Safari Displays Unexpected Date Value

I want to use the following script in my company website www.todoroffs.com, in order to always display the current year value within my copyright notice at the bottom of the pages:
<script>
     var today=new Date()
     var todayy=today.getYear()
     document.write(""todayy"")
     </script>
Safari displays the value "105" while other browsers display the desired value "2005".
Furthermore, I want to use the following script which is a variant of the first script:
<script>
     var today=new Date()
     var todayy=today.getYear()
     document.write(""todayy-1914"")
     </script>
Safari displays the value "-1809" while other browsers display the desired value "91".
Is this a bug in Safari? Is there a work-around?
Thank you.

Hi iBod,
I am not familiar with getFullYear( ).
I modified my code as follows:
Copyright © 1997–getFullYear( )
Safari and others display it as:
Copyright © 1997getFullYear( )
What is the proper syntax and format?
Thank you.

Similar Messages

Z10 error message unexpected data value

I recently upgraded to a Z10. After pairing my phone to my 2012 Chev 2500 I attempted to make my first voice activated hands free call. After going through the command of call (contact name) it starts the call, then it immediately disconnects with the error unexpected data value. I can dial the number with the dial pad or go to my contact list and access the number from there. I did send a Twitter to BBHELP however I still have not received an answer

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Display sound data value from ByteArrayOutputStream

hi People,
Can advise what is the function that i can use to retrieve or display the data that i stored in ByteArrayoutputStream buffer?
So far i can only store the data in... but how can i retrieve and display them on output panel?
Many Thanks

Hi again,
I have modify my code and found the error.. But this time i can't display the value correctly. Please advise...
//This method captures audio input from a microphone and saves it in a ByteArrayOutputStream object.
private void captureAudio(){
try{
//Get and display a list of available mixers.
Mixer.Info[] mixerInfo = AudioSystem.getMixerInfo();
System.out.println("Available mixers:");
for(int cnt = 0; cnt < mixerInfo.length; cnt++){
System.out.println(mixerInfo[cnt].getName());
}//end for loop
//Get everything set up for capture
audioFormat = getAudioFormat();
DataLine.Info dataLineInfo = new DataLine.Info(TargetDataLine.class,audioFormat);
//Select one of the available mixers.
Mixer mixer = AudioSystem.getMixer(mixerInfo[3]);
//Get a TargetDataLine on the selected mixer.
targetDataLine = (TargetDataLine)mixer.getLine(dataLineInfo);
//Prepare the line for use.
targetDataLine.open(audioFormat);
targetDataLine.start();
//Create a thread to capture the microphone
// data and start it running. It will run
// until the Stop button is clicked.
Thread captureThread = new CaptureThread();
captureThread.start();
} catch (Exception e) {
System.out.println(e);
System.exit(0);
}//end catch
}//end captureAudio method
public int[] ConvertSoundData (byte[] SoundData, int SampleTotal){
//Determine the original Endian encoding format
boolean isBigEndian = audioFormat.isBigEndian();
//this array is the value of the signal at time i*h
int x[] = new int[SampleTotal];
int value;
//convert each pair of byte values from the byte array to an Endian value
for (int i = 0; i < SampleTotal*2; i+=2) {
int b1 = SoundData;
     int b2 = SoundData[i + 1];
     if (b1 < 0) b1 += 0x100;
     if (b2 < 0) b2 += 0x100;
     //Store the data based on the original Endian encoding format
     if (!isBigEndian) value = (b1 << 8) + b2;
     else value = b1 + (b2 << 8);
     x[i/2] = value;
return x;
//This method creates and returns an
// AudioFormat object for a given set of format
// parameters. If these parameters don't work
// well for you, try some of the other
// allowable parameter values, which are shown
// in comments following the declartions.
private AudioFormat getAudioFormat(){
float sampleRate = 8000.0F;
//8000,11025,16000,22050,44100
int sampleSizeInBits = 16;
//8,16
int channels = 1;
//1,2
boolean signed = true;
//true,false
boolean bigEndian = false;
//true,false
return new AudioFormat(
sampleRate,
sampleSizeInBits,
channels,
signed,
bigEndian);
}//end getAudioFormat
//=============================================//
//Inner class to capture data from microphone
class CaptureThread extends Thread{
//An arbitrary-size temporary holding buffer
byte tempBuffer[] = new byte[10000];
public void run(){
byteArrayOutputStream = new ByteArrayOutputStream();
stopCapture = false;
try{//Loop until stopCapture is set by another thread that services the Stop button.
while(!stopCapture){
//Read data from the internal buffer of the data line.
//targetDataLine.read(byte[] b, int off, int len)
int cnt = targetDataLine.read(tempBuffer, 0, tempBuffer.length);
if(cnt > 0){
float sample_rate = audioFormat.getSampleRate();
float T = audioFormat.getFrameSize() / audioFormat.getFrameRate();
int n = (int) (sample_rate * T ) / 2;
System.out.println(n); ---------> to print the number of sample
//Save data in output stream object.
byteArrayOutputStream.write(tempBuffer, 0, cnt);
int[] SoundData = ConvertSoundData(tempBuffer,n);
for(int index = 0; index < SoundData.length; index++){
System.out.println(index + " " + SoundData[index]); ----------> to print the ALL sound data in the returned array.
}//end if
}//end while
byteArrayOutputStream.close();
}catch (Exception e) {
System.out.println(e);
System.exit(0);
}//end catch
}//end run
}//end inner class CaptureThread
The result i got during i sing "hmmm" to my microphone is as below:
1
0 1281
1
0 61184
1
0 24830
1
0 25598
1
0 33279
1
0 25350
1
0 19728
1
0 54537
Below is my question:
1) Why the number of sample keep on remained as 1? Since the sampling frequency is 8000Hz..
2) Why my index variable remained as 0? I suppose i will have 8000 values since my sampling rate is 8000Hz... Is it impossible to print 8000 data within 1 sec?
Is it advisable if i transfer the obtained numeric array directly for FFT analysis?
(I wish to do a real time frequency analyzer. With MATLAB, I can only do an analyzer by retrieving the .wav data content.)
I am shame to say i am still not clear enough with the sampling and data retrieve algorithm. Thats why i will have difficulties to delliver correct idea.
Appreciate if you have any tutorial can share with me so that i can understand more.
Thank you again.

JavaFX 2.0: PieChart - display PieChart data values

Hi,
I try to work with PieChart:
ObservableList<PieChart.Data> pieChartData = FXCollections.observableArrayList(
               new PieChart.Data("Application ", 20),
               new PieChart.Data("Service ", 28),
               new PieChart.Data("Group ", 25)
PieChart chart = new PieChart(pieChartData);
chart.setClockwise(false);
chart.setLegendVisible(true);
As a result I get a pieChart with labels ("Application", "Service", "Group") which are the same as the pieChart's legend strings. I'd like to see on the pieChart it's values (20, 28, 25) , and not legend's strings I see now. I checked all possible documentation and didn't find how to do it. So, please, help me find solution for the problem. Thank you

it's not supported yet, i think.
here is a example may help you :
for (final PieChart.Data data : chart.getData()) {
    data.getNode().addEventHandler(MouseEvent.MOUSE_PRESSED,
        new EventHandler<MouseEvent>() {
            @Override public void handle(MouseEvent e) {
                caption.setTranslateX(e.getSceneX());
                caption.setTranslateY(e.getSceneY());
                caption.setText(String.valueOf(data.getPieValue()) + "%");
}[http://docs.oracle.com/javafx/2.0/charts/pie-chart.htm|http://docs.oracle.com/javafx/2.0/charts/pie-chart.htm]
Edited by: 906680 on 2012-3-7 下午5:05

How to convert a date value into week value?

How to display the date value like '20010203'
into the week number of the year 2001?
When i type in the following sql
select week(chg_time) from site;
I got this error message
ORA-00904: invalid column name

use the to_char function, to format the date into a week number (then you might need to convert that to a number using to_number)
select to_char( sysdate, 'WW') from dual`
a description of datetime formats: http://download-west.oracle.com/otndoc/oracle9i/901_doc/server.901/a90125/sql_elements4.htm#48515

Data values on Bar Chart in a BI Publisher report (11g)

I have a bar chart that I created via the layout editor in BI Publisher 11g, and I'm displaying the data values on the chart. That part works great. However, we're noticing that the chart adds zeros to the end of the data values depending on the length of the number being passed to the chart. My data item is a number that is 5 bytes in total, with 2 decimals. If the data value is *10.10*, the data displayed on the bar chart shows *10.10*. But when my data value is *1.10*, the data displayed on the bar chart is *1.100*. And if my data value is *.10*, the bar chart displays *0.1000*. The bar chart adds zeros to the end as the number of characters to the left of the decimal decreases.
I don't see a way to make it not do that. Has anyone else run into this, and been able to change it?

Basically what are you trying to do :
Attaching Mutiple Data Definition to a XML Program and deciding which one to call ased on parameter.Sorry you can not do that one Data DEfinition per Report.
ut there is one way of doing that.
Create multiple data defintion( mutiple programs) and then a master program something like
IF Master Program Param1 = 'X'
call BI Program 1
ELSIF Master Program Param1 = 'Y'
call I Program 2....
End IF;

Dsiplay data values and data lables in a stacked column chart

Hi All
Is there a way to display data values and data labels in a stacked column chart. Mouse over or display of labels in legends wont help. It has to be in the chart .
Regards,
anshul

Hi Anshul,
You can display either data value or data label in a stacked column chart by checking the Data Label Displaying Mode option under Format Chart->Data Values.
You can also do the same by checking the same option under Format chart->Area Display->Data Values.
I dont think you would be able to display both in a column chart whereas you would be able to do it in a pie chart.
Hope this helps.
Regards
Sri Harsha

ALV Report how to display from and to date values in the header.

I develoeped alv report . i want to display selection screen from and to date values in top of page...
any sample code pls guide me..

You have to do many things...
first find the selection details using the FM.
RS_REFRESH_FROM_SELECTOPTIONS
use the Blog to Align/populate the Header from the selection table
/people/community.user/blog/2007/05/07/alignment-of-data-in-top-of-page-in-alv-grid

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new?

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?

http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go.....

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

Smart data value display ? BUG sqldeveloper EA2 but works in plsqldeveloper

Hi,
The below mentioned debug facility works in plsqldevloper but the same does not work in sqldeveloper both on 10g and 11g Oracle Database
Has anyone enocuntered this bug as smart data value / tooltip not displayed in sub proc while debug in
sqldeveloper 3.0.02
tooltip and values are dispalyed during debug in v_var1 but as u debug further to (sub procedure within the main procedure code) i.e procedure test1 ,values of v_var2 not being displayed in tool tip / smart data value until the debugger cursor comes out the sub procedure . Kindly replicate the example shown below in sqldevloper EA2
create or replace
PROCEDURE PROCEDURE1 AS
v_var1 char(20);
v_var2 char(20);
v_var3 char(20);
procedure test1 is
begin
v_var2 := 'this is sub proc' ;
end test1;
BEGIN
v_var1 := 'this is a test';
test1;
END PROCEDURE1;
Any comments/solution will be appreciated
SS
Edited by: user575518 on Jan 17, 2011 11:20 PM
Edited by: user575518 on Jan 19, 2011 9:45 PM

Hi,
The below mentioned debug facility works in plsqldevloper but the same does not work in sqldeveloper both on 10g and 11g Oracle Database
Has anyone enocuntered this bug as smart data value / tooltip not displayed in sub proc while debug in
sqldeveloper 3.0.02
tooltip and values are dispalyed during debug in v_var1 but as u debug further to (sub procedure within the main procedure code) i.e procedure test1 ,values of v_var2 not being displayed in tool tip / smart data value until the debugger cursor comes out the sub procedure . Kindly replicate the example shown below in sqldevloper EA2
create or replace
PROCEDURE PROCEDURE1 AS
v_var1 char(20);
v_var2 char(20);
v_var3 char(20);
procedure test1 is
begin
v_var2 := 'this is sub proc' ;
end test1;
BEGIN
v_var1 := 'this is a test';
test1;
END PROCEDURE1;
Any comments/solution will be appreciated
SS
Edited by: user575518 on Jan 17, 2011 11:20 PM
Edited by: user575518 on Jan 19, 2011 9:45 PM

How to set Default value of a parameter to display Current Date

I need to display the Default value for my parameter 'As of Date' which is of datatype Date as Current Date[DD-MON-YYYY].
How can I do This??

As Tamir-L pointed out, there is no direct way to do this, but there is a workaround:
First, create a new parameter, but do not base it on any item. Give the parameter a default value of "Today".
Then, create a condition like:
   (    :myParam = 'Today'
    AND <date_item> = sysdate)
OR (    <date_item> = to_date(:myParam, 'DD-MON-YYYY'))Where :myParam is the parameter you created, and <date_item> is the item you are comparing against.
To make things a bit more bulletproof, you could create a calculation that returns sysdate when the parameter is 'Today', a date when the to_date is successful, and NULL when the to_date fails, and use the calculation in the condition.

How to display only Day value instead of DATE in Bex Report

Hi Experts,
We have a Month to date Report, in this report we need to display only day value instead of DATE value,
Like
if Date is 14.05.2010 we need to show only 14
Regards,
Chandra

Hi ,
Thanks for Quick Response
we does have the option to create the char(calday or ...) value variable replacement with char (calday or ...) info object, we can replace with Report r variable value only not with info object.
i hope we can replace the with info object only with formula variable with replacement.
My BEx Report is Designed like
Columns
0Calday
Rows
Plant
Keyfigures
Actual
Plan
Report output Looks like month to date
0CALDAY            01.06.2010   02.06.2010 03.06.2010
P1 ACTUAL            10                     8                    4
P1 PLAN                 15                     6                    2
P2 ACTUAL              5                   10                     7
P2 PLAN                  4                      8                    3
Report should be
0CALDAY            1    2     3
P1 ACTUAL      10     8      4
P1 PLAN           15     6     2
P2 ACTUAL        5    10    7
P2 PLAN            4      8     3
please let me know how can i achive this
Regards
Chandra

SAP Dashboards - Area graph- Data values display - x-axis 1st value is not showing

Hi
Not able to show the first data value in area graph. 2500 is not showing in the chart...remaining values able to display...
Kindly let us know, is there any specific setting to be done....

Hi sunil,
Your question has the answer. When we display same data in line chart or bar chart, you have the space to start displaying the value. But in this case the area chart will accumulate the whole chart to show the lagging & leading data from the start to end, so you cannot view the initial value to display. If this chart doesn't suits your requirement you can go with other charts.
The workaround will be like, if the month's are static like will you be displaying all twelve months in this chart then i would request you to take twelve text components in top of the chart or in any comfortable space where you can bind those value.
Hope this information is helpful.

Not to display the null values from data base

Hiiii.
In a jsp file i have ten check boxes.The jsp file is mapped to a servlet file for parameter requesting and to
store it in DB.
The unchecked box values has null values.All the values are store in a Mysql DB table.
Again i have to display it in a jsp page from table.
The problem am facing was,how can i display only the values in a row.it must not display the null values and the crresponding column name.
Or any other way is their like below
How i can retrieve only the selected check boxes from tht jsp file.and store in backend.
Thanks in Advance
regards,
satheesh kannan

Here is a rough example that may give you some ideas:
On the JSP page:
<%if(myData.getFirstName()!=null){%>
Your First Name'
<input type="text" name="firstName" value="<%=myData.getFirstName()%>">
<%}%>
In the servlet:
String firstName= request.getParameter("firstName");
if(firstName!=null){
//write it to the database
}

Safari Displays Unexpected Date Value

Similar Messages

Maybe you are looking for