Safari problem after installing printer

This is the third printer I have installed on my imac. It is a Samsung all-in-one, as was my Canon an HP printers. A day after I installed the printer,Safari failed to connect to the internet. I have an Ethernet connection. I know the router and cable modem connections are ok as streaming video from Netflix works. Also when I reboot the internet connection isrestored for awhile then I lose it again. If I don't reboot, sometime later in the day the connection for Safari is re-established, then it might fail afain after the imac goes to sleep. I had never had the problem before I installed this Samsug printer.It is the SCX-3405FW. Could this be a virusof some kind?

More likely a coincidence rather than a virus (there aren't any). A few thoughts:
Do you have another browser installed you could use for a while, to see if it's a general network problem or just limited to Safari.
You could try resetting Safari - Safari Menu>Reset Safari.
Check Safari>Preferences>Advanced, click on Proxies and make sure nothing there is ticked (if it is, deselect it but make a note of what was ticked in case you need to re-instate it).
What happens if you operate for a few hours with the printer off/disconnected - does the problem go away?
Not sure of the value of this, but you could try resetting the printing system and then recreating the connection from the Mac to the Samsung:
http://support.apple.com/kb/HT1341

Similar Messages

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found?

32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

Problem after installing IOS 8.0.2

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Printing problems after installing OS X version 10.4.8

I reciently upgraded to OS X version 10.4.8. After doing so, my Dymo Twin Turbo Label Writter won't print. I also am having problems using my Epson RX700 All-In-One Printer Scanner where the scanner cannot be found.
Both of these printers worked flawlessly prior to this update in version 10.4.6.
I have tried re-installing printer drivers, deleting the printers and re-adding them and cannot seem to get them working correctly. I have even tried doing a printer reset from the printer setup utilities.
Does anyone know how to fix these issues?

Start by downloading the 10.4.8 Combination (Combo) Updater from Apple and re-updating.

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

Printing problem after installing Adobe Reader XI.

After installing Adobe Reader XI. I can not just print a document from email attachment without saving it to a "save the file as". Where before was able to just print the document. There is no reason I need to save these documents being printed. How do I get back to an older version that allowed me to do this?

Thanks for your response. I found the problem 1/2hr after posting my question. It had to do with the setting after hitting the print que. After installing the Adobe Reader XI the setting for destination in the print window change to save as PDF. Before it was set to my default printer. I never knew that there was other places for these documents could go. Never had to use them either.
Again thanks for responding.

Problems after installing Windows 7 Professional on Thinkpad T61

I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
Package ID: WindowsUpdateDiagnostic
Path: Unknown
Error Code: 0x8E5E0247
Source: Engine
I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
Any help with this will be appreciated.
Solved!
Go to Solution.

A laptop drive that size is almost certainly an AF drive. You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
http://support.microsoft.com/kb/982018
Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info. The entire KB may also be helpful.
If my guess is actually the problem you won't have to reinstall Windows 7. Just update - or roll back - the driver. You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again. If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system. Or just try the latest and if that doesn't work, try earlier ones.
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
Here's a local KB addressing this (presumed) issue: http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
To repeat, this is a bit of a guess. It's pretty likely that your storage driver is the culprit. Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver. Either way the corrrect driver should fix things.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Fix the: Cannot view PDFs in Safari Window after installing CS3

All,
To fix the problem of displaying PDF files in Safari after installing CS3.
Open Adobe Acrobat 8 and then go to the preference menu, on the left hand side look for internet, select this option and then UNCHECK the options to use to open PDFs.
Apply and quit Adobe Acrobat 8. Quit Safari if still running and then reopen. What Safari does now is use the default settings and will open the PDFs as before.

If it's not essential that the Adobe plugin handles PDF files then try turning off the plugin support via Adobe Reader preferences -> Internet -> Unselect the option to handle PDF files (sorry, I'm not on a Mac to quote the exact text but it's words to that effect).
If no other plugins handle PDFs, Safari should pick up the slack and handle them natively.

Safari problem after installing printer

Similar Messages

Maybe you are looking for