Rutine error in PPOMA_CRM ( CREATE_OBJECT_CLASS_NOT_FOUND )

Hello,
I am working with transaction ppoma_crm and the system shows the folowing message in the screen "Rutine error CREATE_OBJECT_CLASS_NOT_FOUND has ocurred", when I try to create a new object..
Can anyone tell me what happened and what can I do to solve the problem?

<b>More information:</b>
Runtime error CREATE_OBJECT_CLASS_NOT_FOUND has occurred
Message no. 00341
Diagnosis
Error texts from the batch input are not output
Only a placeholder
Appl. area        00
Message number    341
Package             SDYN
Last changed by     SAP
Changed on          29.09.1994   Last changed at 16:03:50
Original lang.      DE German
Person respons.     SAP
Short text          General Basis texts

Similar Messages

Error when assigning a BP in ppoma_crm

Hi all-
When I try to assign a Business Partner, rather than a user, to a position in the org model in ppoma_crm, I recieve this error message:
Message no. 5A719 - Caution: system could not perform all data changes
Has anyone worked through this message?
Thanks,
Nathan

Hi Raguraman
Even I have the same problem the long text is as follows
Caution: system could not perform all data changes
Message no. 5A719
Diagnosis
The required data changes consist of two parts:
1. Scheduling existing relationships
2. Creating a new relatonship
The existing releationship(s) was/were successfully scheduled, but the system could not create the new relationship.
Procedure
You can take back the data changes you made, using the undo function.
Regards
Charan

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

Runtime Error: CREATE_OBJECT_CLASS_NOT_FOUND

Dear Friends,
My system is worked fine. But after Kernel Upgradation. I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Error CREATE_OBJECT_CLASS_NOT_FOUND
Exception CX_SY_CREATE_OBJECT_ERROR
CREATE OBJECT: Class "\CLASS=CL_IM_FI_PAYREF_BADI_010" could not be found.
What happened?
Error in ABAP application program.
The current ABAP program "CL_EXIT_MASTER================CP"
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CREATE_OBJECT_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"INSTANTIATE_IMP_CLASS" "(METHOD)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The class entered dynamically at CREATE OBJECT
("\CLASS=CL_IM_FI_PAYREF_BADI_010") cannot be found,
neither locally. nor as a global class in the system.
Can somebody Please tell me the solution of this error.
Thanks and Rrgards,
Rahul Asthana

Hello Friend,
Thanks for your Answer.
Friend i have tried it, but still i am facing same problem.
Thanks and Regards,
Rahul Asthana.
Edited by: Arun Kamath on Feb 22, 2012 3:27 PM

Ppoma_crm Error in Sales Org.

Hi Friends,
I have CRM 4.0 server and R/3 4.7 server , I got a error message at using PPOMA_CRM for selecting R/3 sales org in CRM server.
The message is "Error during RFC connection to OLPT system" , If using the same in next time , I got the message "No entry found".
Already got the RFC connection CRM to R/3 as well as R/3 to CRM. Please give the solution for this problem.
Thanks & Regards,
Marichamy.A

Hello
I know it is a long time ago since this question was posted on the SDN but I have a similar problem.
I had the same problem in ppOma_crm with that RFC Connection on my development system. After executing CRMC_R3_ORG_GENERATE I saw that there is a wrong RFC connection set. It is pointing to my production system (I made systemrefresh (systemcopy producte to dev system)) a couple of weeks ago.
Do you know where I can change the RFC destination connection of CRMC_R3_ORG_GENERATE respectively PPOMA_CRM?
Thanks in advance and Regards
Marco

CREATE_OBJECT_CLASS_NOT_FOUND runtime error during extractor checking

Hi Gurus,
I had to modify a generic data source based on a database view. I had to add a field for extraction. Since this field was available in the tables on which the view was built but not used in the view, I modified the view to to include the field. Then, I modified the extract structure to include the newly added field.
Now, when I try to check the extractor in RSA3 (extract checker), I end up getting a runtime error with details as below.
Runtime Errors                    CREATE_OBJECT_CLASS_NOT_FOUND
Except.                    CX_SY_CREATE_OBJECT_ERROR
Date and Time                    3/6/2012     5:46:07
     Short text
          CREATE OBJECT: The class "\CLASS=ZCL_IM_CLC" was not found.
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "CL_EXIT_MASTER================CP" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          An exception occurred that is explained in detail below.
          The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not
           caught in
          procedure "INSTANTIATE_IMP_CLASS" "(METHOD)", nor was it propagated by a
           RAISING clause.
          Since the caller of the procedure could not have anticipated that the
          exception would occur, the current program is terminated.
          The reason for the exception is:
          The dynamically specified class "\CLASS=ZCL_IM_CLC" at CREATE OBJECT neither
           exists as
          local, nor as global class in the system, or is overshadowed by a local
          data type of the same name.
     Missing RAISING Clause in Interface
          Program                    CL_EXIT_MASTER================CP
          Include                    CL_EXIT_MASTER================CM002
          Row                    1
          Module type                    (METHOD)
          Module Name                    INSTANTIATE_IMP_CLASS
     Trigger Location of Exception
          Program                    CL_EXIT_MASTER================CP
          Include                    CL_EXIT_MASTER================CM002
          Row                    15
          Module type                    (METHOD)
          Module Name                    INSTANTIATE_IMP_CLASS
     Source Code Extract
     Line          SourceCde
     1          METHOD instantiate_imp_class .
     2
     3            DATA: abs_type_classname TYPE string,
     4                  imp_obj            TYPE imp_obj_type.
     5
     6          *   Look for objects that have been created for this class
     7            READ TABLE imp_obj_tab INTO imp_obj
     8                WITH TABLE KEY imp_name    = imp_name
     9                               calling_obj = caller.
     10            IF sy-subrc = 0.
     11              instance = imp_obj-obj.
     12            ELSE.
     13              CONCATENATE '\CLASS=' imp_class INTO abs_type_classname.
     14          ***** dynamic object creation     *******************************
     >>>>>              CREATE OBJECT instance TYPE (abs_type_classname).
     16          ******************************************************************
     17              imp_obj-imp_name    = imp_name.
     18              imp_obj-calling_obj = caller.
     19              imp_obj-obj         = instance.
     20              INSERT imp_obj INTO TABLE imp_obj_tab.
     21            ENDIF.
     22          ENDMETHOD.
Can anybody please help me solve this issue?

Hi Ajay,
Please check the following threads for your issue::
System Exception
Exception              CX_SY_CREATE_OBJECT_ERROR
Why is CREATE_OBJECT_CLASS_NOT_FOUND ?
Dump CREATE_OBJECT_CLASS_NOT_FOUND with BADI in MM_MATBEL archiving object
Regards,
Arpit

Error while Activating ODS 0FIGL_O02

Dear All.
i load the data from R/3 into my ODS 0FIGL_O02 it loads succesfull in PSA and then into ODS with green light, but when i try to activate the request it gives me following error.
Value 'As Per Nabeel' (hex. '41007300200050006500720020004E0061006200650065006C') of characteristic 0DOC_HD_TXT contains invalid cha.
Now where is the invalid character in the value, on top of that i am not able to find that record by search in Document Header Field in New Data Table and also in PSA i am trying like this.
in Document Header Text i provide the value As Per Nabeel, and also Nabeel but not able to found the record so i can see what is the problem.
what i can see the error log is the Data Package number is there any way to found the detail for this record.
How to found this record in PSA or in New Data table as per the value specified.
in RSKC i have given the following value ALL_CAPITAL_PLUS_HEX.
Please guide me to resolve the following issue.
thanks and best regards,

Hello,
It is better to use rutine to aviod invalid characters: just replace YOUR_FIELD
DATA: l_user_allowed_char TYPE rsallowedchar,
l_all_allowed_char(140) TYPE c,
l_result_str_len TYPE i,
l_str_increment TYPE i.
CONSTANTS c_sap_allowed_char(58) TYPE c VALUE
' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
IF l_all_allowed_char IS INITIAL.
    SELECT SINGLE * FROM rsallowedchar
    INTO l_user_allowed_char
    WHERE allowkey = 'S'.
    CONCATENATE c_sap_allowed_char
    l_user_allowed_char-allowchar
    INTO l_all_allowed_char.
ENDIF.
RESULT = TRAN_STRUCTURE-YOUR_FIELD.
TRANSLATE RESULT TO UPPER CASE.
l_result_str_len = STRLEN( RESULT ).
l_str_increment = 0.
WHILE l_str_increment <> l_result_str_len.
    IF NOT RESULT+l_str_increment(1) CO l_all_allowed_char.
      RESULT+l_str_increment(1) = ' '.
    ENDIF.
    ADD 1 TO l_str_increment.
ENDWHILE.
BR
Ondrej

Error when creating spatial index in 10g

Hello.
I have a problen when I try to create a spatial index. The strange thing is that the same commands always works fine in some machines, but if always fails in others. I tryed in diferent versiones of Oracle, but I have the error in al of them. The versions I have tryed are:
- 10.2.0.1
- 10.2.0.4
The operating systems are:
Windows XP professional 32 bits
Windows 2003 Server 32 bits
These are the steps i make:
1) Create a Table with a SDO_GEOMETRY column (GEOMETRY)
2) Load data with SQLLDR (I hve tryed different SRID's, and all fail)
So far everything is ok
3) Create the INDEX
When I execute the CREATE INDEX command CREATE INDEX MADRID_SX ON MADRID (GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
I obtain the error:
ERROR en linea 1:+
ORA-29855: se ha producido un error en la ejecucion de la rutina+
ODCIINDEXCREATE+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_INDEX_METHOD_10I", line 10+
I too have noticed that if I execute the next command, I have an error:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:+
ORA-13282: fallo al inicializar la transformacion de coordenadas+
ORA-06512: en "MDSYS.SDO_CS", linea 75+
ORA-06512: en "MDSYS.SDO_CS", linea 112+
ORA-06512: en "MDSYS.SDO_CS", linea 2678+
And if I execute the next command, I too have another error:
SELECT SDO_CS.VALIDATE_WKT(25830) FROM DUAL;
FALSE (169)*
Any ideas? Could it be related with something inside the machines, user privileges, etc.?
Thanks in advance.

I have found that the problem is to use a SRID of AUTH_NAME column in MDSYS.CS_SRS table without the value "Oracle." in it.
If I use an Oracle’s SRID, everything works fine. If I use an EPSG’s SRID, fails.
For example, this command uses an Oracle SRID (8192) and one from the EPSG (25830), and fails:
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),25830) from dual;
ERROR en linea 1:
ORA-13282: fallo al inicializar la transformacion de coordenadas
ORA-06512: en "MDSYS.SDO_CS", linea 79
ORA-06512: en "MDSYS.SDO_CS", linea 116
ORA-06512: en "MDSYS.SDO_CS", linea 2690
However, if I use two Oracle SRID (8192 and 83030), it works.
SELECT MDSYS.sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),83030) from dual;
SDO_GEOMETRY(2001, 83030, SDO_POINT_TYPE(1625183.71, 5936269.06, NULL), NULL, NULL
Therefore, the problem seems to be to use a non Oracle SRID.

Error message while creating Sales transaction

Hi Gurus
While creating a sales transaction in Mobile Sales I am getting the following error message.
No Valid sales channel exists for this business partner enters a sales channel in the business partner sales area data.
I have checked in table SMO_KNVV, there is an entry for this business partner. What can be the possible reason? Please help.
Regards
Javed

Hi Javed,
Your logged employee should also have some sales area assigned to him/her.
This can be done by assigning you employee to sales position under sales area in CRM Org Management (PPOMA_CRM).
Once this is done and org. data is replicated to Mobile. you can very much create the transactions without error.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

ERROR creating spatial index

Hi all.
I have a problem during the creation of a spatial index for a table column.
The metadata is in the USER_SDO_GEOM_METADATA VIEW, but Oracle throws the message:
ORA-29855: se ha producido un error en la ejecución de la rutina ODCIINDEXCREATE
ORA-13203: fallo al leer la vista USER_SDO_GEOM_METADATA
ORA-13203: fallo al leer la vista USER_SDO_GEOM_METADATA
ORA-06512: en "MDSYS.SDO_INDEX_METHOD_10I", línea 10
The code that i use to create the index is:
DELETE FROM USER_SDO_GEOM_METADATA;
INSERT INTO USER_SDO_GEOM_METADATA
VALUES (
'E011_CIUDADES',
'F011_GEO',
MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('Longitud', -180, 180, 10), -- 10 meters tolerance
MDSYS.SDO_DIM_ELEMENT('Latitud', -90, 90, 10) -- 10 meters tolerance
8307 -- SRID for 'Longitude / Latitude (WGS 84)' coordinate system
CREATE INDEX IX_SPATIAL_011_GEO
ON SYSTEM.E011_CIUDADES(F011_GEO)
INDEXTYPE IS MDSYS.SPATIAL_INDEX
PARAMETERS ('tablespace=ASOUSU');
I will apreciate any help. Thanks.

This is very bad:
CREATE INDEX IX_SPATIAL_011_GEO ON SYSTEM.E011_CIUDADES(F011_GEO)
INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('tablespace=ASOUSU');It means you've stored spatial data in the SYSTEM user's schema, which, as noted, is mucho malo. Either that, or it is a typo and that is why you got: fallo al leer la vista USER_SDO_GEOM_METADATA

Error in ABAP Proxy

Hi ,
I am getting an error in the proxy , it was working fine but today only it is throughing the following error :
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>CREATE_OBJECT_CLASS_NOT_FOUND</SAP:P1>
<SAP:P2>ZZCL_MIIA_UKEUROPE_TLOG</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing</SAP:Stack>
Please let me know the reason of this .
Thanks in anticipation
Anita

Hi,
I am assuming you have a server proxy (Inbound interface).
Your proxy objects have not been created properly.
To check this, send a message to XI.
Either XI itself will throw an error message, or running SXI_MONITOR in receiving SAP application will show you the error . If you do not see any entry for corresponding interface, then proxy objects have not been created properly.
Regards,
Puloma.

Handling unexpected errors/situations in an ABAP program

Hi,
if i come across a situation where i need to handle a runtime error unexpectedly what should be my approach.
for eg. if i build a dynamic select statement and if my logic goes wrong the program flow should proceed normally as if nothing has happened 'with out giving me a short dump' . what if im not sure about the type of error thats going to show up, is there any way?
your help will be appreciated.
Regards,
ravi.

Hi Ravi
Not all exceptions can be overridden. FYI, Below are a list of exceptions that can be handled:
Alphabetical Overview of Catchable Runtime Errors
Below you find an alphabetical list of all catchable runtime errors. For each runtime error, the predefined exception class assigned is specified which is used to handle the respective runtime error as of Release 6.10. If an exception class is assigned to more than one catchable runtime error, it may contain as many message texts as required which you can find in the Class Builder on the Texts tab.
Almost all of the runtime errors listed here are combined together in exception groups. These exception groups are also assigned those ABAP keywords at which the runtime errors contained can be caught.
ADDF_INT_OVERFLOW
Overflow at addition, type I ( ADD ... UNTIL / ADD ... FROM ... TO)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
ASSIGN_CASTING_ILLEGAL_CAST
The components of the source field type and the target type which are strings, tables, or references do not have exactly the same offset and type.
Exception class: CX_SY_ASSIGN_CAST_ILLEGAL_CAST
ASSIGN_CASTING_UNKNOWN_TYPE
The type specified at runtime is unknown.
Exception class: CX_SY_ASSIGN_CAST_UNKNOWN_TYPE
ASSIGN_FIELD_NOT_IN_RANGE
The field is not within the RANGE specified.
Exception class: CX_SY_ASSIGN_OUT_OF_RANGE
BCD_FIELD_OVERFLOW
Overflow at conversion / arithmetic operation (type P, with specified length)
Exception class: CX_SY_CONVERSION_OVERFLOW
BCD_OVERFLOW
Overflow at conversion / arithmetic operation (type P)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
BCD_ZERODIVIDE
Division by 0 (type P)
Exception class: CX_SY_ZERODIVIDE
COMPUTE_ACOS_DOMAIN
Invalid call of the mathematical function ACOS
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_ASIN_DOMAIN
Invalid call of the mathematical function ASIN
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_ATAN_DOMAIN
Invalid call of the mathematical function ATAN
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_BCD_OVERFLOW
Overflow at arithmetic operation (all operands of type P)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_COSH_DOMAIN
Invalid call of the mathematical function COSH
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_COSH_OVERFLOW
Overflow at mathematical function COSH
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_COS_DOMAIN
Invalid call of the mathematical function COS
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_COS_LOSS
Inaccurate result of function COS
Exception class: CX_SY_PRECISION_LOSS
COMPUTE_EXP_DOMAIN
Invalid call of the mathematical function EXP
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_EXP_RANGE
Overflow or underflow at mathematical function EXP
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_DIV_OVERFLOW
Overflow at division (type F)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_MINUS_OVERFLOW
Overflow at subtraction (type F)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_PLUS_OVERFLOW
Overflow at addition (type F)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_TIMES_OVERFLOW
Overflow at multiplication (type F)
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_FLOAT_ZERODIVIDE
Division by 0 (type F)
Exception class: CX_SY_ZERODIVIDE
COMPUTE_INT_ABS_OVERFLOW
Integer overflow while calculating the absolute value
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_DIV_OVERFLOW
Integer overflow at division
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_MINUS_OVERFLOW
Integer overflow at subtraction
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_PLUS_OVERFLOW
Integer overflow at addition
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_TIMES_OVERFLOW
Integer overflow at multiplication
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_INT_ZERODIVIDE
Division by 0 (type I)
Exception class: CX_SY_ZERODIVIDE
COMPUTE_LOG10_ERROR
Invalid call of the mathematical function LOG10
Exception classes: CX_SY_ARITHMETIC_OVERFLOW, CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_LOG_ERROR
Invalid call of the mathematical function LOG
Exception classes: CX_SY_ARITHMETIC_OVERFLOW, CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_MATH_DOMAIN
Invalid call of a mathematical function
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_MATH_ERROR
Error performing a mathematical function
Exception class: None since this runtime error can no longer be caught
COMPUTE_MATH_LOSS
Inaccurate result of a mathematical function
Exception class: CX_SY_PRECISION_LOSS
COMPUTE_MATH_OVERFLOW
Overflow at a mathematical function
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_MATH_UNDERFLOW
Underflow at a mathematical function
Exception class: None since exception no longer occurs
COMPUTE_POW_DOMAIN
Invalid argument when using powers
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_POW_RANGE
Overflow or underflow when using powers
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_SINH_DOMAIN
Invalid call of the mathematical function SINH
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_SINH_OVERFLOW
Overflow at mathematical function SINH
Exception class: CX_SY_ARITHMETIC_OVERFLOW
COMPUTE_SIN_DOMAIN
Invalid call of the mathematical function SIN
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_SIN_LOSS
Inaccurate result of the function SIN
Exception class: CX_SY_PRECISION_LOSS
COMPUTE_SQRT_DOMAIN
Invalid call of the mathematical function SQRT
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_TANH_DOMAIN
Invalid call of the mathematical function TANH
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_TAN_DOMAIN
Invalid call of the mathematical function TAN
Exception class: CX_SY_ARG_OUT_OF_DOMAIN
COMPUTE_TAN_LOSS
Inaccurate result of the function TAN
Exception class: CX_SY_PRECISION_LOSS
CONNE_IMPORT_WRONG_COMP_DECS
Import error; a component of a structured type in the dataset has wrong decimal places
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_COMP_LENG
Import error; a component of a structured type in the dataset has the wrong length
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_COMP_TYPE
Import error; a component of a structured type in the dataset has the wrong type
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_DECS
Import error; a field in the dataset has wrong decimal places
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_LENG
Import error; a field in the dataset has the wrong length
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_FIELD_TYPE
Import error; a field in the dataset has the wrong type
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_OBJECT_TYPE
Import error; type conflict between simple and structured data types
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONNE_IMPORT_WRONG_STRUCTURE
Import error; type conflict between structured objects
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
CONVT_CODEPAGE
Character set conversion not possible for one or more characters
Exception class: CX_SY_CONVERSION_CODEPAGE
CONVT_CODEPAGE_INIT
Conversion of texts between code pages not supported
Exception class: CX_SY_CODEPAGE_CONVERTER_INIT
CONVT_NO_NUMBER
Value to be converted cannot be interpreted as a number
Exception class: CX_SY_CONVERSION_NO_NUMBER
CONVT_OVERFLOW
Overflow at conversion (all types, not type P)
Exception class: CX_SY_CONVERSION_OVERFLOW
CREATE_DATA_ILLEGAL_DECIMALS
Invalid value for the addition DECIMALS
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_DATA_ILLEGAL_INIT_SIZE
Invalid value for the addition INITIAL SIZE
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_DATA_ILLEGAL_LENGTH
Invalid value for the addition LENGTH
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_DATA_LEN_NOT_ALLOWED
The addition LENGTH was used for a type other than C, N, X, or P
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_DATA_NOT_ALLOWED_TYPE
The type specified dynamically in the addition TYPE is not typed completely.
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_DATA_UNKNOWN_TYPE
The type specified in the addition TYPE is unknown.
Exception class: CX_SY_CREATE_DATA_ERROR
CREATE_OBJECT_CLASS_ABSTRACT
You attempted to instantiate an abstract class.
Exception class: CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CLASS_NOT_FOUND
The class specified in the dynamic CREATE OBJECT was not found.
Exception class: CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CREATE_PRIVATE
You attempted to create an object of a class defined as 'CREATE PRIVATE'.
Exception class: CX_SY_CREATE_OBJECT_ERROR
CREATE_OBJECT_CREATE_PROTECTED
You attempted to create an object of a class defined as 'CREATE PROTECTED'.
Exception class: CX_SY_CREATE_OBJECT_ERROR
DATA_LENGTH_NEGATIVE
Invalid subfield access: Length negative
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
DATA_LENGTH_0
Invalid subfield access: Length 0
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
DATA_LENGTH_TOO_LARGE
Invalid subfield access: Length too large
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
DATA_OFFSET_NEGATIVE
Invalid subfield access: Offset negative
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
DATA_OFFSET_LENGTH_TOO_LARGE
Invalid subfield access: Offset + length too large
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
DATA_OFFSET_LENGTH_NOT_ALLOWED
Invalid subfield access: Inadequate type
Exception class: CX_SY_OFFSET_NOT_ALLOWED
DATASET_CANT_CLOSE
File could not be closed; there might be no more space in the file system.
Exception class: CX_SY_FILE_CLOSE
DATASET_CANT_OPEN
File cannot be opened
Exception class: CX_SY_FILE_OPEN
DATASET_NO_PIPE
OPEN DATASET with the addition FILTER is not supported on the current operating system.
Exception class: CX_SY_PIPES_NOT_SUPPORTED
DATASET_NO_POSITION
Access to current read/write position of file not possible
Exception class: CX_SY_FILE_POSITION
DATASET_NOT_OPEN
File not open
Exception class: CX_SY_FILE_OPEN_MODE
DATASET_OFFSET_TO_LARGE
Offset specified exceeds the system limit
Exception class: CX_SY_FILE_POSITION
DATASET_PIPE_CLOSED
Pipe for file closed
Exception class: CX_SY_PIPE_REOPEN
DATASET_READ_ERROR
Error reading a file
Exception class: CX_SY_FILE_IO
DATASET_READ_ONLY
File opened in read-only mode
Exception class: CX_SY_FILE_OPEN_MODE
DATASET_SEEK_ERROR
Error positioning in a file
Exception class: CX_SY_FILE_POSITION
DATASET_TOO_MANY_FILES
Maximum number of open files exceeded
Exception class: CX_SY_TOO_MANY_FILES
DATASET_WRITE_ERROR
Error writing a file
Exception class: CX_SY_FILE_IO
DYN_CALL_METH_CLASSCONSTRUCTOR
You attempted to call the class constructor.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_CLASS_ABSTRACT
You attempted to call an abstract method.
Exception class: CX_SY_DYN_CALL_ILLEGAL_CLASS
DYN_CALL_METH_CLASS_NOT_FOUND
You attempted to call a method of a class that does not exist.
Exception class: CX_SY_DYN_CALL_ILLEGAL_CLASS
DYN_CALL_METH_CONSTRUCTOR
You attempted to call the instance constructor.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_EXCP_NOT_FOUND
You attempted to catch an unknown exception.
Exception class: CX_SY_DYN_CALL_EXCP_NOT_FOUND
DYN_CALL_METH_NOT_FOUND
You attempted to call an unknown method.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_NOT_IMPLEMENTED
You attempted to call a method not yet implemented.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_NO_CLASS_METHOD
You attempted to call an instance method through a class.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_PARAM_KIND
You attempted to pass a parameter with a wrong parameter type.
Exception class: CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_LITL_MOVE
You attempted to pass a constant actual parameter to a formal EXPORTING, CHANGING, or RETURNING parameter.
Exception class: CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_MISSING
A required parameter was not filled.
Exception class: CX_SY_DYN_CALL_PARAM_MISSING
DYN_CALL_METH_PARAM_NOT_FOUND
You attempted to pass an unknown parameter.
Exception class: CX_SY_DYN_CALL_PARAM_NOT_FOUND
DYN_CALL_METH_PARAM_TAB_TYPE
You attempted to pass a parameter with a wrong table type.
Exception class: CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARAM_TYPE
You attempted to pass a parameter with a wrong type.
Exception class: CX_SY_DYN_CALL_ILLEGAL_TYPE
DYN_CALL_METH_PARREF_INITIAL
An initial data reference was passed for a required parameter.
Exception class: CX_SY_DYN_CALL_PARAM_MISSING
DYN_CALL_METH_PRIVATE
You attempted to call a private method outside.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_PROTECTED
You attempted to call a protected method outside.
Exception class: CX_SY_DYN_CALL_ILLEGAL_METHOD
DYN_CALL_METH_REF_IS_INITIAL
You attempted to call a method to an initial reference.
Exception class: CX_SY_REF_IS_INITIAL
EXPORT_BUFFER_NO_MEMORY
The EXPORT data cluster is too large for the application buffer.
Exception class: CX_SY_EXPORT_BUFFER_NO_MEMORY
EXPORT_DATASET_CANNOT_OPEN
The IMPORT/EXPORT statement was unable to open the file.
Exception class: CX_SY_FILE_OPEN
EXPORT_DATASET_WRITE_ERROR
The Export statement could not write the file.
Exception class: CX_SY_FILE_IO
GENERATE_SUBPOOL_DIR_FULL
The system is unable to generate another temporary subroutine pool.
Exception class: CX_SY_GENERATE_SUBPOOL_FULL
IMPORT_ALIGNMENT_MISMATCH
Import error; identical sequence of components but with type conflict or with different integration into structured data types
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
IMPORT_TYPE_MISMATCH
Import error; only at IMPORT...FROM MEMORY | FROM SHARED BUFFER...
Exception class: None since this runtime error can not longer be caught
IMPORT_WRONG_END_POS
Import error; dataset has a different length.
Exception class: CX_SY_IMPORT_MISMATCH_ERROR
MOVE_CAST_ERROR
Type conflict assigning between object and/or interface references (only MOVE...?TO... or operator ?=)
Exception class: CX_SY_MOVE_CAST_ERROR
OPEN_DATASET_NO_AUTHORITY
No authorization to access a file
Exception class: CX_SY_FILE_AUTHORITY
OPEN_PIPE_NO_AUTHORITY
No authorization to access a file (OPEN DATASET...FILTER...)
Exception class: CX_SY_FILE_AUTHORITY
PERFORM_PROGRAM_NAME_TOO_LONG
Invalid program name in the PERFORM statement
Exception class: CX_SY_PROGRAM_NOT_FOUND
REFI_WRONG_SECTION
Wrong offset/length specification in the REPLACE statement
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
REPLACE_INFINITE_LOOP
SECTION of length 0 in the REPLACE statement
Exception class: CX_SY_REPLACE_INFINITE_LOOP
RMC_COMMUNICATION_FAILURE
Communication error during Remote Method Call
Exception class: CX_SY_RMC_COMM_FAILURE
RMC_INVALID_STATUS
State error during Remote Method Call
Exception class: CX_SY_RMC_INVALID_STATUS
RMC_SYSTEM_FAILURE
System error during Remote Method Call
Exception class: CX_SY_RMC_SYSTEM_FAILURE
STRING_LENGTH_NEGATIVE
Invalid access with negative length to a string
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
STRING_LENGTH_TOO_LARGE
Invalid access to a string (length too large)
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_NEGATIVE
Invalid access with negative offset to a string
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_TOO_LARGE
Invalid access to a string (offset too large)
Exception class: CX_SY_RANGE_OUT_OF_BOUNDS
STRING_OFFSET_LENGTH_TOO_LARGE
Invalid access to a string (offset + length too large)
Exception class: CX_SY_LOCALIZATION_ERROR
TEXTENV_CODEPAGE_NOT_ALLOWED
Character set not released in the system (SET LOCALE...)
TEXTENV_INVALID
Error setting the text environment (SET LOCALE...)
Exception class: CX_SY_LOCALIZATION_ERROR

Dump CREATE_OBJECT_CLASS_NOT_FOUND with BADI in MM_MATBEL archiving object

Hi all,
I have searching the error for this dump, the dump is in report RM07MARCS for the BADI 'ARC_MM_MATBEL_CHECK'. In SE19 I called it like ZARC_MM_MATBEL_CHECK, but this time it return me a dump in report CL_EXITHANDLER================CM001 when SAP create with CREATE OBJECT sentence.
The text for the dump is :
Anál.errores / Analysis of errors
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_CREATE_OBJECT_ERROR',
     was neither
    caught nor passed along using a RAISING clause, in the procedure "GET_INSTANCE"
     "(METHOD)"
    Since the caller of the procedure could not have expected this exception
     to occur, the running program was terminated.
    The reason for the exception is:
    The class entered dynamically at CREATE OBJECT
     ("CLASS=CL_EX_ARC_MM_MATBEL_CHECK") cannot be found,
    neither locally. nor as a global class in the system.
Notas para corregir errores / Notes to correct errors
    Either the name of the class is wrong, or the class does not exist.
    Probably the only way to eliminate the error is to correct the program.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "CREATE_OBJECT_CLASS_NOT_FOUND" CX_SY_CREATE_OBJECT_ERRORC
    "CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
    "GET_INSTANCE"
I've checked it in SE18/SE19/SE24 and so on, but I don't find the origin of problem.
Any suggestion or advice is wellcomed.
Thanks in advance.
Best Regards,
Eduardo

Hi,
Thanks by your reply, it has been so useful for me. I copy the report of archiving to a Zreport and I change it in AOBJ.
Why? Two reasons:
- In OSS notes I have found some notes about program error and I dont want that in the future SAP deny us support because the BADI is register in SCCR (prudential reasons), and I dont want to write a message to SAP because it's urgent.
- It's so easy to replace the call to BADI with the module function that I had wrote in the BADI, so:
BAdI ARC_MM_MATBEL_CHECK, Methode CHECK
   IF NOT check_exit IS INITIAL.
      LOOP AT mkpf_tab INTO ls_mkpf.
        CLEAR: lv_veto, lv_detail_text.
       CALL METHOD check_exit->check
         EXPORTING
           im_mkpf        = ls_mkpf
         CHANGING
           ch_veto        = lv_veto
           ch_detail_text = lv_detail_text.
        CALL FUNCTION 'Z_ARCHIV_MM_MATBEL_CHECK_001'
          EXPORTING
            i_mkpf              = ls_mkpf
          IMPORTING
            E_VETO              = lv_veto
            E_DETAIL_TEXT       = lv_detail_text.
        IF NOT lv_veto IS INITIAL.
          IF lv_detail_text IS INITIAL.
            lv_detail_text = text-e04.
          ENDIF.
          DELETE mkpf_tab.
          CONCATENATE     ls_mkpf-mblnr ls_mkpf-mjahr       "v_n833784
            INTO          mkpf_tab_entry
            SEPARATED BY space.
          CALL FUNCTION 'ARCHIVE_PROTOCOL_COLLECT_APPL'
            EXPORTING
              i_object = mkpf_tab_entry
              i_msgtype = 2
              i_text    = lv_detail_text.                   "^_n833784
        ENDIF.
      ENDLOOP.
   ENDIF.
Thanks newly by your time.
Regards.
Eduardo

Error the class for ABAP mapping doesnt exist

hi PI gurus,
i faced a probleme when i was trying to call a second Mapping which type is ABAp after another one which type is Message Mapping, why i m doing that because i was trying to folow the step by step of michal :
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0279207250DB01347930475897169967End?blog=/pub/wlg/6398
but the problem is i get the error that the class doesnt exist but i m sure that the class exist and i cheked in se24.
do you have any idea ????
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_EXCEPTION_RS (type SAP-ABAP, kernel error ID CREATE_OBJECT_CLASS_NOT_FOUND) The object could not be created: The class Z_ABAP_MAPPING_EXCEPTION_RS does not exist.</SAP:Stack>
thanx.

Check this thread
[Re: SOP Confituration- Maintain Copy Profiles version A00 not maintained |SOP Confituration- Maintain Copy Profiles version A00 not maintained;
thanks
G. Lakshmipathi

Error in BP because of missing country

Hi Gurus!!! first of all merry xmast!!!
I need you help since I cannot see where the error is. I am using CRM 7.0 and in the UI when saving a transaction I get the following errors "The region 00 is not defined for country" and "The country is not set". I have made the following verifications:
UI
--> Assingment Block: Parties involved I have checked that both the customer and employee responsible have the country and region
--> The transaction type used does not have the field "country".
GUI
--> PPOMA_CRM: I checked that the organization has the country set.
-->BP :I double checked that the BPs customer and employee responsible have the country and region assigned.
What`s wear is that I seem to be the only one who has this error so I`m reallly confused on how to solve it.
Please help me,
Thanks a lot!!!
Regards,
Lorena.

Check all business partners used in that transaction and also all organizational units (sales organization, sales office, sales group). I would say that on one of this you have wrong country code defined in master data.
Regards.

Rutine error in PPOMA_CRM ( CREATE_OBJECT_CLASS_NOT_FOUND )

Similar Messages

Maybe you are looking for