RV220W (1.0.4.17) - losing ability to connect through QuickVPN, reboot needed

I keep getting a lot of errors in my log messages. Please, look at attachment.
My problem manifests itself notoriously every 3-4 days. I have to do reset to connect through QuickVPN.
Please, look at the newest log:
2012-11-26 14:20:48: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=80f1f2dd37522b58:123fc4cc5c3b558a.
2012-11-26 14:20:48: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=e728a1b036ccdb32:76014c353c9099fe.
2012-11-26 14:20:48: [rv220w][IKE] WARNING: no phase2 found for "m-test"
2012-11-26 14:20:48: [rv220w][IKE] INFO: IPSec configuration with identifier "m-test" deleted sucessfully
2012-11-26 14:20:49: [rv220w][IKE] ERROR: sainfo identifier not found ("m-test")
2012-11-26 14:20:49: [rv220w][IKE] ERROR: Failed to Delete the IPSec configuration with identifier "m-test"
2012-11-26 14:20:49: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-93.154.129.33[4500] with spi:80f1f2dd37522b58:123fc4cc5c3b558a
2012-11-26 14:20:49: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-93.154.129.33[4500] with spi:e728a1b036ccdb32:76014c353c9099fe
2012-11-26 14:20:49: [rv220w][IKE] ERROR: remote identifier not found ("")
2012-11-26 14:20:49: [rv220w][IKE] ERROR: Failed to Delete the IKE configuration with identifier ""
2012-11-26 14:24:52: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:24:52: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:00: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:00: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:01: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:01: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:02: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:02: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:05: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:05: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:08: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:08: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:11: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:11: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:14: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:14: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:17: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:17: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:21: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:21: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:24: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:24: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:27: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:27: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:30: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:30: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:33: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:33: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:36: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:36: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:39: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:39: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:42: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:42: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
2012-11-26 14:25:45: [rv220w][IKE] ERROR: Invalid exchange type 243 from 88.196.5.36[16].
2012-11-26 14:25:45: [rv220w][IKE] ERROR: Could not find configuration for 88.196.5.36[16]
I'm so tired of the continuous reset the router...
Edited by: Thomas Michalski

Today I experience even stranger behavior
this time even restart does not help
application QucikVPN shows an error and does not create tunnel
however, in the administration panel, the user appears to be connected
log:
2011-01-01 00:00:42: [rv220w][IKE] INFO: IKE started
2011-01-01 02:02:18: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "MKConnect"
2011-01-01 02:02:18: [rv220w][IKE] INFO: Adding IKE configuration with identifier "MKConnect"
2011-01-01 02:02:51: [rv220w][IKE] INFO: IKE stopped
2011-01-01 02:02:53: [rv220w][IKE] INFO: IKE started
2011-01-01 02:02:54: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "MKConnect"
2011-01-01 02:02:54: [rv220w][IKE] INFO: Adding IKE configuration with identifier "MKConnect"
2011-01-01 02:03:44: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2011-01-01 02:03:45: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2011-01-01 02:03:47: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:20:59: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:21:36: [rv220w][IKE] INFO: IKE stopped
2012-12-12 11:21:38: [rv220w][IKE] INFO: IKE started
2012-12-12 11:21:39: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "MKConnect"
2012-12-12 11:21:39: [rv220w][IKE] INFO: Adding IKE configuration with identifier "MKConnect"
2012-12-12 11:21:58: [rv220w][IKE] INFO: IKE stopped
2012-12-12 11:22:00: [rv220w][IKE] INFO: IKE started
2012-12-12 11:22:01: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "MKConnect"
2012-12-12 11:22:01: [rv220w][IKE] INFO: Adding IKE configuration with identifier "MKConnect"
2012-12-12 11:22:08: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:22:09: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:22:11: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:22:14: [rv220w][IKE] INFO: IKE stopped
2012-12-12 11:22:16: [rv220w][IKE] INFO: IKE started
2012-12-12 11:22:16: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "MKConnect"
2012-12-12 11:22:16: [rv220w][IKE] INFO: Adding IKE configuration with identifier "MKConnect"
2012-12-12 11:23:23: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:23:24: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:23:26: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:23:30: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:24:33: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:24:34: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:24:37: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:24:40: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:25:53: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:25:54: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:25:56: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:26:00: [rv220w][IKE] ERROR: Could not find configuration for 88.149.181.128[500]
2012-12-12 11:26:40: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "mk-test"
2012-12-12 11:26:40: [rv220w][IKE] INFO: Adding IKE configuration with identifier "mk-test"
2012-12-12 11:26:43: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[500].
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[500]
2012-12-12 11:26:43: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:26:43: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:26:43: [rv220w][IKE] INFO: For 88.149.181.128[500], Selected NAT-T version: RFC 3947
2012-12-12 11:26:44: [rv220w][IKE] INFO: NAT-D payload matches for 46.28.241.202[500]
2012-12-12 11:26:44: [rv220w][IKE] INFO: NAT-D payload does not match for 88.149.181.128[500]
2012-12-12 11:26:44: [rv220w][IKE] INFO: NAT detected: PEER
2012-12-12 11:26:44: [rv220w][IKE] INFO: Floating ports for NAT-T with peer 88.149.181.128[54975]
2012-12-12 11:26:44: [rv220w][IKE] INFO: ISAKMP-SA established for 46.28.241.202[4500]-88.149.181.128[54975] with spi:6234ae59f51fa46e:767c84c57bfdca16
2012-12-12 11:26:44: [rv220w][IKE] INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2012-12-12 11:26:44: [rv220w][IKE] INFO: Responding to new phase 2 negotiation: 46.28.241.202[0]<=>88.149.181.128[0]
2012-12-12 11:26:44: [rv220w][IKE] INFO: Using IPsec SA configuration: 192.168.0.0/24<->192.168.0.16/32
2012-12-12 11:26:44: [rv220w][IKE] INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2012-12-12 11:26:44: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 54975->4500]: ESP/Tunnel 88.149.181.128->46.28.241.202 with spi=235876248(0xe0f2f98)
2012-12-12 11:26:44: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 4500->54975]: ESP/Tunnel 46.28.241.202->88.149.181.128 with spi=2590254398(0x9a64253e)
2012-12-12 11:27:14: [rv220w][IKE] INFO: an undead schedule has been deleted: 'pk_recvupdate'.
2012-12-12 11:27:14: [rv220w][IKE] INFO: Purged IPsec-SA with proto_id=ESP and spi=2590254398(0x9a64253e).
2012-12-12 11:27:14: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=6234ae59f51fa46e:767c84c57bfdca16.
2012-12-12 11:27:15: [rv220w][IKE] WARNING: no phase2 found for "mk-test"
2012-12-12 11:27:15: [rv220w][IKE] INFO: IPSec configuration with identifier "mk-test" deleted sucessfully
2012-12-12 11:27:15: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-88.149.181.128[54975] with spi:6234ae59f51fa46e:767c84c57bfdca16
2012-12-12 11:27:15: [rv220w][IKE] WARNING: no phase1 found for "mk-test"
2012-12-12 11:27:15: [rv220w][IKE] INFO: IKE configuration with identifier "mk-test" deleted sucessfully
2012-12-12 11:27:15: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "mk-test"
2012-12-12 11:27:15: [rv220w][IKE] INFO: Adding IKE configuration with identifier "mk-test"
2012-12-12 11:27:18: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[500].
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[500]
2012-12-12 11:27:18: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:18: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:18: [rv220w][IKE] INFO: For 88.149.181.128[500], Selected NAT-T version: RFC 3947
2012-12-12 11:27:22: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[500].
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[500]
2012-12-12 11:27:22: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:22: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:27:22: [rv220w][IKE] INFO: For 88.149.181.128[500], Selected NAT-T version: RFC 3947
2012-12-12 11:27:22: [rv220w][IKE] INFO: NAT-D payload matches for 46.28.241.202[500]
2012-12-12 11:27:22: [rv220w][IKE] INFO: NAT-D payload does not match for 88.149.181.128[500]
2012-12-12 11:27:22: [rv220w][IKE] INFO: NAT detected: PEER
2012-12-12 11:27:22: [rv220w][IKE] INFO: Floating ports for NAT-T with peer 88.149.181.128[54975]
2012-12-12 11:27:22: [rv220w][IKE] INFO: ISAKMP-SA established for 46.28.241.202[4500]-88.149.181.128[54975] with spi:a40cc887fba17130:ceb68a542e2be5d0
2012-12-12 11:27:22: [rv220w][IKE] INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2012-12-12 11:27:22: [rv220w][IKE] INFO: Responding to new phase 2 negotiation: 46.28.241.202[0]<=>88.149.181.128[0]
2012-12-12 11:27:22: [rv220w][IKE] INFO: Using IPsec SA configuration: 192.168.0.0/24<->192.168.0.16/32
2012-12-12 11:27:23: [rv220w][IKE] INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2012-12-12 11:27:23: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 54975->4500]: ESP/Tunnel 88.149.181.128->46.28.241.202 with spi=150477233(0x8f819b1)
2012-12-12 11:27:23: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 4500->54975]: ESP/Tunnel 46.28.241.202->88.149.181.128 with spi=1882202289(0x703020b1)
2012-12-12 11:28:18: [rv220w][IKE] ERROR: Phase 1 negotiation failed due to time up for 88.149.181.128[500]. 413c589713f8bf63:ddd3bbd10b497c11
2012-12-12 11:29:20: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "mk-test2"
2012-12-12 11:29:32: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[63020].
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[63020]
2012-12-12 11:29:32: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:29:32: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:29:32: [rv220w][IKE] INFO: For 88.149.181.128[63020], Selected NAT-T version: RFC 3947
2012-12-12 11:29:32: [rv220w][IKE] INFO: NAT-D payload matches for 46.28.241.202[500]
2012-12-12 11:29:32: [rv220w][IKE] INFO: NAT-D payload does not match for 88.149.181.128[63020]
2012-12-12 11:29:32: [rv220w][IKE] INFO: NAT detected: PEER
2012-12-12 11:29:32: [rv220w][IKE] INFO: Floating ports for NAT-T with peer 88.149.181.128[58145]
2012-12-12 11:29:32: [rv220w][IKE] INFO: ISAKMP-SA established for 46.28.241.202[4500]-88.149.181.128[58145] with spi:358b08830b0aa15a:9962476ade8cf013
2012-12-12 11:29:32: [rv220w][IKE] INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2012-12-12 11:29:53: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=358b08830b0aa15a:9962476ade8cf013.
2012-12-12 11:29:54: [rv220w][IKE] WARNING: no phase2 found for "mk-test2"
2012-12-12 11:29:54: [rv220w][IKE] INFO: IPSec configuration with identifier "mk-test2" deleted sucessfully
2012-12-12 11:29:54: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-88.149.181.128[58145] with spi:358b08830b0aa15a:9962476ade8cf013
2012-12-12 11:29:54: [rv220w][IKE] ERROR: sainfo identifier not found ("mk-test2")
2012-12-12 11:29:54: [rv220w][IKE] ERROR: Failed to Delete the IPSec configuration with identifier "mk-test2"
2012-12-12 11:29:54: [rv220w][IKE] ERROR: remote identifier not found ("")
2012-12-12 11:29:54: [rv220w][IKE] ERROR: Failed to Delete the IKE configuration with identifier ""
2012-12-12 11:32:23: [rv220w][IKE] INFO: an undead schedule has been deleted: 'pk_recvupdate'.
2012-12-12 11:32:23: [rv220w][IKE] INFO: Purged IPsec-SA with proto_id=ESP and spi=1882202289(0x703020b1).
2012-12-12 11:32:24: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[500].
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[500]
2012-12-12 11:32:24: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:32:24: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:32:24: [rv220w][IKE] INFO: For 88.149.181.128[500], Selected NAT-T version: RFC 3947
2012-12-12 11:32:24: [rv220w][IKE] INFO: NAT-D payload matches for 46.28.241.202[500]
2012-12-12 11:32:24: [rv220w][IKE] INFO: NAT-D payload does not match for 88.149.181.128[500]
2012-12-12 11:32:24: [rv220w][IKE] INFO: NAT detected: PEER
2012-12-12 11:32:24: [rv220w][IKE] INFO: Floating ports for NAT-T with peer 88.149.181.128[54975]
2012-12-12 11:32:24: [rv220w][IKE] INFO: ISAKMP-SA established for 46.28.241.202[4500]-88.149.181.128[54975] with spi:384bbd58ba55b90a:a84afa687a9cbdac
2012-12-12 11:32:24: [rv220w][IKE] INFO: Responding to new phase 2 negotiation: 46.28.241.202[0]<=>88.149.181.128[0]
2012-12-12 11:32:24: [rv220w][IKE] INFO: Using IPsec SA configuration: 192.168.0.0/24<->192.168.0.16/32
2012-12-12 11:32:24: [rv220w][IKE] INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2012-12-12 11:32:25: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 54975->4500]: ESP/Tunnel 88.149.181.128->46.28.241.202 with spi=242919503(0xe7aa84f)
2012-12-12 11:32:25: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 4500->54975]: ESP/Tunnel 46.28.241.202->88.149.181.128 with spi=3164297225(0xbc9b5809)
2012-12-12 11:34:18: [rv220w][IKE] INFO: an undead schedule has been deleted: 'pk_recvupdate'.
2012-12-12 11:34:18: [rv220w][IKE] INFO: Purged IPsec-SA with proto_id=ESP and spi=3164297225(0xbc9b5809).
2012-12-12 11:34:18: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=384bbd58ba55b90a:a84afa687a9cbdac.
2012-12-12 11:34:18: [rv220w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=a40cc887fba17130:ceb68a542e2be5d0.
2012-12-12 11:34:19: [rv220w][IKE] WARNING: no phase2 found for "mk-test"
2012-12-12 11:34:19: [rv220w][IKE] INFO: IPSec configuration with identifier "mk-test" deleted sucessfully
2012-12-12 11:34:19: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-88.149.181.128[54975] with spi:384bbd58ba55b90a:a84afa687a9cbdac
2012-12-12 11:34:19: [rv220w][IKE] INFO: ISAKMP-SA deleted for 46.28.241.202[4500]-88.149.181.128[54975] with spi:a40cc887fba17130:ceb68a542e2be5d0
2012-12-12 11:34:19: [rv220w][IKE] WARNING: no phase1 found for "mk-test"
2012-12-12 11:34:19: [rv220w][IKE] INFO: IKE configuration with identifier "mk-test" deleted sucessfully
2012-12-12 11:34:19: [rv220w][IKE] INFO: Adding IPSec configuration with identifier "mk-test"
2012-12-12 11:34:19: [rv220w][IKE] INFO: Adding IKE configuration with identifier "mk-test"
2012-12-12 11:34:23: [rv220w][IKE] INFO: Configuration found for 88.149.181.128[500].
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received request for new phase 1 negotiation: 46.28.241.202[500]<=>88.149.181.128[500]
2012-12-12 11:34:23: [rv220w][IKE] INFO: Beginning Identity Protection mode.
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received Vendor ID: RFC 3947
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:34:23: [rv220w][IKE] INFO: Received unknown Vendor ID
2012-12-12 11:34:23: [rv220w][IKE] INFO: For 88.149.181.128[500], Selected NAT-T version: RFC 3947
2012-12-12 11:34:23: [rv220w][IKE] INFO: NAT-D payload matches for 46.28.241.202[500]
2012-12-12 11:34:23: [rv220w][IKE] INFO: NAT-D payload does not match for 88.149.181.128[500]
2012-12-12 11:34:23: [rv220w][IKE] INFO: NAT detected: PEER
2012-12-12 11:34:24: [rv220w][IKE] INFO: Floating ports for NAT-T with peer 88.149.181.128[54975]
2012-12-12 11:34:24: [rv220w][IKE] INFO: ISAKMP-SA established for 46.28.241.202[4500]-88.149.181.128[54975] with spi:1e132d66de83ecd7:83eed503d4f27fe5
2012-12-12 11:34:24: [rv220w][IKE] INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2012-12-12 11:34:24: [rv220w][IKE] INFO: Responding to new phase 2 negotiation: 46.28.241.202[0]<=>88.149.181.128[0]
2012-12-12 11:34:24: [rv220w][IKE] INFO: Using IPsec SA configuration: 192.168.0.0/24<->192.168.0.16/32
2012-12-12 11:34:24: [rv220w][IKE] INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2012-12-12 11:34:24: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 54975->4500]: ESP/Tunnel 88.149.181.128->46.28.241.202 with spi=22547734(0x1580d16)
2012-12-12 11:34:24: [rv220w][IKE] INFO: IPsec-SA established[UDP encap 4500->54975]: ESP/Tunnel 46.28.241.202->88.149.181.128 with spi=714334032(0x2a93df50)

Similar Messages

Lost ability to connect through port forwarding after cisco guest software install

Using Remote Admin 2.2 software to remote into work computer.
E1000 I installed the cisco guest software on my pc and configured the guest about 2 months ago.
Needed to get into office PC this past weekend and connection fails.
Have a static IP address on router. forward a single port to my office machine within the router.
Get nothing but an error on connection. Router is 2.1.02 build 6Jan 15, 2013.
Log file shows nothing on the incoming log? dynamic ip at home...
Another office worker, on the same internal network, has gotomypc running and port forwarding setup on router and he is still working fine, he can access his pc from home. The only change I have made to router was the cisco connect for guest access.
Is it possible this is stopping my remote admin?
thanks kevin

Hey kevboac! Make sure that the computer you're using to access the remote computer is connected to the main wireless network and not to the Guest network. Being connected to the Guest network will prevent you from doing File and Printer Sharing, and Remote Access. Hope this helps!

Officejet pro 8500A; loses ability to connect to the server

Hi all,
For the past month or so, my network printer has developed a glitch. Everytime I or my family sends a document to print, we see the messaging "preparing to print" and the printer never prints! I ran the printer trouble shooting on my Windows 7 professional and was given the message: "The printer was unable to connect to the server. You can connect to the printer to the internet through a proxy server, to do so, touch Enter Proxy and enter details when prompted"
Well, I've never used a proxy. My printer was working fine till recently.
The only temporary "fix" I could come up with was to shut down the printer and power it back on. It would go through a checking printheads or cleaning printheads, etc. Sometimes the "eprint" button would be circled in red. If so, I hit it and asked to retry finding the server. This usually works. After all this, I had a small ( 1hour?) window that I could print or scan documents. After this, the printer develops a case of amnesia and I'm back to square one.
I've downloaded the latest drivers. Windows updates are current.
This is getting extremely frustrating. What the heck is going on???
Thanks

Hello @fsh42na,
Welcome to the HP forums.
I understand that you are experiencing some network issues with your Officejet Pro 8500A.
I would like to help.
The printers ability to connect to the Web Services server should have no impact on your local network printing.
It sounds to me like you have two separate issues.
Your temporary fix of turning off the printer is a step in the right direction.
When your printer powers back on, it connects with the router. This new connection is what gives you the ability to print.
Since it only lasts for an hour try the following:
Turn off your printer and other network devices.
Unplug the power cord to your router for at least a minute.
plug the power cord back into the router.
Turn on the printer and other network devices.
Test print.
If you use the Web Services (ePrint) feature on your printer, try setting a manual DNS.
Though the server connection issue will probably get resolved with the network reset, the manual DNS will not hurt anything.
The following reply by happytohelp01, has instructions for setting a manual DNS.
Efax 7510 still won't work after turning off/on ePrint several times
The post is for a Photosmart 7510, but the steps should be very similar.
If you need any further assistance, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My tabs will not restore after starting Firefox -- even with the option to restore my tabs and windows is checked in the "options" window. I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

Is there something else I need to tweak to get rid of this annoyance instead of simply clicking the check box? I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

I have recently lost the ability to connect my ipad to Apple TV. Any thoughts?

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

After updating to ios 8 i keep losing my internet connection, and have to restart every time?

After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.

Hi Turn Router off for 30 seconds Goto Settings Reset Network Settings After reset you need to enter your router wireless key. Also later check on website for a Firmware update for your router. Cheers Brian

Lost ability to connect to open WiFi router

I've been using Leopard 10.5 that was installed when I bought the computer, and just updated to 10.5.4 which solved a problem I had running the original Adobe CS, InDesign was running 100+ percent of the CPU and crashing. But, I also lost the ability to connect to the open, non-WEP WiFi network in my studio. I have no idea why it won't connect and the computer connects fine at home to my airport. I think the router at my studio is a Linksys or something, but I really need to get my MacBook Pro to connect back to the router. Also, airport seems to be scanning continuously and fails to show the networks quickly. It seems very laggy.
Any suggestions?

If you see line after line of "Airport Beacon (Lost)" messages, the problem is with 10.5.3 upgrade, if you installed 10.5.4 a few days later when it came out, you still have the problem.
That is simply not true. Beacons can be "lost" for a lot of reasons - and it has been happening to some people before 10.5.3 [Check the history!|http://discussions.apple.com/search.jspa?threadID=&q=airport+10.5.2&ob jID=&dateRange=thisyear&userID=&numResults=15&rankBy=10001]. It might be the 10.5.3 upgrade in some situations. I am a bit suspicious of the interaction between some Netgear routers and OS X, but I have not tested that theory very thoroughly.

Satelite C660 keeps losing its wireless connection

Hi
We have bought the above laptop for our son for christmas and it keeps losing its wireless connection, we also have a Satelite L450 which is running fine (not losing internet connection) we have been onto our broadband supplier they have told us that as the wireless connection on our other laptop is fine, it is something to do with the C660, one of the drivers needs an update, unfortuneately I have forgotten the driver name but it is something to do with the modem, Our son is desperate to use his laptop.
Can anyone help?

Had the same problem but with a different Satellite model - the signal was fine on another laptop in the room - the problem was the power management option / power plan - the link below says it all but in short if it is on balanced the default option the default means that it tells the router to go into a power save mode that it might not support.
http://support.microsoft.com/kb/928152
Have a read, hope it helps as it worked for me and is a very simple solution!
Message was edited by: AndreaEoF
Sorry just realised it was covered in post above, I just expanded on it a little.

I recently installed Os Lion and now I keep losing my internet connection...I think it must be the upload...

I recently installed Os Lion and now keep losing my internet connection, numerous times a day. Before the upgrade, I never had a connectivity issue. Can you advise me how to correct this problem?

The answer may be found in the More Like This column. Have you checked there?

Why does my ipod keep losing its network connection?

My ipod keeps losing its network connection every few minutes. Ive tried resetting the network settings, resetting the router and neither worked. Apart from my SpeedTouch router being knackered any other suggestions please?

Any chance there is interference in the area?
Do other devices and computers work? and are they wired or not?

Could you please add the abillity to search through layers?

Could you please add the abillity to search through layers?

CS6 has search capabilities in the Layers panel. You can search by layer type, name, Layer Effect, Blend Mode, Layer Atribute (i.e. whether a layer is visible or not) and by Assigned Layer colors)

How do i stop losing my internet connection?

I am running with OS 10.5.8. Today I started randomly losing my internet connection. It is not caused by the computer going in to sleep mode as I have seen other threads mention. I connect to the internet wirelesssly but Airport indicates there is nothing wrong with my connection and all the other computers in the house are functioning just fine.
The only time I can get the internet to work is after I turn off AirPort and turn it back on, then it will only work for a few seconds. Network Diagnostics is no help, it tells me my connection is fine. I have tried deleting the network profile and recreating it, rebooting the system, resetting the PRAM, and making sure the software is up-to-date (when I can get a connection). All these attempts only make it work for a few seconds before it quits again.
Does anybody know how to fix this? Has anybody else experienced the same problem?

I am running with OS 10.5.8. Today I started randomly losing my internet connection. It is not caused by the computer going in to sleep mode as I have seen other threads mention. I connect to the internet wirelesssly but Airport indicates there is nothing wrong with my connection and all the other computers in the house are functioning just fine.
The only time I can get the internet to work is after I turn off AirPort and turn it back on, then it will only work for a few seconds. Network Diagnostics is no help, it tells me my connection is fine. I have tried deleting the network profile and recreating it, rebooting the system, resetting the PRAM, and making sure the software is up-to-date (when I can get a connection). All these attempts only make it work for a few seconds before it quits again.
Does anybody know how to fix this? Has anybody else experienced the same problem?

When trying to download ITunes rel 10, I keep losing my intenet connection

When trying to update and download ITunes release 10, I keep losing my internet connection - message I keep getting is "There might be a problem with the driver for the Local Adaptor Connection adaptor".
I keep restoring my PC to a previous point which gets me back my internet but now have lost all access to Itunes ( version 9 ). I have alos tried uninstalling all Itunes products but the internet connection
failed during this sequence as well.
I've never had any issues with upgrading Itunes before. Can someone PLEASE help
me through this. Thank you.

You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards.

Updated to 10.9.5, now I'm losing my wifi connection.

My iMac(7,1) has been running 10.9.4 since early July with nary a problem. A few days ago I finally updated to 10.9.5 and since then I keep losing my wifi connection to my router. One of three things will happen:
1. My wifi connection is intact, but I can't reach any network resource — not the internet, not my home server, not even the router itself. I have to turn off Airport, then turn it back on again. Once it's back on again *sometimes* it will automatically reconnect to the router, other times I have to manually reconnect it to the router.
2. My wifi connection will simply drop. Where I would normally have full signal strength shown in the menu bar, I would suddenly show no signal at all — and not be connected to the router. I have to manually re-select my router to reestablish the connection and get online again.
3. Same as #2, except that after manually re-selecting the router I'm dumped into #1 where I can't reach any network resource.
During any/all of this, none of my other network devices — printers, video game consoles, iOS devices, other computers — are having any problems.
I've tried repairing permissions, cleaning out caches, zapping PRAM, reinstalling the 10.9.5 combo update, repairing the keychain, removing my router password from the keychain, "forgetting" my router connection, resetting the Mac's network connections and re-adding them, switching from DHCP to static, and making a sacrifice to Cthulu. Nothing helps. I *have* noticed that when I boot my Mac from a 10.9.4 clone that I made about a week ago, I have NO wifi problems whatsoever. Whatever problem I'm having is a direct result of 10.9.5.
Any ideas?

I had a lot of connection drops and hangs after 10.9.5. It seems there's some compatibilty problem with the Router / Airport / 10.9.5. Did everything, on my computer and airport with no luck, but what worked for me was to reset the router to factory settings and start from 0.
Some 3rd party routers have compatibity issuses with Mac, if the above doesn't work I will recommend to go back to 10.9.4 if you if a Time Machine, and wait a bit for Yosemite launch in a few days. Becasue I don't think there will be a new 10.9 update available soon.

RV220W (1.0.4.17) - losing ability to connect through QuickVPN, reboot needed

Similar Messages

Maybe you are looking for