Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

Hi,
I installed a real Win 7 / 64 professional full version on my Sat Pro L550-199, PSLW9E. Now I can't switch on my WLAN. The big FN-bottons doesn't exist. I tried lots of driver I found on the Toshiba Support page.
Whitch is the right, or is Win 7 / 64 professional not supported with WLAN?
How I can switch on WLAN without the FN-Key?
Lenny

Hi Lenny-27-7,
Is your WLAN card installed properly in device manager? It must be listed under network devices without yellow exclamation marks. So you can make sure that WLAN card is installed.
For all FN keys you have to install Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba page where you can find the WLAN driver too:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
If you have installed everything you can start with WLAN configuration :)

Similar Messages

Safari doesn't work after new Installation of Lion

Hello,
I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
-Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
-VLC Media Player does not work as well
Any idea anyone?
thx
Mohammad

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

Imessage doesn't work after the installation of the update 6.0

imessage doesn't work after the installation of the update 6.0

iMessage will not work until it's activated.
Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Switch iMessage back ON.

IMessage doesn't work after the installation of the update 5.1

iMessage doesn't work after the installation of the update 5.1

I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
Thanks
Jo

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

CS4 doesn't work after LION installation

After the Lion installation i had several problems.
One of these is that the cs4 doesn't work.
i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
I had to reinstall all the suite that now works.
The question is... why??
I thought is is better to format the mac... should i do ?
thanks

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

BT and WLan don't work after new WIn 7 installatio on Satellite C850 PSKCAV

Hello
I have Satellite C850 - short model PSKCAV. I have installed Windows 7 32bit correctly but the BT is not installed correctly, I have tried many options but i couldn't. activate the WIFI neither the BT.
What can I do?
Thank u.

If you want to have well working BT and WLAN you must install right drivers and some additional Toshiba specific tools and utilities.
I dont know where you have bought this notebook (country) but visit please Toshiba support page for your country and install all offered stuff for Win7, especially BT filter, WLAN card and Toshiba Value added package.
If you want to have more help from us post exact model and country of purchase.

Re: Satellite L300D-13S - WLan doesn't work using Vista

I have a L300D-13S which came with Visa Home Premium on it.
Its working fine APART from the wireless which refuses to work.
I always get "Wireless association failed because Windows did not receive any response from the wireless router or access point"
The wiresless is a Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
I'm running the latest BIOS and the 6.1148.924.2008 Drivers dated 24/09/2008. If I use the latest drivers from the RealTek site I get a message about an unknown error.
If I use the Ethernet NIC then it gets an IP address fine so its not the Broadcast Flag Issue.
Its not wireless security (I understand Vista does not support 128Bit WEP). I've turned it off and it still does it.
Other Laptops running XP connect fine and this laptop connects fine using no security or WEP or WAP if I boot into Linux.
So the problem obviously lies with Vista and/or the Drivers.
Has anyone solved this.
And no - Do not tell me to go out and buy a "Vista compatible" Router.
If Vista Does not work with a router that XP and Other operating systems work with then Vista is flawed.

It only occurs with the WLAN. If I plug into the back of the router with a cable then everything is totally solid. I get DHCP from the router and everything is fine. It is only the wireless that does it.
Oddly enough it used to work. When I first powered the machine on it saw the network and connected and everything was fine until I rebooted when it decided not to work any more. I thought it was something I had done so as I'd not really done much with the machine I did a recovery on it and again it worked again fine (I downloaded a few 100MB of downloads). Then rebooted and the wireless was broken again which is why I think its Vista and not my router.
Its not even making it through to the router to get an IP address on the wireless - it never even sees it.
This is what is recorded in the event log.
Log Name: System
Source: Microsoft-Windows-Diagnostics-Networking
Date: 13/11/2008 10:58:15
Event ID: 6100
Task Category: (12)
Level: Information
Keywords: (2)
User: LOCAL SERVICE
Computer: Kodaly
Description:
Helper Class (RNWF MSM Helper Class) Event:
Wireless Diagnostic Helper Class Event
For complete information about this session see the Wireless Diagnostic Informational Event.
Helper Class: Native WiFi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: bd8e9745-4f52-40fa-a989-4f2f0e1d7d67
Interface name: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
Interface type: Native WiFi
Profile: Discovery connection
SSID: smokey
SSID length: 6
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: Problem found
Root cause:
Windows cannot connect to "smokey"
Wireless association failed because Windows did not receive any response from the wireless router or access point.
Detailed root cause:
Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
Repair option:
Click for information on troubleshooting low wireless signal quality problems
Message was edited by: Stephen_a_1

Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

Hi everyone.
At the beginning I'm sorry for my bad english so I will say shortly.
A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
I can't speak with friends on skype ;( Help me. I hope you know what I say.

Hello
Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

Satellite M70-394: WLan does not work after wake up from standby

Hi all....
I have a problem with my WLan connection and hope one of you may be able to help. Starting my computer from off there isn't a problem with the WIFI connection but if I put the computer into standby by closing the lid and then restarting it from there the light comes on briefly for wi fi but then goes off and the only way I can connect is through a cable.
Any suggestions would be gratefully appreciated.

Hi
I have read in the forum that some similar "Wlan standby" issues were fixed by BIOS update.
I think you should compare the BIOS version on the notebook with the BIOS which is available on the website. If there is a new update try to upgrade it
Be sure that you have chosen the right BIOS.

Satellite L450D Webcam not working after new installation without recovery

Hi there,
as posted in the thread title I have a problem with the integrated webcam of a customer notebook. Two days ago the operating system of this laptop was damaged by a virus and needed to be re-installed. I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
The only thing that worked was a clean install with a windows 7 64 Bit retail dvd and the key printed on the sticker of the laptop. I managed to get everything working again except one part - the webcam.
No driver installation, bios update and re-installation worked to get this part to work.
Did anyone of you know this problem and have a fix for me?
Thanks in advance.
Greetings Saphire
P.S.: One thing shall be also important. When I look into the installed devices manager the driver for the webcam is listed as usb webcam and the manufaturer of it is Microsoft.

Hi
I dont think that this needs to be fixed because I dont think its hardware related issue.
I think there is something wrong with the software on your notebook.
I mean everything worked perfectly until virus has damage the OS. Right?
You said this:
>I tried to install it with the recovery partition, which did not work. After it I tried to re-built it with the dvd I burned from the recovery partition with the same result.
I really wonder why you could not get this working using Recovery disk.
So possibly this is the key to this issue
On the Toshiba European driver page I could find Registry Patch v1.1 For Win 7 64bit
Also webcam driver v 1.1.1.4 is available there
I think the OS is responsible for your issue possibly some patches are applied or similar

Power button doesn't work after new update...and that's the least of it

Ever since I updated my 4S with the new software my phone has had so many problems:
Power button no longer works. I have to hold both the home button down and the power button to "reset" my phone to turn it off.
I am having to do this CONSTANTLY b/c my phone freezes up ALL the time. When texting, using maps, other apps. Sometimes I can't get the freaking thing to even unlock. Texting is a disaster. Half the time they don't go through and when my phone freezes up for the millionth time that day and I reset, I later find out that my freaking texts didn't even go through. I HATE THE NEW SOFTWARE HELP!!

If you are able to hold your home button and sleep/wake button down at the same time to reset the phone, you should be able to power it off just fine...

Software Update doesn't work after new SSD install

I just installed a new SSD into my five year old MacBookPro (CoreDuo). I am taking the opportunity to reinstall from the ground up, getting rid of a lot of the cruft I've gathered over the years. I installed 10.6 fresh from the DVD and then ran software update. I could update iTunes, Airport, etc, but couldn't run the 10.6.6 combo updater. I was told that the file was corrupted during download and wouldn't expand.
I downloaded the standalone combo updater from the website and that worked fine. However, when I went to install the drivers for my printers via the System Preferences function, I get the same error. Is there a setting or something that I missed?

In 10.6.8 Apple won't allow Mac's to connect to WEP Encrypted networks, and won't reconnect to "hidden" networks automatically.
Use a Ethernet cable until you can change the WIFI
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Firewire extension doesn't work after SL installation

Hi everyone,
I recently installed Snow Leopard and I'm using a WD MyBook Studio Edition 500 GB as Time Machine backup drive. Unfortunately since last week it's not working any more. I get the following error message:
" system extension can't be used
the system extension "/System/Library/Extensions/IOFireWireWDHID.kext" has not been installed correctly and therefore cannot be used. Try re-installing it or contact the manufacturer for an update."
Does anyone have a clue how to re-install it?

Reinstall Snow Leopard. Alternatively, contact WD and see what they say.

Visual studio 2013 doesn't work after win10 installation

errors in EditorPackage loading, can't apply settings, i can't even see the code - it says: no exports were found that match the constraint.

Hi refaedi1,
In addition to what Noel suggested, regarding the error message, please also take a check of the following blog:
Fix Visual Studio Error “No exports were found that match the constraint”
Just delete or rename this folder:
%AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
or
%AppData%\..\Local\Microsoft\VPDExpress\11.0\ComponentModelCache
For Visual Studio 2013, change the version number:
%AppData%\..\Local\Microsoft\VisualStudio\12.0\ComponentModelCache
Restart Visual Studio.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

Similar Messages

Maybe you are looking for