Sales area check in backend customizing not activated - MDSD not possible

HI,
While working test cases for upgrade to ECC 6.0 we encountered error message /DSD/ME 070 "Sales area check in backend processing not activated -> MDSD not possible" while trying to create a customer via an intranet application. I have searched forums, OSS messages, the DSD configuration guide, SAP help, and everything else I can find and have found nothing.
Can someone please point me to proper configuration setting?
Thanks
Steve

Hi Steve
Maybe is a problem in customizing. In SPRO --> Logistics Execution --> Direct Sttorage Delivery --> Basic Function --> Activate single Sales Area Processes.
Mark the flag and test.
Regards, Jenny

Similar Messages

Customer Master Record :Sales area INSO IN IN is not defined for customer

Hi Experts
I got error , when creating Customer Master Record .The error message likes below
"Sales area INSO IN IN is not defined for customers" .I maintained all the settings .But why i am getting again and again the same error .Even i checkd in TVTA table in SM30 but is shows clear data , please tell me where i made mistake .
I traid so many times maintain with new configuration ,but still field .Please what i have to done to over coome this issue .
Your Suggestions needful to me .. Please
Issue Details :
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
Regards
Rajesh .P

Maintain relevant entries in t.code VOR1 and VOR2 and then try again. Here assign the distribution channels and divisions to reference distribution channel and division.

Sales area check in quotation creation (VA21)

Hi
When we process quotations in our system, it does not check the sales area for the customer or the material. Hence we can create a quotation in a sales area for which a customer/material is not registered. No error message is given. This causes problems when creating the order with reference to the quotation because the sales area is copied across.
Is there any way we can get the quotation to check the sales area without putting custom code in to a user exit? In other words, is there some piece of config missing?
Thanks
Jon

Hi
The problem is not with the customer, it is with the material.
My customer is set up in sales area:
Sales org 0100, Dist chl 10, Division 10, as well as 0100/10/25.
The material in question is only created within division 10.
However, I can create the quotation using VA21 in sales area 0100/10/25. This sales area gives me the wrong division for my material. I always assumed that the sales area was checked against the customer and material before being allowed - for example if I process an order in VA01 (without reference to a quotation), and use the same customer and material combination in sales area 0100/10/25, SAP issues message V1370 ("Division 25 in the header deviates from division 10 in the item").
Jon

Sales area VNMH 01 02 is not defined for customers

Dear sir.
I have some questions, help me.
I'm creating a customer, but I have an error " Sales area VNMH 01 02 is not defined for customers".
I want to create plants, but I don't know the path.
Finanly, how to create branches, departments, storages
Help me deal the problem.
Thank you very much.
Regard,
Hangvt

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD AB AB
Common division
ABCD CD CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

Sales area JI00 JI JI is not defined for customers

i created enterprise struv for SD
DIVISION     JI
Plant     JI00
Sales Organisation     JI00
Dist Chan     JI
Divi     JI
Sales Office     JI00
Sales Grp     JI0
Stor Loca     JI00
Shipping Point     JI00
Company Code     0001
and all necessary assignmnets done successfully and consistency chk also , it is OK'
now i am creating custoemr in XD01 then i got an error as Sales area JI00 JI JI is not defined for customers
pls guide me wat to do, i am not done any other settings except i mentioned

Hi,
please check the following customizing:
- transaction SPRO
> SAP Customizing Implementation Guide
> Enterprise Structure
    > Assignment
      > Sales and Distribution
        > Assign sales office to sales area
> Sales and Distribution -> Master Data
          > Define Common Distribution Channels and Common Division.
- Transactions need to also be checked and maintaained if neccessary:
     -> OVXG: Define sales area
     -> VOR1: Joint Master Data: Distr. Channel
     -> VOR2: Joint Master Data: Distr. Division
Kind regards,
Zsuzsanna

Sales area ABCD CB AB is not defined for customers

Hi Guru,
              When I was trying to create customer T-CODE: XD01
Getting following error:
Sales area ABCD CB AB is not defined for customers
I am working on ECC6.
could you please help me out?
Regards,
sha

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD     AB     AB
Common division
ABCD    CD      CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

"Sales Area zzzz zz zz is not Defined for Customers"

Hi All
         I am trying to create a customer using XD01. In my org structure there is only one sales org, one dist channle, one division and hence One Sales Area zzzz zz zz which I have set up in IMG. The Error I am getting is
"Sales Area zzzz zz zz is not Defined for Customers"
And Peformance Assistant gives the following message
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
I have already checked that
1)My Sales area has been defined and Sales org is assigned to company code, Dist Channel and Division is assigned to Sales Org
2)In Table TVTA my Sales Area Exist...
3)I have tried creating my sales org by copying IDES sales org as well as creating a NEW sales org...however the error is still there
Any Ideas???
Thanks
Raj

Hi!
   This error is coming due to assinment is not made for common Divisions. You can assign this by going to SPRO>S&D>Define common divisions. Here you assign sales org ZZZZ , division ZZ, division for conditions ZZ, division for Customers ZZ. Then try to create customer master for ZZZZ ZZ ZZ .
This assignment for master data can be created in one sales area and that can be referenced to other sales areas also without creating again.Read the help below for details.
Define Common Divisions
     In this step, you define the divisions that common master data should
     apply to. The definition is valid within each sales organization.
     Example
     You can determine, for example, that the conditions which are valid in
     division "01" also apply to divisions "05" and "06".
     Note
     The common master data across various divisions refer to the conditions
     and the customer master data.
     You thus minimize the effort of entering and managing master data.
     In addition, you can extrapolate your own statistics per division
     without having to create master data in the different organizational
     subareas.
     Action
     For the divisions, define from which other division the master data
     should be copied.

SALES AREA MPPS MP LP IS NOT DEFINED FOR CUSTOMERS

At present I am working on integration of FI module with SD.When I am tryng to create Customer Master Record I am getting the error message "SALES AREA MPPS MP LP is not defined for customers".MPPS , MP , LP are sales org,dist channel,division created by me.Plase give solution.

Maintain common distribution channel & common division using transaction codes VOR1 & VOR2.

Add new tab under 'Sales Area view/Data' of Customer Master TransactionXD01

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Hi,
I want to add a new tab under 'Sales Area view/Data' of Customer Master Transaction XD01.
Is there any screen exit for XD01/XD02/XD03?
Or will I have to go and change SAP screens?
Thanks in advance.
Srinivas P
9663397476

Sales Area check for custom partner function

When processing sales orders in our system, it does not check the sales area for the customer of a custom partner function. Can this be setup via config or is there a an exit that can be used for this.
Thanks,
Roy

Yogesh -- Thanks for your response. However, it does not address the functionality issue.
Currently, I created new partner function ZZ (for example).
I assigned this partner function ZZ to account group Z000.
I created new partner XYZ in account group Z000, in sales area XX00/XX/XX.
I created a sales order in sales area YY00/YY/YY.
Problem is that system allows me to assign partner XYZ to this sales order.
How do I prevent this?
How do I enfore that system will only allow partner XYZ in the sales order, if the partner is created in the same sales area?
Edited by: krist d on Dec 13, 2010 4:33 AM

Sales area creation for existing customer

Hi Guru's,
Good Day to all.. .
Here my requirement is i need to update the customer data in KNVV table based on below conditions.
My Selection screen is
Customer :
Sales Org :
My checks are...
The program has to check if each inserted customer (select options) is opened on all the sales areas based on the inserted sales organizations (salesorganization + Distr. Channel = “FF” + Division = “AA”/”BB”/”CC”/”DD“).
If the involved customer isn’t created on all the sales areas (select options) it must be automatically opened on the missing ones.
It means before creating i need check that customer is available in the above mentioned divisons or not.?
If customer is not available with the above divisions i need to create a new reocrd with missing division (remaing field values are same only diviosion will get change)
For this do we have any BAPI's . I have checked few but i could not find the correct one.
Can anyone please help in this regards.
Thanks in Advance
Sravan Kumar

Hi there,
Customer master data will usually have external num assignment where you will give the customer num manually. If that is the case, create a new customer master ABCD in VD01 for sales area 1000 / 01 / 01 for eg. If you want to extend the same customer to a different sales area, then in VD01, give the custromer name ABCD & give new sales area details 2000 / 02 / 02. Then ABCD will be extended to both sales areas. But make sure that you assign the shipping / billing & partner data accordingly.
Same way if you want to extend the customer to different company code. You do it in XD01.
Is this what you asked?
Regards,
Sivanand

Sales Area Fields Mandatory Dialog Box not coming up

Hello Forum,
We have the Business Partner PCUI Application - CRMM_ACCOUNT, where in, there are mandatory fields made under Tab General Information and Sales Area. We have done the necessary changes in field grp settings and generated the layouts. for relevant field groups.
When we create New Business Partner, the control is on the 'General Information' TAB. PCUI doesnot allow to save the business partner, unless, mandatory fields are filled out. It gves a Javascript Popup to fill the mandatory fields.
But the same is not the case with Sales Area Tab, When we select Sales Area (Either by using Template Functionality or Selecting the Sales Area Manually), the fields in this TAB strangely remain in Readable Format only. No Changes are allowed to be incorporated. In this case there is no dialog box prompting for filling the mandatory fields. Also, it allows to save business partner w/o filling the sales area data mandatory fields.
However, when we save, Change The Tabs (I.e. Goto General Information and come back to Sales Area Data, it sometimes enables the fields for Entry under Sales Area). And then it starts doing the mandatory field check in Sales Area Tab.
Request, if anybody can provide, clues for this behaviour and resolution.
Regards
Tushar Kansara

you must modify '''browser.chrome.toolbar_tips'''
type in the address bar '''about:config'''
then press the button''' i'll be careful i promise'''
then type in the bar '''browser.chrome.toolbar_tips'''
then '''Double-click''' on it, to make it''' false'''
exit firefox and restart-it.
See for more info : [http://kb.mozillazine.org/Browser.chrome.toolbar_tips Browser.chrome.toolbar tips ]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Entity Attribute Existence Check - Query Result Parameter not possible ?

I already read the section of the ADF BC Developer Guide (9.6.2 Implementing an Efficient Existence Check).
That works and maybe is the best solution, however I am working with a group of Forms Developers which are much more comfortable with writing SQL statements.
Natural thing for them in this case was to define a declarative compare validator with the following Query Result:
select PROD_ID from Products where PROD_ID=:ProdId
where :ProdId is ServiceRequest.ProdId
Is this possible with ADF BC ?
Other possibility is to define a List Validator with the following Query Result:
select PROD_ID from Products
but this is not performant.
I know the programmatic approach is always possible, but to make migration easier for Forms developers into the ADF BC world, the declarative SQL option should be available.
Thanks,
Claudio.

This isn't possible out of the box in 10.1.3 since we don't support a mechanism to set the values of the bind variables. In 10.1.3, you would need to build a custom validation rule class (explained in section 26.9 "Implementing Custom Validation Rules") to make this declarative for others on your team.
I wouldn't recommend the list validator in 10.1.3 for anything but the most trivial uses. This is because it's current implementation retrieves all rows from the query, then does the attribute comparison in memory.
Among many, many other enhancements, we are greatly enhancing declarative business logic features of ADF Business Components for our 11g/Fusion release (the next major release), where this will be super-easy.

How to delete a Customer in its SALES AREA?

Hi All,
I've deleted a Customer by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi Gandalf,
not possible.
Note 725857 provides some reference coding for your own program.
Regards,
Joosz

All the pricing conditions are not visible for a given sales area, material

Hello All,
There is a customized screen with sales area(Sales org, distribution channel and division), material and sold to party. There is buttton when we click it has to display the pricing conditions. The problem here is it is not displaying all the conditions some conditions like ZB02 and MWST are missing. The Function module used is PRICING.
Whereas in VA03 tranaction for a sales order created with this sales area, material it is showing all the conditions for a item.
Please help me to solve this issue.
Many Thanks,
Rama

Hi
The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
DJ>> Hope the required sales area is available in CRM.
The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
DJ>> Please check the following -
1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area. Ideally it should get replicated if all you middleware settings are fine.
2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
Hope this will help
Regards

Sales area check in backend customizing not activated - MDSD not possible

Similar Messages

Maybe you are looking for