Rwcon60 fiails to compile in batch mode

Not too sure where to place this. I've got some reports which I am using the 9ias rwcon60 utility to compile. Individually they compile ok, but in a multiple batch they fail with syntax errors. See the dump below...
$ ls
admin JOURNAL_DAY_BOOK.rep
dbauth.htm lib
dbsysdif.htm logfile100702.txt
dbsyssam.htm mesg
GRANADA_NW_CREDITS_DAY_BOOK.rdf P1P.rdf
GRANADA_NW_CREDITS_DAY_BOOK.rep P1P.rep
install pub
java server
jh1.txt sysauth.htm
jh2.txt test.rdf
JOURNAL_DAY_BOOK.rdf
$ more jh2.txt
rwcon60 USERID=reporter/reporter01@demo STYPE=RDFFILE SOURCE=(JOURNAL_DAY_BOOK,G
RANADA_NW_CREDITS_DAY_BOOK) DTYPE=REPFILE DUNIT=INCH PAGESIZE=11 x 8.5 OVERWRITE
=YES BATCH=YES LOGFILE=logfile100702.txt
$ . ./jh2.txt
ksh: syntax error: `(' unexpected
What could be going wrong?
Regards,
John

Have you tried Tools > Cache > Build Cache for SubFolders?
You can point it to your collection and let it go build it's 'droppings'.
Since you didn't find this feature - is there a way we can make this more accessible to more users?
Another approach is to have background indexing process that runs independent of Bridge and watches specific folders. Personally I am not a big fan of background apps - but maybe this feature would be user controlled: run always, run only when Bridge is running, run manually.
Gunar

Similar Messages

  • Report Compilation through batch mode

    Hi There,
    Could you please guide me how to do the 9i Report Compilation in batch mode.
    I need to compile 40-50 reports at one time on each server.
    We are using IBM-AIX, Win NT, and Solaris OS
    Thanks

    Hi,
    You could look up Note 191529.1 in Metalink
    http://metalink.oracle.com
    Navneet.

  • Compilation in batch mode

    Hi
    I finished forms compilation in batch mode. I want to compile all my reports3.0 to reports 10g in batch mode by executing a batch file, please post the script for the same
    Thanks

    Hello,
    The executable rwconverter in ORACLE_HOME/bin allow to compile the RDF into REP.
    Batch Compile Script for Forms, Reports, Libraries, Menus and also converting Binary to text and back (Doc ID 191529.1)
    Regards

  • Compile Reports in batch mode

    Hi
    I finished forms compilation in batch mode forgot to ask about reports part.
    I want to compile all my reports3.0 to reports 10g in batch mode by executing a batch file, please post the script for the same
    Thanks

    Script for batch compilation of reports in LINUX
    This has all
    Change the name of reports executable for reports 3 and 10g
    Cheers
    Priya

  • Rwcon60 fails to compile batch reports

    Not too sure where to place this. I've got some reports which I am using the 9ias rwcon60 utility to compile on Solaris. Individually they compile ok, and via the GUI, but in a multiple batch they fail with syntax errors. See the dump below...
    $ ls
    admin JOURNAL_DAY_BOOK.rep
    dbauth.htm lib
    dbsysdif.htm logfile100702.txt
    dbsyssam.htm mesg
    GRANADA_NW_CREDITS_DAY_BOOK.rdf P1P.rdf
    GRANADA_NW_CREDITS_DAY_BOOK.rep P1P.rep
    install pub
    java server
    jh1.txt sysauth.htm
    jh2.txt test.rdf
    JOURNAL_DAY_BOOK.rdf
    $ more jh2.txt
    rwcon60 USERID=reporter/reporter01@demo STYPE=RDFFILE SOURCE=(JOURNAL_DAY_BOOK,G
    RANADA_NW_CREDITS_DAY_BOOK) DTYPE=REPFILE DUNIT=INCH PAGESIZE=11 x 8.5 OVERWRITE
    =YES BATCH=YES LOGFILE=logfile100702.txt
    $ . ./jh2.txt
    ksh: syntax error: `(' unexpected
    What could be going wrong?
    Regards,
    John

    I tried your command and it works fine.
    Did you tried to run the command directly from terminal, instead of running from a ksh script file?
    It looks like the way you construct and name the ksh script is not correct. Follow the ksh script syntax if you want to invoke from ksh script.
    Also note the error message comes from shell, not from reports.
    Thanks,
    -Shaun

  • Download created XML File in batch mode // Parse XML file into single lines

    Hello!
    I upload a CSV file and based on that CSV file I create an XML "object". First I uploaded and downloaded it via gui frontendclass, but as it has to be run in a batch in the night I need to upload and download the data via OPEN DATASET.
    The import and transformation of the CSV file works fine, also the transfer into an itab with the same structure as a CSV line is ok. I also create the XML file, which could be downloaded easily with gui-download but it is not permittet.
    Import of data: I scan the folder and get the filenames into a itab, I loop over that itab and read the single files like this:
         OPEN DATASET ls_convert_batch FOR INPUT IN TEXT MODE ENCODING DEFAULT.
          CLEAR tab.
          IF sy-subrc = 0.
            DO.
              READ DATASET ls_convert_batch INTO line.
              IF sy-subrc <> 0.
                EXIT.
              ELSE.
                CLEAR tmptab.
                SPLIT line AT ';' INTO  tmptab-product
                                        tmptab-contract
                                        tmptab-extagent.
                APPEND tmptab TO tab.
              ENDIF.
            ENDDO.
          ENDIF.
    The XML file has a strucutre like
    <file>
    - <file formant_no="1.1" format_date="02.10.2003">
      <status>V</status>
      <number>001001025</numbner>
      <name>Schmeisser,Christof</name>
    - <details>
    -    <detail>
             <contract>00000003494</contract>
             <name>Schmeisser, Christof</name>
             <invoice_no>000000003840</invoice_no>
             <due_date>20100601</due_date>
             <amount>140,00</amount>
         </detail>
    -    <detail>
             <contract>00000003495</contract>
             <name>Schmeisser, Christof</name>
             <invoice_no>000000003841</invoice_no>
             <due_date>20100601</due_date>
             <amount>130,00</amount>
         </detail>
    - </details>
    <elements>2</elements>
    <amount_overall>270</amount_overall>
    </file>
    At the moment I download it like this:
    CALL METHOD cl_gui_frontend_services=>gui_download
            EXPORTING
              bin_filesize = l_xml_size
              filename     = filename
              filetype     = 'BIN'
    *        CONFIRM_OVERWRITE = '0'
            CHANGING
              data_tab     = l_xml_table
            EXCEPTIONS
              OTHERS       = 24.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSEIF sy-subrc = 0.
            lv_create_counter = lv_create_counter + 1.
          ENDIF.
    But I need to download it via OPEN TRANSFER CLOSE Dataset as it has to run in batch mode.
    Anyone has an idea? I am really desperate here. One idea would be to parse the single lines into a string and then create the XML file line by line as text and save it with ending XML, should work. But I don't know how!
    Thank you very much in advance,
    kind regards from Tallinn, Estonia,
    Christof!
    Edited by: Christof Schmeisser on Nov 25, 2010 7:51 PM
    I edited the heading, would be too general and missleading!

    Tipos Pools
    TYPE-POOLS: ixml.
    CLASS cl_ixml DEFINITION LOAD.
    TYPES: BEGIN OF xml_node_type,
             node   TYPE char50,
             vlnode TYPE string,
           END OF xml_node_type,
           BEGIN OF xml_line_type,
             data(256) TYPE x,
           END OF xml_line_type.
    Tabelas Internas
    DATA: ti_xml_node        TYPE TABLE OF xml_node_type.
    Variáveis TYPE REF
    *Type REF para utilizar no XML
    DATA: ixml_type             TYPE REF TO if_ixml,
          streamfactory_type    TYPE REF TO if_ixml_stream_factory,
          ostream_type          TYPE REF TO if_ixml_ostream,
          istream_type          TYPE REF TO if_ixml_istream,
          parser_type           TYPE REF TO if_ixml_parser,
          renderer_type         TYPE REF TO if_ixml_renderer,
          document_type         TYPE REF TO if_ixml_document,
          encoding_type         TYPE REF TO if_ixml_encoding,
          node_type             TYPE REF TO if_ixml_node,
          element_dtrans_type   TYPE REF TO if_ixml_element,
          element_xml_in_type   TYPE REF TO if_ixml_element,
          element_roteiros_type TYPE REF TO if_ixml_element,
          element_roteiro_type  TYPE REF TO if_ixml_element,
          element_vias_type     TYPE REF TO if_ixml_element,
          element_via_type      TYPE REF TO if_ixml_element,
          element_dummy_type    TYPE REF TO if_ixml_element,
          gw_xml_node           TYPE TABLE OF xml_node_type,
          gw_xml_node_ret       TYPE TABLE OF xml_node_type,
          gw_xml_node_err       TYPE TABLE OF xml_node_type,
          gw_xml_node_xml       TYPE TABLE OF xml_node_type,
          gw_xml_table          TYPE TABLE OF xml_line_type,
          gw_xml_table2         TYPE TABLE OF xml_line_type,
          gs_xml_node           TYPE xml_node_type,  "WA para leitura do xml
          gs_xml_node_ret       TYPE xml_node_type,  "WA para leitura do xml retorno
          gs_xml_node_err       TYPE xml_node_type,  "WA para leitura do xml erro
          gs_xml_node_xml       TYPE xml_node_type,  "WA para leitura do xml info sucesso
          gs_xml_table2         TYPE xml_line_type.  "WA para importar xml
    Variáveis do Programa
    DATA: l_value              TYPE string,
          l_rc                 TYPE i,
          l_xml_size           TYPE i,
          cod_cartaorepom      TYPE char20 VALUE '123456789',
          v_caminho_exp        TYPE string VALUE 'C:TEMP',
          v_salvaarquivo       TYPE string,
          v_nomearquivo        TYPE string,
          w_nodetext           TYPE string,
          v_roteiros           TYPE string,
          v_roteiro            TYPE string,
          v_roteiro_codigo     TYPE string,
          v_percurso_codigo    TYPE string,
          v_percurso_descricao TYPE string,
          v_cidade_origem      TYPE string,
          v_estado_origem      TYPE string,
          v_cidade_destino     TYPE string,
          v_estado_destino     TYPE string,
          v_transporte_tipo    TYPE string,
          v_cartao_taxa        TYPE string,
          v_cobra_taxa         TYPE string.
    Constants
    CONSTANTS: cc_39         TYPE string VALUE '39', " Numero 39.
               cc_dt_trans   TYPE string VALUE 'data_transfer'," document_type(name)
               cc_metodo_cod TYPE string VALUE 'metodo_codigo'," document_type(name)
               cc_xml_in     TYPE string VALUE 'xml_in'," document_type(name)
               cc_ct_tx_ativ TYPE string VALUE 'cartao_taxa_ativacao'," document_type(name)
               cc_cartao     TYPE string VALUE 'cartao', " Parâmetro Perform.
               cc_xml        TYPE string VALUE '.XML'," extenção
               cc_bin        TYPE char10 VALUE 'BIN'." filetype
    START-OF-SELECTION.
      PERFORM yf_inicia_criacao_xml USING cc_39.
      element_roteiro_type  = document_type->create_simple_element(
                     name   = cc_ct_tx_ativ
                     parent = element_xml_in_type  ).
      PERFORM yf_dummy_roteiro USING cod_cartaorepom cc_cartao.
      PERFORM yf_finaliza_xml.
      PERFORM yf_exporta_xml USING v_caminho_exp.
      PERFORM yf_convert_xml_to_itab TABLES gw_xml_node_ret
                                      USING v_salvaarquivo.
    END-OF-SELECTION.
    *&      Form  yf_inicia_criacao_xml
          text
         -->VALUE(P_0783)  text
    FORM yf_inicia_criacao_xml USING value(p_0783).
      DATA: s_encoding_type TYPE string VALUE 'ISO-8859-1'.
    Cria o ixml factory
      ixml_type = cl_ixml=>create( ).
    *Cria o objeto com modelo
      document_type = ixml_type->create_document( ).
    *Cria o cabeçalho encoding="iso-8859-1"
      encoding_type = ixml_type->create_encoding( byte_order = 0
                        character_set = s_encoding_type ).
    *Cria o root "DATA_TRANSFER"
      element_dtrans_type = document_type->create_simple_element(
                    name  = cc_dt_trans
                  parent  = document_type ).
    *Cria o node "METODO_CODIGO" e preenche com um valor passado no L_VALUE
      l_value = p_0783.
      CONDENSE l_value.
      element_dummy_type = document_type->create_simple_element(
                    name = cc_metodo_cod
                   value = l_value
                  parent = element_dtrans_type ).
    *Cria o node "XML_IN"
      element_xml_in_type   = document_type->create_simple_element(
                  name   = cc_xml_in
                  parent = element_dtrans_type  ).
    ENDFORM.                    " yf_inicia_criacao_xml
    *&      Form  yf_dummy_roteiro
          text
         -->VALUE(P_0996)  text
         -->VALUE(P_0997)  text
    FORM yf_dummy_roteiro USING value(p_0996)
                                value(p_0997).
      l_value  = p_0996.
      CONDENSE l_value.
      element_dummy_type = document_type->create_simple_element(
                    name = p_0997
                   value = l_value
                  parent = element_roteiro_type ).
    ENDFORM.                    " yf_dummy_roteiro
    *&      Form  yf_finaliza_xml
          text
    FORM yf_finaliza_xml.
    *Cria o stream factory
      streamfactory_type = ixml_type->create_stream_factory( ).
    *Conecta a internal table de XML com o stream factory
      ostream_type = streamfactory_type->create_ostream_itable( table = gw_xml_table  ).
      CALL METHOD ostream_type->set_encoding
        EXPORTING
          encoding = encoding_type.
    *Rendering the document
      renderer_type = ixml_type->create_renderer( ostream  = ostream_type
                                            document = document_type ).
      l_rc = renderer_type->render( ).
    *Salva o documento XML
      l_xml_size = ostream_type->get_num_written_raw( ).
    ENDFORM.                    " yf_finaliza_xml
    *&      Form  yf_exporta_xml
          text
         -->VALUE(P_0783)  text
    FORM yf_exporta_xml USING value(p_0783).
      CONCATENATE cod_cartaorepom
                  sy-datum
                  sy-uzeit
                  cc_xml
             INTO v_nomearquivo.
      CONCATENATE p_0783
                  v_nomearquivo
             INTO v_salvaarquivo.
      TRANSLATE v_nomearquivo TO UPPER CASE.
    *Exporta o XML
      CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
          bin_filesize = l_xml_size
          filename     = v_salvaarquivo
          filetype     = cc_bin
        CHANGING
          data_tab     = gw_xml_table
        EXCEPTIONS
          OTHERS       = 24.
      IF sy-subrc = 0.
       PERFORM yf_sapgui_progress_indicator USING cc_msg_xml_ok.
      ELSE.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " yf_exporta_xml
    *&      Form  yf_convert_xml_to_itab
          text
         -->P_GW_XML_NODE_RET  text
         -->P_FILENAME         text
    FORM yf_convert_xml_to_itab  TABLES p_gw_xml_node_ret LIKE gw_xml_node
                                USING  p_filename.
      DATA l_count.
      ixml_type = cl_ixml=>create( ).
    Now Create Stream Factory
      streamfactory_type = ixml_type->create_stream_factory( ).
      CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename   = p_filename
          filetype   = cc_bin
        IMPORTING
          filelength = l_xml_size
        CHANGING
          data_tab   = gw_xml_table2
        EXCEPTIONS
          OTHERS     = 19.
      IF sy-subrc = 0.
        istream_type = streamfactory_type->create_istream_itable( table = gw_xml_table2
                                                            size  = l_xml_size ).
        document_type = ixml_type->create_document( ).
        parser_type = ixml_type->create_parser( stream_factory = streamfactory_type
                                         istream         = istream_type
                                         document        = document_type ).
        IF parser_type->parse( ) NE 0.
          IF parser_type->num_errors( ) NE 0.
            l_count = parser_type->num_errors( ).
          ENDIF.
        ENDIF.
        CALL METHOD istream_type->close( ).
        CLEAR istream_type.
        node_type = document_type.
        PERFORM yf_get_data USING node_type.
        p_gw_xml_node_ret[] = gw_xml_node[].
        CLEAR gw_xml_node[].
      ENDIF.
    ENDFORM.                    " yf_convert_xml_to_itab
    *&      Form  yf_get_data
          text
         -->VALUE(X_NODE)  text
    FORM yf_get_data    USING value(x_node) TYPE REF TO if_ixml_node.
      DATA: indent      TYPE i.
      DATA: ptext       TYPE REF TO if_ixml_text.
      DATA: string      TYPE string.
      DATA: temp_string(100).
      CASE x_node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
          string = x_node->get_name( ).
          w_nodetext = string.
          CLEAR string.
          string = x_node->get_value( ).
          IF NOT w_nodetext IS INITIAL OR
             NOT string IS INITIAL.
            gs_xml_node-node   = w_nodetext.
            gs_xml_node-vlnode = string.
            IF NOT gs_xml_node-vlnode IS INITIAL.
              APPEND gs_xml_node TO gw_xml_node.
              CLEAR  gs_xml_node.
            ENDIF.
          ENDIF.
      ENDCASE.
    Get the next child
      x_node = x_node->get_first_child( ).
    Recurse
      WHILE NOT x_node IS INITIAL.
        PERFORM yf_get_data USING x_node.
        x_node = x_node->get_next( ).
      ENDWHILE.
    ENDFORM.                    "yf_get_data

  • Help needed in consuming BTQueryAUI query in batch mode

    Hi Friends,
    I am trying to consume BTQueryAUI in a custom function module. I have a requirement where in when i receive a external ref nbr, i need to update the status of crm service request to completed. We have already built logic to store the external nbr info in AET field on Service request and enhance inbox search to take give the results accordingly. now when i try to consume the query service with standard query parameters in batch mode..its not working..
    REPORT  ZTEST_CSOCRM.
    DATA : ob_oref           TYPE REF TO zcl_im_z_badi_inbox_search,
      C_ITEM_1O                TYPE CRMT_AUI_MAP_ITEM_TYPE VALUE 'ONEORDER',
       l_param1o_tab   TYPE crmt_name_value_pair_tab,
       is_name         type standard table of CRMT_NAME_VALUE_PAIR,
       wa_name         like line of is_name,
          l_sort_1o_tab   TYPE crmtt_aui_sorting,
           lv_result_1o  TYPE REF TO cl_crm_bol_entity_col.
    data QUERY_1O type ref to CL_CRM_BOL_QUERY_SERVICE.
    CONSTANTS:
      abap_true      TYPE abap_bool VALUE 'X',
      abap_false     TYPE abap_bool VALUE ' '.
    data: c_BTQueryAUI          TYPE crmt_ext_obj_name
                                        VALUE 'BTQueryAUI',
           c_query1o              TYPE crmt_ext_obj_name VALUE  'BTQueryAUI',
          ob_query                    TYPE REF TO
                                        cl_crm_bol_query_service,
    ob_result                   TYPE REF TO if_bol_bo_col,
    ob_core                     TYPE REF TO cl_crm_bol_core,
             lr_aui_dq        TYPE REF TO cl_crm_aui_advquery_service,
             lr_aui           type ref to cl_crm_aui_query_service.
    wa_name-name = 'ASSIGNEDTYPE'.
    wa_name-value = '0000'.
    append wa_name to is_name.
    wa_name-name = 'DATETYPE'.
    wa_name-value = '0001'.
    append wa_name to is_name.
    wa_name-name = 'MAINCATEGORY'.
    wa_name-value = 'ZBGW'.
    append wa_name to is_name.
    wa_name-name = 'SORTEDBY'.
    wa_name-value = '0000'.
    append wa_name to is_name.
    wa_name-name = 'SORTEDBY2'.
    wa_name-value = '0000'.
    append wa_name to is_name.
    wa_name-name = 'TIMEPERIOD'.
    wa_name-value = '0000'.
    append wa_name to is_name.
    wa_name-name = 'ZZFLD000006'.
    wa_name-value = '0000012345'.
    append wa_name to is_name.
    wa_name-name = 'DESCRIPTON'.
    wa_name-value = '*test*'.
    append wa_name to is_name.
    l_param1o_tab = IS_NAME.
    ob_core = cl_crm_bol_core=>get_instance( ).
            ob_core->start_up( 'ALL' ).
    TRY.
          query_1o  = cl_crm_bol_query_service=>get_instance( c_query1o ).
        CATCH: cx_crm_unsupported_object.
      ENDTRY.
    query_1o->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                                  iv_convert    = abap_false  ).
    lv_result_1o ?= query_1o->get_query_result( ).
            ob_query = cl_crm_bol_query_service=>get_instance( c_BTQueryAUI ).
      ob_query->set_query_parameters( EXPORTING it_parameters = l_param1o_tab
                                                  iv_convert    = abap_false  ).
      lv_result_1o ?= ob_query->get_query_result( ).

    Tried obtaining the output using SQL and the result is as follows:
    SQL> WITH T AS
      2  (
      3  SELECT 1 COL1 FROM DUAL
      4  UNION
      5  SELECT 2 COL1 FROM DUAL
      6  UNION
      7  SELECT 3 COL1 FROM DUAL
      8  UNION
      9  SELECT 4 COL1 FROM DUAL
    10  UNION
    11  SELECT 5 COL1 FROM DUAL
    12  UNION
    13  SELECT 8 COL1 FROM DUAL
    14  UNION
    15  SELECT 9 COL1 FROM DUAL
    16  UNION
    17  SELECT 10 COL1 FROM DUAL
    18  UNION
    19  SELECT 13 COL1 FROM DUAL
    20  UNION
    21  SELECT 14 COL1 FROM DUAL
    22  UNION
    23  SELECT 15 COL1 FROM DUAL
    24  UNION
    25  SELECT 16 COL1 FROM DUAL
    26  UNION
    27  SELECT 23 COL1 FROM DUAL
    28  UNION
    29  SELECT 24 COL1 FROM DUAL
    30  )
    31  SELECT OUTPUT FROM
    32  (
    33  SELECT DECODE(COL3,NULL,COL1, COL2)  || '-' || LEAD(DECODE(COL3,NULL,COL3, COL1)) OVER (ORDER BY DECODE(COL3,NULL,COL1, COL2)) OUTPUT  FROM
    34  (
    35  SELECT COL1, LEAD(COL1) OVER (ORDER BY COL1) COL2, LAG(COL1) OVER (ORDER BY COL1) COL3 FROM T
    36  )
    37  WHERE
    38  (COL2 - COL1 > 1 OR COL2 IS NULL OR COL3 IS NULL)
    39  )
    40  WHERE OUTPUT != '-';
    OUTPUT                                                                         
    1-5                                                                            
    8-10                                                                           
    13-16                                                                          
    23-24

  • How to Upload a file in a Batch Mode ?

    Hi, I want to upload a Comma separated value File via RFC to a BW system.
    The scenario is the following: From a Portal server i call the BAPI using JC0/JCA.
    The problem is that GUI_UPLOAD does not support a BATCH job. At least i get a error when calling the BAPI: Exception condition "NO_BATCH" raised. 
    How do i upload a file in a Batch Mode ?
    Thanks,
    Kai

    Hi Kai,
    Sorry for the delay. The delay was in trying to get to talk to the Basis team.
    Here is how we have it.
    On the message server of every instance, there will be a SAP admin id that is '<SID>ADM' or 'SAPSERVER<SID>' where SID is the system ID. We use the '<SID>ADM' user id.
    On the external NT fileserver, there has to be a user id created on the NT box with the same SAP admin id and this id on the NT box should have access rights do Read/Write.
    All of these have to be in the same domain (or different domains that have trust access to each other).
    So, there is basis,network and security groups involved.
    Once these are in place, we can have file access to the external fileserver box.
    We use logical filenames at our place (Transaction FILE).
    This makes all the file transfer locations well organized and manageable.
    Hope that answers your question regarding this.
    Regards,
    -Ramesh

  • Getting a COM error when calling MenuItemExecute in batch mode

    I support an internal document management system for our corporate contracts. Among other applications, I have one that runs nightly in batch mode to store new invoices and connect them via bookmarks to their corresponding “parent” contract files. The original program was created in 2005 with Acrobat 7 (later updated to Acrobat 8) and it worked well for several years. However, a few months ago I upgraded the system to Acrobat 9 and since then the program has not run consistently.
    The “program” actually consists of a VB application and two plug-ins. The VB application does as much work as it can with IAC and the JSO bridge, but because the files are (owner) password protected one plug-in automatically applies the necessary password using AVDocDidOpen when the VB application opens the AVDoc. The VB application then also calls the other plug-in using MenuItemExecute. The second plug-in is used to create the bookmarks between the two files by grabbing info off bookmark strings and creating the necessary actions. It also applies the password to the files.
    Here is brief outline form is how this is all structured:
    pdDocParent.Open
             pdDocInvoice.Open
                     avDocParent.Open (This triggers the first plug-in to apply the password)
                             Create bookmark strings in both files using JSO bridge
                                    MenuItemExecute (To create the bookmark action in the parent)
                                    pdDocParent.Save
                            avDocParent.Close
                            avDocInvoice.Open (This triggers the first plug-in to apply the password)
                                    MenuItemExecute (To create the bookmark action in the invoice)
                                    pdDocInvoice.Save
                            avDocInvoice.Close
                    pdDocInvoice.Close
            pdDocParent.Close
    Since the upgrade, I’m getting a COM error [The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))] on a non-consistent basis when the application tries to call MenuItemExecute. When I say “non-consistent” I mean that some days the program will process several hundred files just fine. Other days it won’t process any. Then some days it will not process the first, oh, four files but will process the next 300. Usually it runs fine when started interactively, but even then the error sometimes occurs.
    I recompiled both plug-ins and the VB app using the Acrobat 9 SDK (headers for the plug-in and the Acrobat type library for the VB app) but that didn’t make any difference. I added code to check if the MenuItem is available and it is in all cases.
    After reviewing this more, I got to thinking that perhaps a race condition was the culprit—that a string hadn’t been completely written before the second plug-in tried to create an action for it. So I added some half-second pauses along the way, but that doesn’t seem to have helped, either.
    At this point the only thing I can think of is to rewrite the application as a pure plug-in. But it’s a long and involved application and if I can get the current app to work I’d prefer to do that. I tested it with Acrobat 10.1 and encountered similar problems.
    As I said, it’s been working fine up until Acrobat 9. Does anyone know of anything that might have changed with Acrobat 9 that I haven’t considered? Is there anything else I might check? Thanks.

    Leonard,
    I'd be interested in hearing why you think that because others at Adobe have told me it's OK. Acrobat is only being called by one user at a time and we've paid for a full license.
    Thanks,
    Dick

  • Photoshop CS3 Actions Batch mode bug?

    I posted this in the Mac forum but received no responses after a couple of days, so I am trying it here.
    Photoshop CS3 Actions seem to have a bug such that when used in Automate > Batch mode it will use the name of the first file opened in the batch session for every file processed in that session. Since that name is used in Save step, this means having to deal with the "File Already Exist" dialog for every file in the batch because it is attempting to save at the designated location with the same file name. If the continue option is chosen each time, the final result is one file with the first opened file name, but with the contents of the last processed file.
    To confirm that this is a problem particular to the opening step, I have disabled all processing steps as well as the saving step by toggling them in the Actions panel. I then ran the action in batch mode on a folder containing 4 files. This resulted in 4 opened files all with the same name but different image content.
    This was with the "Override 'Open' Action Commands" checked/not checked, and the "Suppress File Open Options Dialogs"  checked/not checked. The  problem described also occurs when using a Droplet.
    By comparison, Photoshop CS exhibits the expected behavior: when an action is used in batch mode to process an entire folder of files, the name of each file is retained after opening and used after processing in the save or export step.
    The above described behavior of CS3 is a change acquired along the way to the CS3 version (I do not have the CS2 version to test). But more importantly, can someone please report if the CS4 version behaves as I described for CS3, or if it has been returned to the CS behavior?
    OS X 10.4.11
    G4 800 MHz 2 MB L3/processor 1.25 GB SDRAM
    Is this a known bug?
    Al

    Hello Miguel,
    I was going to come back to post some of my findings, one of which relates to your staement:
    "- The open command created by Photoshop 6 doesn't keep the file's name, it is a much simple open command, and so it opens the file with the own file's name."
    In my case I found that my CS version of the "same" action worked, while the  CS3 version failed, precisely because the earlier one records less detail for the open step.
    My need is to convert dozens of Quark pdf files to GIF and JPEG files for the web. What I found after several days of testing is that it is best to record the opening step in CS3 NOT using a pdf file, so that the "Open As Generic Pdf with 'Name____' " would not be coded into the opening step. Instead I recorded the whole action using a PSD file. Then I can proceed to run it in Batch mode choosing a folder of Quark pdf files as the source location with "Override 'Open' Action Commands" checked, and the "Suppress File Open Options Dialogs"  checked, and it opens all the pdf files just fine in some background process, not getting stuck in the details of the file name, and proceeds to cary out the flattening, saving, and closing steps to my chosen target location and uses the finder file name of each pdf files in the source folder to save a filename.ext in the Target folder.
    Contrary to what I stated in my original post, "Override 'Open' Action Commands" checked/not checked does indeed make a difference. If it is not checked, the files do open in batch mode, but the other steps are not performed. There is much more about this that I would like to know, and this may not be a general solution for all types of files that a user may wish to process in batch mode, but it works for my case. The main trick is to use as simple an opening step as possible when recording the action, and then letting Photoshop use whatever background process it requires to open a particular file type. I tested this by manually saving a pdf file to each of the twenty some odd formats available in the save as dialog to a Source folder, and then proceeded to batch process that folder with the action described above, and it worked for all except one.
    So while there may not be a bug involved in this problem, there certainly is a lack of documentation about how the "improvements" in the opening step in newer versions of Photoshop affect using Actions in Batch mode.
    Please comment if you can further explain any of the reported results. In particular, what is the situation in CS4?
    Thanks,
    Al

  • RE: Reporting after many forte tasks run in batch mode?

    Actually, if you're looking for MAKEAPPDISTRIB (I assume that's how you
    create distributable) you can see if the command was succesfull or not.
    <<deployrep.js>> This Jscript will look for this string and it will
    generate a report based on the next line in the log file.
    The script assumes you have an environment variable (DESCARTES_ROOT) that
    points to a folder (let's say "D:\TEST"). Under that folder you have a log
    folder ("d:\test\log") which holds the deploy.log log file. You can easily
    change the script to reflect your systems settings.
    The generated report looks like that : <<deployrep.txt>>
    Norocel Popa
    Forte SysEng
    (519)746-8110 x 2292
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Tuesday, March 16, 1999 11:58 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Reporting after many forte tasks run in batch mode ?
    Hi,
    I would like to know if overnight builds went okay, and therefore need to
    parse the log(s).
    The issue is that I don't have a proper string to look for (i.e. for
    grep).
    If I consider 'ERROR", then the following message won't be understandable.
    There might a way to cheat with the indentation (i.e. the lines with only
    two first blank chars)..
    Has anyone experimented such a need ?
    J-Paul Gabrielli
    DTS
    SYSTEM ERROR: Service object MySuperApplicationServer.MySuperMgrSO has
    not been partitioned. Therefore, you cannot move it to an existing
    partition.
    Class: qqsp_UsageException
    Error #: [1602, 606]
    Detected at: qqcf_StandardConfig::MoveServiceObject at 3
    Error Time: Tue Mar 16 17:39:26
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1,
    taskId =
    [B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in application
    "fscript", pid 22713 on node rambo in environment SuperEnv.

    Hi,
    To trap error message from Forte log, I usually do this
    egrep '(EXCEPTION|Exception|exception|ERROR|Error|error)' filename
    This takes a regular expression to 'egrep' all occurrences of "exception" or
    "error" not matter they are in upper case or lower case.
    Hope this help.
    Regards,
    Peter Sham.
    -----Original Message-----
    From: [email protected] [SMTP:[email protected]]
    Sent: Wednesday, March 17, 1999 12:58 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Reporting after many forte tasks run in
    batch mode ?
    Hi,
    I would like to know if overnight builds went okay, and
    therefore need to parse the log(s).
    The issue is that I don't have a proper string to look for
    (i.e. for grep).
    If I consider 'ERROR", then the following message won't be
    understandable.
    There might a way to cheat with the indentation (i.e. the
    lines with only two first blank chars)..
    Has anyone experimented such a need ?
    J-Paul Gabrielli
    DTS
    SYSTEM ERROR: Service object
    MySuperApplicationServer.MySuperMgrSO has
    not been partitioned. Therefore, you cannot move it to an
    existing partition.
    Class: qqsp_UsageException
    Error #: [1602, 606]
    Detected at: qqcf_StandardConfig::MoveServiceObject at 3
    Error Time: Tue Mar 16 17:39:26
    Exception occurred (locally) on partition
    "Fscript_cl9_Client",
    (partitionId =
    B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1, taskId =
    [B84E6180-D639-11D2-82F2-1863030AAA77:0x244:0x1.1]) in
    application
    "fscript", pid 22713 on node rambo in environment
    SuperEnv.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:<a href=
    "http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

  • How to run a 10g report in quiet\batch mode

    Good Afternoon,
    Please advise if there is a way to run a 10g report from command line.
    We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
    Thank you,
    Dmitri

    So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
    Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
    return 'D:\ORADEV10G\BIN\RWRUN.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' batch=yes paramform=no destype=file'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
    1. Use rwclient to submit a report request
    return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=localfile'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';2. Use rwservlet to submit a report request
    return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=localfile'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
    return 'http://server2:7777/reports/rwservlet?'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=cache'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';

  • How to run a 10g report in batch mode.

    Good Afternoon,
    Please advise if there is a way to run a 10g report from command line.
    We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
    Thank you,
    Dmitri

    For those of you interested in following this refer to the same thread in the Reports Forum:
    How to run a 10g report in quiet\batch mode

  • RE: Processing Logged messages in batch mode ?

    Paul,
    One way to findout the log file is to inspect your
    <CentralServer>.log. It should have a line something like..
    Redirecting output to <someDirectory>/forte_ex_26564.log.
    That is the file the the current ftexec is writing to.
    This has worked fine for me.
    Another way is to sort the files by date, and look at the latest
    ones.
    ...I'd love to hear about a better way to do this.
    Ajith Kallambella. M
    Forte Systems Engineer
    International Business Corporation.
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Monday, March 01, 1999 9:06 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Processing Logged messages in batch mode ?
    Hi,
    When I launch partitions, they display a whole bunch of 'useful' messages.
    (maybe using 'task.logmgr.putline')
    I'm afraid these traces go directly in the launcher's log file under
    $FORTE_ROOT/log
    As I get control only when the ftexec ends for the next instruction to be
    interpreted,
    how can I figure out which of these log files relates to the ftexec I just
    got executed ?
    (example: "forte_ex_3613.log")
    I found '/output' for node managers, but for single ftexec(s) ?
    (thinking also about re-used ftexec(s))
    Thanks in advance,
    j-paul gabrielli
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Paul,
    One way to findout the log file is to inspect your
    <CentralServer>.log. It should have a line something like..
    Redirecting output to <someDirectory>/forte_ex_26564.log.
    That is the file the the current ftexec is writing to.
    This has worked fine for me.
    Another way is to sort the files by date, and look at the latest
    ones.
    ...I'd love to hear about a better way to do this.
    Ajith Kallambella. M
    Forte Systems Engineer
    International Business Corporation.
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Monday, March 01, 1999 9:06 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Processing Logged messages in batch mode ?
    Hi,
    When I launch partitions, they display a whole bunch of 'useful' messages.
    (maybe using 'task.logmgr.putline')
    I'm afraid these traces go directly in the launcher's log file under
    $FORTE_ROOT/log
    As I get control only when the ftexec ends for the next instruction to be
    interpreted,
    how can I figure out which of these log files relates to the ftexec I just
    got executed ?
    (example: "forte_ex_3613.log")
    I found '/output' for node managers, but for single ftexec(s) ?
    (thinking also about re-used ftexec(s))
    Thanks in advance,
    j-paul gabrielli
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • FW: Processing Logged messages in batch mode ?

    If you rename your partitions' log files before running the app and do the
    renaming according to each partitions' purpose or partition number, then
    after running the app, just go to the approprate log file. You can do the
    renaming using system agents so that it is not a manual process.
    Essentially, you know in advance where the output goes.
    -Ravi
    -----Original Message-----
    From: J-Paul GABRIELLI [SMTP:[email protected]]
    Sent: Monday, March 01, 1999 11:29 AM
    To: 'Kalidindi, Ravi CWT-MSP'
    Subject: RE: Processing Logged messages in batch mode ?
    Sorry, I was looking for a batch way, when the partition is dead (i.E.
    can't monitor it nor view it in escript)
    No gui :-)
    j-p
    -----Message d'origine-----
    De: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
    Date: lundi 1 mars 1999 17:51
    A: 'Kallambella, Ajith'; 'J-Paul GABRIELLI'; 'Forte'
    Objet: RE: Processing Logged messages in batch mode ?
    In case of installed applications or running in distributed mode, you can
    use econsole to choose the appropriate active partition and view the log
    file for it. The "log file" window also displays the name of the
    particular
    log file. In case of installed applications, you can also rename the log
    file for your partitions.
    Hope that helps
    -Ravi Kalidindi
    Born Info Svcs Group
    -----Original Message-----
    From: Kallambella, Ajith [SMTP:[email protected]]
    Sent: Monday, March 01, 1999 9:47 AM
    To: 'J-Paul GABRIELLI'; 'Forte'
    Subject: RE: Processing Logged messages in batch mode ?
    Paul,
    One way to findout the log file is to inspect your
    <CentralServer>.log. It should have a line something like..
    Redirecting output to <someDirectory>/forte_ex_26564.log.
    That is the file the the current ftexec is writing to.
    This has worked fine for me.
    Another way is to sort the files by date, and look at the latest
    ones.
    ...I'd love to hear about a better way to do this.
    Ajith Kallambella. M
    Forte Systems Engineer
    International Business Corporation.
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Monday, March 01, 1999 9:06 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Processing Logged messages in batch mode ?
    Hi,
    When I launch partitions, they display a whole bunch of 'useful'messages.
    (maybe using 'task.logmgr.putline')
    I'm afraid these traces go directly in the launcher's log file under
    $FORTE_ROOT/log
    As I get control only when the ftexec ends for the next instruction tobe
    interpreted,
    how can I figure out which of these log files relates to the ftexec Ijust
    got executed ?
    (example: "forte_ex_3613.log")
    I found '/output' for node managers, but for single ftexec(s) ?
    (thinking also about re-used ftexec(s))
    Thanks in advance,
    j-paul gabrielli
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    If you rename your partitions' log files before running the app and do the
    renaming according to each partitions' purpose or partition number, then
    after running the app, just go to the approprate log file. You can do the
    renaming using system agents so that it is not a manual process.
    Essentially, you know in advance where the output goes.
    -Ravi
    -----Original Message-----
    From: J-Paul GABRIELLI [SMTP:[email protected]]
    Sent: Monday, March 01, 1999 11:29 AM
    To: 'Kalidindi, Ravi CWT-MSP'
    Subject: RE: Processing Logged messages in batch mode ?
    Sorry, I was looking for a batch way, when the partition is dead (i.E.
    can't monitor it nor view it in escript)
    No gui :-)
    j-p
    -----Message d'origine-----
    De: Kalidindi, Ravi CWT-MSP [SMTP:[email protected]]
    Date: lundi 1 mars 1999 17:51
    A: 'Kallambella, Ajith'; 'J-Paul GABRIELLI'; 'Forte'
    Objet: RE: Processing Logged messages in batch mode ?
    In case of installed applications or running in distributed mode, you can
    use econsole to choose the appropriate active partition and view the log
    file for it. The "log file" window also displays the name of the
    particular
    log file. In case of installed applications, you can also rename the log
    file for your partitions.
    Hope that helps
    -Ravi Kalidindi
    Born Info Svcs Group
    -----Original Message-----
    From: Kallambella, Ajith [SMTP:[email protected]]
    Sent: Monday, March 01, 1999 9:47 AM
    To: 'J-Paul GABRIELLI'; 'Forte'
    Subject: RE: Processing Logged messages in batch mode ?
    Paul,
    One way to findout the log file is to inspect your
    <CentralServer>.log. It should have a line something like..
    Redirecting output to <someDirectory>/forte_ex_26564.log.
    That is the file the the current ftexec is writing to.
    This has worked fine for me.
    Another way is to sort the files by date, and look at the latest
    ones.
    ...I'd love to hear about a better way to do this.
    Ajith Kallambella. M
    Forte Systems Engineer
    International Business Corporation.
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Monday, March 01, 1999 9:06 AM
    To: Forte-Users (Adresse de messagerie)
    Subject: Processing Logged messages in batch mode ?
    Hi,
    When I launch partitions, they display a whole bunch of 'useful'messages.
    (maybe using 'task.logmgr.putline')
    I'm afraid these traces go directly in the launcher's log file under
    $FORTE_ROOT/log
    As I get control only when the ftexec ends for the next instruction tobe
    interpreted,
    how can I figure out which of these log files relates to the ftexec Ijust
    got executed ?
    (example: "forte_ex_3613.log")
    I found '/output' for node managers, but for single ftexec(s) ?
    (thinking also about re-used ftexec(s))
    Thanks in advance,
    j-paul gabrielli
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Maybe you are looking for

  • Connected usb driver is not detected in window 8.1

    hey .....  HP 250 G3 notebook connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

  • Mid Year GO-Live Payroll India.

    Hi Friends, WHat r the Wage Types we need to upload for Legacy Period in the System. In T558 -C iam uploading the following wage types Net pay EPF  Contribution ESI Contribution Income Tax But iam afraid if we don't upload Earnings , Gross salary , t

  • How can i save copies of mail messages on pc?

    Whenever possible I work at home on my Imac, using OSX 10.5.1. My work is university related, and am expected to save copies of all sent and received email on the university pc. I deal with hundreds of messages each week, and need to find a way of wo

  • Urgent: Issue with variable exit

    Hi All, We are having a requirement where in we need to populate the value of calday as the first day of the month that the user selects in the variable. For that, this is what i did: 1. Created a variable for 0CALDAY as ZDAT1 and made it as "Process

  • JMenuBar display quirks with some window managers on Linux with Java 6

    When I run this code on Windows with Java 5 or Java 6, it works fine. When on Linux with Java 5, it works fine. When on Linux with Java 6 in KDE, it works fine. When on Linux with Java 6 with twm or e17, the JMenu shows when I click on the JMenuBar,