Runtime exception caught in Message mapping
Hi,
I have a scenario where I am splitting the source message and map them to 3 different target structures.
When I test the scenario in the Mapping under Test tab it is throwing an error as follows:
RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/Target1/xmlJob. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd.
The result for one of the target message in message mapping as follows: Is there some problem with the below lines in bold letters:There is a UDF which causing this transformation.
Please give some inputs on this.
Start tag [ns1:MT_O_T3]
Add raw attribute [ xmlns:ns1="http://pharma.com/"]
Start tag [Row]
Start tag [Title]
Put value [job titile]
Close tag [Title]
Start tag [JobID]
Put value [reference # 1]
Close tag [JobID]
Start tag [Country]
Put value [US]
Close tag [Country]
Start tag [City]
Put value [Mawo]
Close tag [City]
Start tag [State]
Put value [SA]
Close tag [State]
Start tag [ZipCode]
Put value [50123]
Close tag [ZipCode]
Start tag [Cname]
Put value [ ]
Close tag [Cname]
Start tag [Cphone]
Put value [ ]
Close tag [Cphone]
Start tag [Cemail]
Put value [ ]
Close tag [Cemail]
Start tag [Cweb]
Put value [http://www.pharma.com/]
Close tag [Cweb]
Start tag [Category]
Put value [9901]
Close tag [Category]
Start tag [Travel]
Put value [100]
Close tag [Travel]
Start tag [Telecommute]
Put value []
Close tag [Telecommute]
Start tag [JobType]
Put value [Executive]
Close tag [JobType]
Start tag [Clearance]
Put value [None]
Close tag [Clearance]
Start tag [Education]
Put value [1]
Close tag [Education]
before check 50000
after check 50000
before check 100000
after check 100000
after average 75000
Start tag [Salary]
Put value [Avg: 75000]
Close tag [Salary]
Start tag [Suitable]
Put value [ ]
Close tag [Suitable]
Start tag [Expire]
Put value [23]
Close tag [Expire]
Start tag [Sdesc]
Put value [job titile]
Close tag [Sdesc]
Start tag [Ldesc]
Put value [null]
Close tag [Ldesc]
Start tag [Requirements]
Put value [test description]
Close tag [Requirements]
Close tag [Row]
Close tag [ns1:MT_O_T3]
Thanks
BPR
u replied that u r getting the erro while testing it from test tab.
Ur mapping is not correct check the same which i told u in my previous reply.
r u using any FCC.
chirag
Similar Messages
-
Reg: Runtime exception occurred during application mapping
Dear SAP Gurus,
This is Amar Srinivas Eli working currently on SOAP to SOAP Scenario on PI 7.1 Server.
I Would like to inform you that I have done all steps regarding DESIGN and CONFIG and also regarding SERVICE REGISTRY part successfully.
While Testing the data in the WS Navigator by giving the input parameters I am getting an error that
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- <!-- Request Message Mapping*
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_HRS_LISTReferral_Response_MM_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns1:PI_ListRefer</SAP:P3>
<SAP:P4>ral_Response_MT. Values missing in queue context.~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_HRS_LISTReferral_Response_MM_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:PI_ListReferral_Response_MT. Values missing in queue context.~</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
These are the steps I did while implementing..
1. Importing the XSD's successfully
2. Developed the design and config part and also checked nearly 3-4 times regarding both REQ and
RESPONSE Mappings.
3. I already checked the link of WSDL once again...
4. Even I found REsponse Interface once again...
Still I am not getting where the error was ? Please guide me in detail in a right way in this issue.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 13, 2009 7:53 AMHello,
I already checked all those queues and context fields////
Based on my Observation I found
1) As I am unable to view the SOAP BODY I increased the RUN TIME Trace Level to 3 and LOG_VAlue to 3
2) ANother most Important that I found later doing these settings are....
I found Receiver Pay LOAD and I copied that entire pay load and pasted it in
REceiver Message Mapping> Test Tab and Code->PASTED...and compared all those parameters
in the TEST TAB and DEFINITION TAB in Tree View whether all the mandatory receiver mapped
elements are coming I mean passing from source or not...
OBSERVATION::
I found that for nearly 3 fields there is a difference when I compared on Tree View in DEFINITION TAB and also parallely in the TEST TAB Tree View which I got by copied from MONI,,,,
see for example ::
CENTRE <----
> DISCHARGE DATE..
For going to CENTRE..here I found that in DEfiniition TAB...
Control Act Event-->Subject->document-->Component>Structured body> component> Section>Component>PatientCareProvisionEvent->EffectiveTime-->CENTRE
But immediately I have gone to TEST TAB and TREE VIEW and I found that respective field CENTRE is posting I mean passing any value or parameter to Discharged Date or not...
But I found that...
Control Act Event-->Subject->document-->Component>Structured body> component> Section>Component-->_PatientCareProvisionEvent_
This Implies that Effective Time and Centre are missing in the XML and I mean no values are passing to receiver right..
In PI XSD 's it is there but in I think after Compiling REQUEST MAPPING and while in returning to RESPONSE MAPPING I mean whenever the Response is posting to SOAP WEBSERVICE it is unable to found those target elements and I think due to this...
Am I Correct ?
If that is the case...Let me know where the issue is whether in the data present in the WEBSERVICE created on target side or in PI Side..any issue...
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 13, 2009 10:00 AM -
Runtime exception occurred during application mapping
Hi All,
Please find the error message which we are getting:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Request Message Mapping
-->
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_CRM_COD_ProductCategoryHierarchy_R~</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:ProductCateg</SAP:P3>
<SAP:P4>oryHierarchyMassReplicationRequest/ProductCategor~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_CRM_COD_ProductCategoryHierarchy_R~; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:ProductCategoryHierarchyMassReplicationRequest/ProductCategor~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please give your expert Advice on the same.
Regards
RKDear Rableen,
As Muniyappan and peter told about the mandatory field value is missing for the target element
"/ns0:ProductCategoryHierarchyMassReplicationRequest/ProductCategor", I am able to see other fields are also not getting input data.
as below
"Cannot create target element /ns0:ProductCateg"
Request you to test with the payload in message mapping and activate the message mapping first and then edit your operation mapping and call the same message mapping in your operation mapping and activate all your objects.
Thank you!
Regards
Hanumantha Rao -
Runtime exception occurred during application mapping in SAP PI
Hi Team,
Please help me regarding this issue is very urgent:
Runtime Error in configuration part:
Here i test the XML message in Receiver Determintion:
Below i am getting error:
Runtime exception occurred during application mapping com/sap/xi/tf/_MaterialStockUpdate_Multi_AllPlant~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The processing instruction target matching "[xX][mM][lL]" is not allowed
SXMB_MONI:
I am getting below error:
Runtime exception occurred during application mappingHi,
Actually my problem is what i am getting,I am trying to test the data in runtime workbench and configuration part copied from inbound payload XML structure .
I already sent the screenshots of above errors,
Configuartion:
Runtime workbench:
This the error i am getting below in "Runtime Workbench"
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=MHEPL_Sandbox_100;TS=;AN=MaterialStockUpdate_Multi_AllPlants_N;ANS=http://www.manipalhospitals.com/his/mm; in the current context [Unknown]. -
Runtime exception occurred during application mapping "EXCEPTION_DURING_EX"
Hi Gurus,
I am getting following error in MONI:
SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_MDM_CMS_Backfeed_Group_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.MessageMappingExceptio</SAP:P2>
<SAP:P3>n: Runtime exception when processing target-field</SAP:P3>
<SAP:P4>mapping /ns0:BackfeedGroup/group/MasterId; root m~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_MDM_CMS_Backfeed_Group_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns0:BackfeedGroup/group/MasterId; root m~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have tried to refresh the mapping cache and restart the message but stil this message persists.
For me it seems an issue with a wrong mapping or some wrong value in the inbound scenario.
Please suggest if any one of you had come across this error before.
With Reg,
VikashHi Vikash
Whenever you have a problem in your mapping you will get this kind of error in monitoring
According to your log the problem is in parameter /ns0:BackfeedGroup/group/MasterId
First of all check your mapping. If it is fine than check the value of this parameter from your payload.
Also try to copy your xml and test the mapping in IR. Check wether you are getting same error there .
If same error comes than try to manipulate the value of that field and try the same test again
Regards,
Shradha -
To get exception value in Message Mapping
Hi folks,
I would like catch bpm step exception in one message mapping, for example:
I have create on ccBPM using one block, in block i have createad "ex" exception variable and set ex in all step (send and transformation), i have created one exception branch in block using "ex" exception.
How can i get "ex" value and pass for one message mapping ?
In MM how can i get text values from excpetion ocurred in ccBPM ?
Im am trying using Global Variables but not found any parameter of exceptions.
Can anybody help me, please?hi,
>>In MM how can i get text values from excpetion ocurred in ccBPM ?
this is not possible
Regards,
Michal Krawczyk -
Exception Handling in Message Mapping and Alert
Hello,
1. Pls let me know the concept of Exception Handling and Alerts.
2. Pls provide some blogs for Exception Handling in Message Mapping.
3.What are Alerts and how it help us in XI. Pls provide some blogs for Alert
4.How are Alerts and Exception Handling can be related say for some scenario
RegardsHi,
Plz check out these blogs of Sravya on Error Handling:
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/sravya.talanki2/blog/2006/11/23/error-handling-framework-xiout-of-the-box-episode-2
Also check this SAP Presentation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Error Handling :
http://help.sap.com/saphelp_nw04/helpdata/en/56/b46c3c8bb3d73ee10000000a114084/frameset.htm
Alerts:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
BPM:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Working with acknowledgements
regards -
Message mapping tab works fine ,runtime exception
Hi ,
Need some advice... I get a runtime messge mapping error ( system error) failing the substring logic although when i download the same payload and run in test tab it works fine. Has anyone encountered similar issue ?
Thank you.objects are active.Your second point is good ,but this error only happens when a load test is done , partciular messages throw runtime exception and fail in mapping on substring logic but when the same payload is downloaded and run via message mapping tabl it runs through. i will try disabling the substring logic nodes.
Secondly when i get a runtime exception ,i try to restart the same message and it goes thorugh successfully. So restarting in moni helps.... but does not explain why....
Thanks
Edited by: xi project on May 18, 2010 12:28 AM -
Message Mapping Error - Runtime
Hi,
I am able to execute message mapping in graphical mapping editor succesfully. But when i include mapping in interface determination throws as error.. In sxmb_moni as shown below
i<SAP:Error xmlns:SAP=throws as error.. In sxmb_moni as shown below"http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_DEMO1_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Demo. Val</SAP:P3>
<SAP:P4>ues missing in queue context. Target XSD requires~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DEMO1_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Demo. Values missing in queue context. Target XSD requires~</SAP:Stackt
Please share your thoughts..Hi Guys,
I have done a one to one mapping, it runs fine in the editor but fails at run time.
I took the payload from moni put it in messagemapping test tab, it shows red...
I compared the payload with the payload i get after successfulll message mapping...it is the same..
yet i get red signal...
im on PI 7.1..have ne of u faced ne thign similiar? -
Error in Message Mapping "Target message IDOC: ORDRSP.ORDERS02 does not exi
Hi,
I have joined newly to the team.
When I tried to open one message mapping it throwinf follwing error...
"Target message IDOC: ORDRSP.ORDERS02 does not exist in software component version ID: 44423362454456485465..
Check whether the software component version ID: 44423362454456485465 is in Enterprise Service Repository. Import this version if necessary"
Is there any impact because of which in the message flow?
In my case some of the messages are failing with mapping error "runtime exception occured during application mapping com/sap/xi/tf/_SUS2MMOrderResponse_; java.lang.NullPointerException: while trying to invoke the method java.util.Map.get(java.lang.Object) of an object loaded from field com.sap.aii.map`"
And some of the messages are processed sucessfully and they also using the same mapping program 'SUS2MMOrderResponse'.
Could someone tell me is there any relation for the above error in XML messages and to the message mapping?
Regards
Baskaran KCould someone tell me is there any relation for the above error in XML messages and to the message mapping?
The error mentions that you have used an IDOC in your mapping program which is not found in the ESR....you need to check if the IDOC is present in the ESR and is present under the correct SWCV.
Once you have done the check do some dummy change to the mapping and activate it (if in DEV) and then check the CACHE. -
PI 7.1 Operation mapping - Multiple message mapping - one to many issue
Dear Experts,
I am facing this issue in PI 7.1 and I beleive i did similar one in PI 7.0 successfully.
I have an operation mapping with two message mappings.
The occurence of source message of operation mapping is 1
The occurence of target message of operation mapping is 0..unbounded
Corresponding i configured two message mappings
For message mapping-1
Source message occurence = 1 and Target message occurence = 1
For message mapping-2
Source message occurence = 1 and Target message occurence = 0...unbounded
When i test message mappings individually they are working good. But when i test it in operation mapping, the operation mapping is not working..as it is not able to convert single occurence output of message mapping -1 to the second message mapping-2.
Any suggestions?
Thanks.The message that i get when testing in operation mapping:
Runtime Exception when executing application mapping program com/sap/xi/tf/_MM_MessageMapping_1_; Details: com.sap.aii.mappingtool.tf7.IllegalInstanceException; Cannot create target element /ns0:MT_MessageMapping_1_TargetMessageType/RECORDSET. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
My question is, has somebody mapped similar scenario in your environment? If yes, can you please provide details.
Operation mapping : 1 to 0..unbounded
Message Mapping1: 1 to 1
Message Mapping2: 1 to 0...unbounded -
Hello everyone,
Today when iam monioring my PI i found a error description in one message saying like the one pasted below:
Runtime exception occurred during application
mapping com/sap/xi/tf/_MM_ECMREV_LOAD1_;
com.sap.aii.mappingtool.tf7.MessageMappingExceptio
n: Runtime exception when processing target-
fieldmapping /ECMREV01/IDOC/E1AERLM/USOBJ; root
messag~
I have tried to trouble shoot the map using inbound xml and found that MM is just fine. I just want to know what actually could have gone wrong and what should i do now.
Thanks in AdvanceHi,
Using parameterized mapping, we can transfer values to a mapping program at configuration time(in the interface determination). Please refer the below link for details.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/bbb7fd90f5332ee10000000a11466f/frameset.htm
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
Regards,
Priyanka -
Retrive message mapping error from java class
Hi,
I'm trying to create a scenario that if exist an error in the message mapping step this error will be inserted in a Ztable. I'm thinking in to call to the message mapping from a java class to catch the exception and this java class will be used in the interface mapping.
Is it possible? If yes, How to call the message mapping from java code?
Exists other possible solution?
I need to do it because we want store all mapping errors in a Ztable. (Customer requeriment)
Thanks, in advance
Jose Manuelyou can throw generic exceptions from the message mapping like this - /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
you can then decide how to handle these exceptions -
Hello Experts,
I am configuring the scenario ( AS2 to EDISeparator and EDISeparator to IDOC ).
Can you please help me with the error below which is from the either the EDISeparator Receiver channel or the EDISeparator Sender channle.
09.06.2014 17:52:18.709
Information
Message is encrypted with 1.3.14.3.2.7 algorithm
09.06.2014 17:52:18.778
Information
AS2 Message is signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.779
Information
AS2 Message message signature is validated, signer ID is X509CertSelector: [ Serial Number: 1624063516 Issuer: CN=Mendelson AS2 TEST,OU=Integration,O=Mendelson,L=Berlin,ST=Unknown,C=GE matchAllSubjectAltNames flag: true ]
09.06.2014 17:52:18.784
Information
AS2 document size is 350 Bytes
09.06.2014 17:52:18.784
Information
Payload charset converted from ISO-8859-15 to ISO-8859-15
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule : EDI format detected as EANCOM
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule: Message will be read as ISO-8859-1.
09.06.2014 17:52:18.785
Information
MP: processing local module localejbs/EdifactConverterModule
09.06.2014 17:52:18.785
Information
0}: The module-paramteter "eancom.subversion.prefix" is not set. Using default value "false"
09.06.2014 17:52:18.786
Information
0}: The module-paramteter "eancom..audit" is not set. Using default value "false"
09.06.2014 17:52:18.791
Information
MP: processing local module localejbs/CallSapAdapter
09.06.2014 17:52:18.791
Information
Application attempting to send an XI message asynchronously using connection AS2_http://sap.com/xi/XI/AS2
09.06.2014 17:52:18.792
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.831
Information
Message successfully put into the queue
09.06.2014 17:52:18.831
Information
The application sent the message asynchronously using connection AS2_http://sap.com/xi/XI/AS2. Returning to application
09.06.2014 17:52:18.836
Information
MIC (DeJYUIusqQj6aaYRASdHhAo+4J0=) is calculated using SHA1 algorithm.
09.06.2014 17:52:18.838
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.843
Information
Message status set to DLNG
09.06.2014 17:52:18.845
Information
MDN is succcessfully signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.859
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.912
Information
Message successfully put into the queue
09.06.2014 17:52:18.913
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.918
Information
Message status set to DLNG
09.06.2014 17:52:18.961
Information
Trying to put the message into the send queue
09.06.2014 17:52:19.001
Information
Message successfully put into the queue
09.06.2014 17:52:19.001
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:19.006
Error
MP: exception caught with message No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.006
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
09.06.2014 17:52:19.006
Information
Message status set to DLNG
09.06.2014 17:52:19.009
Error
Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.010
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.015
Information
The asynchronous message was successfully scheduled to be delivered at Mon Jun 09 17:57:19 CEST 2014
09.06.2014 17:52:19.015
Information
Message status set to WAITHello Ruchir Sinha and Dimitri Sannen,
I think I have progressed a bit. Just unsure of the usage of the Module configuration .I now get a new error (see below) and the updated config details are :
Sender Interface :
Receiver Interface :
Sender AS2 config :
Receiver EDISeparator config :
Sender EDISeparator config :
Receiver IDOC config :
IDoc details configured but not added in this document
16.06.2014 11:52:35.414
Information
The message was successfully retrieved from the send queue
16.06.2014 11:52:35.420
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
16.06.2014 11:52:35.420
Information
MP: processing local module localejbs/ModuleProcessorExitBean
16.06.2014 11:52:35.420
Information
Message entered AF MP exit bean and will now be passed to the JCA adapter
16.06.2014 11:52:35.420
Information
Message status set to DLNG
16.06.2014 11:52:35.433
Information
UNA segment UNA found
16.06.2014 11:52:35.444
Information
Parsed UNB segment 333333333/014 to 111111111/014
16.06.2014 11:52:35.445
Information
Parsed UNH segment ORDERS D96A
16.06.2014 11:52:35.514
Information
Searching sender channel for Eancom message part message with Message type ORDERS, Message version number D, Message release number 96A, Interchange sender identification 333333333, Interchange sender identification code qualifier 014, Interchange recipient identification 111111111, Interchange recipient identification code qualifier 014, Message Subversion EAN008, Message Agency UN
16.06.2014 11:52:35.579
Information
Sender channel (Channel) keys: ObjectId=7abf551ddbb638268f91af80ec1c04c8 values: ToPartySchema= Attributes=(Attributes:Channel:EDISeparator:INBOUND) values: edisep.advanced=false snd.interchangeSenderId=.* snd.tradacommessagetype=.* snd.xpath= snd.xpath.value= snd.filterCondition=equal snd.edifactMessageReleaseNumTxt= snd.tradacomMessageTypeUsingFreeText=false snd.eancomMessageReleaseUsingFreeText=false snd.eancomMessageVersionFreeText= snd.odetteMessageType=.* snd.edifactMessageVersion=.* snd.xml.splitPath=null snd.eancomMessageVersion=.* snd.odetteMessageVersion=.* snd.edifactMessageRelNumUsingFreeText=false snd.otherVersionReleaseIndustryIdentifierCodeEnabled=false adapterStatus=active snd.vdaMessageType=.* snd.eancomCONTRLMessageRelease=3 snd.odetteMessageTypeTxt= snd.tradacommessageversion=.* snd.edifactMessageVerNumUsingFreeText=false snd.edifactMessageTypeUsingFreeText=false snd.xpathUsingFreeText=false snd.interchangeSenderIdCode=.* snd.otherVersionReleaseIndustryIdentifierCode=.* snd.odetteMessageTypeUsingFreeText=false snd.tradacomreccode=.* snd.edifactMessageVersionFreeText= snd.edifactInterchangeRecipientIdentification=.* eoio.sequenceId= snd.edifactMessageTypeTxt= snd.odetteMessageVerNumUsingFreeText=false snd.eancomMessageVerNumUsingFreeText=false snd.interchangeReceiverId=.* snd.eancomMessageRelease=.* snd.tradacomsendername=.* snd.tradacomMessageTypeTxt= snd.vdaLieferantenNummer=.* snd.interchangeReceiverIdCode=.* snd.edifactInterchangeSenderIdentificationCode=.* snd.odetteMessageVersionFreeText= snd.versionReleaseIndustryIdentifierCode=.* snd.edifactInterchangeSenderIdentification=.* snd.edifactMessageType=.* snd.eancomMessageType=.* snd.xpathTxt= snd.vdaMessageTypeTxt= deliverySemantics=eo snd.eancomMessageReleaseTxt= snd.plainmessagetype=.* snd.xml.split=false snd.edifactMessageRelease=.* snd.vdaMessageTypeUsingFreeText=false snd.tradacomrecname=.* edisep.addParameterParams=TableData: edisep.addParameterParams {} snd.encoding=iso885915 snd.vdaKundenNummer=.* snd.tradacomsendercode=.* snd.edifactCONTRLMessageRelease=3 snd.edifactInterchangeRecipientIdentificationCodeQualifier=.* snd.transactionSetIdentifierCode=.* Service=ASJAVA_DX5 Channel=B2BSE00002_O2C_ORDERS_PO_ECC_READ_EDISeparator EngineType=CA Party= TransProt=XI TransProtVers=1.0.0 FromPartySchema= FromPartyAgency= Direction=I MsgProt=EANCOM MsgProtVers=1.0.0 EngineName= AdapterType=EDISeparator AdapterSWCV=06c536e6fafe11e0bb1cea8f0a4290b1 ToPartyAgency= AdapterNamespace=http://sap.com/xi/XI/EDISeparator found. New message ID is f18894a8-f53b-11e3-a748-00001e96c7e2
16.06.2014 11:52:35.586
Error
MP: exception caught with cause javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.586
Error
Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.590
Error
Exception caught by adapter framework: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.591
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule -
Replacing & with & in message mapping
Hi,
In my scenario I'm using Graphical mapping tool and I have to replace the & that's coming in the input xml with & in the output with in the message mapping, Is Value mapping is the only solution or do we have any other options that we can use for this.
Basically I'm getting runtime error in the message Mapping since I had a & in the value which is not recognized.
thanks,
Joe.PHi Bhavesh,
My scenario is RFC-ABAPProxy--XI- File.
so the RFC is sending me as & instead of &.
this is what I see in the my incoming xml and this failing during runtime.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0=" http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<nr1:MT_HCMPositionData xmlns:nr1="http://XXXX.com/xi/HCM/Recruitment ">
<PositionIDs>
<PositionID>20008644</PositionID>
<Position_Desc>Director Finance M&A_Dept771_SSC7000</Position_Desc>
<Job_Code>Director Finance M&A</Job_Code>
<Staffing_Stat>1</Staffing_Stat>
<Org_Type>DEPARTMENT</Org_Type>
</PositionIDs>
</nr1:MT_HCMPositionData>
</ns0:Message1>
</ns0:Message1>
Maybe you are looking for
-
Running Dual boot windows 8 and win 7 pro with xp mode installed!! I love it!!
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!! Step 1: using diskmgmt.msc you have to shring the C partition. I shrunk it so I had 80GB remaining as unallocated s
-
How can I sync at least 2 hard drives my G4?
I have now 4 hard drives on my MAC 1.25 GHz Power PC G4. The reason I have so many, I run out of space working with many large movie files all at one time. Unfortunately my Mac system, applications, mail, internet, composer and movie applications are
-
Hello- The type in all my programs/apps etc. is so light it's barely legible. The problem started 4+weeks ago with distorted colors in IPhoto. I posted the problem on these boards, and got great help from TD..but I wasn't able to resolve it because t
-
While watching netflix, screensaver engages, movie still playing audio OK
While I'm watching a movie on Netflix, the Apple TV screen saver slideshow starts - while the movie is still running, I can hear it. If I "wake" it up with the remote - the movie is in the right place. This happens after a few minutes. Any idea why t
-
HTML inside .swf?
Is there any way to use flash to show html? Something similar to an iframe if it can't display it naturally. Maybe something could be accessed externally in the browser?