RV180 DHCP IP Bind and Torrent

Helo,
First of all I'd like to ask excuse me because of my English, hope still will understandable what are my problems.
So not so long time ago a get a RV180 router and I have confugured well but I have realized that the torrent upload speeds does not reach that speed what was before this router. I mean that I give updolad speed of 2,4Mbytes and it works only between 400-600K but with this previous router (mikrotik) it hang nearly all the time at the top of the speed limit.
I have tried many setting around firewall but I'm not sure wich one is cause the problem. Nothing has changed only the routers, so i'm sure there is something different between the mikrotik and rv180.
My second problem is that when I boot up any of my computers (note with wifi or wired pc) it takes to much time to get the ip. It takes about one minute ot more after the windows are loaded fully..
Is there any solutions or should I turn back to the previous router? I'm using the rv180 with the latest firmware.
Thank You for Your help!
David

I forogot to tell that the download speed of torrent and from other place are ok. And If I check the internet speed with meter is absolutly ok, so only problem with the torrent upload and ip bind speed.

Similar Messages

2009.04-1 archboot "Schlumpi" hybrid image and torrent file released

Hi Arch community,
Arch Linux (archboot creation tool) 2009.04-1, "Schlumpi" has been released.
To avoid confusion, this is not an official arch linux iso release!
Check Readme.txt file for more information on archboot.
ftp://ftp.archlinux.org/iso/archboot/Readme.txt
Hybrid image file and torrent is provided, which include
i686 and x86_64 core repository. Please check md5sum before using it.
Hybrid image file is a standard CD-burnable image and also a raw disk image.
- Can be burned to CD(RW) media using most CD-burning utilities.
- Can be raw-written to a drive using 'dd' or similar utilities.
This method is intended for use with USB thumb drives.
Please get it from your favorite arch linux mirror:
ftp://ftp.archlinux.org/iso/archboot/2009.04/
<yourmirror>/iso/archboot/2009.04/
Changelog:
GENERAL:
- kernel 2.6.29.1 usage
- pacman 3.2.2 usage
- RAM recommendations:
* arch or arch64 boot image
256 MB RAM i686/x86_64 (all packages selected, with swap partition)
* lowmem or lowmem64 boot image
96 MB RAM i686/x86_64 (all packages selected, with swap partition)
FIXES:
- fixed network settings in rc.conf on ftp install and dhcp
- fixed use mirror from ftp install
- fixed broken memtest binary
- fixed broken dmraid
New Setup Features:
- Added consistent menu dialog switching
- Added software raid, lvm2 and luks encrytpion creation support to setup
- Added new autoconfiguration of mkinitcpio.conf
- Added ntfs creation support in CD installation
(uses ntfs-3g, which is not supported in ftp installation mode!)
- Added root password dialog instead of plain shell dialog
- Added ext4 support
Environment changes:
- added virtio kernel modules for virtualization
- added crda for correct wireless support
- added ntfs-3g support
KNOWN ISSUES:
- iwlwifi-3945-ucode and ipw2100-fw is not complete.
Reason: One firmware file is missing.
Workaround:
- mount image and install firmware from image file.
eg. cdrom:
mount /dev/cdrom /src
pacman -U /src/core-$(uname -m)/pkg/iwlwifi-3945-ucode-15.28.2.8-1-$(uname-m).pkg.tar.gz
pacman -U /src/core-$(uname -m)/pkg/ipw2100-fw-3.1-2-$(uname-m).pkg.tar.gz
- grub cannot detect correct bios boot order.
It may happen that hd(x,x) entries are not correct,
thus first reboot may not work.
Reason: grub cannot detect bios boot order.
Fix: Either change bios boot order or change menu.lst to correct entries
after successful boot.
This cannot be fixed it's a restriction in grub!
Further documentation can be found on-disk and on the wiki.
Have fun!
greetings
tpowa
Last edited by tpowa (2009-04-25 13:28:59)

Could you include dhclient in the next iteration of the boot image?
I'm testing the boot image in virtualbox and dhcpcd can't get a proper configuration using dhcp, everything is correct except the dns servers.
I believe this may be due to a change (or bug) in vbox but what is curious is that dhclient can get everything right. I've seen threads where other people report having problems with dhcpcd and dhclient working properly (with physical machines I believe). dhclient would be there only as a fallback and would need to be invoked from the command line so it doesn't force any change in the setup scheme.

Rc.local script to bind and add ldap server

Greetings All,
For the past few years, I've used the script below to bind and add authentication servers to my client machines. The process is simple enough, copy the rc.local script (ref'd below) to /etc/ as root and reboot the client. The problem now, is I don't know if this will work in 10.6. As I read this script, I realized there have been enough changes in location of files and file names between 10.5 and 10.6 that this script isn't going to work.
My question to you guys is this: Is anyone else taking care of their binding/auth services in a similar manner? If so, would you mind sharing the script you're using?
Thanks,
-dave
Here's mine:
#!/bin/sh
# WARNING -- REMEMBER TO UNCOMMENT THE SELF-DELETING LINE!
#Site and/or District-specific Variables
#Local Admin in Image
LOCADMIN="tech" # Local admin user in your image
LOCPASSWD="techpwd" # Local admin password in your image
#Open Directory
ODSITESERVER="odr1.mydomain.edu" # FQDN of the Open Directory Server
ODADMIN="diradmin" # Directory Admin for Open Directory
ODPASSWD="diradminpwd" #Password for OD Directory Admin
### DO NOT EDIT BELOW THIS LINE!
OSMAJORVER=`sw_vers | grep ProductVersion | awk '{print $2}' | cut -c 1-4`
ENETADDRESS=`ifconfig en0 | grep ether | awk '{print $2}'`
#Give the network time to come online
logger "Sleeping 30 seconds"
sleep 30
#Set Date and Time
case $OSMAJORVER in
10.3) date > /Library/Logs/binder.log 2>&1
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/sys temsetup-panther -setusingnetworktime off >> /Library/Logs/binder.log 2>&1
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/sys temsetup-panther -setusingnetworktime on >> /Library/Logs/binder.log 2>&1
date >> /Library/Logs/binder.log 2>&1 ;;
10.4) date > /Library/Logs/binder.log 2>&1
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/sys temsetup-tiger -setusingnetworktime off >> /Library/Logs/binder.log 2>&1
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/sys temsetup-tiger -setusingnetworktime on >> /Library/Logs/binder.log 2>&1
date >> /Library/Logs/binder.log 2>&1 ;;
10.5) date > /Library/Logs/binder.log 2>&1
/usr/sbin/systemsetup -setusingnetworktime off >> /Library/Logs/binder.log 2>&1
/usr/sbin/systemsetup -setusingnetworktime on >> /Library/Logs/binder.log 2>&1
date >> /Library/Logs/binder.log 2>&1 ;;
esac
#Set Bonjour and Computer Names
# logger "Setting Bonjour and Computer Names"
# SERIALNUMBER=`ioreg -l |grep IOPlatformSerialNumber | awk '{print $4}' | cut -d \" -f 2`
# SECONDOCTET=`ifconfig -a | grep inet | grep -v inet6 | awk '{print $2}' | grep ^10\. | head -n 1 | awk 'BEGIN {FS="."}; { printf "%03d", $2 }'`
# COMPUTERID="A""$SECONDOCTET""$SERIALNUMBER"
# logger "Computer name is $COMPUTERID"
# scutil --set LocalHostName "$COMPUTERID"
# scutil --set ComputerName "$COMPUTERID"
# sleep 3
#Set the Open Directory Server we are binding to based on the second octet of the IP address received from the DHCP lease
# case $SECONDOCTET in
# 002|005|047|110|112|115|119|121|123|128|133|153|241|247|250|251|253) ODSITESERVER="a941wgm.austinisd.org" ; RING="A1N";;
# 009|045|046|052|053|107|109|117|131|132|138|144|151|154|155|179) ODSITESERVER="a117wgm.austinisd.org" ; RING="B1N";;
# 004|006|010|048|055|056|102|106|118|129|141|149|152|157|159|161|163|164|165|178 |189|244|249) ODSITESERVER="a006wgm.austinisd.org" ; RING="C1N";;
# 003|012|015|044|051|105|108|111|116|122|124|125|126|127|139|142|145|150|245) ODSITESERVER="a044wgm.austinisd.org" ; RING="D1N";;
# 007|043|049|058|103|104|114|140|146|160|162|168|171|174|175|176|185|190|246|101 ) ODSITESERVER="a007wgm.austinisd.org" ; RING="B1S";;
# 101) ODSITESERVER="a007wgm.austinisd.org" ; RING="B2S";;
# 008|013|017|054|059|061|120|130|136|147|156|166|172|173|182|184) ODSITESERVER="a008wgm.austinisd.org" ; RING="C1S";;
# 057|060|113|143|148|158|170|180|181|183|248) ODSITESERVER="a008wgm.austinisd.org" ; RING="C2S";;
# *) ODSITESERVER="a000wgm.austinisd.org" ; RING="A0N";;
# esac
#Remove Existing Directory Services Config
logger "Removing existing DS Config"
rm -R /Library/Preferences/DirectoryService/ActiveDirectory*
rm -R /Library/Preferences/DirectoryService/DSLDAPv3PlugInConfig*
rm -R /Library/Preferences/DirectoryService/SearchNode*
rm -R /Library/Preferences/DirectoryService/ContactsNode*
rm -R /Library/Preferences/edu.mit.*
rm -R /etc/krb5.keytab
#Enable and disable appropriate plugins
case $OSMAJORVER in
10.3) defaults write /Library/Preferences/DirectoryService/DirectoryService "Active Directory" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "LDAPv3" "Active" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "AppleTalk" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "SLP" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "BSD" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "SMB" "Inactive" >> /Library/Logs/binder.log 2>&1
plutil -convert xml1 /Library/Preferences/DirectoryService/DirectoryService.plist >> /Library/Logs/binder.log 2>&1 ;;
10.4) defaults write /Library/Preferences/DirectoryService/DirectoryService "Active Directory" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "LDAPv3" "Active" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "AppleTalk" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "SLP" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "BSD" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "SMB" "Inactive" >> /Library/Logs/binder.log 2>&1
plutil -convert xml1 /Library/Preferences/DirectoryService/DirectoryService.plist >> /Library/Logs/binder.log 2>&1 ;;
10.5) defaults write /Library/Preferences/DirectoryService/DirectoryService "Active Directory" "Inactive" >> /Library/Logs/binder.log 2>&1
defaults write /Library/Preferences/DirectoryService/DirectoryService "LDAPv3" "Active" >> /Library/Logs/binder.log 2>&1 ;;
esac
#Copy in updated ldap.conf file for Leopard machines, which disables the verification of SSL certs used for LDAP Authentication
case $OSMAJORVER in
10.5) cp /etc/ldap.conf-leopard /etc/openldap/ldap.conf ;;
esac
#Kill Directory Services and respawn to return to DS Defaults
logger "Respawning DS"
killall -9 DirectoryService
#Running "id" triggers a DS Respawn
id "$LOCADMIN" >> /Library/Logs/binder.log 2>&1
sleep 3
#Fix SearchNode plist
case $OSMAJORVER in
10.3) logger "Disabling LDAP via DHCP"
defaults write /Library/Preferences/DirectoryService/SearchNodeConfig "DHCP LDAP" -dict "/Sets/0" -bool FALSE >> /Library/Logs/binder.log 2>&1
plutil -convert xml1 /Library/Preferences/DirectoryService/SearchNodeConfig.plist >> /Library/Logs/binder.log 2>&1
killall -9 DirectoryService >> /Library/Logs/binder.log 2>&1
sleep 3 ;;
10.4) logger "Disabling LDAP via DHCP"
defaults write /Library/Preferences/DirectoryService/SearchNodeConfig "DHCP LDAP" -dict "/Sets/0" -bool FALSE >> /Library/Logs/binder.log 2>&1
plutil -convert xml1 /Library/Preferences/DirectoryService/SearchNodeConfig.plist >> /Library/Logs/binder.log 2>&1
killall -9 DirectoryService >> /Library/Logs/binder.log 2>&1
sleep 3 ;;
esac
#Configure LDAPv3 Plugin -- fix with site-specific data
logger "Configuring LDAPv3 Plugin"
case $OSMAJORVER in
10.4) dsconfigldap -v -l "$LOCADMIN" -q "$LOCPASSWD" -a "$ODSITESERVER" -n "Open Directory" >> /Library/Logs/binder.log 2>&1 ;;
10.5) dsconfigldap -v -l "$LOCADMIN" -q "$LOCPASSWD" -a "$ODSITESERVER" -n "Open Directory" >> /Library/Logs/binder.log 2>&1 ;;
esac
sleep 3
#Make sure we init DS and confirm connectivity to each LDAP directory
logger "Checking OD Node Connectivity"
date >> /Library/Logs/binder.log
echo "Checking OD Node Connectivity" >> /Library/Logs/binder.log
dscl localhost -list /LDAPv3/$ODSITESERVER/Groups >> /Library/Logs/binder.log 2>&1
#Configure Search Path
logger "Configuring Search Nodes"
date >> /Library/Logs/binder.log
echo "Configuring Search Nodes" >> /Library/Logs/binder.log
dscl localhost -read /Search >> /Library/Logs/binder.log 2>&1
case $OSMAJORVER in
10.3) defaults write /Library/Preferences/DirectoryService/SearchNodeConfig "Search Policy" -int 3
defaults write /Library/Preferences/DirectoryService/SearchNodeConfig "Search Node Custom Path Array" -array "/LDAPv3/$ODSITESERVER"
killall -9 DirectoryService ;;
10.4) dscl /Search -append / CSPSearchPath "/LDAPv3/$ODSITESERVER" >> /Library/Logs/binder.log 2>&1
dscl /Search -create / SearchPolicy CSPSearchPath >> /Library/Logs/binder.log 2>&1 ;;
10.5) dscl /Search -append / CSPSearchPath "/LDAPv3/$ODSITESERVER" >> /Library/Logs/binder.log 2>&1
dscl /Search -create / SearchPolicy CSPSearchPath >> /Library/Logs/binder.log 2>&1 ;;
esac
date >> /Library/Logs/binder.log
echo "Confirming Search Nodes" >> /Library/Logs/binder.log
dscl localhost -read /Search >> /Library/Logs/binder.log 2>&1
#Remove any stale computer records from Open Directory
logger "Removing stale computer records from OD"
dscl /LDAPv3/"$ODSITESERVER" -search Computers ENetAddress "$ENETADDRESS" | awk 'BEGIN {FS="\t\t"}; { print $1 }' | while read COMPNAME
do
dscl -u "$ODADMIN" -P "$ODPASSWD" /LDAPv3/"$ODSITESERVER" -delete Computers/"$COMPNAME" >> /Library/Logs/binder.log 2>&1
done
#Add computer record to Open Directory
logger "Adding new Computer Record to OD"
dscl -u "$ODADMIN" -P "$ODPASSWD" /LDAPv3/"$ODSITESERVER" -create Computers/`scutil --get LocalHostName` ENetAddress "$ENETADDRESS" >> /Library/Logs/binder.log 2>&1
#Add to designated computer list - this is ONLY for 10.4 server. This will need to be replaced for 10.5 server.
COMPUTERGROUP="Unprovisioned" # Computer List
logger "Adding to Computer List: $COMPUTERLIST"
dscl -u "$ODADMIN" -P "$ODPASSWD" /LDAPv3/"$ODSITESERVER" -create Computers/"$COMPUTERID" ENetAddress "$ENETADDRESS"
dscl -u "$ODADMIN" -P "$ODPASSWD" /LDAPv3/"$ODSITESERVER" -append ComputerLists/"$COMPUTERGROUP" Computers "$COMPUTERID"
#Refresh the MCX Cache
logger "Refeshing the MCX Cache"
case $OSMAJORVER in
10.3) /System/Library/LoginPlugins/MCX.loginPlugin/Contents/MacOS/MCXCacher -f >> /Library/Logs/binder.log 2>&1
/System/Library/LoginPlugins/MCX.loginPlugin/Contents/MacOS/MCXCacher >> /Library/Logs/binder.log 2>&1 ;;
10.4) /System/Library/CoreServices/mcxd.app/Contents/Resources/MCXCacher -f >> /Library/Logs/binder.log 2>&1
/System/Library/CoreServices/mcxd.app/Contents/Resources/MCXCacher >> /Library/Logs/binder.log 2>&1 ;;
esac
#Disable automatic login on the client
defaults write /Library/Preferences/.GlobalPreferences com.apple.userspref.DisableAutoLogin -bool TRUE
#Enable login hooks on the client
case $OSMAJORVER in
10.4|10.5) defaults write /var/root/Library/Preferences/com.apple.loginwindow EnableMCXLoginScripts -bool true
defaults write /var/root/Library/Preferences/com.apple.loginwindow MCXScriptTrust Anonymous ;;
esac
#Enable Directory Services Status by default on loginwindow
# case $OSMAJORVER in
# 10.4|10.5) defaults write /Library/Preferences/com.apple.loginwindow AdminHostInfo DSStatus ;;
#esac
#Modify the binder log so that only admin viewers may access the file
chmod u=rw,go= /Library/Logs/binder.log
sleep 5
#killall loginwindow
sleep 5
#Comment the lines below, until shutdown if you do not want the script to replace itself with a 30 second delay on startup to ensure the client receives a DHCP lease before loginwindow appears
case $OSMAJORVER in
10.3|10.4) echo sleep 30 > /etc/rc.local ;;
*) srm /etc/rc.local ;;
esac
shutdown -r now
#Exit
exit 0

The first thing I would verify is if you can connect and traverse your Active Directory/Domain Controller using Softerra's free ldap browser.
1. Softerra ldap browser link
http://download.softerra.com/files/ldapbrowser26.msi
Put in the IP/hostname of the domain controller, use the same BASE DN, and user credentials that you used on the IronPort appliance.
I would highly recommend that you create a separate account for the IronPort. (i.e. ironportldap). Do this so that you don't have to worry about accidentially resetting the password and then forgetting to update the IronPort appliance.
2. Once you've verified that you can connect and see your tree, use the same settings from Softerra ldap browser and put them in the IronPort ldap interface.
Try this for your Accept query string
(|(mail={a})(proxyAddresses=smtp:{a}))
3. If it still fails, enable the ldap debug log if you haven't already and paste in the error.
We are trying to add an LDAP Server Profile but everytime we try to test the Accept Query we get an
"Error - Error: configuration error" message.
We are using AD, top of the tree for base DN. dc=domain, dc=local.
We tried communicating with 2 different servers via telnet on ports 389, 3268, both are open.
Tried port 389 and 3268, no SSL, Anynomous and User Password authentication methods.
The error left us clueless since we followed the instructions on the user manual.
For the accept query we tried this query string: (proxyAddresses=smtp:{a})
Any ideas or pointers to what could be causing this are very appriciated.
Thanks.
Ed.

Model Binding and Calculated Field Syntax for "class" Attribute

Hi,
I tried to use the calculated field syntax from SAP UI5 to change the CSS class attribute of an element based on some model property, i.e., I wanted to change the class in the corresponding formatter function based on the currently bound value. However, my formatter function is not called. When I use the same syntax on a text attribute, it works.
I also tried to use normal property binding, but it did not work on the class attribute either (it just put class="{property}" in the rendered HTML).
Is there anything I missed or is it just not possible to use property binding and calculated field syntax for class attributes? Did anybody try something like this before?
I think it is a standard use case to change the CSS class based on some model property. So, if anybody knows how to do that, could you give a short example?
Best regards
Svenja

They have a class property. At least, I can do the following in an XML view:
<Button
              icon="sap-icon://add"
              press="onButtonPress"
              class="my-button-class" />
I would expect the following to work as well, but for me it did not:
<Button
              icon="sap-icon://add"
              press="onButtonPress"
              class="{/customClass}" />
This renders the following HTML (cropped to the important parts):
<button type="button" class="sapMBtn {/customClass}">
</button>
It seems like the class attribute is something special although I don't see a reason why. Other HTML templating engines, for example, support things like that.

Getting "Ordinal binding and Named binding cannot be combined" error

Hello,
I am getting following exception while calling stored produre:
*"Ordinal binding and Named binding cannot be combined"*
I am calling stored procedure with JDBC with 1 input parameter and 1 output parameters as mentioned below:
CallableStatement collableStat = connection.prepareCall("{ call sp_clnt_intermed_validation(?,?) };
// Registering In parameters
collableStat.setString("p_user_name", "SampleUser");
// Registering Out parameters
for(String paramKey : paramKeysSet) {
collableStat.registerOutParameter("p_success_flag", Types.VARCHAR);
// execute stored procedure
collableStat.execute();
Please guide.
Regards,
Akshay.
Edited by: 914678 on Feb 15, 2012 5:48 AM

Why is the registerOutParameter in a loop?
You don't state your DB version but as of 10g there is no support for named parameters for a PL/SQL function because there is no 'name' of the returned parameter. So use ordinal indexes for both parameters.
Instead of
collableStat.setString("p_user_name", "SampleUser");
collableStat.registerOutParameter("p_success_flag", Types.VARCHAR);use
collableStat.setString(1, "SampleUser");
collableStat.registerOutParameter(2, Types.VARCHAR);Next time post this in the JDBC forum.
Edited by: rp0428 on Feb 15, 2012 11:48 AM

Where to find javax.xml.bind and javax.jdo

One of my application require import javax.xml.bind and javax.jdo packages. I could not find them. Someone can help to let me know where to download them or they come with some other toll\packages?
Thanks
John

Hi John ,
I have the same problem: Getting the javax.jdo Packge . . . .(WHERE ?)
if you found out ow already, please tell me at: [email protected]
thanks,
edan

Is it ok to download movies using bitTorrent and torrent in macbook pro

is it ok to download movies using bitTorrent and torrent in macbook pro

Do so at your own peril. Torrent sites are well known to host malware.
Ciao.

Component binding and state saving

Hello,
I have a few questions in regards to component binding and state saving (specifically in regards to the reference implementation) when the saving method is client and backing-beans are in the request scope rather than in the session scope:
1) if a component instance is bound to a backing-bean property then does the state of that component get saved when the view state is saved?
2) for UIData component, if the component value is bound to a list, does the actual list (after being wrapped) serve as the local data for the component? If this is the case, when the state is saved and then subsequently restored, does the list get re-created with the original number of items?
Regards,
Len Takeuchi

Thanks for the quick response.
(2) The actual list is not saved; the list will be
re-queried on subsequent requests.The list composition may have changed by the time the list is re-queried. If the table being displayed is updatable then transfer of information from request back to the list (during Apply Request Values) may not happen properly. So does that pretty much mean that the original list has to be kept around (in the session)? If the state saving method is server then does the saved state maintain a reference to the original list across requests?
Len Takeuchi

Where can I find BIND and C-compiler software

I just install Solaris 8 on my sunblade, i t will be used as a test DNS server. Does anyone know where can I find/download the BIND and CC software? Is it on the installation CD or do I need to download. Thanks.
Sonny

It might be on the "Software Companion" CD in the Bonus Software booklet but gcc & bind are also located at:
http://sunfreeware.com/
Click on Sparc/Solaris 8 to see what versions are available.
Download info & FAQs are in left column.
John

WD Tut18: when to bind and when to addElement() ???

Hi All,
I am trying <b>Context Programming and Data Binding (18) tutorial</b>.
I am slight confused.. when to bind() and when to addElement()'s:
page 22>>
newCustomerNodeElement.nodeAddress().bind(newAddressNodeElement);
page 26>>
node.addElement(newOrderNodeElement);
page23 explanation >>
Note that, if you call the method bind (newCustomerNodeElement) instead of addElement(newCustomerNodeElement), only the last bound node element of the type Customer is contained in the list of node elements. That is, wdContext.nodeCustomers().bind(newCustomerNodeElement) overwrites the list of node elements of the type Customer.
Is it that .. when the cardinality is 0..1 (or) 1..1>> we have to <b>bind</b> elements and when cardinality 0..n (or) 1..n >> we have to <b>addElement();</b> ??
Also i didn't get the exact advantage of a supplyFunction.
Can any1 help me out ?? explain me .. more detailedly ???
Thank u very much in advance,
kanth.

Beginner,
In general, bind and addElement are interchangeable: you may either bind or addElement.
For example, if cardinality is 0..1 you may add sole element or bind this element. If the cardinality is 0..n then you may either bind collection of elements or add elements one by one.
Typically, bind is used when you populate node content initially, addElement is used when user adds/removes already populated node.
VS

PXE, WDS and DHCP Option 66 and 67 PXE-M0F: Exiting

Hello,
I have configured DHCP options 66 and 67 to point to my site server running WDS and SCCM 2012 R2 with a DP with PXE enabled.
My DHCP server is on 10.1.54.199 and my sccm server is on 10.1.184.60 whilst my client is on 10.1.141.245. I have set the options in DHCP to 10.1.184.60 and SMSBoot\x86\wdsnbp.com
When i boot my client I get
Client MAC:xxxx GUID:xxxxxClient IP: 10.1.141.245, MASK: 255.255.254.0, DHCP IP: 10.1.54.199Gateway IP: 10.1.140.1TFTP.PXE-M0F: Exiting Intel Boot Agent.
Can anyone offer any help on where to begin troubleshooting this? Previously this has all worked but the server was recently moved to a new IP address and VLAN where IP helpers are not configured. This method worked a treat for us in 2007 but for whatever
reason not in 2012?
Any advice would be greatly appreciated.

Hi Gerry, Yes When I added the second DP to the All DPs Distribution Point Group it then went and distributed some 70 or so packages, among these were the boot images. I just double checked and the second DP is listed in the content locations tab for both
boot images.
Hi Jason,
Not yet but when i tried this earlier (16:00 ish where I am) the date modified time of the log had not changed (it reported sometime like 14:30). I will have a look in the log... It has indeed changed...
It seems to be looping through a process of:
Begin Validation of Certificate thumbprint...
Completed Validation of Certificate thumbprint...
PXE Client Certificate Valid...
Purging Old Images 0...
Purging Old Images 0...
There are a few lines above from a few hours earlier (when i installed the second DP and enabled PXE) where it shows it adding files to install que, No errors though. Further up the log I can see errors...
Initializing PXEPerfObject. SMSPXE 18/02/2014 14:21:18 3164 (0x0C5C)
Failed to get logging settings for 'ccmperf' from Registry (80070002) SMSPXE 18/02/2014 14:21:18 3164 (0x0C5C)
Could not load logging configuration for component ccmperf. Using default values. SMSPXE 18/02/2014 14:21:18 3164 (0x0C5C)
Client is set to use HTTPS when available. The current state is 224. SMSPXE 18/02/2014 14:21:19 3164 (0x0C5C)
CLibSMSMessageWinHttpTransport::Send: URL: primary-site-server.co.uk:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONEX SMSPXE 18/02/2014 14:21:19 3164 (0x0C5C)
RequestMPKeyInformation: Send() failed. SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
Failed to get information for MP: http://primary-site-server.co.uk. 80004005. SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::MP_InitializeTransport failed; 0x80004005 SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::MP_LookupDevice failed; 0x80004005 SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE Provider failed to initialize MP connection.
Unspecified error (Error: 80004005; Source: Windows) SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
CLibSMSMessageWinHttpTransport::Send: URL: primary-site-server.co.uk:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONEX SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
RequestMPKeyInformation: Send() failed. SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
Failed to get information for MP: http://primary-site-server.co.uk. 80004005. SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::MP_InitializeTransport failed; 0x80004005 SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::MP_ReportStatus failed; 0x80004005 SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::CPolicyProvider::InitializeMPConnection failed; 0x80004005 SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE 18/02/2014 14:21:21 3164 (0x0C5C)
I am not sure if the above is relevant but it is the only stuff marked red in cmtrace in SMSPXE thats around the timeframe where I was testing it earlier today.
Any suggestions?
EDIT: I dont think I have imported the web server certificate on the second DP or configured IIS to use this cert for https, I am guessing that is what these error are all about? Not sure why this would effect PXE though especially as it should be getting the
content from the first DP. I will crack on sorting this cert problem tomorrow and see if it fixes the issue I am having with PXE with no IP Helper.
EDIT 2: I also changed the DHCP option 67 from SMSBoot\x86\wdsnbp.com to SMSBoot\\x86\\wdsnbp.com. It may have been the \\ in here that also helped solve my problem.

Is there a Difference between Binding and Mapping

Hello together,
in SAP NetWeaver Library they speak about Data Binding and Mapping
http://help.sap.com/saphelp_nw70/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Is Binding and Mapping the same thing? Or is there any difference?
Am I right in thinking binding works the following way:
There´s Context-Element NAME into the Component-Controller-Context,
a Context-Element NAME into the View-Controller-Context and one UI-Element on my View-Layout.
In the next step, I bind View-Controller-Context-Element NAME against the Element in the Component-Controller-Context, and the UI-Element against the element into the view controller.
While runtime, the Context-Element of the Component-Controller-Context gets created.
Is it right, that because of the binding, all involved Controller-Contexts work on the same reference of the
data-object, which is behind Context-Element NAME?
Thank you very much.
With regards,
Oliver

Hi,
Both are different,binding is between view UI element and view context node/attribute.Mapping is between two controlleres like view controller and component controller.The detailed information is given in the below article about context.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60730016-dbba-2a10-8f96-9754a865b814
also check this document about different contrlleres in Web Dynpro for ABAP
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/b9/b82c4142aef623e10000000a155106/content.htm

Difference betwee "Binding" and "Partner Link"

Hi Forum - Could you please explain the difference between Binding and Partner Link and when to use which one?
Thanks!

Thanks for the explanations. Can I create a service with just the SOAP binding without usnig BPEL partner links in Oracle BPEL?
I have tried this however BPEL is adding a reference to my WSDL and then creating a partner link by itself in the reference binding. How can I stop it from doing that?
The reason I want to do that is becasue I have a BPEL project which has two processes, which I expose as web sevices by creating the WSDL file manually (not using auto wizard).
I have deployed this project on weblogic soa domain but its giving me two endpoints for it and two links to wsdl file, one for each process. Is this normal?
Thanks!

Difference between binding and value

Hi
I am new to JSF
Can you tell me what is the difference between binding and value attribute of a
JSF component ?
Many thanks.

Hi,
the binding is the component association to a managed bean (or backing bean). This allows you to manipulate the component in Java code stored in a managed bean.
The value is what the actual component value is.
Frank

Difference between using Binding and Value Attribute

what is the deference between using binding and value attribute, when I use binding attribute at the time of Value change listener is behaving like action listener,
Ex:
If I use value attribute, at the time of value change listener the component is not showing the result in the component but when I use Binding attribute it is happening automatically. So I want to know how the binding attribute is working.
I know, at the time of binding attribute the component is creating an instance at the bean side, So even also how it is following the life cycle of the JSF Frame work, and also Please suggest me weather which one is better to use either Binding or Value?

JNaveen wrote:
If I use value attribute, at the time of value change listener the component is not showing the result in the component but when I use Binding attribute it is happening automatically. So I want to know how the binding attribute is working.You need to learn about the JSF lifecycle. The ValueChangeEvent is invoked after conversion and validation in the 3rd phase, while the model values are updated in the 4th phase. In the valueChangeListener method you normally use ValueChangeEvent#getNewValue() to get the new value after the change.
I know, at the time of binding attribute the component is creating an instance at the bean side, So even also how it is following the life cycle of the JSF Frame work, and also Please suggest me weather which one is better to use either Binding or Value?Use the 'value' attribute to bind the value to the bean. Use the 'binding' attribute to bind the component to the bean. If you don't need to precreate the component or do other things than getting/setting its value, then there is no need for the 'binding' attribute.
Read on those links if you want to know something more about the JSF lifecycle:
[http://balusc.blogspot.com/2006/09/debug-jsf-lifecycle.html].
[http://jcp.org/aboutJava/communityprocess/final/jsr252/index.html] (pick 1st download).

RV180 DHCP IP Bind and Torrent

Similar Messages

Maybe you are looking for