Safari disappears from iPad with addition of Exchange Server email setup

After updating the iPad with the new operating system, I noticed Safari disappeared and found no solution. Apple personnel had me restore the iPad system (which wiped out all the settings and caused me to lose numerous documents). But after the restore, I had Safari...until I again set up my email through Exchange Server. I can set up Gmail and my email through MobileMe and there is no problem. But setting up my email from Exchange Server causes Safari to disappear every time. Likewise, if I delete the email from Exchange Server, Safari is suddenly available and working well.
Any solutions.

I'm having the same problem. Updated to 4.2 everything is great except Safari is gone.
When I go into the General Settings, restrictions are disabled but Safari (and only safari) is turned to off.
So I added a passcode and enable restrictions, but I can't turn on safari.
If I delete the exchange account. Safari comes back. If I add it again it disappears.
I can't seem to find anything that can be tweaked on the server side of exchange or the client side of the ipad, Anyone have any ideas?
Mick you wouldn't know what the exchange setting was that needed to be changed?
Message was edited by: is_john

Similar Messages

AppStore, iTunes, Safari disappeared from my iPad

AppStore, iTunes, Safari disappeared from my iPad

Check your restrictions
Settings>General>Restrictions>Safari/installing Apps/iTunes

Safari disappeared from my iphone 4s

Safari disappeared from my iphone 4s after joining a network at a friend's house and joining Craig's List. Has anyone heard of this happening? What should I do now?

Default apps are part of the iOS and cannot be deleted. Search all home screens and all folders and/or search for it with Spotlight, that will tell you what folder it's in.
Also check Settings > General > Restrictions to see if it has been restricted.
If not found, Settings > General > Reset > Reset Home Screen Layout.

HT1535 I was syncing my notes and they disappeared from ipad and now I can't find them on my pc.

I was syncing my notes and they disappeared from IPAD and now I can't find them. Where or how can I retrieve them?

Try Music App>Others

Is it possible to print larger than 4x6 from ipad with airprint?

Is it possible to print photos lrger than 4x6 from ipad with airprint?

Suzie-
It apparently depends on both the Photos program and which printer you have. My HP D110 only does 4X6, regardless of the paper size. Others can sense the paper size and adjust automatically.
I suggest you download the free iPad App, HP iPrint Photo. If it works with your printer, it has the capability of specifying paper size, and lets you change image size and orientation using two fingers. Some of the other printing Apps like Print n Share can do that, but are not free.
Fred

Safari disappeared from my husband's account.

Safari disappeared from my husband's account (not the administrator's account). How do I retreive it?

I take it you don't have backups. That's a much more serious problem than the one you're asking about, but I'll stick to the matter at hand.
You have three choices.
1. If you have another web browser installed, use that to download the Safari installer.
2. Use another computer to download the installer, then transfer the file to your husband's computer.
3. Reinstall the OS from the installation disc that you originally used to install it, then run Software Update to bring the installation up to date. Not recommended if you have no backups, but it will probably be OK.

From iPad with iOS 7.1 to a HP Officejet 6500 E709n Series printer does this support airPrint

From iPad with iOS 7.1
to a HP Officejet 6500 E709n Series printer
does this support airPrint?

My error.
I did not see the printer listed on the Airprint list and then added the other.
I will edit accordinging.
Apologies.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

I can't connect "new iPad" to my Microsoft exchange server

I have an iPhone 4 and a "new iPad" both running IOS 5.1. My iPhone 4 is connected to my work Microsoft exchange server but my iPad is having problems. I got my iPad on Friday and set it up that night and it connected to the Microsoft exchange fine however since Monday evening it has stopped working, it kept saying failing to connect to server.
I removed the account from my iPad and try to add it back on again but it now won't let me add the account and keeps saying no connection to server.
I have tried resetting my network settings but that didn't help, I have gone on to my work web mail server online and removed every device except my iPhone from the list of devices registered to the account but that hasn't helped.
Any ideas anyone, particularity interested in how to fix this and also why it worked fine till Monday but then just stopped.
Thanks in advance.

Not to worry found out that my work stopped iPad working on their exchange server without seeing the need to tell anyone in advance, but they left the iPhone working.
Thanks anyway.

Sync iPhone with work Outlook (Exchange Server) and home Outlook

Hi all,
I love my new iPhone 3G!
There is just one main thing remaining that I need it to do in order to fully replace my previous Windows Mobile phone functionality:
I need it to keep my work Outlook's contacts and calendars synchronized with my home Outlook (Outlook 2003 on Windows XP PC). Note: I do not want separate sets of work and personal contacts and/or calendar items, since I want all contacts and calendar items in both systems (differentiate by the Outlook category field).
With my previous Windows Mobile phone, it would sync with my work Exchange account (via wireless ActiveSync), and then resolve this with my local/home PC's Outlook when connected to my PC (using the local version of ActiveSync). When done, any contact or calendar change made at work, on my phone, or on my home PC would eventually be synchronized with all 3 systems (i.e., phone, work Outlook, and home Outlook).
The new iPhone 3G first beautifully sync'd to my local/home Outlook with iTunes 7.7. Then, when I configured my work Exchange ActiveSync with contacts and calendar sync on, it unfortunately cleared those sync'd items. Now the iPhone is beautifully sync'd with my work Outlook via Exchange ActiveSync, but iTunes will no longer allow my local sync. Thus, any changes at work or on the iPhone are not reflected at home
I researched this a little, and I see that the Apple MobileMe service may be able to help me. Can anyone tell me if it will allow me to sync the exact same items with my local Outlook, the iPhone, and directly/indirectly with my work Outlook (via Exchange ActiveSync)?
Thanks in advance,
Steve

I'm excited to finally sync my work email with my iPhone. Our IT didn't support it and we work off of an Exchange server. I, too, was nervous about which contacts to sync. While I want my work email, I don't need my contacts and would rather have mine from my mac at home. Unfortunately, you can only do one at a time. The following paragraph is from a c net review. Find the entire article here (the part about the Exchange Server is about 1/2 way down):
http://reviews.cnet.com/apple-iphone-3g/
//Once you're ready to go, the iPhone will sync your Outlook e-mail, contacts, and calendar. Be advised that while the iPhone can support multiple POP3 accounts at once (two Yahoo accounts, for instance), it syncs with only one Exchange server and, worse, with only with one calendar or contacts list at a time. If you have a separate personal calendar, your work calendar will replace it once you start the sync. (You'll be notified before it happens.)//
Hope this helps!
Vicki

Apple Mail with Office 365 Exchange server

Is anyone here using Apple Mail with Office 365 Exchange server on Mountain Lion? I have just upgraded to Mt Lion and decided to switch from Outlook to Apple Mail.app. My account was added successfully. Even contacts, calendar, tasks and notes work very well. My problem with Mail.app is that it does not sync any emails in subfolders prior to the day I added the account to Mail. For any older emails I have to open Outlook for Mac and look it up there. Other than this issue Mail is working well for all new incoming and outgoing emails.
Thanks

I Found a workaround. Please look at this other link: https://discussions.apple.com/thread/6615135

How to pass record Group from Forms with DATA_PARAMETER to Reports Server

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
Arif

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

Can't eprint from exchange server email address

I am unable to eprint from my exchange server email address and I can print from other accounts such as @att.net aacounts. This problem has started in the last week. I have reinstalled the printer and varified the allowed address.
Any ideas?

Hi Rick60422,
Welcome to the HP Support forums. I gather that in the last week or so you have been unable to print emails from your exchanger server email address.
I have included a document here that has trouble shooting steps to take when an ePrint job fails.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Exchange Server 2013 setup / coexistance Exchange 2010

So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.
My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation. Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.
[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.

Hi,
Let's try the following resolutions:
1. Check if the discovery SearchMailbox is present on Exchange 2010 when you run the Exchange 2013 Install.
2. Reinstall your Exchange 2013 server:
Open ADSIEDIT, CN=Configuration, DC=your domain ->CN=Services ->CN=Microsoft Exchange ->CN=First Organization ->CN=Administrative Groups ->Cn=Exchange Administrative Group ->CN=Servers ->CN=Server name
After remove the exchange server, please reinstall your exchange server to test the result.
Thanks,
Angela Shi
TechNet Community Support

Delay downloading Exchange server email

I use an iMac with an ethernet link to cable internet service. Using Mail, I have a strange delay of 1-2 minutes before email downloads from an Exchange server. Interestingly, my MacBook, also using Mail, downloads the same Exchange server email almost instantly using an Airport Extreme with the same cable modem providing the cable signal.
In fact, I just switched from a 2007 iMac to a 2010 iMac, used Migration Assistant to transfer everything from the 2007 to the 2010 iMac, and I have the same delay of about 1-2 minutes before email downloads from the Exchange server.
The email always downloads--it's the delay on the iMac that's puzzling.

It's hard to say based on what you posted. I would guess that the VPN connection doesn't provide the complete name resolution you get when connected to the network internally.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Safari disappears from iPad with addition of Exchange Server email setup

Similar Messages

Maybe you are looking for