Sales doc copy control not working with price condition

Here's the situation.
For OR sales document I have  Procedure ZSALES and price conditions Z001
For a QT Sales document I have Procedure ZQUOTE which does not have a Z001 condition in that procedure.
If I create an OR (with the proper customer / matieral) the Z001 populates, based on it's defined record.
If I then create another OR with reference to the original OR, the Z001 populates with no problem.
Up to now everything's fine, now here's the probem......
If I create an OR with reference to a QT, the Z001 does not populate in the OR order.I know there is no Z001 in the QT for it to copy from, but if I do [New Pricing] in the order it still does not come in.(I've tried [new Pricing] with Pricing type A..G)
I have found OSS Note 413066, but this is in reference to 46c systems. we are on ECC 6.0
any ideas ?

Hi Bill,
If PP assigned for both are different it's not going to populate field even if you are redertermining price, since it would be following the PP of Quotation (ZQUOTE), not Sales Order (ZSALES) because it's gonna copy the elements of that PP in order. Are your PP assigned are same or different?
Hope this will answer your query
Regards
SD

Similar Messages

  • Re: EJB Control not working with methods that contain arguments

    John,
    I'm not qualified to answer your EJB control question, but before you
    become too disillusioned with page flows I'd like to mention that the
    request scoped data form and and the return-to="page" issues you
    mentioned have been addressed for the next service pack. We've
    introduced the ability to specify a page flow scoped form bean which
    lives for the life of the page flow, and we've clarified the return-to
    values to include both "currentPage" and "previousPage" which should
    clarify the expected behavior.
    I hope you give it a try.
    Thomas
    John Hundley wrote:
    Oh well guess you guys gave up on this one. Thats ok, I have utilized a workaround
    that forgoes your non working controls just like I have workarounds for your dataforms
    that do not maintain their data between pages, your retrun to page that does not
    work etc.... At this rate I should have just used struts and JBoss.
    "John Hundley" <[email protected]> wrote:
    oop's attached the wrong one here is the right one.
    "John Hundley" <[email protected]> wrote:
    Ok I have attached one of my beans.
    "Anurag" <[email protected]> wrote:
    John,
    For a stateless session bean, the ejbCreate() method is called for
    every
    individual method call. This is because the bean instance is returned
    to the
    pool after every method call, it does not hold any state.
    I am still surprised about the behaviour you are seeing.
    Can you just attach your stateless session bean. You need not sendthe
    dependent files, since we only want to sniff the call made to the stateless
    EJB method, and are not concerned with the implementation.
    Regards,
    Anurag
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Anurag,
    I am using the GA release. My control looks identicle toTraderEJBControl.jcx
    except of course it is extending a different home and bean interface.The
    bean
    itself does not exacly match the traderbean but it does look very
    similar
    to MusicBean.java
    in the tutorialsApp. One thing that has me a bit confused is the
    fact
    the
    create()
    method is being called every time I make a method call on the control.Shouldn't
    the bean only be created once at the first method call and persistfor the
    life
    of the session?
    John
    "Anurag" <[email protected]> wrote:
    John,
    Have you tried running the ejbControl/TraderEJBClient.jws in SamplesApp.
    It
    does involve calling methods on the stateless EJB TraderEJB through
    an
    EJB
    control, which accept parameters and run fine.
    Could you also confirm that you are using the 8.1 GA release, andnot
    the
    beta.
    Regards,
    Anurag
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Raj,
    I cannot attach them here. I am not sure how you would test them
    anyway
    as I
    would have to send you my Oracle schema and you would have to
    set
    up
    a
    database
    instance. There is no way I can do that. If you could please
    send
    me an
    e-mail
    I can attach the relevant files in reply and you could take a
    look
    at them
    and
    see if you see any obvious problems.
    Thanks,
    John
    "Raj Alagumalai" <[email protected]> wrote:
    John,
    Can you attach the ejb jar, the jcx and the jws files that you
    have
    created.
    I will test and get back to you.
    Thanks
    Raj Alagumalai
    WebLogic Workshop Support
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I have created an EJB control on a stateless session bean.
    For
    some
    reason when
    I attempt to call a method on my control that takes any number
    of
    arguments I
    get a java.lang.IllegalArgumentException yet if I call a method
    that
    takes
    no
    arguments everything works fine. I used the debugger to walk
    through
    the
    code
    and have discovered that every time I call any method on the
    control
    the
    create()
    method gets called, this is exactly where the error is occurring.It is
    almost
    like the control is trying to pass my method args to the create()
    method
    instead
    of the method I am calling. I have tested all of the methods
    in
    the
    ejb
    by manually
    coding everything (getInitialContext ejb.create etc) in a .jsp
    and
    calling
    all
    of the methods within that .jsp. There they all work fine
    so
    I
    am
    pretty
    sure
    the control is doing something funky. Any ideas as to what
    is
    going
    on
    and how
    I can fix it?
    Thanks,
    John

    Was this issue ever resolved ? We are running into the same problem.
    The last response is "I'm not qualified to answer your EJB control question."
    Can this be escalated to someone who can please ?
    Regards
    Shahriar

  • EJB Control not working with methods that contain arguments

    Hi,
    I have created an EJB control on a stateless session bean. For some reason when
    I attempt to call a method on my control that takes any number of arguments I
    get a java.lang.IllegalArgumentException yet if I call a method that takes no
    arguments everything works fine. I used the debugger to walk through the code
    and have discovered that every time I call any method on the control the create()
    method gets called, this is exactly where the error is occurring. It is almost
    like the control is trying to pass my method args to the create() method instead
    of the method I am calling. I have tested all of the methods in the ejb by manually
    coding everything (getInitialContext ejb.create etc) in a .jsp and calling all
    of the methods within that .jsp. There they all work fine so I am pretty sure
    the control is doing something funky. Any ideas as to what is going on and how
    I can fix it?
    Thanks,
    John

    Oh well guess you guys gave up on this one. Thats ok, I have utilized a workaround
    that forgoes your non working controls just like I have workarounds for your dataforms
    that do not maintain their data between pages, your retrun to page that does not
    work etc.... At this rate I should have just used struts and JBoss.
    "John Hundley" <[email protected]> wrote:
    >
    >
    >
    oop's attached the wrong one here is the right one.
    "John Hundley" <[email protected]> wrote:
    Ok I have attached one of my beans.
    "Anurag" <[email protected]> wrote:
    John,
    For a stateless session bean, the ejbCreate() method is called for
    every
    individual method call. This is because the bean instance is returned
    to the
    pool after every method call, it does not hold any state.
    I am still surprised about the behaviour you are seeing.
    Can you just attach your stateless session bean. You need not sendthe
    dependent files, since we only want to sniff the call made to the stateless
    EJB method, and are not concerned with the implementation.
    Regards,
    Anurag
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Anurag,
    I am using the GA release. My control looks identicle toTraderEJBControl.jcx
    except of course it is extending a different home and bean interface.The
    bean
    itself does not exacly match the traderbean but it does look very
    similar
    to MusicBean.java
    in the tutorialsApp. One thing that has me a bit confused is the
    fact
    the
    create()
    method is being called every time I make a method call on the control.Shouldn't
    the bean only be created once at the first method call and persistfor the
    life
    of the session?
    John
    "Anurag" <[email protected]> wrote:
    John,
    Have you tried running the ejbControl/TraderEJBClient.jws in SamplesApp.
    It
    does involve calling methods on the stateless EJB TraderEJB through
    an
    EJB
    control, which accept parameters and run fine.
    Could you also confirm that you are using the 8.1 GA release, andnot
    the
    beta.
    Regards,
    Anurag
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Raj,
    I cannot attach them here. I am not sure how you would test them
    anyway
    as I
    would have to send you my Oracle schema and you would have to
    set
    up
    a
    database
    instance. There is no way I can do that. If you could please
    send
    me an
    e-mail
    I can attach the relevant files in reply and you could take a
    look
    at them
    and
    see if you see any obvious problems.
    Thanks,
    John
    "Raj Alagumalai" <[email protected]> wrote:
    John,
    Can you attach the ejb jar, the jcx and the jws files that you
    have
    created.
    I will test and get back to you.
    Thanks
    Raj Alagumalai
    WebLogic Workshop Support
    "John Hundley" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I have created an EJB control on a stateless session bean.
    For
    some
    reason when
    I attempt to call a method on my control that takes any number
    of
    arguments I
    get a java.lang.IllegalArgumentException yet if I call a method
    that
    takes
    no
    arguments everything works fine. I used the debugger to walk
    through
    the
    code
    and have discovered that every time I call any method on the
    control
    the
    create()
    method gets called, this is exactly where the error is occurring.It is
    almost
    like the control is trying to pass my method args to the create()
    method
    instead
    of the method I am calling. I have tested all of the methods
    in
    the
    ejb
    by manually
    coding everything (getInitialContext ejb.create etc) in a .jsp
    and
    calling
    all
    of the methods within that .jsp. There they all work fine
    so
    I
    am
    pretty
    sure
    the control is doing something funky. Any ideas as to what
    is
    going
    on
    and how
    I can fix it?
    Thanks,
    John

  • Copying is not working with the Calculator widget!

    I've been running Leopard for months now but only today i needed to copy from Calculator widget and found that "cmd+c" is not working i.e. it doesn't copy what is displayed to the buffer - Pasting from the buffer into the calculator (cmd+v) works, but not the other way...
    This used to work in Tiger with no problems - Anyone else having this problem in Leopard? thanks.

    Throwing my hat in on this one today as well. Worked fine yesterday, this morning nothing. As you noted i can paste to the calculator widget but not back out from it. Have repaired permissions and trashed the dashboard prefs to no avail. Other widgets are still able to Copy & Paste without issue - seems constrained to Calculator itself.

  • Car Bluetooth Steering Controls Not Working with iOS7

    Hi - I have 2013 RAV4. The a steering controls stopped working after updating to iOS 7.
    I can't switch to next song or previous song which i was able to do with iOS6.  Any suggestions how to fix this?

    There are some other discussions on loss of lock screen and control center music controls.
    https://discussions.apple.com/message/23063432#23063432
    https://discussions.apple.com/message/23042786#23042786
    https://discussions.apple.com/message/23071045#23071045
    I believe it is the same issue, which would indicate that it is an issue with the phone, nothing to do with the car/stereo/speakers/etc.
    When I lose Bluetooth control I also lose lock screen (and control center) controls.  Other controls work, but no play, pause, skip forward/back, and of course no song resume on reconnection.  A hard phone reset or power cycle fixes it every time, I never have to mess with the car.  However, the issue re-occurs about every 2-4 days and I have to reset the phone again to get control back.  Does everyone else lose lock screen control at the same time as BT?
    It may be a hardware issue.  I have a 4S.  What phone models are exibiting the BT issue?

  • T61 Sound Controls Not working with vista x64

    I recently upgraded from vista ultimate to vista 64 bit, and since the install, the sound controls do not work.  now, I know i need a special driver to make them work, but can anyone point me to the correct one?  Thanks
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M
    Solved!
    Go to Solution.

    You need to install the HotKey driver.
    As a thought, you may like to add this site to your favourites.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Win2k8 Remote Control Not Working With SRSS 4.2 + SRWC 2.2

    Hi there.
    I have an install of Windows Server 2008 (32bit) with SRSS 4.2 & SRWC 2.2 setup. I was previously on SRSS 4.1 & SRWC 2.1 and having the same issue I am having now, which to me tells me this problem is unresolved or i'm being a total muppet. (hopefully not the last one)
    Windows Terminal Server environments has this awesome remote control feature where you can login to an RDP session which is already active and take control of the session while the end user is still logged in.With Server 2003 this works perfectly fine- it's brilliant. WIth 2008 it is a nightmare. It works for a split second and then closes off. The end users session also gets locked out (not logged out) and they have to put their windows credentials in to carry on working again.
    Now... I can remote control users who are logging in via Remote Desktop on Windows XP/Vista etc.. but I can't with the Sun Ray Sessions. Does the SRWC 2.2 fully compatible with RDP 6.1 or is there any information anyone can give me to point me in the right direction of resolving this issue, like I said.. Win 2k3- Works like a dream....
    Any help would be greatly appreciated.
    Regards
    - Joe.

    I just realised I hadn't posted the logs from SRSS Server with the issues. I have just tried on another WIN2K8 Server which wasn't configured by myself or my company and the same symptoms occurred. See logs below:
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4095]: [ID 702911 user.notice] /opt/SUNWuttsc/bin/uttsc[104]: 4116 Abort
    Oct 1 10:58:06 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4117]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4123]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with error code 134 - exiting
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcrit: [ID 702911 user.notice] Info: critical application uttsc (pid=3902) exited with non zero status: 134
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 422571 user.info] Info: a critical application has exited.
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 126805 user.info] Terminating Kiosk Primary Session ( pid=3902 )
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 308018 user.info] kioskcritd stopped
    Oct 1 10:58:07 ESL-SOLARIS-SPARE utauthd: [ID 794400 user.info] SessionManager0 NOTICE: EMPTY: ACTIVE session
    Oct 1 10:58:15 ESL-SOLARIS-SPARE kiosk:utkioskconfig:refresh[4381]: [ID 702911 user.info] Enabled Kiosk Mode for display ':2'
    Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 118685 user.info] pam_sunray_amgh::[DPY=2] AMGH_SUMMARY: token=pseudo.00144fb78760, username=, AMGH_Done?=NO(Local Session), Details=AMGH is not configured., AMGH_Target=*NONE*
    Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 976841 user.info] pam_kiosk: pam_sm_authenticate: Initiating Kiosk session with user utku2
    Oct 1 10:58:15 ESL-SOLARIS-SPARE kioskcritd[4420]: [ID 190395 user.info] kioskcritd started
    Oct 1 10:58:57 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4612]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
    Anyone able to help me out?

  • File copy does not work with exe files

    I used BufferedReader and BufferedWriter to make copy of an exe file in local drive. Nothing was strange in this code. But I wonder the newly created exe file is denied "..exe is not a valid win32 application" by Windows. I could see the bytes are copied. Is that something like header of exe file is damaged etc ??

    Readers and Writers are for text. For binary data use InputStream and OutputStream.

  • Outbound merge not working with where conditions in 10g

    Hi,
    These are my database details both remote and local database
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for HPUX: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - ProductionI am doing a merge into a remote database from a local table using below query...
    MERGE into sap_mmd_po_all@cosmic_dev.somedomainname trg using (select * from sap_mmd_cmas_po where upload_flag in ('I','U')) src
      on (trg.PO_NO=src.PO_NO and trg.LINE_DISTRIB_SEQ=src.LINE_DISTRIB_SEQ)
      WHEN MATCHED THEN
        update set
          trg.PO_STATUS_FLG=src.PO_STATUS_FLG,
          trg.SHIP_TO_FACILITY_CD=src.SHIP_TO_FACILITY_CD,
          trg.DELV_TO_PHONE_NO=src.DELV_TO_PHONE_NO,
          trg.DELV_TO_NM=src.DELV_TO_NM,
          trg.DELV_TO_ADDRESS_1=src.DELV_TO_ADDRESS_1,
          trg.PO_ITEM_NO=src.PO_ITEM_NO,
          trg.ITEM_DESCRP=src.ITEM_DESCRP,
          trg.PARTY_NM=src.PARTY_NM,
          trg.VENDOR_ITEM_ID=src.VENDOR_ITEM_ID,
          trg.PO_LN_CRTE_DT=src.PO_LN_CRTE_DT,
          trg.BILL_UOM_CD=src.BILL_UOM_CD,
          trg.COMMODITY_CD=src.COMMODITY_CD,
          trg.COMMODITY_NM=src.COMMODITY_NM,
          trg.BSNSS_UNIT_NO=src.BSNSS_UNIT_NO,
          trg.PO_LN_ORD_QTY=src.PO_LN_ORD_QTY,
          trg.DISTRIB_AMT=src.DISTRIB_AMT,
          trg.PO_LN_DEL_IND=src.PO_LN_DEL_IND,
          trg.PO_DEL_IND=src.PO_DEL_IND,
          trg.PO_TYPE=src.PO_TYPE,
          trg.DOC_DATE=src.DOC_DATE,
          trg.CRTE_DT_TM=src.CRTE_DT_TM,
          trg.UPD_DT_TM=systimestamp,
          trg.SOURCE_SYSTEM=src.SOURCE_SYSTEM,
          trg.PO_LN_LST_CHNGE_DT=src.PO_LN_LST_CHNGE_DT,
          trg.TXJCD=src.TXJCD,
          trg.PLANT=src.PLANT
          where (src.upload_flag='U')--if i remove this then it is working
      WHEN NOT MATCHED THEN
        insert( trg.PO_NO,
                trg.LINE_DISTRIB_SEQ,
                trg.PO_STATUS_FLG,
                trg.SHIP_TO_FACILITY_CD,
                trg.DELV_TO_PHONE_NO,
                trg.DELV_TO_NM,
                trg.DELV_TO_ADDRESS_1,
                trg.PO_ITEM_NO,
                trg.ITEM_DESCRP,
                trg.PARTY_NM,
                trg.VENDOR_ITEM_ID,
                trg.PO_LN_CRTE_DT,
                trg.BILL_UOM_CD,
                trg.COMMODITY_CD,
                trg.COMMODITY_NM,
                trg.BSNSS_UNIT_NO,
                trg.PO_LN_ORD_QTY,
                trg.DISTRIB_AMT,
                trg.PO_LN_DEL_IND,
                trg.PO_DEL_IND,
                trg.PO_TYPE,
                trg.DOC_DATE,
                trg.CRTE_DT_TM,
                trg.UPD_DT_TM,
                trg.SOURCE_SYSTEM,
                trg.PO_LN_LST_CHNGE_DT,
                trg.TXJCD,
                trg.PLANT)
        values( src.PO_NO,
                src.LINE_DISTRIB_SEQ,
                src.PO_STATUS_FLG,
                src.SHIP_TO_FACILITY_CD,
                src.DELV_TO_PHONE_NO,
                src.DELV_TO_NM,
                src.DELV_TO_ADDRESS_1,
                src.PO_ITEM_NO,
                src.ITEM_DESCRP,
                src.PARTY_NM,
                src.VENDOR_ITEM_ID,
                src.PO_LN_CRTE_DT,
                src.BILL_UOM_CD,
                src.COMMODITY_CD,
                src.COMMODITY_NM,
                src.BSNSS_UNIT_NO,
                src.PO_LN_ORD_QTY,
                src.DISTRIB_AMT,
                src.PO_LN_DEL_IND,
                src.PO_DEL_IND,
                src.PO_TYPE,
                src.DOC_DATE,
                systimestamp,
                src.UPD_DT_TM,
                src.SOURCE_SYSTEM,
                src.PO_LN_LST_CHNGE_DT,
                src.TXJCD,
                src.PLANT)
                where src.upload_flag='I'--if i remove this then it is working
                ;And it is throwing an error like...
    SQL Error: ORA-00904: "A3"."UPLOAD_FLAG": invalid identifierBut when I replace the remote table name with local table name then query is functioning fine...
    table structure in local database..
    CREATE TABLE SAP_MMD_CMAS_PO
       (     "PO_NO" VARCHAR2(10 BYTE) NOT NULL ENABLE,
         "LINE_DISTRIB_SEQ" NUMBER NOT NULL ENABLE,
         "PO_STATUS_FLG" VARCHAR2(40 BYTE),
         "SHIP_TO_FACILITY_CD" VARCHAR2(100 BYTE),
         "DELV_TO_PHONE_NO" VARCHAR2(50 BYTE),
         "DELV_TO_NM" VARCHAR2(100 BYTE),
         "DELV_TO_ADDRESS_1" VARCHAR2(1000 BYTE),
         "PO_ITEM_NO" VARCHAR2(100 BYTE),
         "ITEM_DESCRP" VARCHAR2(200 BYTE),
         "PARTY_NM" VARCHAR2(1000 BYTE),
         "VENDOR_ITEM_ID" VARCHAR2(100 BYTE),
         "PO_LN_CRTE_DT" TIMESTAMP (6),
         "BILL_UOM_CD" VARCHAR2(50 BYTE),
         "COMMODITY_CD" VARCHAR2(50 BYTE),
         "COMMODITY_NM" VARCHAR2(50 BYTE),
         "BSNSS_UNIT_NO" VARCHAR2(50 BYTE),
         "PO_LN_ORD_QTY" NUMBER,
         "DISTRIB_AMT" NUMBER,
         "PO_LN_DEL_IND" VARCHAR2(10 BYTE),
         "PO_DEL_IND" VARCHAR2(10 BYTE),
         "PO_TYPE" VARCHAR2(10 BYTE),
         "DOC_DATE" TIMESTAMP (6),
         "CRTE_DT_TM" TIMESTAMP (6),
         "UPD_DT_TM" TIMESTAMP (6),
         "SOURCE_SYSTEM" VARCHAR2(100 BYTE),
         "PO_LN_LST_CHNGE_DT" TIMESTAMP (6),
         "TXJCD" VARCHAR2(50 BYTE),
         "PLANT" VARCHAR2(10 BYTE),
         "UPLOAD_FLAG" VARCHAR2(1 BYTE),
          PRIMARY KEY ("PO_NO", "LINE_DISTRIB_SEQ")
    --table structure in remote database table
    CREATE TABLE SAP_MMD_PO_ALL
       (     "PO_NO" VARCHAR2(10 BYTE) NOT NULL ENABLE,
         "LINE_DISTRIB_SEQ" NUMBER NOT NULL ENABLE,
         "PO_STATUS_FLG" VARCHAR2(40 BYTE),
         "SHIP_TO_FACILITY_CD" VARCHAR2(100 BYTE),
         "DELV_TO_PHONE_NO" VARCHAR2(50 BYTE),
         "DELV_TO_NM" VARCHAR2(100 BYTE),
         "DELV_TO_ADDRESS_1" VARCHAR2(1000 BYTE),
         "PO_ITEM_NO" VARCHAR2(100 BYTE),
         "ITEM_DESCRP" VARCHAR2(200 BYTE),
         "PARTY_NM" VARCHAR2(1000 BYTE),
         "VENDOR_ITEM_ID" VARCHAR2(100 BYTE),
         "PO_LN_CRTE_DT" TIMESTAMP (6),
         "BILL_UOM_CD" VARCHAR2(50 BYTE),
         "COMMODITY_CD" VARCHAR2(50 BYTE),
         "COMMODITY_NM" VARCHAR2(50 BYTE),
         "BSNSS_UNIT_NO" VARCHAR2(50 BYTE),
         "PO_LN_ORD_QTY" NUMBER,
         "DISTRIB_AMT" NUMBER,
         "PO_LN_DEL_IND" VARCHAR2(10 BYTE),
         "PO_DEL_IND" VARCHAR2(10 BYTE),
         "PO_TYPE" VARCHAR2(10 BYTE),
         "DOC_DATE" TIMESTAMP (6),
         "CRTE_DT_TM" TIMESTAMP (6),
         "UPD_DT_TM" TIMESTAMP (6),
         "SOURCE_SYSTEM" VARCHAR2(100 BYTE),
         "PO_LN_LST_CHNGE_DT" TIMESTAMP (6),
         "TXJCD" VARCHAR2(50 BYTE),
         "PLANT" VARCHAR2(10 BYTE),
         "DELETE_FLAG" VARCHAR2(1 BYTE) DEFAULT 'N',
          PRIMARY KEY ("PO_NO", "LINE_DISTRIB_SEQ")
      )It seems to me like a bug, but not quite sure...
    your suggestions are appreciated.
    Thanks,
    Ravi Kumar
    Edited by: ravikumar.sv on Dec 14, 2009 1:31 PM
    Commented the where conditions in merge query

    Hi,
    Yes, i hit the same error....
    SQL> ed
    Wrote file afiedt.buf
      1  merge into hr.test1@test_dblink using test2 on (test1.id = test2.id)
      2  when matched then update set test1.col1=test2.col2 where test2.id=2
      3* when not matched then insert (id, col1) values(test2.id,test2.col2)
    SQL> /
    merge into hr.test1@test_dblink using test2 on (test1.id = test2.id)
    ERROR at line 1:
    ORA-00904: "A3"."ID": invalid identifier
    ORA-02063: preceding line from TEST_DBLINKBUT here is a work around...to add the where condition while joining(ON) itself.
    SQL> ed
    Wrote file afiedt.buf
      1  merge into hr.test1@test_dblink using test2 on (test1.id = test2.id and tes
    t2.id=2)
      2  when matched then update set test1.col1=test2.col2
      3* when not matched then insert (id, col1) values(test2.id,test2.col2)
    SQL> /
    2 rows merged.
    SQL>For you the condition would be...
    on (trg.PO_NO=src.PO_NO and trg.LINE_DISTRIB_SEQ=src.LINE_DISTRIB_SEQ AND src.upload_flag='U')cheers,
    Edited by: Avinash Tripathi on Dec 14, 2009 2:53 PM

  • Sound control not working on my blue tooth keyboard

    sound control not working with my bluetooth keyboard

        UAVPilot,
    Thank you for the information. I do show that the device and car are capable of this function. I do not show any reason you should not be hearing the notifications. One thing you will want to check is that the sound for both your notifications and media are turned up. Also you can look into going into Settings>Apps>S voice Drive Mode> Clear Cache. This should clear any possible bugs in the application. Please keep us updated on this and we can check on other options.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport

  • I have a website that I am building. Transferring word docs to the site by copy/paste does not work with firefox.Why?

    I am trying to complete my website data entry with fire fox since the security of internet explorer is questionable. I am having no success in transferring written or graphic documents from Fire Fox to my website.

    I assume this is a sitebuilder tool. Could you mention which sitebuilder it is?
    Is the problem that a paste button provided by the sitebuilder does nothing when you click it? This could be related to a Firefox security feature that bars sites from reading your Windows clipboard. Or it could just be broken. If it's a sitebuilder button, I could look into past threads for possible solutions/workarounds.
    For pasting text, instead of using a button provided by the sitebuilder, can you use one of the Windows shortcuts?
    * Ctrl+v
    * right-click > Paste
    * Edit menu > Paste ''(if you use the classic menu bar)''
    That might not work with images...
    Finally, I will say that Internet Explorer 11 is a pretty solid product. If you need to use it for your website builder tool because it only works well in IE, I don't think you are taking a lot of security risk there. Just don't stray over to random sites you don't trust.

  • CISCO Box not working with Infrared Remove Control Repeater

    There was an Infrared Remote Control Repeater set-up in my newly purchased house.  It works for my LG DVD player, but does not work with my CISCO CHS435HDB box.  Are there any work around for this?  Should I change to a different box?

    If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Brightness and volume control keys not working with windows 7?

    brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?

    Welcome to the Apple Support Communities
    Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
    To install them, follow these steps:
    1. Press the X key while your Mac is starting to start into OS X.
    2. Open Boot Camp Assistant and tick only the option to download Windows support software.
    3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
    4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers

  • When I right click on an Item to copy and pasdte it the Copyt button on my mouse does not work with firefox, it works everywhere else...I highlight an item andt

    I have tried all the solutions so far. they did not change the outcome. My right mouse will not show the copy command. I am getting the drop down menu when I right click and I can highlight words but when I right click to copy and paste the copy does not work... it was working fine until I did the last update for foxfire.. I have 22.0 version

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    <b> To Enable SafeMode </b>
    *You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    *''Once you get the pop-up, just select "'Start in Safe Mode"''
    If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
    * https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I inadvertently installed the mountain Lion Safari over my existing copy not realising that it would not work with OS 10.7.5 and now I am unable to use it .

    I inadvertently installed the Mountain Lion Safari over my existing copy not realising that it would not work with OS 10.7.5 and now I am unable to use it .
    Can someone suggest a solution please.

    It should work, but it's an unmitigated mess. Simplest is to boot into recovery mode and reinstall the OS.

Maybe you are looking for