S_TABU_LIN from multiple roles to single user

Hi everybody
There is such situation:
We are restricting the values of infoobject using S_TABU_LIN
Everything is working fine if the user has authorization assigned only
by one role.
If the user has more then one role assigned then user has only values
authorized that are included in the first role. All authorizations from
other roles are not available
For example:
We have authorizations in 3 roles
Role1
Activity 03 ACTVT
Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
Org. crit. attribute 1 * ORG_FIELD1
Org. crit. attribute 2 04 ORG_FIELD2
Org. crit. attribute 3 * ORG_FIELD3
Org. crit. attribute 4 * ORG_FIELD4
Org. crit. attribute 5 * ORG_FIELD5
Org. crit. attribute 6 * ORG_FIELD6
Org. crit. attribute 7 * ORG_FIELD7
Org. crit. attribute 8 * ORG_FIELD8
Role2
Activity 03 ACTVT
Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
Org. crit. attribute 1 * ORG_FIELD1
Org. crit. attribute 2 06 ORG_FIELD2
Org. crit. attribute 3 * ORG_FIELD3
Org. crit. attribute 4 * ORG_FIELD4
Org. crit. attribute 5 * ORG_FIELD5
Org. crit. attribute 6 * ORG_FIELD6
Org. crit. attribute 7 * ORG_FIELD7
Org. crit. attribute 8 * ORG_FIELD8
Role3
Activity 03 ACTVT
Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
Org. crit. attribute 1 * ORG_FIELD1
Org. crit. attribute 2 08 ORG_FIELD2
Org. crit. attribute 3 * ORG_FIELD3
Org. crit. attribute 4 * ORG_FIELD4
Org. crit. attribute 5 * ORG_FIELD5
Org. crit. attribute 6 * ORG_FIELD6
Org. crit. attribute 7 * ORG_FIELD7
Org. crit. attribute 8 * ORG_FIELD8
All of the roles are assigned to single user
The problem is that user can get only that values from /BIC/ZMINISTRY
that are authorized in role1
Values authorized in role2 and role3 are not available.
What could be a problem???

Are you using BI7 as authorization?
please check the link below regarding combining authorizations for BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/46/98cd87f37d19ace10000000a11466f/content.htm

Similar Messages

  • Remove transaction codes from multiple roles at a time

    Hello,
    how to remove transaction codes from multiple roles at at time?
    Thank you in Advance.

    Hi Vanita,
             Why do you want to remove a t-code from all the roles. Are you no longer going to use the t-code. If this is the case then you can lock the transaction code in T-code SM01 so that no one can use it. But this would effect other users as well, it should only be locked if no one should use the particular T-code.
    Another alternative is to write a program to remove the particular T-Code from the table AGR_TCODES where the relation ship between the role and t-code is stored.
    Thanks.

  • How can i import the data from multiple sources into single rpd in obiee11g

    how can i import the data from multiple sources into single rpd in obiee11g

    Hi,
    to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
    tnx

  • S_TABU_LIN in multiple roles

    Hi everybody
    There is such situation:
    We are restricting the values of infoobject using S_TABU_LIN
    Everything is working fine if the user has authorization assigned only
    by one role.
    If the user has more then one role assigned then user has only values
    authorized that are included in the first role. All authorizations from
    other roles are not available
    For example:
    We have authorizations in 3 roles
    Role1
    Activity 03 ACTVT
    Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
    Org. crit. attribute 1 * ORG_FIELD1
    Org. crit. attribute 2 04 ORG_FIELD2
    Org. crit. attribute 3 * ORG_FIELD3
    Org. crit. attribute 4 * ORG_FIELD4
    Org. crit. attribute 5 * ORG_FIELD5
    Org. crit. attribute 6 * ORG_FIELD6
    Org. crit. attribute 7 * ORG_FIELD7
    Org. crit. attribute 8 * ORG_FIELD8
    Role2
    Activity 03 ACTVT
    Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
    Org. crit. attribute 1 * ORG_FIELD1
    Org. crit. attribute 2 06 ORG_FIELD2
    Org. crit. attribute 3 * ORG_FIELD3
    Org. crit. attribute 4 * ORG_FIELD4
    Org. crit. attribute 5 * ORG_FIELD5
    Org. crit. attribute 6 * ORG_FIELD6
    Org. crit. attribute 7 * ORG_FIELD7
    Org. crit. attribute 8 * ORG_FIELD8
    Role3
    Activity 03 ACTVT
    Organization criterion for key /BIC/ZMINISTRY ORG_CRIT
    Org. crit. attribute 1 * ORG_FIELD1
    Org. crit. attribute 2 08 ORG_FIELD2
    Org. crit. attribute 3 * ORG_FIELD3
    Org. crit. attribute 4 * ORG_FIELD4
    Org. crit. attribute 5 * ORG_FIELD5
    Org. crit. attribute 6 * ORG_FIELD6
    Org. crit. attribute 7 * ORG_FIELD7
    Org. crit. attribute 8 * ORG_FIELD8
    All of the roles are assigned to single user
    The problem is that user can get only that values from /BIC/ZMINISTRY
    that are authorized in role1
    Values authorized in role2 and role3 are not available.
    What could be a problem???

    Hi. I do not need a composite role. There are created about 70 single roles. One for each business division. If the user have assigned only one role (works with one divison), everyhing is fine. But if the user have to work with several divisions, there is a need to assign multiple roles. The responsibilities for the each user change all the time so the roles that are assigned to him change too.

  • Multiple Logins of single user

    How do we prevent a single user from multiple logins on IDM.
    If the user has already logged-in, IDM should prevent the same user when tries to login again.
    Thanks.

    This is really difficult to implement. The app server takes care of most of this session behaviour and we can have mulitple IDM instances in a setup which makes this really difficult.
    The other thing is how would you detect a second login? Does the second login come from the same IP or different IP? There are possible problems with all these scenarios.
    It is an oustanding enhancement to give you this option but it will not come soon.
    WilfredS

  • How to Restore from Time Machine in Single-user mode?

    Hi there, I am trying to fix a Macbook Pro that has had its /private folder trashed and emptied. Obviously it won't boot unless you you boot in to Single User mode and I'm wondering if its possible to do a Time Machine restore from the terminal, I would need the 2nd more recent Time Machine image which is sitting on a Firewire HDD.
    I was going to just see if I could find the orignal OSX install disk and just do a fresh install of the OS which I don't mind doing (since everything important is backed up in Dropbox), but I can't seem to find the CD anywhere nearby, so the Time Machine option would be much preferred.
    Any help would be greatly appreciated.

    Not sure if this is related enough, but I just wrestled trying to restore from time machine too, trying to reinstall 10.5.8 after putting a new HD in my MBP, 2006 vintage.
    That took sooooo long to get back to where I was before swapping disks; what did the trick was ordering a free copy of Snow Leopard install disk (free due to Apple trying to push people from idisk to icloud) which was rushed FedEx (yay) and which allowed me to access Time Machine where my ancient original OSX install disk had not.
    And all it took was 2 weeks of cursing!

  • Log messages from multiple instances in single file.

    Hi!
    I have a requirement that i need to log messages from muliple instances of the same object in a file. The new file will be created every day. Likewise, multiple objects might have various instances each.
    One class
    ->multiple instances
    -> log message stored in single file.
    Note :
    I am using the Message driven bean. I need to log from the bean class. JDK 1.3
    If u could help me out that would be great.

    As long as they are all from the same OS program (a single Java VM), that's OK - you can use Log4j, and use a rotating file logger.
    If you point two different virtual machine processes at the same file, one may have it open when the other is trying to rotate it, and your rotation may fail (at best) and/or you may lose the old log (the worst case).
    If you need to collect log messages from multiple processes (or even multiple machines), use a syslog-based logger (Log4j has a SyslogAppender) or use Log4j's SocketAppender to write to a log4j-builtin log listener (SocketNode).

  • Open Hub - Data from multiple sources to single target

    Hello,
    I am using Open Hub to send the data from SAP BI to Flat files. I have a requirement where I want to create a single destination from multiple sources. In other words in BI we have different tables for attributes and text. I would like to combine the data from attributes  and text into a single file. For eg. I want to have material attributes and text in the same single file as output.
    Is this possible in Open Hub? If yes could you please help me to understand the process.
    Thanks,
    KK

    Hi,
    1. Create the Info Spoke and activate it
    2. Change it and go to transformation
    3. Check the box InfoSpoke with Transf. Using BAdI
    4. You are asked if you want to generate the spoke. Say yes & Simply set some texts and activate here, then return.
    5. You can now change the target structure. Simply create a Z structure with all the attributs & text field in it in the SE11 and enter it here.
    6. Double click on BAdI implementation & then double click again on "TRANSFORM" method of the implementation. It will take you to method  
    "IF_EX_OPENHUB_TRANSFORM~TRANSFORM"
    7. Write a code to select & fill the text field & map other filed with the attribute fields.
    Example:
    ZEMPLOYEE_ATTR_STRU - Target Structure for InfoSpoke EMPLOYEE_ATTR
    EMPLOYEE     /BI0/OIEMPLOYEE     NUMC     8     0     Employee
    DATETO     /BI0/OIDATETO     DATS     8     0     Valid to
    DATEFROM     /BI0/OIDATEFROM     DATS     8     0     Valid from
    COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company code
    CO_MST_AR     /BI0/OICO_MST_AR     CHAR     4     0     Controlling Area of Master Cost Center
    HRPOSITION     /BI0/OIHRPOSITION     NUMC     8     0     Position
    MAST_CCTR     /BI0/OIMAST_CCTR     CHAR     10     0     Master Cost Center
    TXTMD     RSTXTMD     CHAR     40     0     Medium description
    Note: Text and attribute are in same structure.

  • Transform data from multiple sources to single target in bpel 10.13.1.0

    Hi,
    I need to transform data from mulitple sources to single target schema.
    Please any one can give some idea.
    Regards
    janardhan

    We are gone a other way merge multiple information into one target.
    First we have created a wrapper variable with the structure of the target variable that we want use in the transformation.
    With a assign element we filled the wrapper variable with information from the inputvariable of the bpel process and some addtional information.
    Then we called in the transformation the wrapper variable as source and the target variable as target.
    We have used that way in some bpel process and it works for us.
    Within Oracle SOA Suite 11g, there is the mediator component that does simply routing
    and transformation functionality within a composite (SCA).
    That's all, I hope that help.
    Michael

  • Cloning EBS from multiuser environment to single user enviroment

    Hi Hussein Sawwan,
    I am creating a new clone for my EBS R12.13 Production system to be used as a test system.
    My Production system is multiuser (meaning there is a user that owns the database tier and another user that owns the application tier).
    I want my test server to have only a single user (oracle) that will own both tiers. How can I make it possible?
    Should I just give all the rights on the copied files (db and apps) on the target server to the single oracle user ?

    Should I just give all the rights on the copied files (db and apps) on the target server to the single oracle user ?
    Correct, you need to change the ownership of the db/apps tier node files from the OS level to oracle user then run postclone on the database/application tier node as oracle user.
    Remember, when one OS user you will need to source the correct env file each time you want to maintain a tier (i.e. source db env file for the database tier tasks/activities and source the apps env file for the application tier tasks/activities).
    Thanks,
    Hussein

  • Transforming from multiple node to single node

    Hi,
    I new to BPEL trying to transform data from two different multiple nodes to single node of complex type.
    For Eg where 'req1' and 'req2' are multiple nodes in request:
    Request::
    <req1>
    <a1/>
    </req1>
    <req2>
    <b1/>
    </req2>
    Response::
    <c>
    <ca1>
    <cb2>
    </c>
    Please can anyone help me in getting the solution.
    Hope the pseudo-logic is clear!!!
    Edited by: c devi on Oct 18, 2011 7:12 AM
    Edited by: c devi on Oct 18, 2011 7:12 AM

    Hi',
    You can try this,
    <xsl:template match="/">
    <client:processResponse>
    <xsl:for-each select="$Var2.payload/client:process">
    <client:result>
    <xsl:value-of select="client:input"/>
    </client:result>
    </xsl:for-each>
    <xsl:for-each select="/client:process">
    <client:result>
    <xsl:value-of select="client:input"/>
    </client:result>
    </xsl:for-each>
    </client:processResponse>
    </xsl:template>
    Source:
    <req1>
    <a1/>
    </req1>
    <req2>
    <b1/>
    </req2>
    Target
    <c>
    <c1/>
    </c>
    You can do like this,
    Inside the Transform first put the for-each over the target variable, i.e. just above c1, then right click on the for-each > add XSL node > 'Clone' for-each.
    This will create the source one more time i.e. you will have now 2 targets of the same type,
    Like this.
    Target
    <c>
    <c1/>
    </c>
    <c>
    <c1/>
    </c>
    now join the wires from source to target for both of them, now right click on the transform (in the center) and do Test, this will give you the output.
    -Yatan

  • Multiple members for single user variable???

    Hi,
    Can I select multiple members or a hierarchy for a single user variable?
    My requirement is to use a dimension which consist of more than 100 members but the user will not enter data for 100 members
    at the same time so I want to give user an option to select the members for which he wants to enter data.
    I was thinking of using user variable but it is allowing me to select only one member for user variable created for that dimension,
    that means if he has to enter data for 10 members he has to change that variable 10 times or I have to use 10 different user variable for that dimension.
    what if any user wants 20 members, at that time I have only 10 user variables.
    Please help..
    Thanks in advance..

    Hi,
    Can I select multiple members or a hierarchy for a single user variable?Are the required members descendants of any particular member(hierarchy )?
    If so, you can use IDescendants<user variable> in the form's page. And you can also use dynamic user variable option.
    Regards
    -Samrat Mane
    Edited by: 918547 on Aug 22, 2012 4:54 PM

  • Boot Snow Leopard from Thumb Drive in Single User Mode on Macbook Air

    I'm trying to boot from a thumb drive that I transferred the Snow Leopard .dmg on. My macbook air only lets me get into single user mode. Every time I try to boot or enter safe mode or regular mode, the Macbook Air shuts down.

    I do have the installation media on my usb flash drive. I'm sure it's leopard, and the problem is that I cannot get passed the apple logo on boot. The laptop turns off after trying to finish the boot for twenty seconds. However, I can get into single user mode. I just can't seem to install the media in single user mode due to my lack of know how.

  • What happens if we assign multiple roles to one user

    Hi Experts,
    what is the outcome of the scenerio where multiple roles are assigned to one user in MDM
    example : role A has execute command for field X and another role B has read only command for the same field X, what happens if both the roles are assignes to user John?
    Thanks in advance
    Sharma.

    hello Abhishake,
    Thanks for the reply,
    so does that mean the user will have the execute role even though the second role was read only?
    Thanks,
    sharma

  • Can I reinstal from installation CD in Single User / secure mode?

    Hi,
    All of a sudden my MacBookPro can't boot. It gets stuck on blue screen just before login or freezes at the login window. I have tried Safe mode (shift during login), I have reset the pram and power.
    I cannot boot from the installation dvd either: it gets stuck at the very same spot: blue screen just before login. I have tried D during login, C and Option and manually select the dvd drive. I also have tried to use an external dvd drive with the installation disk in it, with the exact same results as above.
    The only thing that seems to be working is logging holding Command+S in single user mode. I have tried the fsck, mount -uw, mount -a. nothing seems to be helping.
    My questions are:
    1- with my installation disk ready in the laptop, is there a way to reinstall it from single user mode, using some specific commands
    2- Any other clues of what else I can try?
    I should add that my Macboob was never faulty. I've had it since july 2006 and have always been 100% satisfied... but I was supposed to sell it next week (I ordered the newest model), so this is a rather bad timing ;-(
    Any help appreciated.

    UCLA_Bruin wrote:
    Hi,
    All of a sudden my MacBookPro can't boot. It gets stuck on blue screen just before login or freezes at the login window. I have tried Safe mode (shift during login), I have reset the pram and power.
    I cannot boot from the installation dvd either: it gets stuck at the very same spot: blue screen just before login. I have tried D during login, C and Option and manually select the dvd drive. I also have tried to use an external dvd drive with the installation disk in it, with the exact same results as above.
    The only thing that seems to be working is logging holding Command+S in single user mode. I have tried the fsck, mount -uw, mount -a. nothing seems to be helping.
    My questions are:
    1- with my installation disk ready in the laptop, is there a way to reinstall it from single user mode, using some specific commands
    No.
    2- Any other clues of what else I can try?
    sounds like a hardware problem. take it in for repairs.

Maybe you are looking for