Sales document header-- head text changes not working in VA01 if we rasie with reference to quotation

Hi,
Greetings!!
We have raised a quotation, in this quotation we have manually updated Job number (1234) and project number (9876) in header--> header text and saved the quotation.
With reference to this Quotation we raised a sales order(VA01) and here we have changed job number from 1234 to ABCD and project number from 876 to EFGHIJ and saved the sales document but system by default takes quotation job and project number only. If we go to change mode of sales document (VA02) our changes working fine.
ould you please let us know how we can overcome this issue? Or this is standard behavior or what?
Regards,
Sree

Hi,
Text determination configuration is done in VOTXN
check VOTXN for your text determination procedure and under access sequence check if there is any routine added

Similar Messages

Remove Header text from a sales order, created with reference to quotation

Hi all,
I have a sales order(in VA01) which is created with reference to quotation (in VA21).
If header text (Notes for logistics, Note for responsible person, Header text Doc & Declaration) in texts tab is maintained in the quotation they are getting copied in Sales Order which is NOT the requirement.
I need suggestions on how to disable the text that is getting copied.
Any pointers would be of great help.
Regards,
Vamsee Priya.

Hi Nilesh,
I created a routine in vofm and this solved my problem.
Now, I'm having a similar problem where I'm creating an Invoice(through transaction VF01) giving the delivery document number and document type (Invoice F2).
we are maintaining Header text in Order through which the above mentioned delivery document number is created and this header text should get copied in the Invoice.
For this, I went into Transaction VOTXN, from there selected billing header, from here kept a break point for the routine BEDINGUNG_PRUEFEN_001 through which the text will get copied.
Now, when I'm creating the Invoice this routine is getting executed, but still the text is not getting copied.
Any pointers on this would be of great help.
Also at the end of your previous mail, you are telling about SPRO - text assignment. Can you please let me know how to I should navigate to this text-assignment??
Thanks and Regards,
Vamsee Priya.

Ihave a iphone4s.my head phone mic is not working. What can i do for this problems?

Ihave a iphone4s.my head phone mic is not working. What can i do for this problems?

if it's under warrenty you can return them to where you bought them
if not you can buy a new pair
or live with not using the mic in the headset

TouchUp Text Tool not working?

I have Max OS X 10.4, Acrobat 8.1.2 and cannot get the TouchUp Text Tool to work? Can select text and delete/copy/paste etc but cannot add/change/modify any text from the keyboard? All keyboard text keys not working or changing data?
Was using Acrobat 7 and it worked great, however this version is just not cooperating.
Any suggestions would be greatly appreciated...
Thanks,
Ron

I talked to a very helpful person at Adobe Acrobat Tech support yesterday (Tony) and I *think* I have the problem resolved. [BTW, I don't see any definite mentions to this here: during this problem I was able to delete (using either of the delete keys) text and I was able to hit 'return' to get to a new line - while using the touch-up text tool. Also, I was able to create a new blank document and type in next fine too.]
After troubleshooting all the possible causes with Tech support (including manually trashing all the /user/library/preferences/acrobat (folder) and all the com.adobe.acrobat ..(8) preferences in the /user/library/preferences folder - and after reinstalling Acrobat 8 - the issue still wasn't fixed. I called back Tech Support and got the same person (Tony) and with him still on phone, I created a new user on my Mac -- recreated the text touch-up tool problem and Acrobat 8 worked just like it was supposed to do. -- so ... the problem was in my 'old' user account & probably a font problem.
Tony the Tech transfered me over to a Font Tech at Adobe (who was a rude, nasty s-o-b who barely spent 2 minutes with the problem, but that's IMHO) who told me the only resolution, since in his opinion I had a corrupted User account, was to trash my current User account on my system and start fresh -- no alternative! Since that wasn't acceptable to me, and since the Font Tech could or would not give me a straight answer about transferring fonts from my User/Library/Fonts to the computer (root, not system) /Library/Fonts and working on Acrobat that way .... or fixing any font problems in my current /user/fonts -- ..... I hung up the phone and resolved to track this down myself (with the help that was already given to me by Tony the Acrobat Tech.
The first thing I tried this morning was to see if the Acrobat 8 text touch-up 'bug' was still happening -- and it was.
So I spent the rest of this morning validating fonts and deleting duplicates -- (you know how those nasty duplicate fonts just appear even though you think you have them all removed a month or so ago). I also moved all my Adobe otf fonts over to my /Library/Fonts and deleted those same fonts from my /User/Library/Fonts.
I just fired up Acrobat 8 and tried the text touch-up tool --- and it works fine! No problem at all.
Final answer (at least for me) is --> validate all your fonts. I used Font Book (Mac OS) to do this. Delete any major errors on fonts you can live without. Some of the warnings you get (on the critical errors and caution warning both are confusing: 'name' table warning, for example. I did find an Apple Developer document that explains (to a small degree) what these mean: http://developer.apple.com/textfonts/TTRefMan/index.html
Definitely delete every duplicate font you find. I kept some non-duplicated fonts with minor warnings, but these fonts wouldn't be used in Acrobat anyway.
I don't know if moving the Adobe otf fonts to my root /Library/Fonts helped or not since I didn't do a test of this prior to any validation on my user/font file. It was just one step in my bug fix.
Let me know if this works for you all too.
-- Susan

Context change not working

hi,
i am doing a maping between an xsd and message type with structure which has:
1.nested structure
2.source field occurs more than once in thses netsed structure.
fields not having multiple occurence have the same value as in source but the one having mulitple occurence are having different fields.
my context handling not working.
i m using splitByValue and changing the context of source field to its immediate header which is again not working.
can anyone help in this regards
i appreciate quick reply which is needed-thanks

okay Mark,
i will try to explain,
target
<Root>
><Parent Node1> 1..unbounded
><childe node1> 0..1
><childe node2> 0..1
><Parent Node2> 0..unbounded "item of parent node1"
><childe node3> 0..1
><childe node4> 0..1
><Parent Node3> 0..unbounded ""item of parent node2"
><childe node1> 0..1
><childe node2> 0..1
source
<Root>
><Parent Node> 0..unbounded
><childe node1> 0..1
><childe node2> 0..1
><childe node3> 0..1
><childe node4> 0..1
when i try to check the context at parentNode1,2,3 its occurences gets affected.
like if supoose parent node1 is suppose to occur3 times along with its items i.e parentNode2, parentNode3; it occurs 3 times but in the 2nd and 3rd occurences there are no items in it.
rest the child nodes are mapped wth context chnge to its immediate header using splitVal.
let me knw if nt clear
thnx al

TEXT-INDENT NOT WORKING

Hi!
Please see the below CSS code, why isn't the text-indent not
working? everything else is?
a.quick_link_buttons:link {
color : #004489;
font-family : Myriad, Arial, Helvetica, Verdana, sans-serif;
font-size : 12px;
text-indent : 10px;
line-height : 20px;
text-decoration : none;
font-style : normal;
font-weight : normal;
a.quick_link_buttons:hover {
color : #004489;
font-family : Myriad, Arial, Helvetica, Verdana, sans-serif;
font-size : 12px;
text-indent : 10px;
line-height : 20px;
text-decoration : underline;
font-style : normal;
font-weight : normal;
Many Thanks!

You don't need to respecify styles that will inherit or
default styles. You
could achieve the same styles with the following -
a.quick_link_buttons {
color : #004489;
font-family : Myriad, Arial, Helvetica, Verdana, sans-serif;
font-size : 12px;
text-indent : 10px;
line-height : 20px;
text-decoration : none;
a.quick_link_buttons:hover {
text-decoration : underline;
As for why the indent isn't working, try 'padding-left:10px;'
instead, when
applied to the inline element. Or, you can have a rule that
will apply to
the container for these links, e.g.,
<div style="text-indent:10px;">
<a class="quick_link_buttons">whatever</a>
</div>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jinxed" <[email protected]> wrote in
message
news:eur929$gro$[email protected]..
> Hi!
>
> Please see the below CSS code, why isn't the text-indent
not working?
> everything else is?
>
> a.quick_link_buttons:link {
> color : #004489;
> font-family : Myriad, Arial, Helvetica, Verdana,
sans-serif;
> font-size : 12px;
> text-indent : 10px;
> line-height : 20px;
> text-decoration : none;
> font-style : normal;
> font-weight : normal;
> }
> a.quick_link_buttons:hover {
> color : #004489;
> font-family : Myriad, Arial, Helvetica, Verdana,
sans-serif;
> font-size : 12px;
> text-indent : 10px;
> line-height : 20px;
> text-decoration : underline;
> font-style : normal;
> font-weight : normal;
> }
>
> Many Thanks!
>

Document being distributed no changes not possible and btadminh could not be locked

Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.

Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh

TS2755 My voice to text is not working. How can I fix it? I have an iPhone 5. Thx!

My voice to text is not working? How can I fix it? I have an iPhone 5. Thx!!

The microphone icon is not available- it's there but a pale grey. I could use it now to type this but not when texting. Siri is enabled and working fine.

Adobe XI - Hightlight text tool not working

Just downloaded adobe XI and the hightlight text tool not working. How can I get this to work.

I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

Texting is not working on new iphone 4s. Any suggestions?

Texting is not working on new iphone 4s. Any suggestions?

Att just told us to delete all txt conversations they are getting lots of complains about this.
it seems to work so far

My predictive text does not work since the new update

The "predictive text" does not work on y IPod 4g since the new software update. How do I fix it?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Policies assigned to groups - membership changes not working

I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on group membership.
If I change a user from one group to another group this change does not reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

What you observed is the expected behavior.
ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
Try Updating the published policy to see if that works. From the docs:
Updating a Published Policy
Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
>>>
From: laurabuckley<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/15/2009 7:16 AM
Subject: Policies assigned to groups - membership changes not working
I have a single ZESM IR8 server setup.
All security throughout my environment, ZESM and otherwise, is based on
group membership.
If I change a user from one group to another group this change does not
reflect in their policy assignment.
Scenario: GroupA = standard user policy, GroupB = power user policy.
UserA was first in Group A and therefore got the standard user policy.
UserA now requires the power user policy.
Remove UserA from GroupA and add UserA to GroupB (in iManager).
UserA does NOT get the "power user" policy that is assigned to GroupB
Am aware that I can assign the policy at a user level but this is NOT
an option in my environment. All security assignments MUST happen at a
group level.
laurabuckley
laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
View this thread: http://forums.novell.com/showthread.php?t=395870

Changing quantities in sales order with reference to quotation

Hi,
Quotation has been created for Product -- A, 10 quantities.
Sales order created with reference to quotation, system copies 10 quantity in sales order.
How do you restrict in sales order end user should not change quantities, system should not allow for changes by end user. If end user changes Qty system should give an "Error message", so that sales can not be saved.
Could you suggest solution ASAP.
Thanks in Advance.
Regards,
vamsi.

Normally You will have a warning message set for this. under class V1. if you want the error to be hard error then you would have to hard code it in a user exit under mv45afzz "userexit_save_document_prepare" where u can check if the quantities in the quote and sales order are different and create a hard error.
the other option which I am not sure if it is possible is to propose the eror in message class v4 which you can control thru customisation under SPRO>SD>message settings
reward points if it helps
regards
Biju

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

Sales document header-- head text changes not working in VA01 if we rasie with reference to quotation

Similar Messages

Maybe you are looking for