SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

Similar Messages

Runtime Error: CREATE_OBJECT_CLASS_NOT_FOUND

Dear Friends,
My system is worked fine. But after Kernel Upgradation. I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Error CREATE_OBJECT_CLASS_NOT_FOUND
Exception CX_SY_CREATE_OBJECT_ERROR
CREATE OBJECT: Class "\CLASS=CL_IM_FI_PAYREF_BADI_010" could not be found.
What happened?
Error in ABAP application program.
The current ABAP program "CL_EXIT_MASTER================CP"
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CREATE_OBJECT_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"INSTANTIATE_IMP_CLASS" "(METHOD)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The class entered dynamically at CREATE OBJECT
("\CLASS=CL_IM_FI_PAYREF_BADI_010") cannot be found,
neither locally. nor as a global class in the system.
Can somebody Please tell me the solution of this error.
Thanks and Rrgards,
Rahul Asthana

Hello Friend,
Thanks for your Answer.
Friend i have tried it, but still i am facing same problem.
Thanks and Regards,
Rahul Asthana.
Edited by: Arun Kamath on Feb 22, 2012 3:27 PM

Query 0: Runtime error There is already a line with the same key. with para

Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.

Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps!

Autorization issue with SAP Query and RPTQTA10

Dear all,
I am having some difficulties with autorisations in SAP Query and Report RPTQTA10.
in IT2006 I have a subtype 03 which should not be accessible for a group of users.
Also I have created a test employee with a sybtype of IT2006 which is allowd and one which is not allowed.
When I run some reports with that user I get a nice result with PT50. Only the allowed subtypes are being displayed.
When I try to run A SAP Query or report PRTQTA10, the employee is not visible and seems to end op in an error list.
Can someone shed some light on this issue?
Kind regards,
Patrick

Hallo,
Follow like this...
Role 1:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 01, 02 - Keep only sub type 01, 02
fuction group: * -Ok
Role 2:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 03 - Keep only sub type 03
fuction group: * -Ok
Then user who want only sub type 01 & 02 then assign role 1 and he will not have access to sub type 03
User who want only sub type 03 access, then assign role 2 only so that he will not have access to sub type 01 & 01
User who want sub type 01, 02 & 03 access, gibe Role 1 & Role 2
Hope it clarifies.
Regards,
Purnima

SAP Query and infoset rename

HI
Is it possible to rename sap query and infoset at a same time instead of changing one by one.?
Thanks
reg
cns

Dear Sathya,
SAP does not allow you to rename SAP Query & Info set at a same time.
Note:
The system has to lock the following objects before you are able to use the Rename SAP Info set function:
User group catalog
Info Set catalog
Query catalogs for user groups to which the Info Set that you are renaming is assigned,
Queries using this Info Set
Once all these locks have been set, the system can carry out the function.
Renaming an Info Set can, however, be very time-consuming. These locks may also prevent other users from working in the system for as long as it takes to rename the Info Set.
Thanks & Regards
Dinu

Diff between sap query and abap query

diff between sap query and abap query

Hi,
ABAP query is mostly used by functional consultants.
SAP Query :
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query,:
As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
regards,
vasavi.
reward if it is helpful.

I went to download the latest i Tunes update but somehow it went wrong and I ended up removing i Tunes from my system and re installing it but I can't get it to reinstall. I keep getting error massages Error 7(windows error 1114) and runtime error R6034,

I attempted to download the latest i Tunes update but somehow it all went wrong and I have ended up trying to reinstall iTunes but it does not work. I keep getting error messages-Error 7 (windows error 1114) and Runtime error-" R6034 an application has attempted to to load the runtime library incorrectly". Help what do I do now?

Hello there, tulchan.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Difference between sap query and sap ad hoc query

Hello Experts-
Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
Thanks,

Hi,
SAP Query
Purpose
The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
All data required by a user for a report can be read from various tables.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
AD Hoc Query
Definition
A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
Use
You can use the Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
In particular it enables you to:
·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
·        Restrict or filter key figures and characteristics
·        Use predefined key figure structures and restricted or calculated key figures in the query
·        Set or change query properties and key figure/characteristic properties in the query
·        Create or change conditions and exceptions
When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
·        You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
-        You cannot use key figures or key figure structures in the filter.
-        You cannot define exception cells, since this requires two structures.
You cannot create the following objects using the Ad-hoc Query Designer Web item:
-         Reusable structures
-         Reusable restricted key figures
-         Reusable calculated key figures
-        Local calculated key figures
You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
"Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
Reward points if useful....
Regards
AK

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

I just tried to install the iTunes update 11.4.1 and keep getting error messages. I have never had this issue before over many years of using iTunes and getting updates to the software. I have removed the iTunes from my computer and reinstalled it but keep getting the errors. Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Sap query and additional fields.

Hello guys.
ABAP it's not my strong skill, but i need to develop some report.
What i need:
input: material, SLED, plant
output: material, SLED, plant, values from characteristic field.
I have created sap query with additional field type c.
Below my code:
TYPES: BEGIN OF charast,
        ATNAM(50)    TYPE c,
        ATWTB(8)     TYPE n,
        X(50)        TYPE n,
        C(50)        TYPE n,
        ATINN(50)    TYPE n,
        END OF charast.
DATA: char TYPE TABLE OF charast WITH HEADER LINE.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR              = MCH1-MATNR
     CHARG              = MCH1-CHARG
     GET_CLASSIFICATION = 'X'
   TABLES
     CHAR_OF_BATCH      = char.
LOOP AT char into TEST (This is an additional field type C.
   ENDLOOP.
Questions:
1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
5. How i can return result of a program not only to additional field but to layout?
Sorry for noob questions and thank you in advance guys!

Well, seems like it work fine for me.
Below my crappy, but working code:
DATA: material TYPE MCHB-MATNR,
       batch    TYPE MCHB-CHARG,
       plant    TYPE MCHB-WERKS,
       sloc     TYPE MCHB-LGORT,
       gtdt     TYPE STANDARD TABLE OF clbatch,
       gtdit    TYPE clbatch.
SELECT MATNR INTO material FROM MCHB
   WHERE MATNR = MCHB-MATNR.
ENDSELECT.
SELECT CHARG INTO batch FROM MCHB
   WHERE CHARG = MCHB-CHARG.
ENDSELECT.
SELECT WERKS INTO plant FROM MCHB
   WHERE WERKS = MCHB-WERKS.
ENDSELECT.
SELECT LGORT INTO sloc FROM MCHB
   WHERE LGORT = MCHB-LGORT.
ENDSELECT.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR = material
     CHARG = batch
     WERKS = plant
     GET_CLASSIFICATION = 'X'
    TABLES
      CHAR_OF_BATCH = gtdt.
READ TABLE gtdt INTO gtdit
   WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
GTD = gtdit-ATWTB.

Sap query AND sapnwrfc

Hi all,
I have a working "sap query" (sq01).
This query prints the list of our material catalog (module MM).
My problem is to write an external program that displays the same output.
To this purpose I installed "sapnrfc".
All works correctly: I can connect to SAP, read a table (for example MARAV) and output the content.
In SAPGui (sq01), I selected "InfoSet Query" and then "Display field information".
I see (for example) that the "Material Number" is stored in the table MARAV (field MATNR).
The problem is that in my "sap query" there are a couple of fields that I do not know where they come from.
Selecting "Display field information" for these fileds I only see:
TXT_ITA (Additional field)
TXT_TET (Additional filed)
Where is this information stored ?
Perhaps there is a view ... or a better method.
Thanks for any help.
Miche

Dear Sathya,
SAP does not allow you to rename SAP Query & Info set at a same time.
Note:
The system has to lock the following objects before you are able to use the Rename SAP Info set function:
User group catalog
Info Set catalog
Query catalogs for user groups to which the Info Set that you are renaming is assigned,
Queries using this Info Set
Once all these locks have been set, the system can carry out the function.
Renaming an Info Set can, however, be very time-consuming. These locks may also prevent other users from working in the system for as long as it takes to rename the Info Set.
Thanks & Regards
Dinu

BI SAP Query Connector Heatmap Error - Empty display in Visual composer

Hi,
I am trying to create an Heatmap iview in SAP Visual Composer using BI SAP Query Connector.
While using the Heatmap template, we are able to see the data but finally when we deploy and run the iview we see empty screen.
Any inputs is highly appreciated.
Regards,
Sreeram

Hi,
thanks for your time and help. Its a relevant blog but unfortunately doesnot solve my problem.
I am using BI SAP Query Connector system instead of BI JDBC. While creating the Heatmap I am able to select the fields and see the output in table format, but finally the chart is not appearing. its blank.
IGS is configured correctly, able to reach backend to select tables, select fields. After deployment and when the ivew is run I dont even see any heatmap, but a blank container.
Please suggest if you have any clues regarding this.
Regards,
Sreeram

OpenPS4MSP Version 2.02 and Runtime error 429

Hi,
I don't have experience of intergration Project System(PS) & MS Project. I have done following steps and got error message Runtime error 429
1. Install fully SAPGUI on client pc ok. sapgui and server IDES work well
2. Install OpenPS4MSP Version 2.02 on client PC ok.
3. Open Connection from OpenPS4MSP to server ok
4. Menul -> OpenPS --> Download Project: Display a dialog, Choose Project Definition, Click on ... button, And then the error message "Runtime error 429" occurs
Please Help!!!
Thank you very much
Long
Message was edited by:
Long Nguyen

I have the same error to.... sometimes thats not happend and show me a mensage to insert the note 166870... and that note are for version 4.5 and I´m working at ECC 6.0.
Someone can help ?

Blank Screen Simulation and Runtime Error 'DATA_BAD_REFERENCE'

Hi Gurus,
I manage to create eCATT for ID creation using TCode SU01 earlier and it works fine - so HAPPY :). Then, I try to develop another eCATT for indirect roles assignment using Tcode PP01 > Position > Relationship B007: AG Role.
However, I'm stuck at the Screen Simulation step to insert the 'Import Parameter' whereby the recorded screen seems to be blank (boxes without text) and when I try to proceed using the 'Next Screen' button, I got the Runtime Error message 'DATA_BAD_REFERENCE'.
Am I missing something here? Or do I need to consult ABAPer to debug the error? Appreciate your guidence on this matter as I'm very very new to eCATT development.
Regards and millions thanks !

Hi,
I have seen the similar issue posted by other users in this forum earlier. But no luck on the solution. I would recommend to insert the import parameter into the interface manually instead of using the simulation screen.
Fields having mode u2018Su2019 (Set) under each dynpro of the command interface contain some value that you entered during the recording. This is the value one needs to parameterize as Import Parameter. so that with next run a new set of data will be passed to the recording. Change the value of the VALIN for these fields and replace with your import variable name.
Hope this will solve your problem.
thanks
Venkat

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Similar Messages

Maybe you are looking for