Russian font problem in Safari/mac

Hi all.
I have a problem concerning character encoding when I use Safari under Mac.
I am a developer. All the texts in my site are shown normally, only one text group, that comes from another SQL table, isn't encoded normally (Russian letters aren't shown).
Maybe the problem is in my SQL tables? But both of the tables (the one, the text of which isn't shown, and the one, that is shown normally) have character set UTF8.
I don't know where to look for the problem...
I would appreciate any help!
Lili

I am actually sure that the porblem text is in UTF 8, because this is the encoding used for the SQL table, and the text is taken from this table =>concequently it has UTF-8 encoding, right?
Not necessarily. Declaring something to be a certain encoding doesn't make it so. It is not uncommon to find data entered somewhere in the wrong encoding. On a web page, you can use View > Text Encoding to switch the encoding which a browser uses to read a text and thus perhaps find out if it is something other than what it is declared. If it is practical in your case you might try the alternative cyrillic encodings available in Safari on your problem text.

Similar Messages

  • Font Problems with Safari

    I've been trying to fix this font problem I'm haveing. I go someplace like ebay and most of the fonts are fine but some fonts are not the ones I want. And when I go to the perfences nothing happens. Then I go to the font book and I can't find the font. I tryied to reset Safari and stills the same problem.
    Macbook Pro, Intel Imac, PowerMac Quad G5   Mac OS X (10.4.8)  

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and the support article linked below for instructions. If Font Book finds any issues, resolve them, then boot in safe mode* (by holding down the shift key at the startup chime) to rebuild the font caches. Boot again as usual and test.
    Mac 101: Font Book
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.

  • Russian Font Problem

    I have installed Russian fonts on my IBM PC, but the characters are displayed as jibberish. The Russian language option does not appear in the Paragraph Designer > Language drop down menu. How do I resolve this issue? I am using FrameMaker 9. Thanks for any advice.

    FM displays the languages available using the appropriate language specific glyphs. For Russian use "русский" :
    Can you be specific by what you mean about the characters being jibberish? Which font are you using? What keyboard input method is being used? Can you read Russian in order to determine if the entries are correct?

  • Spry Horizontal Menu problem in Safari Mac/Windows

    Hello! 
    Has anyone run into a problem using a horizontal spry menu and it showing up corectly in Safari?  The menu is centered but I cannot get the table to center underneath.  I then wrapped the table in a div and center aligned it, after addeding a <br/> (just trying stuff to no avail.)
    Here is a link to a site I am working on.
    http://tesibridal.com/NEW/index.html
    So far I have found it does not work in Safari 3.2.1/Mac & Safari 3.2.2 and gives me a whole new set of spacing problems in Explorer (which I will address all of those next).
    Thank you in advance for your time.
    ~TMC
    P.S. - Here is the CSS for the menu:
    @charset "UTF-8";
    /* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    LAYOUT INFORMATION: describes box model, positioning, z-order
    /* The outermost container of the Menu Bar, an auto width box with no margin or padding */
    ul.MenuBarHorizontal
    padding: 0;
    list-style-type: none;
    cursor: default;
    width: 55em;
    margin: auto;
    /* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
    ul.MenuBarActive
        z-index: 1000;
    /* Menu item containers, position children relative to this container and are a fixed width */
    ul.MenuBarHorizontal li
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 11px;
        font-family:Verdana, Arial, Helvetica, sans-serif;
        color:#000000;
        background-color:#FF0000;
        text-align:center;
        position: relative;
        text-align: center;
        cursor: pointer;
        width: 8em;
        float: left;
    /* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
    ul.MenuBarHorizontal ul
        margin: 0;
        padding: 0;
        list-style-type: none;
        font-size: 11px;
        color:#000000;
        background-color:#FF0000;
        text-align:center;
        z-index: 1020;
        cursor: default;
        width: 10.1em;
        position: absolute;
        left: -1000em;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
        left: auto;
    /* Menu item containers are same fixed width as parent */
    ul.MenuBarHorizontal ul li
        width: 10.1em;
    /* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
    ul.MenuBarHorizontal ul ul
        position: absolute;
        margin: -5% 0 0 95%;
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
        left: auto;
        top: 0;
    DESIGN INFORMATION: describes color scheme, borders, fonts
    /* Submenu containers have borders on all sides */
    ul.MenuBarHorizontal ul
        border:#000000;
        border-style:solid;
        border-width:1px;
    /* Menu items are a light gray block with padding and no text decoration */
    ul.MenuBarHorizontal a
        display: block;
        cursor: pointer;
        background-color: #FF0000;
        color: #000000;
        text-decoration: none;
        border:#000000;
        border-style:solid;
        border-width:1px;
        padding-top: 1em;
        padding-right: 0em;
        padding-bottom: 1em;
        padding-left: 0em;
    /* Menu items that have mouse over or focus have a blue background and white text */
    ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
        background-color: #FF0000;
        color: #FFF;
    /* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
        background-color: #FF0000;
        color: #FFF;
    SUBMENU INDICATION: styles if there is a submenu under a given menu item
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenu
        background-image: url(SpryMenuBarDown.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
        background-image: url(SpryMenuBarRight.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarDownHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    /* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
    ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
        background-image: url(SpryMenuBarRightHover.gif);
        background-repeat: no-repeat;
        background-position: 95% 50%;
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarHorizontal iframe
        position: absolute;
        z-index: 1010;
    /* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
    @media screen, projection
        ul.MenuBarHorizontal li.MenuBarItemIE
            display: inline;
            f\loat: left;
            background: #FF0000;
    Message was edited by: TMCDesign
    Message was edited by: TMCDesign

    Hi clead16,
    What do you mean by "do not load properly in internet
    explorer"? I checked the site in IE6 and IE7 and it the menus
    render OK.
    You may want to also take a look at the
    Menu
    Samples and
    centering
    a horizontal menu
    on Adobe labs.
    -- Florin

  • Font problem in Safari

    Some pages in Safari show up as gibberish. This started happening after I cleaned out my font library. I tried re-installing the system but I'm having the same problem. Anyone have any ideas?
    Thanks.

    I had loaded way too many fonts and it was slowing my apps so I decided to delete the ones I rarely use. I don't know if I deleted a system font or I just have corrupted fonts. I re-installed my OS hoping it would fix it but it hasn't. I also checked my other computer, which is working fine, and copied the fonts and added the missing ones to my problem computer. I also tried cleaning my font cache with Font Finagler. I'm still having issues. I can e-mail you a screenshot of a problem page if that would help.
    Thanks.

  • Russian fonts problem

    "Hi
    We get wrong fonts (character set) from calling jolt connection to tuxedo
    The problem the charset that define for conversation to Unicode is good for windows
    (Power Builder environment) and not for Unix environment that run the Weblogic server
    Unix
    CL8ISO8859P5      ISO 8859-5 Latin/Cyrillic      SB, ASCII      
    Windows
    CL8MSWIN1251      MS Windows Code Page 1251 8-bit Latin/Cyrillic      SB, ASCII, EURO      
    Tuxedo server side define
    env | grep LANGNLS_LANG=AMERICAN_AMERICA.CL8MSWIN1251
    We need for weblogic server that run in Unix environment define:
    NLS_LANG=AMERICAN_AMERICA.CL8ISO8859P5
    NLS_LANG = LANGUAGE_TERRITORY.CHARACTER_SET
    Where:
    LANGUAGE     Specifies the language and conventions for displaying messages, day name, and month name.      
    TERRITORY     Specifies the territory and conventions for calculating week and day numbers.      
    CHARACTER_SET     Controls the character set used for displaying messages.      
    For exmple:
    Russian      RUSSIAN_CIS.CL8MSWIN1251      
    English      AMERICAN_AMERICA.WE8ISO8859P1      
    The result test with character set CL8MSWIN1251 define in Tuxedo
    Test 1
    testpet!VIP:/vmpuser1/vmp/vmp/api/Test/joltService> env | grep LANG
    LANG=ru
    System.getProperty- user.language ru
    System.getProperty- file.encoding ISO8859-5
    System.get

    Hi,
    could you please post this to
    weblogic.developer.interest.internationalization.
    Thanks
    Maria Salzberger
    Developer Relations Engineer
    BEA Customer Support
    yaakov lifshitz schrieb in Nachricht <3c33638f$[email protected]>...
    "Hi
    We get wrong fonts (character set) from calling jolt connection to tuxedo
    The problem the charset that define for conversation to Unicode is good forwindows
    (Power Builder environment) and not for Unix environment that run theWeblogic server
    >
    Unix
    CL8ISO8859P5 ISO 8859-5 Latin/Cyrillic SB, ASCII
    Windows
    CL8MSWIN1251 MS Windows Code Page 1251 8-bit Latin/Cyrillic SB, ASCII,EURO
    >
    >
    Tuxedo server side define
    env | grep LANGNLS_LANG=AMERICAN_AMERICA.CL8MSWIN1251
    We need for weblogic server that run in Unix environment define:
    NLS_LANG=AMERICAN_AMERICA.CL8ISO8859P5
    NLS_LANG = LANGUAGE_TERRITORY.CHARACTER_SET
    Where:
    LANGUAGE Specifies the language and conventions for displaying messages,day name, and month name.
    TERRITORY Specifies the territory and conventions for calculating week andday numbers.
    CHARACTER_SET Controls the character set used for displaying messages.
    For exmple:
    Russian RUSSIAN_CIS.CL8MSWIN1251
    English AMERICAN_AMERICA.WE8ISO8859P1
    The result test with character set CL8MSWIN1251 define in Tuxedo
    Test 1
    testpet!VIP:/vmpuser1/vmp/vmp/api/Test/joltService> env | grep LANG
    LANG=ru
    System.getProperty- user.language ru
    System.getProperty- file.encoding ISO8859-5
    System.get

  • Font problem sending from Mac Mail to PC users.

    I'm using Mac Mail - as I wanted to do away with Entourage to bring everything under the Mac umbrella. Problem is now that I have switched app. whenever I send a mail to a PC user the font changes to Times. I've tried changing my default font from Arial, to Tahoma and Verdana (all commonly used fonts in Outlook & Entourage etc) but it always comes through as Times. I can however trick it by changing the font just before I send the mail and it then comes through as the specified font.

    It's my one HUGE complaint about Mail and it is a
    simple problem. Pre-Tiger when Mail used HTML
    formatting, there was not problem. But the RTF
    formatting is bollocks.
    Pre-Tiger, Mail did not use html, it used .rtf. Tiger Mail now uses HTML. (Both are called "rich text" in Mail). But the "default" settings are for incomings, not outgoings. For outgoings you need to do it for each message with the Font Panel. And of course at the other end, the recipient has to be viewing html: If his mail client is set to read plain text, it will use his font preferences and not what you intended.
    Best to send Apple some feedback on how you would prefer that it work:
    http://www.apple.com/macosx/feedback/

  • Font problem Win to Mac?

    I have been searching all day for an answer and have run out of things to try.
    I am using D8 for my Windows app and D10 (projecter only)  for Mac because the D8 projector will no longer work on Macs (but the D8 files will witht eh D10 projector). I have D11.5 but none of my Xtras work like POM and Resx, and budi.
    I am using the Party font in my Windows app for signatures on documents and can install the font with my installer. I have no installer for Mac and so this time I tried embedding the Party font and finally got it to work.
    Now,  I have D8 files with the embedded font and they won't work with the Windows D8 or D10 projector.  What do I do to get a cursive font on the Mac from Windows?  I can't call a Mac font in Windows.  I tried the fontmap.txt file in the app directory according to the documentation, but it does not work.  I used Win: Party   =>  Mac:"Lucida Handwrriting"
    So embedding fonts according to the instructions does not work in Windows as it does in a Mac projector.  Why not? WHat am I supposed to do?  The fontmap.txt does not work according to the directions so I can't remove the embedded font in the MAc files.  So what do I do?
    How do I get a cursive font in the Mac for signatures without having to keep two sets of files?  I cannot find a solution or anyone who resolved this problem.  Please help, thanks!

    If I'm not mistaken, that fontmap.txt file is for use with fonts that are NOT embedded in the Director cast.  Also, there is something in the text file itself that explains how if you want to change the font mapping associated with a Director movie that has already been created (i.e. before you edited the fontmap file), then you have to "Load" that new fontmap in the movie properties (in the property inspector).  But let's forget about that fontmap file for now.  You're supposed to be able to embed a font into the Director cast, and then use that embedded font on either platform.  I've seen people complaining about this feature in the lastest version(s) of Director, and in fact I too have had trouble sometimes getting Director to realize that a font is embedded, but this seems to be in Author mode.  Once you do convince the program that the font is really embedded, and get it to use that embedded font, and create your projectors, the font seems to keep working OK in the projector.  Here's an extremley simple example I made with "Lucida Handwriting" embedded in the cast, and one text member that uses that font in the middle of the stage.  The font appeared correctly for me in both the PC exe and the Mac app created from this movie (both created on the Mac):
    http://www.funnybusinessstudio.com/director/fonttest.zip

  • Hand cursor problem with safari Mac os

    Hi,
    I have use movieclip objec in flex , set properties i.e mouseChildren=false, buttonMode=true for ButtonMode and Handcursor , Its work fine in Windows Os with IE,Opera,Safari,Chrome,Mozilla But Issue with Mac-OS wtih safari browser , Handcusor is not visbile on Movieclip instance.
    Any idea how to fix this ?
    Thanks In Advanced.
    a

    I am also having the same problem with movieclip objects made in Flash with buttonMode set to true and useHandCursor = true; The same files show the hand cursor on older versions of Safari. Does anyone know any workarounds?
    Here is a link to the project I noticed it on. The "Play","Cover", "Tracks" buttons, etc. should show the hand cursor:
    http://www.charleslehnert.com/the_slip_new

  • Strange font problem in Safari, only in one account

    Hi,
    Safari (3.2.1) renders small fonts on some pages incorrectly, but does so only on one user account. On nytimes.com, for example, the headlines are all fine, but the text is thin and hard to read.
    I have cleared caches, deleted User/Library/Preferences/com.apple.safari.plist, used Onyx to clear out various User caches, and checked to make sure I don't have Helvetica Fractions or Times Phonetic in my Font Book (these had mentioned as problems in various posts). In my own account, Firefox 3 renders those same texts correctly. So the problem seems to be isolated to Safari on one account. I would be grateful to hear if you can suggest a remedy.
    Best,
    Michel

    Hi Michel,
    Might be a problem with a local font, or settings within Safari's preferences.
    Within Safari, make sure your preference settings are correct.
    In the Appearance panel, default encoding is "Western (ISO 1), Standard and Fixed Width Fonts - I set mine to Skia. I believe the default font is Times. Either works fine.
    In the Advance panel, make sure the Style Sheet is set to "none".
    Outside of Safari, open Font Book from your Applications Folder. Highlight All Fonts, then scan the list. If you see any blue dots, that indicates a duplicate in your Font collection. You can remove the duplicates as follows: single-click on the first font listed, then Command/A keys to select "all". Then, go to the edit menu and select "resolve duplicates".
    Also, with everything still selected, in the File Menu, select "Validate Fonts". If errors appear, correct them by removing the corrupted font. Lastly, download a copy of Font Nuke. This will allow you to clean the Font cache.
    Post back

  • Font problems in Safari 5.1 (Lion)

    I am seeing the type replaced with an "A" inside a box on multiple websites.
    I've rebooted my system and still seeing the same error.
    Any help would be appreciated. Thanks!
    http://futurejosh.com/downloads/screen1.png
    http://futurejosh.com/downloads/screen2.png

    I got a bit anxious about the number of fonts activated on my system so I backed them up and then removed all user installed fonts and deleted my FontExplorerX 2.x and all files associated with it.
    I was still having the problem and was unable to empty my trash because of a weird version of Helvetica Neue that was "still in use". I restarted, removed the version of Helvetica Neue and Safari now works fine.
    Sorry... I wish I would have screenshot the file name of that version of Helvetica Neue.
    I still have the a version of Helvetica Neue that comes with the OS installed and it's activated in Font Book.
    This is definitely a bug and Apple will address it in future updates. My advice for those of you who want Safari to work now is to just clean out your fonts (back them up)...and start over.
    Hope this helps!

  • Upgraded to Snow Leopard, font problems in Safari

    When I open a few webpages, and the normal Times font displays like a distressed version, with extra splotches above certain letters, the "L" is elongated, "V" "S" & "N" all have accents over the lower-case letters. I check the preferences in Safari, and the default settings are in place -- default encoding Western ISO Latin 1.
    I checked the same web pages on my other Mac that I upgraded at the same time (same disks, a Mac Family pack), and they display correctly.
    Obviously some setting on my first Mac is different. Any suggestions about where to look first?
    Thanks,

    Could just be corrupt font cache files.
    Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.

  • Font problems in safari

    Since installing Lion some of the webpages are showing "A's" all over the page
    instead on normal text. Any ideas?
    Checked fontbook and suitcase, can't find the source problem.

    u need to disable or uninstall or upgrade whatever 3rd party application for fonts that you have running... perhaps fontexplorer?

  • Problems with ttf-mac-fonts package from AUR

    Hello,
    I've problems with generate package ttf-mac-fonts:
    $ sudo yaourt -S aur/ttf-mac-fonts
    A Macbuntu-10.04
    A Macbuntu-10.04/install.sh
    A Macbuntu-10.04/panel
    A Macbuntu-10.04/panel/panel.entries
    A Macbuntu-10.04/upgrade.sh
    A Macbuntu-10.04/compiz
    A Macbuntu-10.04/compiz/x64
    A Macbuntu-10.04/compiz/x64/original
    A Macbuntu-10.04/compiz/x64/original/libanimation.la
    A Macbuntu-10.04/compiz/x64/original/libanimation.a
    A Macbuntu-10.04/compiz/x64/original/libanimation.so
    A Macbuntu-10.04/compiz/x64/original/animation.xml
    A Macbuntu-10.04/compiz/x64/libanimation.a
    A Macbuntu-10.04/compiz/x64/libanimation.so
    A Macbuntu-10.04/compiz/x64/animation.xml
    A Macbuntu-10.04/compiz/x32
    A Macbuntu-10.04/compiz/x32/original
    A Macbuntu-10.04/compiz/x32/original/libanimation.la
    A Macbuntu-10.04/compiz/x32/original/libanimation.a
    A Macbuntu-10.04/compiz/x32/original/libanimation.so
    A Macbuntu-10.04/compiz/x32/original/animation.xml
    A Macbuntu-10.04/compiz/x32/libanimation.a
    A Macbuntu-10.04/compiz/x32/libanimation.so
    A Macbuntu-10.04/compiz/x32/animation.xml
    A Macbuntu-10.04/uninstall.sh
    A Macbuntu-10.04/readme
    Checked out revision 134.
    install: cannot stat 'gbk/*.ttf': No such file or directory
    ==> ERROR: A failure occurred in package().
    Aborting...
    ==> ERROR: Makepkg was unable to build ttf-mac-fonts.
    ==> Restart building ttf-mac-fonts ? [y/N]
    ==> --------------------------------------
    ==>
    How can I solve this problem?.
    Regards.

    Crap - sorry, I typed too quick, the upstream source if fine.  But as that PKGBUILD does some odd things, I missed the problem.   The simplest (but far from best) fix is to change the lines in the package function to the following:
    svn co https://macbuntu.svn.sourceforge.net/svnroot/macbuntu/Macbuntu/fonts/ ./
    install -d $pkgdir/usr/share/fonts/{TTF,Type1}
    install -m644 ./Macbuntu/fonts/gbk/*.ttf $pkgdir/usr/share/fonts/TTF
    install -m644 ./Macbuntu/fonts/mac/*.ttf $pkgdir/usr/share/fonts/TTF
    install -m644 ./Macbuntu/fonts/mac/*.pfb $pkgdir/usr/share/fonts/Type1
    That is, add the proper paths to the install commands.
    EDIT: or here is one that is at least a lot closer to the right way - though it's the first svn PKGBUILD I've worked on:
    _svn=ttf-mac-fonts
    pkgname=${_svn}-svn
    pkgver=134
    pkgrel=1
    pkgdesc="Mac fonts including Lucida Grande, Apple Garamond and other fonts from Apple"
    arch=('any')
    url="http://www.apple.com/safari/"
    license=('custom')
    depends=()
    makedepends=('subversion')
    conflicts=('macfonts' 'ttf-mac-fonts-svn')
    source=(
    "${_svn}::svn+http://svn.code.sf.net/p/macbuntu/code/Macbuntu/fonts"
    "http://images.apple.com/legal/sla/docs/SafariWindows.pdf"
    sha256sums=(
    'SKIP'
    'd1c9697ea430a3ddad6548c7b9c961c4b06f9da5a5ba1f1007fe998b3354df4a'
    install='ttf-mac-fonts.install'
    pkgver() {
    cd ${srcdir}/${_svn}
    svnversion | tr -d [A-z]
    package() {
    cd ${srcdir}
    install -d $pkgdir/usr/share/licenses/${_svn}
    install -m644 SafariWindows.pdf $pkgdir/usr/share/licenses/${_svn}/
    cd ${srcdir}/${_svn}
    install -d $pkgdir/usr/share/fonts/{TTF,Type1}
    install -m644 gbk/*.ttf $pkgdir/usr/share/fonts/TTF
    install -m644 mac/*.ttf $pkgdir/usr/share/fonts/TTF
    install -m644 mac/*.pfb $pkgdir/usr/share/fonts/Type1
    Last edited by Trilby (2013-08-21 13:35:55)

  • My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

    My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
    Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
    Skip

    I am having lot's of lag time with Safari, etc..
    I'll type in a website.. and it will take 15-20 seconds to start..
    Start time: 17:51:37 12/02/14
    Model Identifier: MacBookPro11,3
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 14 days 3:02
    USB
       My Passport 07B8 (Western Digital Technologies, Inc.)
    Diagnostic reports
       2014-11-13 QuickLookSatellite crash x2
       2014-11-21 com.apple.WebKit.Plugin.64 crash
    Log
       Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
       Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
       Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
       Dec  1 09:09:03 [[0xffffff802bfa4000]  OpCode 0x0C01 (Set Event Mask) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
       Dec  1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
       Dec  1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
       Dec  1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
       Dec  1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
       Dec  1 10:31:08 ALF: ifnet_get_address_list_family error 12
       Dec  1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
       Dec  1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
       Dec  1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
       Dec  1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
       Dec  1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
       Dec  1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
       Dec  1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
       Dec  1 20:08:30 jnl: disk3s2: journal replay done.
       Dec  1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
       Dec  2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
       Dec  2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
       Dec  2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
    Swap (MiB): 41556
    Activity
       Net: 210 in, 20 out (KiB/s)
    Memory: kernel_task (UID 0) is using 1632 MB
    kexts
       com.cisco.kext.acsock (1.1.0)
       com.wdc.driver.USB.64.10.9 (1.0.1)
    Daemons
       com.cisco.anyconnect.vpnagentd
       com.oracle.java.JavaUpdateHelper
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.google.keystone.daemon
       com.wdc.WDSmartWareService
       com.oracle.java.Helper-Tool
       com.adobe.fpsaud
       com.wdc.SmartwareDriveService
    Agents
       com.adobe.AdobeCreativeCloud
       com.zimbra.desktop
       com.citrix.ServiceRecords
       com.google.keystone.system.agent
       com.apple.photostream-agent
       com.genieo.completer.download
       com.genieo.completer.update
       com.cisco.anyconnect.gui
       com.citrix.ReceiverHelper
       com.citrix.AuthManager_Mac
       com.citrix.FMDAgent.14800.UUID
       com.oracle.java.Java-Updater
       com.fiplab.MailTabProHelper
       com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
       com.citrixonline.GoToMeeting.G2MUpdate
       com.apple.AirPortBaseStationAgent
       com.microsoft.SyncServicesAgent
    Startup items
       /System/Library/StartupItems/ciscod/ciscod
       /System/Library/StartupItems/ciscod/StartupParameters.plist
    Bundles
       /System/Library/Extensions/hp_fax_io.kext
       - com.hp.kext.hp-fax-io
       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
       - com.hp.print.hpio.Inkjet1.kext
       /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
       - com.hp.print.hpio.Inkjet4.kext
       /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
       - com.hp.print.hpio.inkjet8.kext
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/WD1394_64_109HPDriver.kext
       - com.wdc.driver.1394.64.10.9
       /System/Library/Extensions/WDUSB_64_109HPDriver.kext
       - com.wdc.driver.USB.64.10.9
       /Library/Extensions/hp_io_printerclassdriver_enabler.kext
       - com.hp.hpio.hp-io-printerclassdriver-enabler
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
       - com.citrix.citrixicaclientplugIn
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
       - com.google.googletalkbrowserplugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/npg.plugin
       - npg.graphon.com
       /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
       - com.google.o1dbrowserplugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/Internet Plug-Ins/SlingPlayer.plugin
       - com.slingmedia.slingplayer.plugin.nspapi
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/FMDSysPrefPane.prefPane
       - Citrix.FMDSysPrefPane
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
       - com.westerndigital.quickview.prefpanel
       /Library/PreferencePanes/Zimbra.prefPane
       - com.zimbra.prefpanel
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Internet Plug-Ins/WebEx.plugin
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx64.plugin
       - com.cisco_webex.plugin.gpc64
    dylibs
       /usr/lib/libaudioc.dylib
       /usr/lib/libclipc.dylib
       /usr/lib/libcs.dylib
       /usr/lib/libdc.dylib
       /usr/lib/libfilec.dylib
       /usr/lib/libMonoPosixHelper.dylib
       /usr/lib/libpbr.dylib
       /usr/lib/libprintc.dylib
       /usr/lib/libsc.dylib
       /usr/lib/libSFFileMonitor.32.dylib
       /usr/lib/libSFIPC.32.dylib
       /usr/lib/libSFIPC.I.dylib
       /usr/lib/libSFsqlite3.7.4.dylib
       /usr/lib/libSFSyncEngine.I.dylib
       /usr/lib/libupc.dylib
    App extensions
       it.bloop.airmail.beta10.Airmail-Today-Beta
       it.bloop.airmail.beta10.Airmail-Composer-Beta
       com.wunderkinder.wunderlistdesktop.sharingextension
       com.wunderkinder.wunderlistdesktop.todayextension
       com.readitlater.PocketMac.AddToPocketShareExtension
       com.stylemac.instadesk.Photodesk-Feed
       it.bloop.airmail.beta10.Airmail-Share-Beta
    Apps
       /Applications/Uninstall IM Completer.app
    Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/opt/cisco/anyconnect/gui_keepalive</key>
        <true/>
        </dict>
        </dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.gui</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>open</string>
        <string>--wait-apps</string>
        <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
       ...and 8 more line(s)
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>9</integer>
        <key>Minute</key>
        <integer>57</integer>
        <key>Weekday</key>
        <integer>3</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
       http://www.apple.com/DTDs/PropertyList-1.0.dtd >
       <plist version="1.0">
       <dict>
            <key>Label</key>
            <string>com.cisco.anyconnect.vpnagentd</string>
            <key>ProgramArguments</key>
            <array>
                 <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
                 <string>-execv_instance</string>
            </array>
            <key>KeepAlive</key>
            <true/>
            <key>RunAtLoad</key>
            <true/>
            <key>AbandonProcessGroup</key>
            <true/>
            <key>EnableTransactions</key>
            <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.SmartwareDriveService</string>
        <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.WDSmartWareService</string>
       <!-- <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.download</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>download</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Downloads</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.update</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>update</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>StartInterval</key>
        <integer>86400</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.microsoft.SyncServicesAgent</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
               <key>Label</key>
               <string>com.zimbra.desktop</string>
               <key>ProgramArguments</key>
               <array>
                       <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                       <string>start</string>
                       <string>-w</string>
               </array>
       

Maybe you are looking for

  • Best way to have resizeable LUNS for datafiles - non RAC system

    All, (thanks Avi for the help so far, I know its a holiday there so I wait for your return and see if any other users can chip in also) one of our systems (many on the go here) is being provided by an external vendor - I am reviewing their design and

  • How do I to modify context value DATABASE.SID on existing web ADI sheet?

    Does anybody know how to modify the connection context value (DATABASE.SID) on an existing web ADI sheet? My original sheet was created against e.g. TESTBASE.TST1, but now I want the same sheet to work on PRD (PRDBASE.PRD). In the old client version

  • Using SYPART01 IDOC for setting partner profiles from external system

    We wish to maintain our partner profiles from an external system. Is there any existing interface for doing this. It seems that the sypart message is only for output, not input. Any ideas or suggestions? Thanks! Dan

  • Basic behavior question

    I created a slice and a simple behavior that onrollover to add a pop-up menu. How do you next add another behavior that indicates onroll off to make the menu disappear? Thanks.

  • [Polish] Typo in contact lists context menu

    Hi there, I've recently found a bad looking typo in context menu, when you're in a main list view. To reproduce: 1. Go to main view. 2. Select multiple contacts at once (using the CTRL key). 3. Press right mouse button. 4. Check a translation string