S12 Windows 7 Install -- Audio Button problems (Kalvin Klein?)

Received my s12 a little over a week ago, and after adding another gig of ram, I decided to install W7 just to see how it would run.
Long story short, it ran very satisfactory after some tweaking, and I decided to go with the solo install, and just ditched xp altogether.
Everything works just fine, however the audio buttons don't work.....neither the hard buttons, or using the Fn + left/right arrows
I could swear that it worked properly for the first day, but I must be mistaken.
What's strange is that when attempting to use, I will get the OSD popup, indicating that it's muted, or when attempting to adjust up and down, it will only move down one notch (from 100%), however doesn't actually change the volume.
I ran into Kalvin Klein's post about the realtek drivers, and after much slow downloading from the lenovo site, I installed them (178mb audio drivers is borderline ridiculous lol)
sadly the situation is the same, and I was hoping that I'm just missing something stupid, or there is something I may be able to do.
I don't particularly care, but it's nice to be able to quickly turn the volume down or mute it if I'm somewhere that doesn't care for loud sounds abruptly coming out of my comp.
Suggestions? Or am I just out of luck for the time being?
Solved!
Go to Solution.

Hi welcome...
if this Lenovo Energy Management Driver (Includes the OSD) didnt work properly the official for S10-2 W7...
EM Vs. 4.3.1.0 http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_1837.html
try this Lenovo Energy Management Driver Version that i used a half year since beta.RC ...
install this as admin and vista compatible...(origin from ideapad Y330
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_305.html
regards KK
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

Flash CS3 Play/Stop audio button problem

I made a play/stop audio button with this youtube tutorial (youtube.com/watch?v=XU6oMEFUFF8) but after the sound is finished I want the play button to show up agian.
Here is the actionscript:
import flash.events.MouseEvent;
play_btn.addEventListener(MouseEvent.CLICK,clickha ndler);
stop_btn.addEventListener(MouseEvent.CLICK,clickha ndler);
function clickhandler(event:MouseEvent):void{
swapChildren(play_btn,stop_btn);
what code should I add to my current code?
I also can send you the Fla.

You should consider using the Sound class. Here's a quick overview of it:
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7d21.html
You'll be able to add event listeners to the sound to know when it completes so you can execute more code, such as swapping the play and stop button. There is an example in that overview of listening for the SOUND_COMPLETE event (e.g. channel.addEventListener(Event.SOUND_COMPLETE, onPlaybackComplete);). It should contain everything you need.
A basic example of what you'll end up with (there's many ways to do it) might look something like this:
// just set up and wait for click
var isPlaying:Boolean = false;
var mySound:Sound = new MySoundInLibrary();
var myChannel:SoundChannel = new SoundChannel();
myChannel.addEventListener(Event.SOUND_COMPLETE, onPlaybackComplete);
// buttons
play_btn.addEventListener(MouseEvent.CLICK,clickhandler);
stop_btn.addEventListener(MouseEvent.CLICK,clickhandler);
function clickhandler(event:MouseEvent):void
          swapChildren(play_btn, stop_btn);
          if (isPlaying)
                    isPlaying = false;
                    myChannel.stop();
          else
                    isPlaying = true;
                    myChannel = mySound.play();
function onPlaybackComplete(e:Event):void
          isPlaying = false;
          swapChildren(play_btn, stop_btn);
The basic idea is keeping a flag if the audio is currently playing. If it isn't then assign the sound to a channel and play it while setting the flag (isPlaying) to true. If it's already playing, set the flag to false and stop playing the audio.
The swapChildren is run in the onPlaybackComplete() method so when the audio completes the play button is swapped back in front.
Rather than swapping the children I'd urge you to toggle the .visible property instead. It's easy to run commands in the wrong order and get desynched on depth.

Windows Vista Audio Driver Problem

My Windows Vista Drivers that I got for my MacBook Pro from the installation disk have bad audio drivers. The sound on the speakers is too low, and the microphone won't even work. When I talk into the microphone while under Sound Properties in the Recording tab, it shows that the microphone is picking up sound. However, in Ventrilo, and Windows Sound Recorder, there is no sound from my microphone.
I'm using Bootcamp 2.1. When will this problem be fixed? Will Apple release a new bootcamp version to fix this problem?? This is very important to me.
If anyone has fixed this problem, please tell me how you did it.
BTW, the audio device is called "Cirrus Logic CS4206A (AB75)"

Welcome. Make yourself at home.
http://discussions.apple.com/thread.jspa?threadID=2037093&tstart=30

Sat P10 Digital Audio/Buttons Problem.

My new Toshiba (Sat P10-873) laptop has buttons on the front of it for playing digital audio and CD's. I use the mode button to switch between audio CD and the music CD, the problem being then when I switch to digital audio, it opens up media player and plays the default "David Byrne" track, rather than my playlist. According to the manual it should play the last opoened playlist but this for some reason does not work. Every time i close media player and then press the play button, it loads media player and begins playing David Byrne. Any suggestions on how I could fix this? Do i have to put my playlist in a certain location? or the audio itself? Do I need to set an option some where? Thanks.

Well, I had only had the PC about half an hour at the time i was trying to do this so obviously no updates and no changes made at this time to the system.
I have however solved the problem myself so just incase anybody else needs to know:
The answer really was rather simple, for some reason, media player was saving my playlists under the "My Documents" folder of "Owner" rather than in my "My Documents" folder. I copied the playlist file from there and into my "My Music" folder and voila, everytime I switch to digital mode, it loads my playlist. Hope that made sense. Thanks for the help.

TeamSpeak2RC installed - Audio Output problems

Hello, I recently installed TS2, and it installed fine, but I cannot get my Microphone to work, every time I load my Audio Options for the system, the system keeps resetting it back to my HDA Graphics Card, it doesn't keep my internal sound card as the default, am I missing something possibly? I found a few solutions on the forums here, but they didn't make any difference, I'm back to the drawing board again.. Thanks in advance !!

HI and Welcome to Apple Discussions...
Try deleting these files.
com.apple.audio.DeviceSettings.plist
com..apple.audio.SystemSettings.plist
MacintoshHD/Library/Preferences/Audio.
Move those files to the Trash. Restart your Mac.
Carolyn

"Windows iTunes Audio Sync Problem"

any idea when apple will be fixing this problem that has been going on for months now?
the majority of computers are PCs. The majority of iTunes users are on PCs, fix this for the majority of your users.
movie sound should be synced with the movie. when we talk our lips move as the words come out, it should be the same in a movie viewed with iTunes.

after perusing these forums, i see this problem has been going on for over a year now. i have tried all the '"solutions", none of them worked.
Will apple ever fix the issue, or do they expect everyone on a 64bit windows machine to switch to a mac?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Installing windows vista load driver problem

I am trying to load Windows Vista Ultimate SP1 32. I follow the bootcamp assistant instructions. I select "Disk 0 Partition 3 BOOTCAMP" as instructed but the "Next" button will not function. I can tab or select between drives, Refresh and Load Driver but cannot get to Next. The Bootcamp instructions say to load drivers after Windows is installed but I can't get Windows installed?? What am I doing wrong?
Thanks,
Bill

Found my own problem. Had to click on drive options advanced and format. That still didn't work because the disk was too small. Increased disk size and successfully completed install.

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

Problems with Windows install and erasing Boot camp partition.

I recently decided I'd try running a copy of XP on my Macbook, the only reason being that the software for my OU work is only available on Windows. I used Boot camp assistant to partition my hard drive which went smoothly. When I tried to install Windows, I get to the Windows install screen, and it says "Press enter to begin installation". Unfortunately, my keyboard doesn't seem to work, so obviously I can't begin the installation. I've tried using my old Apple USD keyboard, but it didn't make any difference. I thought I'd try the whole process from scratch, but found I can't erase the original partition. I've read that you should use Boot camp assistant again, but when I press the continue key, I get the message:
"The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."
Does anybody know a way of sorting either of these problems out? Much appreciated.

I've been doing a bit more reading into the problem. I think the keyboard problem's because I'm not using the SP2 version on XP. So hopefully once I get a copy, I should be able to sort it. But I still can't seem to use BCA to erase the partition.

Problem with Business Objects 4.0 SP2 Windows install

Hello Experts,
    I have followed the steps outlined by Mr. Gingle's blog "Caboodle - Part 3 - The BOBJ4 Install"   Caboodle - Part 3 - The BOBJ4 Install
to do a vanilla BusinessObjects 4.o SP2 Windows install. The install goes fine but I do not see the Server Intelligence Agent
in the CCM. Looking into the log files in the directory "C:Program Files (x86)SAP BusinessObjectsSAP BusinessObjects Enterprise XI 4.0logging" I see the following:
FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
ENCODING:UTF8
RECORD_SEPARATOR:30
COLUMN_SEPARATOR:124
ESC_CHARACTER:27
COLUMNS:Location|Guid|Time|Tzone|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
SEVERITY_MAP: |Information|W|Warning|E|Error|A|Assertion
HEADER_END
.crypto.cpp:199:-: TraceLog message 1
|9664e8de-ad86-ff24-cb9d-24c469a525f0|2011 10 26 17:31:11:386|-0400|>>|A| |cms| 2704|4312|| ||||||||||||||||||||||assert failure: (.crypto.cpp:199). (FALSE : digest exception: The FIPS140 shared library could not be found (10027)).
.dbinfo.cpp:45:-: TraceLog message 2
|a9628c71-6cee-6874-8a14-15da66411e2e|2011 10 26 17:31:11:388|-0400|>>|A| |cms| 2704|4312|| ||||||||||||||||||||||assert failure: (.dbinfo.cpp:45). (false : Could not encrypt database connection string.).
In another log file in the same directory I see the following:
FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
ENCODING:UTF8
RECORD_SEPARATOR:30
COLUMN_SEPARATOR:124
ESC_CHARACTER:27
COLUMNS:Location|Guid|Time|Tzone|Importance|Severity|Exception|DeviceName|ProcessID|ThreadID|ThreadName|ScopeTag|MajorTick|MinorTick|MajorDepth|MinorDepth|RootName|RootID|CallerName|CallerID|CalleeName|CalleeID|ActionID|DSRRootContextID|DSRTransaction|DSRConnection|DSRCounter|User|ArchitectComponent|DeveloperComponent|Administrator|Unit|CSNComponent|Text
SEVERITY_MAP: |Information|W|Warning|E|Error|A|Assertion
HEADER_END
|F5ECB4F85C6A4E648FF1B464F0C56DED0|2011 11 07 16:48:57.889|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Server WV2ITBEAAP01:6400 not found or server may be down (FWM 01003) Connection refused: connect
|F5ECB4F85C6A4E648FF1B464F0C56DED1|2011 11 07 16:48:57.894|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Server WV2ITBEAAP01:6400 not found or server may be down (FWM 01003) Connection refused: connect
|F5ECB4F85C6A4E648FF1B464F0C56DED2|2011 11 07 16:48:57.894|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Is the CMS alive? Ensure the CMS supports SDK version 1400
|F5ECB4F85C6A4E648FF1B464F0C56DED3|2011 11 07 16:48:57.895|-0500|>>|E| |TraceLog| 5492|   1|main            | |0|0|0|0|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|-|-|BIPSDK.SessionMgr:logon|WV2ITBEAAP01:5492:1.2:1|Cubj.c7rakjbhhuO_Dw8JrI1|||||||||com.crystaldecisions.sdk.occa.security.internal.LogonService||Is the CMS alive? Ensure the CMS supports SDK version 1400
Do any of you have any ideas as to what might be the problem.
Many thanks,
Arvind

Hi David,
     Thanks for getting back to me. One question, Do I need to install CMS seperately or the does
     the BusinessObjects installs it?
     When I did the BusinessObjects install it installed the Microsoft SQL server 2008 Express and created an
     SQL Server Instance named BOE140. I checked with Microsoft SQL Server Management Studio (which I downloaded from Microsoft) and saw that no tables were created.
     Regarding the message
     "(.\crypto.cpp:199). (FALSE : digest exception: The FIPS140 shared library could not be found (10027))."
     listed in the log file above, what is my system missing.
     Looks like CMS is not getting installed.
     I am doing the install on a VMware Windows 2008 system with 8 GB ram and 50 GB file space.
     Are there any special requirements of configuration on the Windows system?
     Thanks for your help,
     Arvind

When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
And HDD is APPLE certified ( 250 GB )

Hello JashaCOLD,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

Uninstall/install oracleXE express problems on windows vista business

Hi,
I installed oracle express on windows vista.. no problem. Then I installed oracle application server... now oracle db web interface was not working (firewall was off). So I tried to uninstall/re-install oracle express.... but now it does not successfully install... in fact the installer just hangs when it is trying to initialise the services.. also it looks like the services were not uninstalled?? any ideas/help would be great I have tried uninstall/reinstall several times all with no success....

there are several similar threads on XE forum - http://forums.oracle.com/forums/search.jspa?threadID=&q=uninstall+problems+windows+vista&objID=f251&dateRange=all&userID=&numResults=15&rankBy=10001
also these resources maybe handy;
* installation guides - http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
* OTN forum needs extra registration(free) - http://www.oracle.com/technology/xe/registration
* all documentation - http://www.oracle.com/pls/xe102/homepage?remark=tahiti
* OTN portal - http://otn.oracle.com/xe

S12 Windows 7 Install -- Audio Button problems (Kalvin Klein?)

Similar Messages

Maybe you are looking for