Sales order According to the Customer PO

Hello all,
I am very new to SAP SD. I am using ECC 6.0 machine.
When i search and display any sales order, it contains PO number. I want details of this Purchase Order. For that i used 'BAPI_PO_GETDETAIL'. But after executing it shows me that 'PO Does Not Exist.'
After some investigation i realized that it is a Customer's Purchase Order. I need the details of the Customer PO. Is there any built in BAPI which will give me these details?? Or any table which will store the details of this PO so that i can write custom RFC to fetch data from the same??
Any Help??
Thanks,
Prashant

hello, friend.
do i understand correctly that you would like to see information related to the customer's PO?
1) normally, you receive a call from the customer with his PO or your salesman submits a customer's order with customer PO, and you create a sales order. you manually enter the PO in the field for PO in the sales order. the details of the order are what you enter in the sales order.
an alternative is that the customer PO details are first entered in an inquiry or quotation, which are later referenced/copied when you create a sales order.
that's about all of the details you can get. however...
2) if you use IDOCs or XI in receiving orders from the customer, the XI consultant maps the customer's PO number and targets the PO field in the sales order. if this is what you do in your project, then the XI consultant can help you with the PO details.
hope this helps you even a little.
regards.

Similar Messages

List of incomplete sale orders according to the sales document wise

Hi Gurus
can any body suggest me the tcode to find the incomplete sales orders according to the sales document wise
regards
satish

Hi,
Please run T/code V.02 to see incomplete sales orders.
Regards,
Jaiprakash.P.T

Sales order confirmation to the customer through email

Hi
I have configured output type z101 for sales document.Here I selected transmission medium 5 for 'External Send' . After that I completed output determination procedure as same steps and testing purpose I opened VA02 and goto Extras> ouput>Header>Edit>
here I entered ouput type ,medium 5(External Send),partner,language.
My issue is
Whenever I created(saved) the sales order then immediately order confirmation goes to the customer emailid. customer email maintained in customer master(xd01).
Please inform the what are the required settings using SCOT Transaction. This is the urgent need.
Regards,
Ravi

Please have a look at the note 455140.
Also look at the following weblog.
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Message was edited by: Vinod C

Reserving the sales order stock for a customer

Hello SAP gurus !!
My client is wants to Reserve the stocks once the order is placed or confirmed by the Customers.
For Example; --
If 10 c/s are available in the plant and a customer has ordered 10 c/s... next time .. if someone is creating order for the same Material, system should not confirme sales Order as this particular stock has already booked by the customer.
Can we MAP this scanario in creating DUMMY sales order??
I have also tried to move the sales order stock to Reserved Stock by creating Reservations (Tcode MB21) using movement type 412 E.
but i m not sure whether i m on the right way or wrong??
Please help me on this particular issue. Points will be rewarded for Helpful answers.
Thanks in advance.
Regards,
MAYANK

Hi Ravi
Actually we have started this particular issue with Product Allocation only.... but the problem with product allocation is : you can not reserve/block the stocks even if it has been allocated to other customers.
If some other user is creating the sales Order for some other customer, system will confirm and you can do the delivery also.
Basically Client want to first allocate( here allocation could be through creation of Dummy Sales Order also) then also want to BLOCK /RESERVE for those customers... so that nobody should be allowed to use those Stocks.
We have Already tried with:--
1. Product Allocation
2. OVZ9 ( checking Group 02/ Sales Order Combination)
3. MB21 ( creating Reservation with Movement Type 412 E)
4. Consignment Process
& some other Options but exact requirement has not been met.
Now we are trying to solve this Issue using some scenarios Other than Prod Alloc.
I hope i have clearly explained the requirement still you have any doubts, please revert back.
Thanks in advance
Warm Regards,
MAYANK

Retrieve the sales orders for a particular customer in selection screen

Hi
I want to retrieve the sales orders for a particular customer(entering customer number field in the selection screen and then clicking on f4 help on sales order field in the selection screen I should get only sales order numbers for that particular customer number).How can I achieve this through search helps?Are there any standard search helps that I can use.
<removed_by_moderator>
Edited by: Julius Bussche on Apr 9, 2009 12:55 PM

Hi,
try this:
at selection-screen on value-request for p_par.
select * from vbak
into itab
where kunnr = p_par.
then use the FM 'F4IF_TABLE_VALUE_REQUEST'.
with
retfield = 'VBELN'
dynprog = sy-repid
dynpnr = sy-dynnr
dynprofield = <name of parameter>
value_org = 'S'
tables = itab.
Regards,
Leo.

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Display Several Sales Orders from Same Business Customer TOGETHER in MD04

Hello
In MD04 is it possible to display several sales orders from same business customer together?
For instance one business customer order bikes for two times.
The Order-No are 12912(50st by 07/08/09) and 12913(100st by 10/08/09).
Normally after runnning of MRP(MD02), the planned orders are displayed seperately in MD04.
I want to display two orders together.
The reason is if some trouble happens in Production(for Ord-no 12912) and it cannot be deliveried on schedule, however Production (for Ord-no 12913) is going without trouble, the final-products for order 12913 should move for 12912.
If you have some good solutions, please share it.
Thank you for your advice.
Regards,

Hi Riyolshibashi,
Lets look at the two main scenarios, MTS and MTO.
In MTS, the general display filters are available in MD04. Standard SAP filters do not filter on 'customer'. I suspect this is because the concept would normally be illogical in a MTS environment. Planned orders do not exist to serve a customer, but to serve 'stock'. But let us not think about SAP and their logic.
SAP allows you to create customized filters, in IMG>Production>MRP>Evaluation>Filter>Define Display filter. Within this definition, under the "Addnl Selections' tab, you can tick 'Define addl selections in the transaction'. When you use this filter in MD04 display, then, one of the options available to you is to enter a specific Customer number, and then the display will only show the requirements from this customer. Since you have excluded all other customer's orders, all orders of a single customer will be displayed consecutively. Next to each other.
In the case of MTO, the 'filter-by-customer' concept makes more sense (although, not for the reason you have stated. You would have to find some manual method to convert a production order from supporting one sales order item, to supporting another sales order item. Possible but difficult). Anyway, the above mentioned customized filter would also work in an MTO environment.
Regards,
DB49

Single invoice against mutiple sales order for a single customer PO

Hi all,
Customer provide a single order via EDI per Depot. When the order is received into SAP these are split into multiple order based on the Production or distrubtion location of the products. The customer will receive a number of deliveries to the depot from the various locations. Each delivery has his own SAP sales order and delivery note. This creates mutliple invoice against a single Purchase order sent by the customer.
We have a requirement from two customers that they only wish to receive a single invoice per depot per day. This means we need to change the way we currently invoice the customers(no multiple invoices needed).We need to be able to combine multiple deliveries with the same PO to a single invoice. This would mean that the invoice can't be generated until all the deliveries relating to the single PO have been POD flagged or 7 days have passed from PO date and invoicing is due.
how to achieve the above,whether through user exit in billing or data transfer routine in copy control(delivery to billing) or through config and how ??
regards
sachin

For generating collective invoice from deliveries, you can customize the copy control (VTFL) as per your need. Please see the copy requirement 004 and data routine 001.
Bye
Ellath

Single invoice against multiple sales order for a single customer PO

Hi all,
Customer provide a single order via EDI per Depot. When the order is received into SAP these are split into multiple order based on the Production or distrubtion location of the products. The customer will receive a number of deliveries to the depot from the various locations. Each delivery has his own SAP sales order and delivery note. This creates mutliple invoice against a single Purchase order sent by the customer.
We have a requirement from two customers that they only wish to receive a single invoice per depot per day. This means we need to change the way we currently invoice the customers(no multiple invoices needed).We need to be able to combine multiple deliveries with the same PO to a single invoice. This would mean that the invoice can't be generated until all the deliveries relating to the single PO have been POD flagged or 7 days have passed from PO date and invoicing is due.
how to achieve the above,whether through user exit in billing or data transfer routine in copy control(delivery to billing) or through config and how ??
regards
sachin

Hi Sachin,
You will have to create a new data transfer requirement on the copy control between the delivery and the invoice. In the new data transfer requirement, you will need a programmer to code when there should be an invoice split.
Regards,
Finbarr

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

Purchase order number of the customer equals to the batch number

At our case, purchase order number of the customer equals to the batch number. Purchase order number will be written on the sales document (VBKD - BSTKD).
1. How can the production department can see what is written in this field (on md04 or etc...)? The batches will be created by the PP module so they have to see what is written on this field to give the right number to the batch externally (when creating the batch manually).
2. If batches are automatically created, how can we make the batch number to be equal to the purchase order number which is written on the sales document (VBKD - BSTKD)?
I'll be happy for the answers and I'll also be happy if you can give me the names of the user exits for the above questions. Thanks in advance for the answers....

Hi Yasar?
Did you evaluate working with valuated sales order stock?
This way your PP people could use Make to Order style manufacturing and produce for a special "batch" => The sales order special stock.
Can be used in Repetitive Manufacturing and has no impact in costing, therefore a nice option for the situation you are describing.
In MD04 a special segment will appear for the the Sales Order stock and this stock will only be able to be shipped for this special order.
Best Regards,
Franck

Sales Order - Returns change the sales order item delivery status

Hi All,
we have the following requirement from our users:
after creating a return, the original sales order should have the
delivery item status changed.The system should permit that a new
delivery can be created for sales order item already delivered / billed (a new delivery with the quantity that has being returned) but has a return document,
without increasing the sales order quantity.
Does any body got the same requirement ?
Thanks in advance,
Marcus

Hi Marcus,
After creating return order you have to do the goods receipts.But this doesn't mean that you will be able to create a delivery with the old order itself.
You have to create the order again and ahve to create a new delivery,goods issue and billing.
Another option is as Roberto said that you have to reverse the goods issue thru VL09 and then cancel(delete) your delivery and then you can create a new delivery wr.t to your original sales order.
Reward points if it helps.
Regards
Karan

Sales order reference at the time of Production Planning

Hi all,
Is there any Hard check (or) Validation at the time of assigning sales order in Production order?
to be more specific
At the time of creating production plann, we assign open sales order to that. Again if new production plan is created and with out knowing if he assign the same Sales order number system should block it.
Is there any solution for this
Regards
Shashi

Shashi,
Couple of important things to be noted.
1. How could you determine if the first user linking the SO to the Production Order really selected the correct one. It could be very much possible that the same Sales Order linked to the another Prod Order is actually correct.
Unless you have a business validation procedure to check this it will not be of much value to prevent duplicated.
You can read about the transaction notification stored procedure using the link below
https://service.sap.com/sap/support/notes/1011154
This transaction notification is a stored procedure available in a company database and can be accessed from SQL Server Management Studio
Suda

Can't get my 3rd Party Sales Order to create the PO automatically...

I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
Thanks.

Hi Dennis - I really appreciate the feedback but I started this thread with ....
I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
I have since confirmed that I can trigger a PO creation by running ME59N BUT the PO is not created automatically when I save the sales order despite what the help text on the item category implies.
I think I have already done every you have suggested and even a little more, or maybe I'm missing something? Do I need to do something with ALE - turn something on perhaps? Have you actiually seen this functionality working? I'd love to hear from someone who has.
Regards.
Patrick

How Variant Configuraton data from Sales Order stored in the database

Hi,
I understand that the "variant configuration" data (chosen values for each characteristics assigned to material) from a sales order is stored separately with reference of an object in SAP.
Please let me know how SAP stores such data -source in the database tables.
This is required to draw a report of these charateristics values for various sales orders (Transactional data).
I also understand that there are function modules to retrieve this data, but the function modules are unable to retrieve data as accurately as the VA03 program.
Thank you for your advice.
Regards,
Hemant

Hi ,
I do not know what a reference charactersitcs is,but there are all independant characeristics in terms of their values.
A guess it is because the VC data is changed after the sales order is created, the updated VC data is displayed properly only in VA02 or VA03 but other function modules fail to display the updated VC data.
I understand there is a relationship of instance -between sales order object and VC data object-which we need to update and then see the latest data.
Please let me know if anyone has debgged VA03 to know how the standard SAP program retrieves VC data in a sales order.
Thank you,
Hemant

Sales order According to the Customer PO

Similar Messages

Maybe you are looking for