Mapping Samples on EXS24

Hi.
I've just moved from Gigastudio/cubase/pc to Logic/Mac and I'm having trouble using new ESX24 samples I'm installing onto the ESX24 sampler.
The notes are not mapped out properly across the keyboard - it only seems to use/see two of the samples within an instrument, and then maps thos across the keyboard with no changes in pitch. I'm installing them according to the instructions. Do I have a bug? Am I overlooking something? Any help much appreciated.
Cheers.

I'm using the conversion with .gig samples. But it's also doing the same thing with EXS24 samples that I install myself (the ones supplied with logic are mapped fine). I'm starting to think there's a bug in my installation somewhere.

Similar Messages

Key Mapping Sample

Hi
Is there any simple key mapping sample?
I would like to create a protoype loading (manually) a materials base from different sources (companies) and later try to create key mapping, in order to understand how this key mapping works.
Regards,
Ronaldo.

Hi Roman
Thanks for your answer.
As I am beginner in MDM, I am not even sure if key mapping is what I need.
What I want to do is:
- Simulate a group with 3 companies. In this group each company has its own materials database. So, let's suppose a certain material has a different code in each company.
- In company A, this material is called A1.
- In company B, this material is called B1.
- And in company C, C1.
After these material bases have been loaded in MDM, someone would analyze these products, and based on there coincident physical characteristics conclude: OK, all are the same material. All these materials would receive a UNIQUE identification, which could be used to generate cross-company reports, allowing these "different" products be grouped together (or compared).
This UNIQUE Identification should be something like below:
Product Company   Unique Code
A1       A         X001
B1       B         X001
C1       C         X001
Is that the objective of Key mapping?
If so, I am having some problems to make it works:
- There is a agency field in Key Mapping. What it means? Would it be the same as "company" in example above? If so, why there is no Agency field in records that I insert manually...I feel I am missing some important concept here.
- When I insert a key mapping for my second product, the key mapping for the first one is delete. Why?
Definitively I know that my questions are very basic (and boring, probably). If there is a tutorial for newbies, I would appreciate.
Regards,
Ronaldo.

Class mapping sample code error

Hi !
There is an error in a Developers guide mapping sample code: p.156-157.
(Examples 7.11,7.12 and 7.13).
For example, in 7.12 we have:
<class name="Tabloid" persistence-capable-superclass="Magazine">
<extension vendor-name="kodo" key="jdbc-class-map" value="flat"/>
.... indicator extensions ...
.... field metadata ...
</class>
instead of jdbc-use-class-map in the key attrribute of the extention tag.
Please, fix it.
Best regards,
Alex.

Actually the sample is correct. It shows the mapping information if you
are using metadata extensions in place of .mapping files. To map a class
via metadata extensions, you use the "jdbc-class-map" extension key.
This is distinct from the "jdbc-use-class-map" key, which you can use to
tell the mapping tool what kind of mapping it should create. So in sum:
jdbc-class-map: Used at runtime by the MetaDataMappingFactory to map a
class to its schema.
jdbc-use-class-map: Used at dev time by the MappingTool to indicate that
the user wants a specific type of mapping to be installed.

Any Flash CS3 AS3 Map samples available that work in AIR?

Any Flash CS3 AS3 Map samples available that work in AIR?
Like Google or Yahoo.
The ones that I have tried fail to work when making the final
AIR app.

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

Import samples into exs24

How do I impros .exs samples into exs24?

basically you put them in a folder called SAMPLER INSTRUMENTS which is found at LIBARY / APPLICATION SUPPORT / LOGIC / SAMPLER INSTRUMENTS
http://documentation.apple.com/en/logicexpress/instruments/index.html#chapter=9% 26section=22%26tasks=true

Converting audio samples to EXS24 instrument

I have an audio track that contains a sequence of samples from a live instrument. The samples run from C0 to C7 in increasing order.
What's the easiest way to turn this into an EXS24 instrument?
Thanks
Eric

First slice the track using the Strip Silence function (in L9 you could also use Flex mode to splice the track), then convert all the resulting regions into new Audio files using the copy/convert function. Then drag all those files into the EXS (hit the edit button first) using the contiguous mapping feature, set the lowest note to C0 or wherever you want the mapping to start.

Problem with Samples in EXS24

Hello Community,
i use the EXS24 as Drum-Sampler in Logic. I load some Drum Hits (.wav) into the exs24 and record my drums tracks.
But sometimes I have the following problem:
I load a .wav file into the exs24 but it sounds not like the original .wav sound in the finder preview or in quicktime - its totally blurred and u here a loud noise - so i cant use it for my music... i cant understand where the problem is, because i load it into the sample like always! Is a wavefile with 2,9 MB to big for this sampler??
Can somebody help me to get this to work?
Thanks

found a solution that worked for me with same problem, turned out the samples I was using were 32 bit.
Go to media>bin>add audio file
then add all the files to your bin. drag the files from bin into exs24.
hope this works for you as well!

Java Mapping sample code

HI all,
I want to learn how java mapping can be done in XI.
I have created a javaMapping class implements StreamTransformation .
I am not getting what code should be written in execute method. I have included all the jar files required.
Please can anyone give me a sample code that should be written in execute method for a simple Message mapping.
I presume we use jaxp Api for that,but I am not getting the exact way to proceed further.
Thanks
Yomesh

Thanks Anad And Shridhar,
I am able to do java mapping now.Actually I was not understanding how the input schema will be read and converted into output schema. Now I got that the DefaultHandler class's methods like startDocument EndDocument ,startElement and EndElement takes care of this. We have to just implement these methods and they are called automatically when corresponding tags are read.
Thank You verymuch for your help,
Yomesh

Any suggestions for choir and Gregorian voice samples for EXS24?

I need good choir and Gregorian voice samples for the EXS24 and have not found much to choose from on the internet. Spectrasonics' Symphony of Voices is $500 and is not EXS24 format although they claim because it is Akai format, EXS24 should read it. Still, it's a lot of cash to drop on a sample set without it being in EXS24 format. I need choir and Gregorian voices that will work well for a gothic sound. Can anyone suggest anything? Thanks.

The Spectrasonics set is very, very good, and it converts into the EXS (from the Akai, at least) quite nicely.
Whether or not it's worth that kind of doe is only something you can decide. I never regretted buying that library though. The Pop stacks are worth it alone if you ever need "Enya" type vocal pads. I still haven't found anything better.
And the specialized stuff, like the Gregorian chants, is all extremely well done.

Little abap mapping sample

Hi everyone.
I'm a two years old abap programmer and i would like to understand how abap mapping works.
I've read a sap document with a code sample but i don't understand it very well.
I've defined a message type containing 2 fields, name and age. This structure has cardinality of 1..unbounded.
I want to make and abap mapping and have one outbound estructure containing the result of the 'collect' instruction' in abap. the output structure is the same as the input one.
Thanks for the help.

inigo,
I have seen many of your posts and you did not assign points to the folks who answered.
I request you to reward the people who have replied to your posts. IF you consider that the replies have helped u , assign
2 points -- helpful
6 points -- very helpful
10 points -- problem solved..
If u are not able to see the assign point s button refer to this thread...
Unable to award points
People in the forum spend their valuable time answering questions. It is courtesy to do so.
regards
Shravan

How to eliminate some samples in exs24?

Consider the exs24 violas (orchestral->strings->viola section). There are two zones (upbow and downbow) which are active when this instrument is chosen (these are the only rows with the "on" box checked), and there are two sets of samples for each zone, one set for velocities 0 - 110, another for 111-127. (I see this in the "Vel. range of the exs24 editor.) The loudness break is clearly heard, with a significant velocity jump and a much greater slope of decibels vs velocity for the upper range. This "feature" makes it difficult to control dynamics in compositions.
So I (thought I) eliminated the higher-velocity samples by simply deleting all the 111-127 rows in the upbow/downbow zones. I then changed the velocity range of the remaining rows to 0 - 127. I saved the edited instrument under a new name.
The problem is that, when I now create a new software instrument track with this new instrument, the break at 110 is still there, so it sounds like the two sets of samples are still being used. However, the editor shows only one set of samples with velocity range 0 - 127.
It doesn't seem that the velocity is automatically non-linear, since for example with Steinway piano club, the break is around velocity 105, and is not as pronounced as for the viola. (The cello is even worse.)
Is this a bug or did I miss something?
Thanks in advance.
P.S. I could use only velocities below 109 in my compositions, but the problem is that the viola sample at low velocity and low pitch is noisy and very ugly and I would have to modify the "legato" instrument to get rid of that. So I need to solve this problem.

The original document was an imported simple(!) Word file without any TOC . . .
I created a guest user account on my computer and started from the beginning with a new document in Pages. The problem did not show up. TOC looked as expected.
Logging back in to my regular user account on my computer I created two new Pages docs and TOC's also looked fine.
I created a new Pages doc and attempted to copy/paste body text and objects from my original doc imported from Word and the TOC period problem came back.
Seems to be a strong suggestion here of a connection with Word corruption.
I will now begin to hand type the text into a new Pages doc . . . it's only 5000+ words or so . . . I'm tempted to say wryly, "thank YOU, Microsoft", but not being 100% sure of that, I'll just be quiet and continue typing . . .

AKAI S1000 samples into EXS24 - but from floppy....

Got quite an extensive collection of samples for my old AKAI S1000 on floppydisks. I've been converting AKAI format CD-ROMs into EXS24, so I know 'bout this routine. But what about my floppies (MS-DOS formatted AFAIK)??? Sample Dump into Logic Pro?? Got the Digital I/O card installed - but not the SCSI-card. What are my options here?
Thanks!

Now I've tried reading from a Lacie USB floppy drive with Akai Convert open in EXS24 - but it will not recognize the disk - just saying "Waiting for Akai CD..."
I tried Chicken Systems Translator Free on both Mac and PC - no recognition...
I tried AKAIDISK.EXE on a PC, but it misses some system files not implemented in XP - so I guess I need to run the app in Win98. Downloaded the VBRUN300.DLL file so the app will open, but will not find the floppy as source disk.
Is it possible that the USB floppy can be the problem? That I'll need to read from an internal floppy drive??? I have verified the Lacie drive that it reads DOS and Mac formatted disks - no problem. Just NOT those S1000 disks...

Loading Samples Into EXS24

I have many cd's with .wav samples that I would like to load into the EXS24. Can someone give me STEP-BY-STEP instructions on how to get these into the folder they should be in so the EXS24 can read and load them...or any other possible solution for playing these sounds. Also, instructions on loading samples into Ultrabeat would be greatly appreciated...!!!!
G5 Dual 2.5 Ghz Mac OS X (10.4.6)

Create an EXS24 track/instance
Open EXS Inst editor (from audio menu)
Instrument>New
Name/save to
Select this inst in the EXS24 plugin
Drop your files on the EXS Inst editor keyboard, save, continue editing
Make sure your audio files are in the directory you want them to be referenced from... or use Project Manager to move them.
Ultrabeat supports drag + drop too. Under Osc 1, hit sample and drag+drop on the box. There are many settings so... the volume and effects may come in to play.
Cheers, J

How to install 3rd party samples in EXS24

Hi all,
The sample files are already in .exs format, and I have dropped them in:
~Library/Application Support/Logic/Sample Instruments
with the existing EXS24 samples.
However, even though the newly added files appear in the EXS24 index, there are no sounds when I choose a file.
I get a "File not found error".
What didn't I do?

From the manual:
+In order to be visible within the EXS24 mkII Sampler Instruments menu, instruments must be stored in the Sampler Instruments sub-folder of any of the following folders:+
+• ~/Library/Application Support/Logic: User-defined or edited instruments are stored here.+
+• /Library/Application Support/Logic: Factory-supplied EXS instruments are installed here.+
+• /Applications/Logic 6 Series: EXS instruments of the Logic 6 Series are stored here.+
+• …/ProjectName: Logic Pro also searches for EXS Instruments in the project folder.+
+Note: You can store your sampler instruments in any folder on any of your computer’s hard drives. If you create an alias pointing to this folder within the Sampler Instruments folder (located in the folders listed above), the instruments are displayed in the Sampler Instruments menu.+
Once they're in the right place, EXS24 should find them if you ask it nicely to refresh the list.
If that isn't happening, ask me again…

ABAP MAPPING SAMPLE SOURCE

Hi,
I have to make abap mapping like bellow it.
Sender
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Legacy_Msg xmlns:ns0="http://test/xi/test001">
     <item>
          <A>TEST1</A>
          <B>TEST2</B>
     </item>
     <item>
          <A>TEST2</A>
          <B>TEST3</B>
     </item>
</ns0:Legacy_Msg>
Receiver
<?xml version="1.0" ?>
<MsgOut>
     <item>
          <C>TEST1</C>
          <D>TEST2</D>
     </item>
     <item>
          <C>TEST2</C>
          <D>TEST3</D>
     </item>
</MsgOut>
I want to get result like over.
I don't know how to code abap mapping.
Please help me.
Thanks.

check "How to Use ABAP Mapping in XI 3.0" in this
http://www.erpgenie.com/sap/netweaver/xi/howto.htm

Mapping Samples on EXS24

Similar Messages

Maybe you are looking for