execute.
Activate it again.
Hope it helps...
Best Regards,
MK

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Error while activating Data source

Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
Bbee

Hi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT

Getting Runtime Error while Activating Characteristics in BW sandbox system

Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AM

Hi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards.

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

Error while activating data source in BI

Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Error while Inserting data into flow table

Hi All,
I am very new to ODI, I am facing lot of problem in my 1st interface. So I have many questions here, please forgive me if it has irritated to you.
========================
I am developing a simple Project to load a data from an input source file (csv) file into a staging table.
My plan is to achieve this in 3 interfaces:
1. Interface-1 : Load the data from an input source (csv) file into a staging table (say Stg_1)
2. Interface-2 : Read the data from the staging table (stg_1) apply the business rules to it and copy the processed records into another staging table (say stg_2)
3. Interface-3 : Copy the data from staging table (stg_2) into the target table (say Target) in the target database.
Question-1 : Is this approach correct?
========================
I don't have any key columns in the staging table (stg_1). When I tried to execute the Flow Control of this I got an error:
Flow Control not possible if no Key is declared in your Target Datastore
With one of the response (the response was - "FLOW control requires a KEY in the target table") in this Forum I have introduced a column called "Record_ID" and made it a Primary Key column into my staging table (stg_1) and my problem has been resolved.
Question-2 : Is a Key column compulsary in the target table? I am working in BO Data Integrator, there is no such compulsion ... I am little confused.
========================
Next, I have defined one Project level sequence. I have mapped the newly introduced key column Record_Id (Primary Key) with the Project level sequence. Now I am got another error of "CKM not selected".
For this, I have inserted "Insert Check (CKM)" knowledge module in my Project. With this the above problem of "CKM not selected" has been resolved.
Question-3 : When is this CKM knowledge module required?
========================
After this, the flow/interface is failing while loading data into the intermediar ODI created flow table (I$)
1 - Loading - SS_0 - Drop work table
2 - Loading - SS_0 - Create work table
3 - Loading - SS_0 - Load data
5 - Integration - FTE Actual data to Staging table - Drop flow table
6 - Integration - FTE Actual data to Staging table - Create flow table I$
7 - Integration - FTE Actual data to Staging table - Delete target table
8 - Integration - FTE Actual data to Staging table - Insert flow into I$ table
The Error is at Step-8 above. When opened the "Execution" tab for this step I found the message - "Missing parameter Project_1.FTE_Actual_Data_seq_NEXTVAL RECORD_ID".
Question-4 : What/why is this error? Did I made any mistake while creating a sequence?

Everyone is new and starts somewhere. And the community is there to help you.
1.) What is the idea of moving data from stg_1 and then to stg_2 ? Do you really need it for any other purpose other than move data from SourceFile to Target DB.
Otherwise, its simple to move data from SourceFile -> Target Table
2.) Does your Target table have a Key ?
3.) CKM (Check KM) is required when you want to do constraint validation (Checking) on your data. You can define constraints (business rules) on the target table and Flow Control will check the data that is flowing from Source File to Target table using the CKM. All the records that donot satisfy the constraint will be added to E$ (Error table) and will not be added to the Target table.
4.) Try to avoid ODI sequences. They are slow and arent scalable. Try to use Database sequence wherever possible. And use the DB sequence is target mapping as
<%=odiRef.getObjectName( "L" , "MY_DB_Sequence_Row" , "D" )%>.nextval
where MY_DB_Sequence_Row is the oracle sequence in the target schema.
HTH

Error while loading data into clob data type.

Hi,
I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
Let me know if anyone come across and resolved this kind of issue.
Thanks much,
Nishit Gajjar

Mr. Gajjar,
You didnt mention what KMs you are using ?
have a read of
Re: Facing issues while using BLOB
and
Load BLOB column in Oracle to Image column in MS SQL Server
Try again.
And can you please mark the Correct/Helpful points to the answers too.
Edited by: actdi on Jan 10, 2012 10:45 AM

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Getting error while loading Data into ASO cube by flat file.

Hi All,
i am getting this error Essbase error 1270040: Data load buffer[1] does not exist while loading data into ASO cube.
does anyone have solution.
Regards,
VM

Are you using ODI to load the data or maxl? If you are using an ODI interface, are you using a load rule also which version of essbase and ODI are you using
Cheers
John
http://john-goodwin.blogspot.com/

Runtime Error while activating data into dso

Similar Messages

Maybe you are looking for