Safari suddenly stopped working

Safari suddenly wont connect to internet. I have reconfigured the network setting to no avail. The airport utilily is not able to find the wireless device/network. By the way other devices does not have prob connecting to the router.

Hum.... have you tried the forums for say Safari, Airpot, Snow Leopard, even MacBOOK Pro?
http://www.apple.com/support/airport/
http://www.apple.com/support/sitemap/

Similar Messages

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

hi

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated.

Firefox suddenly stopped working blocking evenb safari- why? what has gone wrong, under feed back ?http?

Firefox suddenly stopped working with Mac OS 10.6.8- keeps blocking even Safari- will jot download , open pdf file downloads-- wasted a lot of time of several University experts- we can't locate work out why- x3 quit everything, download, reinstalled twice, machine switch on/off- something seriously wrong and wasting alot of time.
It had been working faultless for years- recently iMAC 1TB disc was changed by Apple under their programme of exchange for 'free'- it has not worked since!!!!
Many thanks

On PDF issues, disable the Adobe Acrobat plugin so that PDFs open in Apple's own native PDF reader instead.
Firefox menu bar: Tools > Add-ons > Plugins category
I don't understand the part about blocking Safari. Can you describe that problem in more detail?

Safari has suddenly stopped working on my iMac. I can access it on my iphone and ipad.

Safari has stopped working on my iMac. The error message says: "Safaru quit unexpectedly. Click reopen to open the appication again." When I click reopen, nothing happens.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Windows 7 64-bit: Safari has stopped working

Help needed! I am one of those guys that has to use a Windows machine at Work. So I have a Windows 7 64-bit OS on my work laptop. I use Safari at home on my Macs. Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working." I have uninstalled Safari, manually cleaned up all the Safari folders that go into user account preferences, ran a registry cleaner via WinUtilities so that all traces of Safari are gone. Then did a fresh install with Administrator privileges (I even tried the install with my own login ID) but either way the result is the same -- Safari 5 crashes at random. What can I do to make Safari 5 on Windows 7 stable? Please advice.
Thank you!
TS

Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working."
Fingers crossed, the problem reports for those errors might cast some fresh light on the source of the problem.
Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent ... the Action Center?) and look for recent Safari problem reports. Open them up and look through. Do they all seem to be saying the same thing? If so, paste the contents of a typical problem report into a reply here so we can have a look.

Airport woes - suddenly stopped working

I’m unfortunately currently having Airport issues, and was hoping to get some help. My wireless network has been running fine for a while, but yesterday evening it suddenly stopped working. I could see and join my network, but it wasn’t working. When I connected my computer directly to my modem via Ethernet, it worked fine. I rely on wireless a lot though, so I unplugged and plugged everything back in, but it didn’t solve anything. Eventually, I decided to reset my Airport Extreme and Express (used as WDS) base stations and start over. I set everything up (standard set up, Extreme with Express as WDS), and my connection started working again. After about half an hour though, my internet went down again (just like before, I could see my network, but it didn’t work)
I tried unplugging everything again, but that didn’t help matters. I decided to try a reset again, but unfortunately this time around, that didn’t work either. When I check the network part in the system preferences, it says I am connected to the internet over Airport (green light shows), but I Safari loads for a few seconds and then tells me I’m not connected to the internet. I thought there may be something up with my DNS settings, but I checked them and everything is entered correctly. I reset everything a third time, thinking there might be something wrong with my Extreme base station (I even tried going back to default firmware but that didn’t help), and just used my Express station. Unfortunately, that didn’t work either (I get a green light on my Express base station, but it just won’t work). That is when I gave up. I tried again one final time this morning and am still getting nowhere.
The odd thing is, I haven’t changed anything…I don’t know why it would suddenly stop working. I hadn’t changed any settings, or messed around with the firmware or anything. I’ve been on the latest Extreme/Express software updates since a couple of months ago and have had no issues whatsoever. When connected directly to my modem, my internet connection works fine – so I’m assuming it’s not an issue with my ISP (UK Online). Since I can’t get both my base stations to work, I’m also assuming there isn’t a physical issue with them. FYI, these base stations are the old ones, not the new 802.11n ones.
Does anyone have any ideas as to what may be up and/or any suggestions as to what I could try?
Many thanks.
P.S. I am on OSX Tiger, latest update.

It's always a good idea to completely power cycle the entire network after any changes or updates to a network.
If you have not already done so.......
Power off everything....all devices....order is not important
Start the modem first and let it run for a minute or two by itself
Start the next device connected to the modem the same way
Start the Airport Express the same way
Start each computer and device one at a time about a minute apart
Check the network for proper operation

Internet Suddenly Stopped Working

Hi,
My eMac, running 10.2, suddenly stopped working with my Internet. It shows my router, but when I open a browser, it says it can't find the server. However, my iTouch and laptop can both load with the same router and modem. Does anyone know what I should try to fix this? I didn't open up the case or anything and have tried Safari, Firefox and IE. None have worked.
Thanks

There are various glitches that occur with internet connections. My first suggestion is to disconnect the power to your router, leave for about 10secs then reconnect the power. This resets the router and its link to the ISP and sometimes resolves such problems. If this works the problem might still recur at times but at least you can get up & running again.
I would also suggest that you check with the router manufacturer's website for a firmware update for your model and instal this. This software is part of the router's internal operation not part of your computer's software even though the upgrade is usually done through one of your computers.
If these don't help I suggest you consider software maintenance/upgrades for your eMac. Various software components, eg preferences, can become corrupted and need to be replaced/upgraded from time to time.
Neville

Help! Safari Autofill stopped working for no reason.

My Safari autofill has suddenly stopped working. It used to be that when a form came up on safari I could start filling it out and hit tab and it would fill in the entire form. Now it looks like it might fill in that line, but if I hit tab it doesn';t even complete the line that is highlighted. I think this started to happen after I did the latest OS X software update -- I am now running 10.4.11. I checked autofill on safari and it seems to have all the appropriate boxes checked. And if I go to the pull down menu and pull down edit and do autofill forms, it will do it. But why won't it do it using tab any more?
thanks so much,
Katarina

Hi Klaus
Thanks for the welcome and offer of help -- much appreciated.
OK, here's the info you asked for:
2010-01-14 11:43:02.875 Safari[194] An uncaught exception was raised
2010-01-14 11:43:03.129 Safari[194] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
2010-01-14 11:43:03.130 Safari[194] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
Jan 14 11:43:41 user-users-Vindaals crashdump[202]: Safari crashed
Jan 14 11:43:47 user-users-Vindaals crashdump[202]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log
2010-01-14 19:20:54.056 Safari[313] An uncaught exception was raised
2010-01-14 19:20:54.094 Safari[313] * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
2010-01-14 19:20:54.094 Safari[313] * Uncaught exception: <NSFileHandleOperationException> * -[NSConcreteFileHandle readDataOfLength:]: Input/output error
Jan 14 19:22:52 user-users-Vindaals crashdump[324]: Safari crashed
Jan 14 19:23:16 user-users-Vindaals crashdump[324]: crash report written to: /Users/useruser/Library/Logs/CrashReporter/Safari.crash.log

Java in suddenly stopped working. Help?

Java in suddenly stopped working. Get "inactive plugin". Things were fine yesterday. Checked Java preference and everthing looks fine. Running os 10.6.8. Does anyone have a fix?

The recently released Java 7 Update 11 has been blocked by Apple through its XProtect anti-malware feature in OS X.
Oracle issued the latest update to Java earlier this month to fix a serious zero-day security flaw. The threat was so serious that the U.S. Department of Homeland Security had recommended that all Java 7 users disable or uninstall the software until a patch was issued.
Apple took action on its own and quietly disabled the plugin through its OS X anti-malware system. And as noted by MacGeneration on Thursday, Apple has again updated its OS X XProtect list, this time to block Java 7 Update 11.
Because Oracle has yet to issue a newer version of Java that addresses any outstanding issues, Mac users are prevented from running Java on their system.
Over the last few years, Apple has moved to gradually remove Java from OS X. The Mac maker dropped the Java runtime from the default installation for OS X 10.7 Lion when the operating system update launched in 2010. Java vulnerabilities have been a common exploit used by malicious hackers looking to exploit the OS X platform.
Most notably, the "Flashback" trojan that spread last year was said to have infected as many as 600,000 Macs worldwide at its peak. Apple addressed the issue by releasing a removal tool specifically tailored for the malware, and also disabled the Java runtime in its Safari web browser starting with version 5.1.7.
Javascript should not be disabled (it has nothing to do with Java).

My Safari Has Stopped Working!

My Safari Browser stopped working after a sudden power outage in our area. I have tried re-installing Safari, re-installing my SBC-Yahoo DSL Modem Software, resetting my DSL modem and nothing works. When I launch Safari the only message I see is "Go To This Address" in the address bar and the pinwheel spinning. What can I do to fix this?

Hi,
Try this:
http://discussions.apple.com/message.jspa?messageID=9321608#9321608

Photoshop CS4 64bit suddenly stop working

Having problems with Photoshop CS4 64bit version stop running for me giving me this error message with these details:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    11.0.1.0
Application Timestamp:    499bfd16
Fault Module Name:    StackHash_0b5f
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5be02b
Exception Code:    c0000374
Exception Offset:    00000000000c6cd2
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    4105
Additional Information 1:    0b5f
Additional Information 2:    0b5f2ed00a0371f4956b3b2a23be79e0
Additional Information 3:    a274
Additional Information 4:    a2747fd43e73092b139f32555a88633d
It seems when i do something simple as typing text, it'll stop working and give me a "Adobe Photoshop suddenly stop working". My CS4 32bit version seems to working fine with whatever i'm working on. I'm running a fresh install of Windows 7 64bit Ultimate on a new computer Intel quad core with 4gig of ram if that helps. Sorry if this have been asked before but i couldn't find anything on these forums. Thanks in advance.

i deleted the prefs file and now i can open photoshop. but it seems as if it crashes if i open ANY file with ANY text, no matter what the font is.

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Safari 5.1.5 on PC. Windows 7 64 bit. My favorite browser is not working. Please help. I keep getting a window in the middle of a page saying ''Safari has stopped working'''''

Hello.
My favorite browser Safari (5.1.5 ) has stopped working. Yes I know is on a PC. But is been very good to me for a long time, untill about two months ago. I keep getting a pop up message saying "Safari has stopped working" I will close the pop up message and continue working but within a few minute, the message will pop up again. The browser opens up fast as always and runs fine but the message is a pain and annoying. I'm running Firefox now , but I want my Safari back . Please help.
Jonasfromdc

Thanks. b noir. For the quick reply post.
b noir wrote:
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name:          BEX
Application Name:          Safari.exe
Application Version:          5.34.55.3
Application Timestamp:          4f6ba239
Fault Module Name:          StackHash_7100
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          7d3a1240
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional Information 1:          7100
Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
Additional Information 3:          5158
Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID:          2871481836
I generated the problem report similar to the above screen shot " by way of IE 9 " but will not let me copy and paste the contents as a screen shot in reply to your post here . Copy to clipboard did not work either. I might be doing something wrong. Oh well.
By the way , the only difference is- The Problem Event Name of mine is not BEX. but rather : APPCRASH. Fault Module Name : JavaScriptCore.dll. Fault Module Version: 7534.55.2.1. The rest are very similar to the above screenshot. If you need more information then I guess I have to do it all manually. Please let me know. Thanks again.
Jonasfromdc.

Satellite L300 suddenly stopped working - new motherboard needed

My Sat L300 suddenly stopped working the other day.
It kept freezing to start with, then nothing at all. So, I kill-disked the HDD and tried to re-install Windows (XP).
During the install it threw up a message that some internal components had been incorrectly installed and needed to be reinstalled.
I was told to remove the memory cards and re-seat them.
That did not work. I thought that perhaps the HDD was damaged, so I fitted a new one, and started to reinstall Windows.
Once again, same message. One of my colleagues at work suggested that the Motherboard was probably U/S.
So I have been trawling the .net to find a replacement. Laptop out of warranty! I am told that some other serial numbered motherboards will work with this laptop. Don't really want to get a motherboard only to find its never going to work! My unit has an SPS number of: V000138330.
I am being offered one with an SPS of: V000138390.
Any ideas? Will this one work?
And if it does, will it give me the functionality that I used to enjoy?!
Sorry for the long sob story.
Any advice gratefully accepted.
ANDY-N

Hello Andy
Sorry but can you tell us more about your notebook? which model do you have exactly (L300-xxx)?
Do you have European model?
Has your notebook valid warranty?
Maybe I have misunderstood something but why you want to exchange mainboard if the warranty is probably still valid?

Safari suddenly stopped working

Similar Messages

Maybe you are looking for