Runtime error while executing CAT2
Hi All,
My user is executing the CAT2 as below:
Going to CAT2
Given profile as Z001 which allows the multiple employees
its is giving another screen as "Personal number selection for fast data entry" screen
Click on Further selections button
Selecting the cost ceter and transfer to right side
Selecting the Cost center 012-0088
Clicking on execute button
getting the Runtime error
If she gives the other cost center as 012-0089 or 012-0090, there is no error is showing to her.
Even for the Cost center 012-0088, i run with my user id , there is no error.
Can anybody suggest why this runtime error occurs for this standard transaction ?
Thanks
Shankar
HI Sreekanth,
I am not able to paste the total Runtime error message. If you provide me your own details, i will send as attachement to you.
About your second question: We are using the profiles. On the basis of the profiles selection we are selecting the multiple employees. It is the normal way of doing by the client. Going to selection screen first and get the cost center to the screen from the further selections, then we give the cost center and execute. We get the employee names belonging to that cost center. Selecting the employee name there and will go to the hours input screen.
Here immediatly after giving the costcenter and executing, the user getting the runtime error. But not me
shankar
Similar Messages
-
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Runtime error while executing rule - see long text RSTRAN 301
Hi BW Gurus,
When I executing the DTP, the following error occured.
Runtime error while executing rule -> see long text RSTRAN 301
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'GBP' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP46DQFOYRZTUS0QITMO07IFTS0 1137
Appreciate any useful suggestions.
Thanks in advance.
MaruthiGuess you are doing some calculation in your routines ..based on Currency Key i.e USD or INR , GBP..etc ..it should be currency value..rather than currency key. Check your field caluclation
-
Diadem runtime error while executing command "SchemeMeasStar"
Hello:
I used DIAdem9.0 and DAQCard6062E to acquire 16 channel data. I collected 65536 data for every channel. Whereas After the data acquisition stopped, an Error Message would poped up, but the data is still stored in data portal. the Error is like follows:
-Error- DIAdem
Runtime Error While Executing Command "SchemeMeasStar"
Error Type: UNKNOWN
Error Address:00001720
Module Name:GFSBase.Dll
Would you like to give me some suggestions?
thanks very much
jingDear MarcusP:
Thank you very much.
your solution really works. The attached is the detailed information of the problem. Would you like to tell me more about the prolem and how to solve the problem thoroughly.
Thank you very much.
yours
Jing
Attachments:
DIAdem_Error.doc 305 KB -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
Runtime error while executing New Hire action in PA40
Hi All,i am getting short dump while executing PA40 for new hire action typecan anyone look into this and guide as i am new to HCMNote: getting dump only for one user id for rest all other user id i am not getting dump.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time 21.08.2014 14:07:03
Short text
Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
include "/1PAPAXX/HDR_21000AO01 " in
line 52:
""LV_LENGTH" has already been declared"
The include has been created and last changed by:
Created by: "HCM04 "
Last changed by: "HCM03 "
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program /1PAPAXX/HDR_21000A :
""LV_LENGTH" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0007
Application server... "dc-ds-erp"
Network address...... "172.16.23.111"
Operating system..... "Linux"
Release.............. "3.0.13-0.27-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dc-ds-erp"
Database type..... "ORACLE"
Database name..... "ECD"
Database user ID.. "SAPSR3"
Terminal.......... "NLC-HP"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Sep 14 2013 06:16:24"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
Database version. "OCI_112, 11.2.0.3.0, V1, default"
Patch level. 500
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 37708200
Heap.... 0
Page.... 106496
MM Used. 4666776
MM Free. 3709976
User and Transaction
Client.............. 210
User................ "HCM03"
Language key........ "E"
Transaction......... "PA40 "
Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "SAPFP50M"
Screen.............. "MP000000 1000"
Screen Line......... 3
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "SAPFP50M" - in
"GET_HEADER_WITH_TCLAS".
The main program was "MP000000 ".
In the source code you have the termination point in line 146
of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
EXPORTING
118
DHDID = FHD_HID
119
BEGDA = BEGDA
120
TCLAS = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
* MOLGA =
125
P0001 = P0001
126
PERNR = PSPAR-PERNR
127
IMPORTING
128
PROG = HEADER_PROG
129
DNUM = HEADER_DYNNR
130
EXCEPTIONS
131
HEADER_DEACTIVATED = 1
132
HEADER_UNKNOWN = 2
133
HEADER_GENERATE_DEACTIVATED = 3
134
HEADER_GENERATE_FAILED = 4
135
INTERNAL_ERROR = 5
136
OTHERS = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
HEADER_PROG = 'SAPMP50A'.
141
HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL. "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL. "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.
149
* Wird mit Einfuehrung des Headerobjekts obsolet.
150
PERFORM REMEMBER_HEADER " "XYVPH4K015649
151
USING HEADER_PROG HEADER_DYNNR 'S'. " "XYVPH4K015649
152
ENDFORM.
153
154
* FORM RE588I *
155
156
157
158
* --> T588I_DHDID *
159
* --> T588I_MOLGA *
160
* --> T588I_TCLASImplement SAP Note 1004280.. your issue if fixed
If your issue is resolved request you to close the thread or else free feel to touch base
BR
Anil -
Portal runtime error while executing BI report through BEx Query designer
I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nkDear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards -
ABAP runtime error while executing T.code : PC00_M40_CALC
Hi,
I have applied SAP note 1568264 - Budget Changes 2011 as released by
SAP and i also applied the pre-requiste SAP notes mentioned in the
above SAP note
1) SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
2) SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
3) SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
After applying the SAP notes, when i am trying to execute the T.Code :
PC00_M40_CALC, i am getting an "Abap runtime error"
" Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "HINCALC0 " in include "PCTAXIN0
" in
line 905:
""ENDUZ-" expected, not "EDU_""
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "S2K_BASIS "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed. "
Kindly suggest me what has to be done on priority basis.
Regards
VishThe dump error is generally encountered if your system is at a lower Support Pack level. For implementing Note 1568264 (Budget Changes 2011), you need to be at the below mentioned pre-requisite level corresponding to your Release:
Prerequisites:
Release Support Package
604 HRSP29
600 HRSP63
500 HRSP80
470 HRSPB4
46C HRSPG9
The correct sequence to implement the Notes is:
SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
SAP Note 1568264- Budget Changes 2011
This should solve the issue unless there is some problem while implementing the Notes.
Regards,
Nishtha -
RSIMPCURR: Runtime error while executing
Hi Everyone,
I want to create a process chain to transfer global settings from my ECC system to the BI system. For this purpose I was checking the ABAP program RSIMPCURR which is used to transfer the currecny exchange rates. But when this program is executed, it throws a runtime error and ends with a dump.
Here's a snippet of the ABAP dump:
151 CALL FUNCTION 'RSAR_DESTINATION_GET'
152 EXPORTING
153 i_logsys = l_source
154 IMPORTING
155 e_destination = l_destination
156 EXCEPTIONS
157 not_exist = 1
158 OTHERS = 2.
159 IF sy-subrc <> 0.
' >>>>> MESSAGE x000(rh).
161 ENDIF.
162
The thing is, when I manually transfer the currencies from the RSA1 > Source system screen, I'm not facing any issues. Its only while executing the program that I get the dump.
Any suggestions?
Thanks,
RamHi,
I don't think this is a resource issue, because the global settings get transferred when I do it from RSA1 > Source system.
Also the FM 'RSAR_DESTINATION_GET' is the one that throws the exception 'Cannot find destination'. I think this is because I cannot enter the Source System in the program parameters because it is disabled. The other parameters (like 'Exchange Rate type' and 'Changes since') are not disabled and I'm able to enter the selections into those.
Is there anyway that I can enable the source-system box and provide my source system as a location extract the currencies? -
Runtime Error while executing Assignment
Hi Experts,
I have 3 fields at 1) ValidStartDate 2) ValidEndDate 3) Item Status.
I have written assignment to check if my current system date and time falls between validstartdate and validenddate, then my Itemstatus field should be active else inactive.
Logic:
If(SYSTIME(0)>=validstartdate AND SYSTIME(0)<=validenddate, Active, Inactive).
SYSTIME(0) Is current system date and time
and my validstartdate and validenddate fields data type is Literal Date
Assignment Field: ItemStatus
Error Message: "A runtime error occurred while evaluating an assignment, validation or calculated field".
Could any one please suggest where went wrong, The same logic is executing sucessfully in validation with TRUE, FALSE.. in place of Active and Inactive.
Thanks in advanced.
Thanks
BharatHi,
we have the same problem:
A runtime error occurred while evaluating an assignment
What is the solution ?
Thank you.
Petr. -
Runtime error while executing VA01
Hi All,
I'm getting ABAP dump while executing VA01. Especially while doing variant configurations.
Please have a look into following dump.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program SAPMV45A
Application Component SD-SLS
Date and Time 15.12.2011 00:37:01
Short text
Syntax error in program "SAPMV45A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPMV45A " in include
"DI_ESD_SAPMV45A===============E " in
line 184:
""TEXT" has already been declared"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SANJAY "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPMV45A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPMV45A :
""TEXT" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 702
SAP Basis Level. 0003
Application server... "SANDERP"
Network address...... "172.16.1.12"
Operating system..... "Windows NT"
Release.............. "6.0"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "SANDERP"
Database type..... "DB6"
Database name..... "OLS"
Database user ID.. "SAPOLS"
Thanks in Advance,
UdayHi
there is a syntax error in the user exit SAPMV45A created for VA01. Last change was done by sanjay.
Request your abap team to correct the syntax to resolve the issue.
Hope this is useful.
Regards,
Deepak Kori -
Runtime error while executing transaction BDLS
Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
Short text
Unable to interpret "7,160 " as a number.
How to resolve the above problem?Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard -
ABAP Runtime Error while executing planning folder
Hi experts.
We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
Appreciate if anyone can help me out with this.
Runtime Error RAISE_EXCEPTION
Date and Time 20.04.2007 16:50:23
ShrtText
Exception condition "X_MESSAGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSBR" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Cancel
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLRSSBR" or "LRSSBRU03"
"RSSB_AUTHORITY_IOBJVL_CHECK"
or
"SAPLRSSBR" "X_MESSAGE"
or
"UPB_PM_CUST_START " "X_MESSAGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "S53KJ165"
Network address.......... "10.1.53.165"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C3A11F4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "S53KJ170"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:42:11"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 16759712
Heap..................... 0
Page..................... 57344
MM Used.................. 10079624
MM Free.................. 2487240
SAP Release.............. "640"
User and Transaction
Client.............. 350
User................ "S51643"
Language key........ "E"
Transaction......... "UPSPL "
Program............. "SAPLRSSBR"
Screen.............. "SAPLUPB_PM_ALV 1000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
The termination occurred in line 416 of the source code of the (Include)
program "LRSSBRU03"
of the source code of program "LRSSBRU03" (when calling the editor 4160).
Source Code Extract
Line
SourceCde
386
l_s_range-low = l_activity.
387
APPEND l_s_range TO l_sx_auth_check_detail-range.
388
INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
389
390
CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
391
EXPORTING
392
i_infocube = g_sx_iobjvl_check-infocube
393
i_uname = l_uname
394
i_th_hierarchy = g_sx_iobjvl_check-hierarchy
395
i_message = i_message
396
i_activity_force_check = i_activity_force_check
397
CHANGING
398
c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
399
c_tx_no_auth = l_tx_no_auth
400
c_ts_auth_tlevel = e_ts_auth_tlevel
401
EXCEPTIONS
402
user_not_authorized = 1
403
auth_check_failure = 2
404
auth_check_error = 3
405
inherited_error = 4
406
x_message = 5.
407
IF sy-subrc = 0.
408
REFRESH l_tx_no_auth.
409
CR 20050826 HW873685 SP29 Part 2/3 begin
410
SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
411
ELSEIF sy-subrc = 2.
412
ao_missing = rs_c_true.
413
e_subrc = 2.
414
CR 20050826 HW873685 SP29 Part 2/3 end
415
ELSEIF sy-subrc = 5.
>>>>>
RAISE x_message.
417
ELSE.
418
e_subrc = 2.
419
ENDIF.
420
421
correct the kid now
422
LOOP AT l_tx_no_auth INTO l_sx_no_auth.
423
l_sx_no_auth-kid = <l_sx_auth_check>-kid.
424
APPEND l_sx_no_auth TO e_tx_no_auth.
425
ENDLOOP.
426
427
ENDLOOP.
428
429
End LOOP: Check all SUBNR (FEMS)
430
431
432
CR 20050826 HW873685 SP29 Part 3/3 begin
433
If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
434
this means empty no_auth table
435
IF ao_missing = rs_c_true.
Contents of system fields
Name
Val.
SY-SUBRC
5
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
210
SY-UCOMM
SELECT
SY-TITLE
Execute All Cost Element
SY-MSGTY
E
SY-MSGID
R7
SY-MSGNO
057
SY-MSGV1
0CO_AREA
SY-MSGV2
A
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
40 FUNCTION SAPLRSSBR LRSSBRU03 416
RSSB_AUTHORITY_IOBJVL_CHECK
39 FORM SAPLRSDRC LRSDRCF15 113
AUTHORITY_CHECK
38 FORM SAPLRSDRC LRSDRCF27 57
BASIC_QUERY_DATA_GET_ROLAP
37 FUNCTION SAPLRSDRC LRSDRCU05 44
RSDRC_BASIC_QUERY_DATA_GET
36 FUNCTION SAPLRSDRC LRSDRCU15 189
RSDRC_BASIC_CUBE_DATA_GET
35 FORM SAPLRSDRC LRSDRCF25 373
DATA_GET
34 FUNCTION SAPLRSDRC LRSDRCU02 249
RSDRC_CUBE_DATA_GET
33 FUNCTION SAPLRSDRI LRSDRIU01 352
RSDRI_INFOPROV_READ
32 FORM /1SEM/UPCBW_350TMWPA01 UPC_BWINTERFC__FIX 174
DATA_READ
31 FUNCTION SAPLUPCBW LUPCBWU06 56
UPC_BW_DATA_READ
30 FUNCTION SAPLUPC1 LUPC1U06 67
UPC_DATA_READ
29 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ_DB 25
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
28 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_GET 167
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
27 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_READ 5
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
26 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ 46
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
25 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 395
READ_TRANSACTION_DATA
24 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 561
GET_DATA
23 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 800
EC500_SELECT_DATABASE
22 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 575
SELECT_DATABASE
21 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 464
SELECT_AND_FIND_HEADER_COMBI
20 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 217
LOGICAL_SCREEN_FILL_HEADER
19 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 60
LOGICAL_SCREEN_FILL
18 FUNCTION SAPLUPP_PP_KERNEL LUPP_PP_KERNELU01 114
UPP_PP_KERNEL_CONSTRUCTOR
17 METHOD CL_UPB_PL_ALV=================CP CL_UPB_PL_ALV=================CM01E 176
CL_UPB_PL_ALV=>CONSTRUCTOR
16 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 623
OUTPUT_CREATE
15 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 202
OUTPUT_INIT
14 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1062
OUTPUT_PROCESS
13 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1225
OUTPUT_SWITCH_TO_LAYOUT
12 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF05 748
INIT_CONTROLS
11 MODULE (PBO) SAPLUPB_PM_ALV LUPB_PM_ALVO01 13
STATUS
10 FUNCTION SAPLUPB_PM_ALV LUPB_PM_ALVU01 24
UPB_PM_ALV_START
9 METHOD CL_UPB_PM_APPLC===============CP CL_UPB_PM_APPLC===============CM00A 88
CL_UPB_PM_APPLC=>EXECUTE_PM
8 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 76
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
7 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 23
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
6 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM003 121
CL_UPB_PM_ADMIN=>PAI
5 FORM SAPLUPB_PM LUPB_PMF04 80
USER_COMMAND_0210
4 MODULE (PAI) SAPLUPB_PM LUPB_PMI04 11
USER_COMMAND_0210
3 FUNCTION SAPLUPB_PM LUPB_PMU22 86
UPB_PM_MAIN
2 FORM UPB_PM_CUST_START UPB_PM_START_ADMIN 251
PM_START
1 EVENT UPB_PM_CUST_START UPB_PM_START_ADMIN 14
START-OF-SELECTION
Chosen variables
Name
Val.
No. 40 Ty. FUNCTION
Name RSSB_AUTHORITY_IOBJVL_CHECK
I_ACTIVITY
03
33
03
I_ACTIVITY_FORCE_CHECK
2
0
I_MESSAGE
X
5
8
I_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
I_UNAME
S51643
533333222222
351643000000
E_SUBRC
0
0000
0000
E_TS_AUTH_TLEVEL
Table[initial]
E_TX_NO_AUTH
Table[initial]
RSSB_C_AUTH_KEYFIGURE
1KYFNM
3454442222
1B96ED0000
SY-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
SYST-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
%_SPACE
2
0
RS_C_RANGE_SIGN
IE
44
95
SY-SUBRC
5
0000
0005
L_TX_NO_AUTH
Table[initial]
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
SYST
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
L_SX_NO_AUTH
############ÿÿÿÿ
000000000000FFFF
000000000000FFFF
L_SX_NO_AUTH-KID
Table[initial]
<L_SX_AUTH_CHECK>-KID
Table IT_33029[1x4]
FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
Table reference: 2052
TABH+ 0(20) = 07000000908D2FD0000000000000000000000000
TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
TABH+ 40(16) = 040002F1000003480001432821000000
store = 0x07000000908D2FD0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 2052 (0x00000804)
label = 33029 (0x00008105)
fill = 1 (0x00000001)
leng = 4 (0x00000004)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000003
occu = 1 (0x00000001)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 5 (cmpSingle)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908E0CC8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x00000001)
lineAlloc = 1 (0x00000001)
store_id = 6998 (0x00001B56)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
No. 39 Ty. FORM
Name AUTHORITY_CHECK
I_TH_SFC
Table IT_32090[14x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
Table reference: 1757
TABH+ 0(20) = 070000009052D8F8070000009081372800000000
TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
TABH+ 40(16) = 040002DB000017C80010839401000000
store = 0x070000009052D8F8
ext1 = 0x0700000090813728
shmId = 0 (0x00000000)
id = 1757 (0x000006DD)
label = 32090 (0x00007D5A)
fill = 14 (0x0000000E)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000099
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090811F18
pghook = 0x0000000000000000
idxPtr = 0x070000009052D950
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6872 (0x00001AD8)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813588
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
SY-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_S_RANGE-LOW
1ROWCOUNT
354544545222222222222222222222222222222222222222222222222222
12F73F5E4000000000000000000000000000000000000000000000000000
<L_S_SFK>-KYFNM
1ROWCOUNT
354544545222222222222222222222
12F73F5E4000000000000000000000
RSDRC_C_QUERYMODE-CUMULATIVE
C
4
3
S_S_COB_PRO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_SX_SELDR-RANGE+8(8)
Table IT_32110[2x136]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
Table reference: 1902
TABH+ 0(20) = 0700000090813D10000000000000000000000000
TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
TABH+ 40(16) = 040002DB00001AA00010254421000000
store = 0x0700000090813D10
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1902 (0x0000076E)
label = 32110 (0x00007D6E)
fill = 2 (0x00000002)
leng = 136 (0x00000088)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000112
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 2 (table_line)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908800F8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6876 (0x00001ADC)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_S_RANGE
IEQ1ROWCOUNT
4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_TSX_SELDR
Table IT_32094[13x120]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
Table reference: 1870
TABH+ 0(20) = 0700000090813AE007000000908DF36800000000
TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
store = 0x0700000090813AE0
ext1 = 0x07000000908DF368
shmId = 0 (0x00000000)
id = 1870 (0x0000074E)
label = 32094 (0x00007D5E)
fill = 13 (0x0000000D)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000103
occu = 12 (0x0000000C)
access = 2 (ItAccessSorted)
idxKind = 1 (ItIndexLinear)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000009087FB40
pghook = 0x0700000090813D68
idxPtr = 0x0700000090813DA0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 36 (0x00000024)
lineAlloc = 36 (0x00000024)
store_id = 6875 (0x00001ADB)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x07000000908DED00
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_SX_SELDR
00001KYFNM ########300 0 ####ÿÿÿÿ#### 0 ######## ####ÿÿ
333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
G_RUNNING
0
0000
0000
L_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
L_TH_FREE
Table IT_32093[6x30]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
Table reference: 1763
TABH+ 0(20) = 0700000090813760000000000000000000000000
TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
TABH+ 40(16) = 040002DB00001B800010831401000000
store = 0x0700000090813760
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1763 (0x000006E3)
label = 32093 (0x00007D5D)
fill = 6 (0x00000006)
leng = 30 (0x0000001E)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000116
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908137B8
pghook = 0x0000000000000000
idxPtr = 0x07000000908139B0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6874 (0x00001ADA)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_ACTIVITY
03
33
03
SY-UNAME
S51643
533333222222
351643000000
S_MULTICUBE
222222222222222222222222222222
000000000000000000000000000000
E_SUBRC
0
0000
0000
%_VIASELSCR
0
4
S_CHANM
222222222222222222222222222222
000000000000000000000000000000
I_RAISE_EXCEPTION
X
5
8
RS_C_TRUE
X
5
8
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FORM
Name BASIC_QUERY_DATA_GET_ROLAP
E_T_DATA
Table[initial]
E_END_OF_DATA
2
0
C_FIRST_CALL
X
5
8
S_S_QPARAM
XX 0 ##ÿÿÿÿ####DB-VIEW R ###dABAP-TABLE
25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
C_S_QPARAM-AUTHORITY_CHECK
R
5
2
RSDRC_C_AUTHCHK-NONE
2
0
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RSD_C_DPANM
0REQUID 0CHNGID 0RECORDTP 0IOB
3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
SPACE
2
0
I_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
I_TH_SFC
Table IT_32090[14x128]
I_TH_SFK
Table IT_32091[2x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
Table reference: 1767
TABH+ 0(20) = 0700000090887AC00700000090813CD800000000
TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
TABH+ 40(16) = 040002DB000018380010839421000000
store = 0x0700000090887AC0
ext1 = 0x0700000090813CD8
shmId = 0 (0x00000000)
id = 1767 (0x000006E7)
label = 32091 (0x00007D5B)
fill = 2 (0x00000002)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000101
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090884C90
pghook = 0x0000000000000000
idxPtr = 0x0700000090827A98
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6857 (0x00001AC9)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813B38
hsdir = 0x0000000000000000Have you check or trace Authorization??
In DUMP:
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ". -
I was gettiing runtime error while executing a Webdynpro-ABAP application
Hi,
I am working on Webdynpro-ABAP and created a ALV report using Service call BAPI method in IDES version. After creating component and designed view and created Webdynpro application. While executing application I am getting some error in explorer.
For any application I am getting same error.
I think some setting in explorer..I am not sure. If yes how can I rectify ?
waiting for quick response.
I am giving details error below what I faced.
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_bapiflight was not called due to an error.
Note
The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20091226 -t: 135942 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Best Regards,
BDPhi
It is the Fully Qualified Domain Name (FQDN) error . Refer SAP online help :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
refer the similar thread :
Problem executing sample Webdynpro application
regards,
amit -
Portal Runtime Error while executing GP tasks from UWL
Hi all,
I am trying to create a process in Guided Procedures.
The activities involved in this process include calling some standard R/3 transactions.
For this, I first created Portal Iviews of the SAP R/3 transactions involved. Then In GP Design time, I created corresponding callable objects of type Portal Iviews.
User's can view the tasks assigned to them in their UWL without any problems. To execute a particular task, user clicks on the corresponding Work item in UWL.
However, this gives a portal runtime error.
The log file has the following error.
com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#LAAJ#9176##LTIVSH01.vshodc_LP1_11774250#LAAJ#4474b4ce1db811ddba24001871775ce5#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Java###04:38_09/05/08_0046_11774250
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;<System.ConnectionString>&\#39;; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute:
System: &\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;ConnectionString&\#39;.
Please suggest a solution for this problem.
Regards,
PrekshaDear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards
Maybe you are looking for
-
MRP Out Put Schedule lines date format to month
Hi Friends, I am working on SAP4.7 Version. I have maintained all the relavent MRP datas in material master. Like MRP type - PD, Lot Size- MB ( Monthly Lot size). I have created planned independent requirement in MD61 monthly wise for that material.
-
Mapping canvas of the mapping editor doesn't display
I don't want to reinstall the OWB, I've tried on everything on the Design Center GUI, the mapping canvas has just being hiding somewhere seeing me tearing my hair. I will almost die. But all the pluggable mappings show their mapping canvas as they di
-
SQL Expression field is grayed out
The SQL Expression filed is grayed out, how can I enable it? Thanks.
-
Hi. I've just moved from Gigastudio/cubase/pc to Logic/Mac and I'm having trouble using new ESX24 samples I'm installing onto the ESX24 sampler. The notes are not mapped out properly across the keyboard - it only seems to use/see two of the samples w
-
How to display the images in the custom pluggable navigation.
Hi, I have created a custom pluggable navigation and i need to show my custom images for the tabs in the primary navigation. where do i need to put my images and how will i need to render the images. Any thoughts will be helpful. Thanks in advance -