Sales area creation for existing customer

Hi Guru's,
Good Day to all.. .
Here my requirement is i need to update the customer data in KNVV table based on below conditions.
My Selection screen is
Customer :
Sales Org :
My checks are...
The program has to check if each inserted customer (select options) is opened on all the sales areas based on the inserted sales organizations (salesorganization + Distr. Channel = “FF” + Division = “AA”/”BB”/”CC”/”DD“).
If the involved customer isn’t created on all the sales areas (select options) it must be automatically opened on the missing ones.
It means before creating i need check that customer is available in the above mentioned divisons or not.?
If customer is not available with the above divisions i need to create a new reocrd with missing division (remaing field values are same only diviosion will get change)
For this do we have any BAPI's . I have checked few but i could not find the correct one.
Can anyone please help in this regards.
Thanks in Advance
Sravan Kumar

Hi there,
Customer master data will usually have external num assignment where you will give the customer num manually. If that is the case, create a new customer master ABCD in VD01 for sales area 1000 / 01 / 01 for eg. If you want to extend the same customer to a different sales area, then in VD01, give the custromer name ABCD & give new sales area details 2000 / 02 / 02. Then ABCD will be extended to both sales areas. But make sure that you assign the shipping / billing & partner data accordingly.
Same way if you want to extend the customer to different company code. You do it in XD01.
Is this what you asked?
Regards,
Sivanand

Similar Messages

Problem in Customer and sales Area assingment for STO

Hi Gurus,
I am working on STO cycle , while config. of STO in first step when i assinged customer and sales area to plant in NODE
"Define Shipping Data for Plants" ,here i can assinged only one customer belongs to only one Sales Area.
For Eg :- 1000/10/00 is my sales area and customer is 01
I assinged this to plant SID.
Now if i want to assinge different sales area for the same customer , Because STO will not ne happened only for one Division , it will transfer goods from many division from a single plant ,So how can assinge more division or more than one sales area to a single plant.
If through COMMON DIVISION , this problem is resolved please explain ,How means step. Because i want to assinge min 10 sales area to asingle plant means may be have to create common division funada, But how I m not getting.
Please Reply ASAP.
Devdatta Joshi

Dear Joshi,
1.First you do the common divisions and distribution channels through the t.codes VOR1 and VOR2.
2. You assign common sales area to the suppliying plant which you have difined in the common divisions and distribution channels.
i.e you maintain one division and one distribution channel as reference to all other divisions and distribution channels.
3.The purpose of the assigning sales area data to suppliying plant is, we are allowing the system to sale or transferinmg the goods from that suppliying palnt.
I hope it will help you
Thanks,
Murali.

Add new tab under 'Sales Area view/Data' of Customer Master TransactionXD01

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Can we activate the Sales Area Tab for Prospect?

Hi all
My client requirement that
When ever we creating a Sold to party subscreen sales area will be activated, for the same can we activate sales area tab for Prospect is it possible?
Help to implement this.
Regards
sathish

Hi Satish,
Your requirement sounds very un-usual to me. Sales area data will only be seen when sold-to is maintained.
I don't see any requirement why a prospect is to be maintained in a sales area, especially when he/she is not yet started any relation with sales organizational data.
It is better to promote a prospect as customer as and when required, rather than implemeting a complex code changes. Give a try to convience your business.
This is my general comment and not debating on your requirement.
<b>Reward if helps</b>
Regards,
Paul Kondaveeti

Extending Sales Area data for a Business Partner

Hi CRM experts,
I searched the forum but couldn't find a thread that I'm looking for..
I've a query regarding the extension of Business Partner to a new Sales Area in CRM. In R/3 we can provide reference sales area and extend the customer to a new sales area. This will copy all the relevant sales area fields' data to the new sales area in R/3. Do we have similar option in CRM? If not what is best method to extend large volume of Business Partners from one Sales Area to a new Sales Area?
Any pointers around this will be helpful.
Thanks,
Charan

Hi,
In the BP go to Sales Area Data and select sales tab. In that select the sales Org,D.Channel,division for which you want to maintain and enter all the detail in all the tabs (shipping,Sales,Billing etc) and save the BP.
Regards
Vinod

Importance of Sales Area Data for BP

Please give me the various reasons for having or maintaining Sales Area for a Business Partner:
_Explanation:_ What is the importance of maintaining Sales Area Data for BP.Please list out several points.
As we know Sales Area is composed of : Sales Organisation, Distribution channel, & Division.
Thanks & Regards,

These are off the top of my head. I can reply a bit later to add some more.
1) The pricing procedure (entered in the Billing Tab) which affects the LEAD, OPPT, AG, QCTR, and TA documents. Without the pricing of the product, the transactions cannot be executed and the total product value cannot be determined. Without a total dollar value, a TA doesn't make sense.
2) The S.O defines the legal terms for the product and if the BP wants to return the product they ordered, they have that information.
BB

Dump during sales order creation for a config material (uding order BOM)

Dear all,
I am getting the following error during sales order creation for a configurable material
When I click on 'Engineering' tab in the characteristics value assignment for the parent material i.e. sales order material I get dump with following message,
'Field symbol has not yet been assigned'
Thanks,
Yogesh

Yogesh,
what was the problem ?
Thanks,
Pavan Verma
Edited by: Pavan Verma on May 11, 2010 9:31 AM

How to Extend Sales Area data for a BP

Hello Experts,
I am working on CRM 7.0 and the requirement is to add a new new field in Complaints Tab in Sales Area Data screen of Business Partner in GUI as well as WebUI.
Question-> Can we add the new field in WebUI using AET? Does it supports extension of relevant Assignment block(Sales Area data->Complaints and Returns)? If yes then how can we add the same field in GUI after that? If not then what is the alternate solution and Can we use BDT to fulfil this requirement?
I assumed that EEWB does not supports extension of Sales Area data for a business partner. Please let me know if I have got it wrong.
Regards,
Amit

You can use AET to extend the sales area data of BP. However, it wont add the fields automatically in GUI, But the generated fields are available in the relevant DB tables.
BP GUI transaction is no more supported . Im not sure why you want to work on GUI.
Regards,
Shaik

Automatic creation of Company Code and Sales Area Data for Customer Master

Hi,
We have a organisation structure setup with multiple company codes and sales areas.
A customer will be created using VD01 via the Sales Order VA01. Because the customers are created using VD01 we need to automatically extend the customer for the various company codes and sales areas. The data on these views will be populated using reference customers.
Any recommendations on the best approach (technically) to auto extend the customer master would be appreciated.
I'm reluctant to use BDC's because of performance. We are in a Retail environment.
Thanks in advance
Craig

The sample code has been taken from the SAP notes - in which have the affected as outlined in the example.
The codes does not do what my requirements are, which is to identify the next available number in isolation of the BP type.

Sales Area check for custom partner function

When processing sales orders in our system, it does not check the sales area for the customer of a custom partner function. Can this be setup via config or is there a an exit that can be used for this.
Thanks,
Roy

Yogesh -- Thanks for your response. However, it does not address the functionality issue.
Currently, I created new partner function ZZ (for example).
I assigned this partner function ZZ to account group Z000.
I created new partner XYZ in account group Z000, in sales area XX00/XX/XX.
I created a sales order in sales area YY00/YY/YY.
Problem is that system allows me to assign partner XYZ to this sales order.
How do I prevent this?
How do I enfore that system will only allow partner XYZ in the sales order, if the partner is created in the same sales area?
Edited by: krist d on Dec 13, 2010 4:33 AM

Sales order creation for a project

Dear all,
I would like to know how to create quotation ,sales order, delivery and Billing for a total project. Let me explain the situation.. Customer has 4 different product.. they have 4 Plants to produce those materials.. They will sell each products individually and combination of others also. Their sales process is Customer will place an order for the total project which involves supply erection and Training. The erection and training may take 3 months to 1 year. The requirement is customer wants to create quotation and sales order creation in SAP. Also they want to map the erection and Training in SAP. They would like to capture the expenses involved during the erection and Training period. In this case excise duty, Sales Tax and service Tax all are involved in the same project.
Can any one suggest some idea
Thanks in advance
Sriram

Hi,
It is understood that your client has 4 plants for 4 different materials. Your client sells materials and service (1.Installation of equipment and 2.Training the users). Your client wants to know the cost of the sold items (Materials and services). The billings are subjected to all applicable taxes.
As you know, these requirements can be mapped in SAP by SD and PS modules.
SD Module: Whatever the customer places the order (either partially or as total), you can create quotations. The materials are finished goods (FERT) and service materials (DIEN). The pricing procedure should consider all applicable duties and taxes.
The business flow: Quotation >> Sales order >> Delivery of goods >> Billing (VF01) >> Excise Invoice >> Account receivable.
Note: To link the sales order with PS module you have to maintain respective u2018WBS Elementu2019 in the Account assignment tab of the sales order. This is used for planned revenue in PS.
Since you are supplying goods from all plants, maintain all plants to Sales organization and distribution channel combination in Assignment of Enterprise structure.
PS Module:
If the customer orders for an entire project including supply of materials, installation and training the users, create a project definition for that project in the project system. Assign a main WBS element under the project definition. Assign lower level WBS element according to your need. Under the WBS element network is assigned. Under the network activities are assigned. Under the activity there are activity elements. There are different types of activities; internal, external etc.
You can assign different WBS element for services. Under this the relevant activities are assigned.
You can budget for the project; you can assign supplementary budget if it is required.
When you release the project the Purchase requisitions are generated. The MM persons will create PO and procure the materials for the project.
All the materials required are initiated from PS. Here every activity is routed through PS including service. So, all the expenses are captured.
By settlement rule, the cost is arrived at different levels.
The configuration is to be done accordingly.
Hope this give you an idea on the subject.
Regards,
K Bharathi

Restricting Sales Order Creation for Customers with specific AccountGroup

Hi
We have 2 Accont Groups for Customers namely Actual & Prospective.
We wish to allow Enquiry / Quotation and Order creation for customers with Account Group ACTUAL and wish to allow only Enquiry and Quotation creation for customers with Account Group as Prospective.Is there anyway i can apply Sales Order creation block on an ACCOUNT GROUP on whole and not on Individual customers...
Regards
Sanjeev Bagaria

Hello
I did this through Listing Inclusion / Exclusion.
(1) We created a new Customer Group 99 for Prospective Customer
(2) We then created a new Condition table xxx with Customer Group & Material Type(as footer)
(3) We then created this new Access Sequence Customer Group / Material Type to Exclusion Procedure B00001
(4) We then assign the Exclusion Type B00001 to Sales Documents ZDOM & ZEOR our Order Sales Documetn Types
(5) And finally we created a record for Exclusion with 99 Customer Group and Material Type as FERT..
This now restricts creation of Sales Orders for all my Prospective Customers provided Customer Group is maintained in Customer Master. We are now also able to make Enquiry / Quotation and Sample Sales Order for Prospective Customers sicne we have Different Sales Document Types for all these and have assigned Exclusion only to normal Sales Order Document Type.
Thanks a lot for all the suggestions provided.
Regards
Sanjeev

Sales Area Creation

Hi Everyone,
I have a problem here and appreciate if somebody can help me.
I created a sales area 9090/90/90
When I try to create a customer master with VD01 and click on All Sales Areas, my sales area shows here as 9090/01/01.
Where am I going wrong.

Hi
In VD01 the sales area you see is the one customer is created for..if you want to extend it to the new sales area
You've to key in the sales area manually and create it.
Regards
Raghu.

Sales area check in backend customizing not activated - MDSD not possible

HI,
While working test cases for upgrade to ECC 6.0 we encountered error message /DSD/ME 070 "Sales area check in backend processing not activated -> MDSD not possible" while trying to create a customer via an intranet application. I have searched forums, OSS messages, the DSD configuration guide, SAP help, and everything else I can find and have found nothing.
Can someone please point me to proper configuration setting?
Thanks
Steve

Hi Steve
Maybe is a problem in customizing. In SPRO --> Logistics Execution --> Direct Sttorage Delivery --> Basic Function --> Activate single Sales Area Processes.
Mark the flag and test.
Regards, Jenny

How to get Sales rep information for each customer

Hi
For each record in ra_customers, I want to find associated Sales rep for each customer.
Can some one please tell me what table stores this information?
Thanks
Aali

Try
SELECT rc.customer_name, rc.customer_number, jrs.NAME
FROM jtf_rs_salesreps jrs, ra_customers rc
WHERE rc.primary_salesrep_id = jrs.salesrep_idHope this helps,
Sandeep Gandhi

Sales area creation for existing customer

Similar Messages

Maybe you are looking for