Rwcon60 fails to compile batch reports

Not too sure where to place this. I've got some reports which I am using the 9ias rwcon60 utility to compile on Solaris. Individually they compile ok, and via the GUI, but in a multiple batch they fail with syntax errors. See the dump below...
$ ls
admin JOURNAL_DAY_BOOK.rep
dbauth.htm lib
dbsysdif.htm logfile100702.txt
dbsyssam.htm mesg
GRANADA_NW_CREDITS_DAY_BOOK.rdf P1P.rdf
GRANADA_NW_CREDITS_DAY_BOOK.rep P1P.rep
install pub
java server
jh1.txt sysauth.htm
jh2.txt test.rdf
JOURNAL_DAY_BOOK.rdf
$ more jh2.txt
rwcon60 USERID=reporter/reporter01@demo STYPE=RDFFILE SOURCE=(JOURNAL_DAY_BOOK,G
RANADA_NW_CREDITS_DAY_BOOK) DTYPE=REPFILE DUNIT=INCH PAGESIZE=11 x 8.5 OVERWRITE
=YES BATCH=YES LOGFILE=logfile100702.txt
$ . ./jh2.txt
ksh: syntax error: `(' unexpected
What could be going wrong?
Regards,
John

I tried your command and it works fine.
Did you tried to run the command directly from terminal, instead of running from a ksh script file?
It looks like the way you construct and name the ksh script is not correct. Follow the ksh script syntax if you want to invoke from ksh script.
Also note the error message comes from shell, not from reports.
Thanks,
-Shaun

Similar Messages

Rwcon60 fiails to compile in batch mode

Not too sure where to place this. I've got some reports which I am using the 9ias rwcon60 utility to compile. Individually they compile ok, but in a multiple batch they fail with syntax errors. See the dump below...
$ ls
admin JOURNAL_DAY_BOOK.rep
dbauth.htm lib
dbsysdif.htm logfile100702.txt
dbsyssam.htm mesg
GRANADA_NW_CREDITS_DAY_BOOK.rdf P1P.rdf
GRANADA_NW_CREDITS_DAY_BOOK.rep P1P.rep
install pub
java server
jh1.txt sysauth.htm
jh2.txt test.rdf
JOURNAL_DAY_BOOK.rdf
$ more jh2.txt
rwcon60 USERID=reporter/reporter01@demo STYPE=RDFFILE SOURCE=(JOURNAL_DAY_BOOK,G
RANADA_NW_CREDITS_DAY_BOOK) DTYPE=REPFILE DUNIT=INCH PAGESIZE=11 x 8.5 OVERWRITE
=YES BATCH=YES LOGFILE=logfile100702.txt
$ . ./jh2.txt
ksh: syntax error: `(' unexpected
What could be going wrong?
Regards,
John

Have you tried Tools > Cache > Build Cache for SubFolders?
You can point it to your collection and let it go build it's 'droppings'.
Since you didn't find this feature - is there a way we can make this more accessible to more users?
Another approach is to have background indexing process that runs independent of Bridge and watches specific folders. Personally I am not a big fan of background apps - but maybe this feature would be user controlled: run always, run only when Bridge is running, run manually.
Gunar

Crystal Reports XI - failed to compile

We purchased Crystal Report Nov 2007 and had no problem opening a report that was extracted from an accounting database. We are in the process of upgrading this person to a new machine. We installed Crystal and tried to open the report but we get this error "The saved data will be discarded since one or more formulas failed to compile." We have uninstalled and reinstalled and we get the same thing. We checked to see if the versions were different and they are not there both running Crystal XI version 11.0.0.1282 on Windows XP SP2. We have changed machines and we get the same thing yet we go to other machine with the same specs and we have no problems so we don't know what to try next. Can you help? Jill

Hi Jill,
It sounds like the report you are trying to open has a formula that is using an external function. The external function requires a separate DLL that was not installed onto this new machine.
The difficult thing is determining which function in which formula is being used. Have a search on the old machine for U2L*.dll. Copy these to the new machine and into the same folders.
Close Crystal and restart.
Good luck,
Brian

How to batch compile Oracle Reports ?(just like the code for compiling forms)

The following is for Batch compiling forms..
IF %1=="" GOTO END
DEL *.FMX
FOR %%F IN (*.FMB) DO START /W Ifcmp60 USERID=%1 BATCH=Y MODULE=%
%F
:END
Any idea for compiling all reports using a technique just like
this..

User dbms_ldap package in the database to use PL SQL to create your database
account and then an OID account with a RAD to match the database login. If you
You may have to load the DBMS_Ldap package from the database ADMIN directory first to be available in the database.
LDAP SQL Ex.
user_username := LOWER(new_user) || '@domain.com'; -
retval := dbms_ldap.search_s(my_session, ldap_base,
dbms_ldap.scope_subtree, 'uid=' || user_username, my_attrs, 0,
my_message);
retval := dbms_ldap.count_entries(my_session, my_message);
my_entry := dbms_ldap.first_entry(my_session,my_message);
my_dn := dbms_ldap.get_dn(my_session,my_entry);
dbpassword := 'PASSWD01';
isvalidrad := forms_rad.newraddefinition(radname,new_user,dbpassword,
dbtnsnames,errormessage);
sessionestablished := forms_rad.createoidsession(ldap_user, ldap_passwd,
ldap_host, ldap_port, ldap_base);
radcreated := forms_rad.createradforcn(my_dn, 'false', errormessage);
-- Create new user's database account same as RAD account.
v_sql := 'CREATE USER "' || new_user || '" IDENTIFIED BY ' || dbpassword ||
' DEFAULT TABLESPACE JLIM TEMPORARY TABLESPACE TEMP';
EXECUTE IMMEDIATE v_sql;
v_sql := 'GRANT CONNECT TO ' || new_user;
EXECUTE IMMEDIATE v_sql;

How to compile a report in windows

Dear Memebers,
Generally standard reports contain a lot of user exits as a results of which we cannot compile the reports using reports builder. How can we compile a standard report in windows. I know the syntax which is shown below but how should i proceed.
REM WINDOWS COMPILE REPORT
::compile_report.bat
cls
Echo compiling Report .....
for %%f IN (FAS400.rdf) do RWCON60 userid=apps/apps@test batch=yes source=%%f
stype=rdffile DTYPE=REPFILE OVERWRITE=yes logfile=log.txt
ECHO FINISHED COMPILING
What if i have a report in some directory in windows. Can i mention the path and how do i run the above mentioned commands as a script in windows command prompt.
I would really appreciate your help. Correct me if i am wrong.
Thanks
Sandeep

for forms:
REM WINDOWS COMPILE FORMS
::compile_forms.bat
@echo off
cls
SET DBConnectString =
SET /P DBConnectString= Please enter DB connect string (user/password@sid):
SET workingDirectory =
SET /P workingDirectory= Enter the directory where FMBs are located (i.e. c:\dev\forms\):
cd %workingDirectory%
@echo on
echo Compiling Forms....
for /f %%a IN ('dir /b *.fmb') do ifcmp90 module=%%a userid=%DBConnectString% batch=yes
echo Finished Compiling for reports:
REM WINDOWS COMPILE FORMS
::compile_reports.bat
@echo off
cls
SET DBConnectString =
SET /P DBConnectString= Please enter DB connect string (user/password@sid):
SET workingDirectory =
SET /P workingDirectory= Enter the directory where RDFs are located (i.e. c:\dev\reports\):
cd %workingDirectory%
@echo on
echo Compiling Reports....
for /f %%a IN ('dir /b *.rdf') do rwconverter userid=%DBConnectString% batch=yes source=%%a stype=rdffile dtype=repfile overwrite=yes logfile=log.txt
echo Finished Compiling

How To Compile Several Reports 6i At Once

Hi Allz
I want to know how to convert reports 6i rdf to rep at once not one by one.Plz dont give me any link cause i have viewed alls the solution but unable to understand yet.Moreever plz tell me specifically how will i know coversion is completed at once for proof like from where can i get these generated rep files.
Thanks in advance
Khurram Siddiqui

Hi Inolau
I am asking its working fine but where these rep files are generating i have put the batch file in my folder E:\Reports and from command prompt i am running this batch files its k but when i go to E:\Reprots folder there is not even a single rep file for these two reports.However if these rep generating some other directory but its not cause i have searched too for allz directory for exploc.REP and cldpln.REP.
E:\Reports>my.bat
E:\Reports>for %f IN (*.rdf) do RWCON60 userid=ics/ics@ics batch=yes source=%f s type=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=exploc.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=cldpln.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
Thanks for yours prompt response.

How To Compile Several Reports 10g At Once

Hi all,
I want to know how to compile several reports (rdf) 10g at once, not one by one.
Thanks in adwance
Vismantas

Hi Inolau
I am asking its working fine but where these rep files are generating i have put the batch file in my folder E:\Reports and from command prompt i am running this batch files its k but when i go to E:\Reprots folder there is not even a single rep file for these two reports.However if these rep generating some other directory but its not cause i have searched too for allz directory for exploc.REP and cldpln.REP.
E:\Reports>my.bat
E:\Reports>for %f IN (*.rdf) do RWCON60 userid=ics/ics@ics batch=yes source=%f s type=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=exploc.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
E:\Reports>RWCON60 userid=ics/ics@ics batch=yes source=cldpln.RDF stype=rdffile dtype=repfile overwrite=yes logfile=log.txt echo FINISHED COMPILING
Thanks for yours prompt response.

Hyperlink to a zip file fails during compile

RoboHTML v.5.0.3
Windows XP, Office 2007
In my help file I create a hyperlink to a *.zip file (128MB) that is located on my C drive.
The Zip appears in my baggage files.
The Zip file contains an .exe and .msi file.
Everything compiles when creating the chm except the zip file.
Media Manager Demo 3.0.0.5.zip
HHC5001: Error:
Media Manager Demo 3.0.0.5.zip :
An error occurred while reading "c:\Program Files\RoboHelp Office\RoboHTML\ESI Demo Kit\!SSL!\Microsoft_HTML_Help\!chm_tmp_folder_0\Media Manager Demo 3.0.0.5.zip".
HHC5003: Error:
Media Manager Demo 3.0.0.5.zip :
Compilation failed while compiling Media Manager Demo 3.0.0.5.zip.
The following files were not compiled:
Media Manager Demo 3.0.0.5.zip
I've searched for info on this topic but can't find any. Is it possible to create a hyperlink to a Zip file?
Any help is appreciated.

Hi there
Colum may be spot on, but in case that isn't quite it, you may wish to change the file name so that instead of this:
Media Manager Demo 3.0.0.5.zip
It's something like this:
Media_Manager_Demo_3_0_0_5.zip
Note that each space now has an underscore as well as each of the dots having underscores.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Java.lang.RuntimeException: failed to compile execlets (JAVA embeding issue in BPEL 2.0)

HI i was trying to use java code in BPEL 2.0 by using java Embedding. while deploying the application getting the error.
even after importing the corrsponding class
below is the code snippet for the same :
<import location="oracle.soa.management.facade.Locator"
     importType="http://schemas.oracle.com/bpel/extension/java"/>
     <import location="oracle.soa.management.facade.LocatorFactory"
     importType="http://schemas.oracle.com/bpel/extension/java"/>
     <import location="oracle.soa.management.facade.Component"
     importType="http://schemas.oracle.com/bpel/extension/java"/>
<extensionActivity>
      <bpelx:exec name="Java_Embedding1" language="java">
        <![CDATA[Locator locator = LocatorFactory.createLocator();
String compositeRevision = (String)getVariableData("compositeRevision");
String compositeNameRevision = "ASG/ImportCustomerData!"+ compositeRevision;
Composite prowessCustomerComposite = (Composite)locator.lookupComposite(compositeNameRevision);
CompositeInstanceFilter filter = new CompositeInstanceFilter();
filter.setState(CompositeInstance.STATE_RUNNING);]]>
      </bpelx:exec>
    </extensionActivity>
while deploying gettting below error.
06:18:58 PM] Error deploying archive sca_ImportCutomerData_rev1.0.jar to partition "default" on server AdminServer [http://LTRTHIPIREDDY.keste.com:7001]
[06:18:58 PM] HTTP error code returned [500]
[06:18:58 PM] Error message from server:
There was an error deploying the composite on AdminServer: Deployment Failed: Error occurred during deployment of component: importCustomerData_BPEL to service engine: implementation.bpel, for composite: ImportCutomerData: ORABPEL-05250
Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file "E:\Oracle\Middleware\user_projects\domains\Raja_domain\servers\AdminServer\dc\soa_3ca99378-812f-460f-9760-d19a15c0ef44"; the exception reported is: java.lang.RuntimeException: failed to compile execlets of importCustomerData_BPEL
This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
[06:18:58 PM] Check server log for more details.
[06:18:58 PM] Error deploying archive sca_ImportCutomerData_rev1.0.jar to partition "default" on server AdminServer [http://LTRTHIPIREDDY.keste.com:7001]
[06:18:58 PM] #### Deployment incomplete. ####
[06:18:58 PM] Error deploying archive file:/C:/JDeveloper/mywork_Arbonne/CustomerInboundApp/ImportCutomerData/deploy/sca_ImportCutomerData_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Thanks in Advance...
rajashekar

Hi have solved the issue by importing the class file.
<import location="oracle.soa.management.facade.Locator"
          importType="http://schemas.oracle.com/bpel/extension/java"/>
<import location="oracle.soa.management.facade.LocatorFactory"
          importType="http://schemas.oracle.com/bpel/extension/java"/>
<import location="oracle.soa.management.facade.Composite"
          importType="http://schemas.oracle.com/bpel/extension/java"/>
<import location="java.util.List"
          importType="http://schemas.oracle.com/bpel/extension/java"/>
<import location="oracle.soa.management.util.CompositeInstanceFilter"
          importType="http://schemas.oracle.com/bpel/extension/java"/>
<import location="oracle.soa.management.facade.CompositeInstance"
          importType="http://schemas.oracle.com/bpel/extension/java"/>

What is a batch report !

please give me an example of hoe to create a batch report !

Hi,
Creating batch reports
To create a batch report follow this procedure:
Expand IBM TotalStorage Productivity Center → My Reports.
Right-click the Batch Reports node and select Create Batch Report.
Note: If the batch report you want to create is similar to an existing one, click the name of the existing report, edit it and save it using a different name.
Click the Report tab and select the type of report you want to create and move it from Available to Current Selections by clicking . See Selecting batch report options for details of the tab contents.
Click the Selection tab and refine the criteria for selecting and displaying report data. Some options might not be available for all reports.
Select a profile for controlling which data is collected. This option is not available for all reports. See Using profiles for information about profiles.
Click Selection to specify the resources (for example, computers) that will be displayed in the report. This option is not available for all reports. For details about selecting resources, see Selecting resources to appear on a report.
Click Filters to apply filters the data that you want to display (for example, show only the machines that contain over 80% used space). For details about applying filters, see Filtering the resources that appear on a report.
Select the columns you want to include in the report and move them from Available Columns to Included Columns by clicking .
Use the Selection page to:
Click the Options tab of the Batch Report job window, specify the following:
The machine on which the report file will be saved
The report format (for example, HTML)
Whether to run a script when the report process is complete
The format for the name of the batch report
See Selecting batch report options for details of the tab contents.
In the When to Run tab of the Batch Report job window, specify when and how often to run the batch report. See Scheduling a batch report for details of the tab contents.
In the Alert tab of the Batch Report job window, define the conditions that will trigger an alert and the method of notification (for example, e-mail). See Defining alerts for batch reports for details of the tab contents.
Click File → Save and type a name for the batch report. The batch report will be saved using your user ID as a prefix. For example, if you are logged onto IBM TotalStorage Productivity Center as "Smith," the name of the batch report will be Smith.report_name.
Selecting batch report options
Define on what agent computer the batch report will run and the format of the file to which it will be saved.
Scheduling a batch report
Determine when and how often to run a batch report.
Defining alerts for batch reports
Define the alert that will be triggered if the batch report fails to run.
Check the following link for more information.
http://publib.boulder.ibm.com/infocenter/tivihelp/v4r1/index.jsp?topic=/com.ibm.tpc_V33.doc/fqz0_t_create_batch_report.html
Reward if Help ful
Jagadish

Control & Simulation Loop failed to compile

Dear Forum Members,
I have a problem with a Control & Simulation Loop program (attached) that just doesn't compile & run. I believe that the problem is associated with the 'Feedback Node' at the bottom of this Control & Simulation Frame since if this is taken out the program will run ok.
Can anyone please advise me if this 'Feedback Node' is incorrectly used or in violation of anything. I have tried various ways to overcome the problem i.e. initialising it at the start but nothing works. The error message that I received just says "VI failed to compile".
Appreciate any help with this.

Hello bunnykins,
The Feedback node really isn't a supported function in control design and simulation. The behavior you're reporting, and the work around are both documented in the know issues of the module here:
201449
Return
A Feedback Node on a Simulation Diagram causes the VI to fail to compile
The Feedback Node does not make sense semantically within a Simulation Diagram, due to the fact that most ODE Solvers will execute the diagram multiple times per iteration and may need to reject steps and try again, filling the Feedback Node with bad data.
Workaround: Use the Memory block from the Simulation Utility palette. If a delay of greater than 1 is desired you can chain multiple memory blocks in sequence.
Reported Version: 8.5
Resolved Version: N/A
Added: 07/31/2010
Applications Engineer
National Instruments
CLD Certified

Failed to send batch after max errors - Snapshot

I have been replicating happily between 2008 R2 SQL Servers for some time using Transactional replication.
Replication stopped yesterday with the following messages on the source server:
MSSQL_ENG 10054
Communication link failure
MSSQL_ENG 10054
TCP Provider: An existing connection was forcibly closed by the remote host.
MSSQL_ENG Failed to send batch after max errors
MSSQL_ENG Unspecified error
MSSQL_ENG An existing connection was forcibly closed by the remote host.
MSSQL_REPL 0
The process could not bulk copy into table '"pro"."ZZM012X"'.
In the Event Viewer on the target server this message appears:
"A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0)."
So this happened after it had been replicating for some time. I get the same error now when I try to restart it or if I rebuild the publication/subscription completely.
There are 7 tables in the publication - 6 of them bulk copy and then replicate without issue. The error is specific to one table. The table has a column in that is varchar(132) and it contains recipe instructions to our manufacturing plant. If
I replicate the table and exclude this field, it doesn't fail. I initially thought it might be spurious characters in the text column but I have removed these and still get the same error. I have set up a test version of the table and publication/subscription
to enable me to test outside of the live environment. Same errors occur.
Does anyone have any clues or pointers to what might be causing it?
Many thanks
Les

Hi - Thanks for the response.
I have tried numerous tests to try to pinpoint the issue but I am still unable to resolve it. The source server is in Connecticut and the target is in the UK. I have successfully bulk copied and replicated the problem table from the source server
to a new database on the same server. I get the same error if I bulk copy and replicate to another server here in the UK. I have backed up and restored the table in a new database on one of the UK servers and can bulk copy and replicate here to
a second UK server. I have traced the issue to one column, varchar (132) on the problem table. If I exclude the column the table will bulk copy and replicate US to UK. I have created new tables and inserted a subset of the data - no change.
We have looked at network issues also: We have switched off the TCP Global Parameters like Chimney offload and NETDMA - on the adapter and in the OS - as these are reported as a potential problems. We have looked at settings in SonicWall and
tried disabling Intrusion Prevention Service, Anti Virus, Application Control and Anti Spyware. Our next option is to look at MTU packet size to see if that is a possible cause.
We are stumped on this one and have had to exclude the table completely from our manufacturing software which is not ideal but at least keeps us working.
Any further ideas, suggestions or solutions would be gratefully received.

Creating FRCommon system failed - in 11g Forms & Report Installation

Dear all,
When installing 11g Forms and Reports "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
I have successfully created the weblogic server 10.3.5 , and continued with 11g forms & reports. First Installed the forms & reports software, and i try to configure. after several steps of configuration i have failed when its place "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
What it is this Error.
Kindly help me.
My OS Windows
Forms and reports 11gR2
More info
When i start the configuration i have chosen Forms & Reports server and Development tools in the configuration page along with OHS.
Regards
Hamid

Hi experts,
I have the same problem when I try to install oracle Fusion Middleware 11g, is it possible that I forget some steps before, or should I install required something before continue intallation?
Best Regards.
Karim.

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

Rwcon60 fails to compile batch reports

Similar Messages

Maybe you are looking for