Safari is slowly getting more buggy. Actions, such as clicking on a field, don't give the expected results. I may have to click on the red exit button 5 times to get it to work. I get unwanted dropdown menus. I have version 5.1.7 on OS 10.6.8
Safari is slowly getting more buggy. Actions, such as clicking on a field, don't give the expected results. I may have to click on the red exit button 5 times to get it to work. I get unwanted dropdown menus. I have version 5.1.7 on OS 10.6.8. System is 3 years old.
Are you running low on RAM..?
see > Using Activity Monitor
Is your Hard Drive getting full...?
see > Freeing space on your Mac OS X startup disk
Have you tried Repair Disk Permissions after upgrading Safari...?
see > About Disk Utility's Repair Disk Permissions feature
Reset Safari...?
Similar Messages
-
After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.
Have you run it in a debugger? That will show you exactly what is happening and why.
-
I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?
no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing. -
Unable to get the expected results with connection pooling
Hi All,
I have been trying to create JDBC connection pooling provided by the Apache Tomcat 4.0 with MySQL 4.0.16-nt at http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html and my configuration is as follows
server.xml
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<!-- Maximum number of dB connections in pool. Make sure you
configure your mysqld max_connections large enough to handle
all of your db connections. Set to 0 for no limit.
-->
<parameter>
<name>maxActive</name>
<value>100</value>
</parameter>
<!-- Maximum number of idle dB connections to retain in pool.
Set to 0 for no limit.
-->
<parameter>
<name>maxIdle</name>
<value>30</value>
</parameter>
<!-- Maximum time to wait for a dB connection to become available
in ms, in this example 10 seconds. An Exception is thrown if
this timeout is exceeded. Set to -1 to wait indefinitely.
-->
<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>
<!-- MySQL dB username and password for dB connections -->
<parameter>
<name>username</name>
<value>javauser</value>
</parameter>
<parameter>
<name>password</name>
<value>javadude</value>
</parameter>
<!-- Class name for mm.mysql JDBC driver -->
<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>
<!-- The JDBC connection url for connecting to your MySQL dB.
The autoReconnect=true argument to the url makes sure that the
mm.mysql JDBC Driver will automatically reconnect if mysqld closed the
connection. mysqld by default closes idle connections after 8 hours.
-->
<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
</ResourceParams>
</Context>
web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>MySQL Test App</description>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/TestDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
test.jsp
<jsp:useBean id="foo" class="foo.DBTest" scope="page" />
<html>
<head>
<title>DB Test</title>
</head>
<body>
<%
foo.DBTest tst = new foo.DBTest();
tst.init();
%>
<h2>Results</h2>
Foo <%= tst.getFoo() %>
Bar <%= tst.getBar() %>
</body>
</html>
DBTest.java package
package foo;
import javax.naming.*;
import javax.sql.*;
import java.sql.*;
public class DBTest {
String foo = "Not Connected";
int bar = -1;
public void init() {
try{
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Boom - No Context");
DataSource ds =
(DataSource)ctx.lookup(
"java:comp/env/jdbc/TestDB");
if (ds != null) {
Connection conn = ds.getConnection();
if(conn != null) {
foo = "Got Connection "+conn.toString();
Statement stmt = conn.createStatement();
ResultSet rst =
stmt.executeQuery(
"select id, foo, bar from testdata");
if(rst.next()) {
foo=rst.getString(2);
bar=rst.getInt(3);
conn.close();
}catch(Exception e) {
e.printStackTrace();
public String getFoo() { return foo; }
public int getBar() { return bar;}
Now when I am trying to run this on browser, everything goes fine except it doesn't show the expected results, instead of that it shows following in the browser:-
Results
Foo Not Connected
Bar -1
Can anybody help me out as to why I am getting such result while everything is right from my side. Is the program unable to connect to the database or it is not supporting the JDBC version that I am using.
Thanks in advance
Regards
VikasOh, I think this is not the right place to post this message. I have placed the same in other place of this forum. please ignore this post here!!
MJ, by the way the link that you suggested is not useful to me.
Thank you -
Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks
You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.
-
I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?
Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen -
I have tried to restore my iPhoto library from Time Machine. It starts then I get an 'No permissions' error. What do I do?
See #E9 in Time Machine - Troubleshooting.
-
teaching my self the Iweb app and there was a tutorial video, I watched a few time and now I am trying to get it back for reviewing. How do I do that retive the Iweb video?
Robin ~ Welcome to the Support Communities. Perhaps the video was one of these:
http://www.apple.com/findouthow/web/ -
ISE Guest portal CWA - Webauth exit button on Login Successful page not working (Safari and Chrome)
Hello
Has anyone else experienced the issue where this exit button works when IE is used to login to the ISE Guest portal, but not when Chrome is used. Same for Safari (from IPAD).
Sent from Cisco Technical Support iPad AppGoogle Chrome is not a fully supported browser for use with the Administrative User Interface of the Identity Services Engine (ISE), Version 1.1.3 and earlier.
-
Thinkpad laptop, red "mouse" button/nub in keyboard does not work with version 4.0, Why?
IBM and/or Lenova laptop computers have the red button/nub in the center of the keyboard that acts with "mouse" functions such as scrolling up and down pages. After downloading Version 4.0 of Firefox this feature does not work anymore. Is it locked in some settings?
i figured it out!
1) go to control panel
2) click on mouse
3) click on the UltraNav tab at the top
4) for the TrackPoint, i have the Enable TrackPoint box checked and the "Use as pointing device with advanced features
5) click on Settings
6) click on settings again towards the bottom right
7) for "Scrolling Type" click on Smooth.
that should work! -
HT4437 My airplay button is gone...NOTHING works to get it back
Is there any REAL WAY to steam from my ipad to Apple TV with the upgrades hoe. I lost my airplay icon and gave up on finding it til today....any more suggestions
Thanks....judyHave you checked the troubleshooting guide?
http://support.apple.com/kb/ts4215 -
I am looking for only column compare for making my target table same as source table.
My query:
select case when column_name_s is null and column_name_t is not null
then 'alter table GRADE_CONVERSION drop ' || column_name_t || ';'
when column_name_s is not null and column_name_t is null
then 'alter table GRADE_CONVERSION add ' || column_name_s || ' ' || data_type_s ||';'
else 'alter table GRADE_CONVERSION modify ' || column_name_t || ' ' || data_type_t ||';'
end alterations
from (select s.column_name column_name_s,t.column_name column_name_t,
s.data_type data_type_s,t.data_type data_type_t
from (select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'erhan'
and table_name = 'GRADE_CONVERSION'
) s
full outer join
(select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'sarigul'
and table_name = 'GRADE_CONVERSION'
) t
on s.column_name = t.column_name
Tables:
Target table: GRADE_CONVERSION table in sarigul@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
Source table: GRADE_CONVERSION table in erhan@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
CREATED_BY
VARCHAR2(30)
CREATED_DATE
DATE
MODIFIED_BY
VARCHAR2(30)
MODIFIED_DATE
DATE
want to see the result similar to this *(please ignore the column names here this is just a plain exemple:)
Alter table Target_table modify BOOK_ID Varchar2 (4);
Alter table Target_table add ISBN_10 Varchar2(13), null;
Alter table Target_table drop TITLE;I am looking for only column compare for making my target table same as source table.
My query:
select case when column_name_s is null and column_name_t is not null
then 'alter table GRADE_CONVERSION drop ' || column_name_t || ';'
when column_name_s is not null and column_name_t is null
then 'alter table GRADE_CONVERSION add ' || column_name_s || ' ' || data_type_s ||';'
else 'alter table GRADE_CONVERSION modify ' || column_name_t || ' ' || data_type_t ||';'
end alterations
from (select s.column_name column_name_s,t.column_name column_name_t,
s.data_type data_type_s,t.data_type data_type_t
from (select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'erhan'
and table_name = 'GRADE_CONVERSION'
) s
full outer join
(select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'sarigul'
and table_name = 'GRADE_CONVERSION'
) t
on s.column_name = t.column_name
Tables:
Target table: GRADE_CONVERSION table in sarigul@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
Source table: GRADE_CONVERSION table in erhan@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
CREATED_BY
VARCHAR2(30)
CREATED_DATE
DATE
MODIFIED_BY
VARCHAR2(30)
MODIFIED_DATE
DATE
want to see the result similar to this *(please ignore the column names here this is just a plain exemple:)
Alter table Target_table modify BOOK_ID Varchar2 (4);
Alter table Target_table add ISBN_10 Varchar2(13), null;
Alter table Target_table drop TITLE; -
Membership details:
Creative Cloud Student and Teacher Edition (one-year)
Subtotal: 29.99 USD
Tax/VAT: 2.10 USD
Total payment today: 32.09 USDHere are your contact options: Contact Customer Care, 1 (800) 833-6687, and Adobe Customer Care (@AdobeCare) | Twitter.
Benjamin -
I have an iPad2 and recently updated the ios. Since the update, I cannot connect to wi-fi through my router. I can still connect at work, but at home it will just not work. I have tried everything I can think of. I have reset, uninstalled, re-installed, and changed routers. 3 times. I cannot get it to work. Does this have something to do with the update? I have even reset the network settings, and restored the ipad itself to factory default settings. Can anyone help me?
Try and "Forget This Network"
Settings>Wi-Fi>tap little arrow on right of network.
http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg -
Help me to get the expected output for this procedure
Hi
i wrote a procedure in this way
create or replace PROCEDURE compare_data(tabname in varchar2 default 'VARE_PPP',current_version in integer default 258,previous_version in integer default 253)
is
TYPE table_type IS TABLE OF varchar2(4000)
INDEX BY BINARY_INTEGER;
t1 table_type ;
SUBTYPE max_varchar2_t IS VARCHAR2 (32767);
stmt_col_list max_varchar2_t;
stmt_row_val max_varchar2_t;
col_select_list max_varchar2_t := NULL;
col_list_tab1 max_varchar2_t := NULL;
col_list_tab2 max_varchar2_t := NULL;
col_list max_varchar2_t := NULL;
select_list_ver1 max_varchar2_t :=NULL;
select_list_ver2 max_varchar2_t := NULL;
type t_crs is ref cursor;
c_get_diff t_crs;
procedure get_header(tabname in varchar2) is
col_name varchar2(100);
cursor c_column_list is
select COLUMN_NAME from all_tab_columns WHERE table_name = tabname and column_name not in('VERSION','LAST_MODIFIED_TIMESTAMP','LAST_MODIFIED_USER') order by COLUMN_ID asc;
--stmt_col_list := 'select COLUMN_NAME from all_tab_columns WHERE table_name = '||tabname||' and column_name not like != '||temp1||' and column_name != '||temp2||' and column_name != '||temp3||' order by COLUMN_ID asc' ;
begin
col_select_list := 'tab1.version';
htp.tableheader('Version');
open c_column_list ; --for stmt_col_list;
loop
fetch c_column_list into col_name;
exit when c_column_list%notfound;
htp.tableheader(col_name);
if col_name not like 'LAST_MODIFIED_TIMESTAMP' or col_name not like 'LAST_MODIFIED_USER' then
if col_list_tab1 is null then
col_list_tab1 :='tab1.'||col_name;
col_list_tab2 :='tab2.'||col_name;
col_list := col_name;
elsif col_name not like '%END%' then
--dbms_output.put_line('deepak:'||g_columns (l_index).column_name);
col_list_tab1 :=
col_list_tab1 || '||' ||'tab1.'||col_name;
col_list_tab2 :=
col_list_tab2 || '||' ||'tab2.'||col_name;
col_list :=
col_list || ',' ||col_name;
end if;
col_select_list :=
col_select_list || ', ' ||'tab1.'||col_name;
end if;
end loop;
DBMS_OUTPUT.put_line('col_select_list:'||col_select_list);
DBMS_OUTPUT.put_line('col_list_tab1:'||col_list_tab1);
DBMS_OUTPUT.put_line('col_list_tab2:'||col_list_tab2);
DBMS_OUTPUT.put_line('col_list:'||col_list);
close c_column_list;
end get_header;
procedure get_difference(ver1 in integer,ver2 in integer) is
name_column varchar2(100) ;
begin
select_list_ver1 := 'SELECT '||col_list||' FROM '||tabname||' WHERE VERSION = '||current_version;
select_list_ver2 := 'SELECT '||col_list||' FROM '||tabname||' WHERE VERSION = '||previous_version;
stmt_row_val := 'select '||col_select_list||' from '||tabname||' tab1,('||select_list_ver1||' minus '||select_list_ver2||' ) tab2 where '||col_list_tab1||'='||col_list_tab2||' and tab1.version in ('||current_version||','||previous_version||')';
open c_get_diff for stmt_row_val;
loop
fetch c_get_diff bulk collect into t1;
for cnt in t1.first..t1.last
loop
htp.tabledata(t1(cnt));
dbms_output.put_line(t1(cnt));
end loop;
exit when c_get_diff%notfound;
end loop;
close c_get_diff;
end get_difference;
begin
htp.htmlopen;
htp.bodyopen;
htp.tableopen(cattributes=>'border="2",bordercolor="BLACK",width="60%",align="CENTER"');
htp.tablerowopen;
get_header(tabname);
htp.tableheader('Remark');
htp.tablerowclose;
htp.tablerowopen;
get_difference(current_version,previous_version);
htp.tabledata('New/Modified');
htp.tablerowclose;
htp.tablerowopen;
get_difference(previous_version,current_version);
htp.tabledata('Deleted');
htp.tablerowclose;
htp.bodyclose;
htp.htmlclose;
end compare_data;
no errors are there but i am not getting the proper result mine expected result is
253.00 TT Null 11/1/2006 12/31/2099 Y
258.00 NBK Null 11/1/2006 12/31/2099 Y
but i am getting
258
258
can anyone help me out,why i am not getting the expected result.
values which i am using in the query to execute dynamically are
col_select_list:tab1.version, tab1.PPP_WCC_TYPE, tab1.PPP_WCC_PREFIX_TYPE, tab1.PPP_START_DATE, tab1.PPP_END_DATE, tab1.PPP_INDICATOR
col_list_tab1:tab1.PPP_WCC_TYPE||tab1.PPP_WCC_PREFIX_TYPE||tab1.PPP_START_DATE||tab1.PPP_INDICATOR
col_list_tab2:tab2.PPP_WCC_TYPE||tab2.PPP_WCC_PREFIX_TYPE||tab2.PPP_START_DATE||tab2.PPP_INDICATOR
col_list:PPP_WCC_TYPE,PPP_WCC_PREFIX_TYPE,PPP_START_DATE,PPP_INDICATORI wish I knew your application !!!
Maybe you are looking for
-
Ipod not being recognized by windows computer
I have a video Ipod and a older nonclick wheel type Ipod. Neither one will connect to my computer. Although last week they connected without any problem. Also my wife's Ipod mini connects correctly. I've uninstalled Itunes and reinstalled it. I reins
-
My iPhone 5 is disabled and the power button doesn't work. How would I fix it?
My iPhone 5 is disabled and the power button doesn't work. How would I fix it? Please Help
-
When I run sunstudio and I want to debug with Debug/Start Session/Run in debugger, I have the message "Exception occurred in Request Processor". If i show details, i have the messages : Annotation: Exception occurred in Request Processor java.lang.Nu
-
White stain on the sceen of Satellite P20
From some time, I have white stain at the bottom of my screen (they are not broken pixel) and they are enlarging progressively. Please see the pictures: http://cide.info/temp/Photo-0067.jpg http://cide.info/temp/Photo-0068.jpg I have already changed
-
How to install windows 7 Firefox without "Ask search" and other software?
I would like to install pure Firefox, lean without getting other add-on software, such as "Ask search". I am requesting download from Mozilla home page. Thank you for helping.