Safari doesn't work after new Installation of Lion

Hello,
I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
-Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
-VLC Media Player does not work as well
Any idea anyone?
thx
Mohammad

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player  only jumps up and down in the dock, and nothing else happens)

Similar Messages

  • Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

    Hi,
    I installed a real Win 7 / 64 professional full version on my Sat Pro L550-199, PSLW9E. Now I can't switch on my WLAN. The big FN-bottons doesn't exist. I tried lots of driver I found on the Toshiba Support page.
    Whitch is the right, or is Win 7 / 64 professional not supported with WLAN?
    How I can switch on WLAN without the FN-Key?
    Lenny

    Hi Lenny-27-7,
    Is your WLAN card installed properly in device manager? It must be listed under network devices without yellow exclamation marks. So you can make sure that WLAN card is installed.
    For all FN keys you have to install Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba page where you can find the WLAN driver too:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    If you have installed everything you can start with WLAN configuration :)

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Safari doesn't work after Yosemite install

    I've recently installed Yosemite in my iMac*. Everything works as supposed except for Safari. Every time the computer wakes from sleep Safari does NOT work at all. It doesn't load any site. The only solution so far is to restart the iMac.
    any clues?
    * 27-inch, Late 2009, 2.66 GHz Intel Core i5, 16 GB 1067 MHz DDR3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Pages doesn't work after upgrading to Mountain Lion

    I'm not able to launch Pages 09 (neither Numbers nor Keynote) after having installed Mountain Lion. I've tried to reinstall it twice from the original install disc, but still doesn't work.
    Thanks for the help

    If you migrated iWork from another computer, or dragged it over, or had a demo version or previous version on the System, there can be missing or wrong files in your System.
    Do the Complete reinstall:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
    …and see if that fixes it.
    Peter

  • Facetime doesn't work after upgrading to mountain lion!!!

    plz who can help me to fix this problem the camera is unrecconized by the macbook after installing the mountain lion...

    If you migrated iWork from another computer, or dragged it over, or had a demo version or previous version on the System, there can be missing or wrong files in your System.
    Do the Complete reinstall:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
    …and see if that fixes it.
    Peter

  • Safari doesn't work after iOS 8.3 update

    After the iOS 8.3 update, Safari is completely useless. I am unable to open any URLs or search. Nothing happens when I type and return in the search bar. Sometimes even the go button doesn't highlight/activate.
    I tried removing cache and disabling iCloud, but nothing worked.
    Does anyone have a solution?

    Replying to my own message.   I actually looked at the device logs again there is a bunch of mobile safari issues.   Most of which apple would have to symbolicate against their source to figure out the actual bug.  
    Looks like some deadlock issues, which explains what I am seeing.
    Here is segment of one of the crash logs:
    Incident Identifier: DE800F40-F473-46F0-AD43-47FEF1EFC22C
    CrashReporter Key:   d8e20c2a00e03bcf19302e14fc9a7dfd8ee63e77
    Hardware Model:      iPhone7,2
    OS Version:          iPhone OS 8.3 (12F70)
    Kernel version:      Darwin Kernel Version 14.0.0: Sun Mar 29 19:42:54 PDT 2015; root:xnu-2784.20.34~2/RELEASE_ARM64_T7000
    Date:                2015-04-16 20:36:22 -0500
    Exception Code:      0x8badf00d
    Reason:              com.apple.mobilesafari failed to exit in time
    Elapsed total CPU time (seconds): 6.790 (user 6.790, system 0.000), 68% CPU
    Elapsed application CPU time (seconds): 4.593, 46% CPU
    Thermal data unavailable
    Frontmost process PID:    480
    Frontmost process PID:    787
    Frontmost process PID:    54
    Stackshot trace buffer size too small, trying again with 524288 bytes.
    Jetsam Level:              0
    Free Pages:             5719
    Active Pages:          71064
    Inactive Pages:        29457
    Purgeable Pages:          95
    Wired Pages:           55448
    Speculative Pages:      5501
    Throttled Pages:           0
    File-backed Pages:     52859
    Compressions:        2964481
    Decompressions:      1940201
    Compressor Size:       85417
    Busy Buffer Count:         0
    Pages Wanted:              0
    Pages Reclaimed:        4730
    Process 0 info:
      resident memory bytes:  1946058752
      page faults:               42305
      page-ins:                      1
      copy-on-write faults:          0
      times throttled:               0
      times did throttle:            0
      donating PIDs:
      user   time in task:       76194.184738 seconds
      system time in task:           0.000000 seconds
    Process 0 kernel_task threads:
    thread 0x65 TH_WAIT|TH_UNINT 0xffffff8002533db4
      thread priority:               92
      Base thread priority:          92
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel cont: 0xffffff80020a03ac
      user   time in thread:    40.375121 seconds
      system time in thread:     0.000000 seconds
    thread 0x66 TH_RUN|TH_IDLE 0
      thread priority:                0
      Base thread priority:           0
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel cont: 0xffffff800203097c
      user   time in thread: 35557.313444 seconds
      system time in thread:     0.000000 seconds
    thread 0x67 TH_WAIT|TH_UNINT 0xffffff800202c0c8
      thread priority:               95
      Base thread priority:          95
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel cont: 0xffffff800202c0c8
      user   time in thread:     7.218136 seconds
      system time in thread:     0.000000 seconds
    thread 0x68 TH_WAIT|TH_UNINT 0xffffff80024ee1a0
      thread priority:               80
      Base thread priority:          80
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel cont: 0xffffff8002046fd4
      user   time in thread:     5.578716 seconds
      system time in thread:     0.000000 seconds
    thread 0x69 TH_WAIT|TH_UNINT 0xffffff80024ee1b0
      thread priority:               93
      Base thread priority:          93
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel cont: 0xffffff80020472ec
      user   time in thread:     0.308781 seconds
      system time in thread:     0.000000 seconds
    thread 0x6a TH_WAIT|TH_UNINT 0x33726011cd329b29
      thread priority:               95
      Base thread priority:          95
      requested qos:           QOS_CLASS_UNSPECIFIED
      requested qos overrride: QOS_CLASS_UNSPECIFIED
      effective qos:           QOS_CLASS_UNSPECIFIED
      thread sched flags:     none
      kernel: 0xffffff8002031fd8 0xffffff800202fed8 0xffffff8002051f34 0xffffff80020df3a0
      user   time in thread:     0.000072 seconds
      system time in thread:     0.000000 seconds

  • My Safari doesn't work after updating.

    After deleting Safari, I cannot install it anymore.
    I installed "SafariSpeed" and updated Safari 2.0 to Safari 3.0, after that, I had 2 adressbars, so I uninstalled SafariSpeed again. When I still had 2 adressbars after uninstalling this, I removed Safari from my system using "Appdelete". And I think I accidentaly removed some important files, because I can't install Safari anymore, and I can't even install the newest version of Mac OS X. The Installprogram says I can't install it because "my system does not meet the requirements for this update". Installing other program's like iTunes does work.
    - Rebooting my system didn't work.
    - I cannot obtain the removed files using "Data Rescue II"
    - I can't install Safari 2.0 and update it to 3.0.
    Can anyone help me with this?

    You'll have to use the Tiger install DVD to reinstall Safari 2 then Software Update to get it to 2.0.4.

  • MacBook Air Safari doesn't work after ML update

    After I updated my MacBook Air 2012 to Mountain Lion yesterday, Safari stopped working. It says it's connected but Safari won't open any page.
    This is the third time it happens and I'm getting sick of it (SL, Lion OS and now ML)
    I had to reset my iMac (PRAM) to get it back working again, but is there another suggestion?
    Thanks in advance.

    Hey I just foud this on this forum. It's worth a try :-)
    Also, are you able to ping the network. Go to Terminal and type the following:ping google.com
    you should get something like this:
    Arnolds-MacBook-Air:~ arnieaz$ ping google.com
    PING google.com (74.125.224.168): 56 data bytes
    64 bytes from 74.125.224.168: icmp_seq=0 ttl=55 time=25.236 ms
    64 bytes from 74.125.224.168: icmp_seq=1 ttl=55 time=29.222 ms
    Christoper Waiz
    Re: WiFi Issues With MacBook Air 
    Jul 27, 2012 11:26 AM (in response to curvetr)
    I had similar issues to the ones that seem to be plaguing people in this thread. However, I found a solution that worked for me, and will hopefully help you and some others!
    System prefs > Network > Cog/gear button on the bottom left (sorry dont now what it's called) > Set service order.
    If you find that the service order puts bluetooth ahead of Wifi, try switching Wifi up to the top spot. It worked for me. Let me know how it goes, hopefully it works!
    Best of luck, Chris

  • Satellite L450D Webcam not working after new installation without recovery

    Hi there,
    as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
    The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
    No driver installation, bios update and re-installation worked to get this part to work.
    Did anyone of you know this problem and have a fix for me?
    Thanks in advance.
    Greetings Saphire
    P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

    Hi
    I dont think that this needs to be fixed because I dont think its hardware related issue.
    I think there is something wrong with the software on your notebook.
    I mean everything worked perfectly until virus has damage the OS. Right?
    You said this:
    >I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
    I really wonder why you could not get this working using Recovery disk.
    So possibly this is the key to this issue
    On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
    Also webcam driver v 1.1.1.4 is available there
    I think the OS is responsible for your issue possibly some patches are applied or similar

  • Safari doesn't work after Java Download

    After I downloaded Java 1.3.1 and 1.4.2 and the Security Update yesterday, my Safari browser "can't find the server." (I also downloaded iTunes 5.0, but I don't think that's a problem.) Another casualty: my images don't download in Entourage either.
    I'm using Firefox to write this.
    Thanks.
    Todd

    Hi Gary:
    Thank you for the kind words.
    I think your comment about
    over-correcting
    is most perceptive. One thing I have learned from rattling around the computing world for over 45 years is to 'fix' things one step at a time. Another platitude is "if it is not broken, do not fix it."
    As a general observation, I think Apple does a good job in testing software changes prior to general release. The problems you see here - while real - do not, generally, reflect the general user population. These forums are roughly akin to visiting a hospital - most people are sick! That is not meant to trivialize real problems. Each computing configuration is slightly different, however, and there are some situations that do escape testing. (I do not work for Apple, by the by).
    I'm not an expert either - far from it!
    Regards,
    Barry

  • Safari doesn't work after ios 5 update

    after i updated to ios 5 on my iphone 4, swhen i press on safari it closes straight away and i tried restoring it again but it still soesnt work.

    ryan194 For got to say do what i did and go to http://www.apple.com/feedback/iphone.html and fill out a bug form on this like I did and exsplain that it limits the usability of safari since can't no longer read pages do to no zoom.
    This really has messed up people with vision disability access to the iPhone browser.

  • Execute Package Task Not Working After New Installation VS2012

    After installing VS2012 Update 4, the execute package task runs the child package out of order.
    The same version of VS is being used as the old computer (same everything, SQL 2012, OS...).  The solution works correctly on machines where VS2012 was installed prior to July 2014.  I've downloaded the BIDS, SSDT.
    Anyone else have the same problem?  I have yet to find anywhere on the internet where someone has reported the same issue.  It has happened on multiple computers since August 2014.

    How to reproduce?
    It is not very likely, but did you try searching MS Connect for this issue?
    Arthur
    MyBlog
    Twitter

Maybe you are looking for