Sales Order creation with WBS Element

Hi Friends,
I tried to create a sales order with each line item being associated with a WBS Element based on the material. But when i try to save the document its throwing an error saying that 'WBS element <elt_name> is not a billing element'. What does this mean?
Prompt replies would be rewarded.
Thanks in advance.
Tamilarasan.

Hi Tamilarasan,
You must select the checkbox of "Billing element" in the frame "Operative indicators". If you don't see this check box, you must display it from SPRO PS customizing => Define field selection for WBS structures.
Regards

Similar Messages

Open a Sales Order on statistical WBS element. How?

Hi,
I tried to open a sales order on a statistical WBS element but the system shows me an error saying I can't open it because the WBS is statistical.
Could it be a problem of Controlling Area or Operating Cornern?
Is there a setting that allow me to open a sales order on statistical WBS element?
Thanks,
Diego

To best of my knowledge, WBS is only a search criteria if u wish u take a doc as ref. in sales order. this ref. will happen only if the previous doc is prepared with ref to WBS. may be at header or item level. but i wonder how will it track the doc if there are multiple WBS in previous doc. u can assign WBS in account assignment tab page.
I wonder if i have helped u with my answer.

BAPI for Production order creation against wbs element

dear all,
I am using BAPI (BAPI_PRODORD_CREATE) for Production order creation against wbs element.I am putting following input paramters in this
material no,
order type
plant
qty
basic start dt & end dt
wbs
But during GRN it is not taking the account assignment as project stock i.e. its picking movement type 101 but it should be 101Q.
For this what changes are required.
regards
ravi arora

Hi,
2 options i can think of:
1. Create a BDC program by recording co10
2. Create a planned order with order type PR using BAPI_PLANNEDORDER_CREATE, specify the WBS element & other details. Now use BAPI_PRODORD_CREATE_FROM_PLORD to create a production order with reference to the planned order created earlier.
I believe option 2 should meet your need. Check & revert.
Regards,
Vivek

Sales order assignment to WBS element

Can somebody tell me Where a Sales order is assigned to a WBS element?
I am aware that it is assigned to WBS element Field in Item details>>Account assignment Tab. But in this tab page on Sales Order screen, I am not able to see WBS Element field. I am able to see the WBS element field for FERT items but not for DIEN.
Can somebody tell me where exactly is this done so that I get the WBS element field populated in SO?
Rgds

Hi
Hope the following will fulfill u r requirement
1) What is WBS element?
2) What is the Tcode to get to that screen?
3) What is the need and pupose of WBS element?
4) Do we happen to work on Functional module during our implementaion project? 5) In what scenario/situation we will be working on WBS?
WBS is nothing but Work Breakdown Structure. It is mainly used in Project System (PS) module. Tcode : CJ20N
For any project defined we must have atleast one WBS. Within this WBS we can have networks. Networks are nothing but the series of activities. Material are used to perform the activities.
To explain in detail just consider one example:
Govt of india wants to have Roads to be build through out the india. So Project can be defined in sap as Connectivity.
WBS can be roads within different states like Roads for Gujarat, Karnataka etc.. i.e. WBS Gujarat, WBS Karnataka etc.
We can define different networks for these WBS like Road Between Ahmedabad to Surat or Between Bangalore to Belgham.
For this network we can have many activities like Land selection, Land Preparation, Road Building, Final finishing etc etc.
Hemals example was a good example. Project Systems comes into play only when the industrys business is based on projects like Construction companies, Engineer to Order scenarios. You may not see anyone using PS module for retail business. As Hemal explained in that example, you have a main project which is broken down into WBS elements. You can use the TC CJ20N to create the project and the WBS elements. Each WBS may have mutiple Networks associated and each Network may have multiple Network Activities as explained in the example by Hemal.
On the Sales Order, if your client is implementing PS module, you may have to attach the Sales Order to the WBS element it belongs to. WBS element is nothing but a bucket where all the activities belonging to that particular part of the project are captured. In the example, WBS Gujurat will tell you how many Sales Orders were created for the Gujurat sector, howmuch was spent on raw materials, whats the currect stock ([roject stock) available. How many Production Orders have been confirmed and howmany of them are getting confrmed in the future. How many invoices have been generated or how much revenue has been generated for that particular sector. How many deliveries have been made, what deliverables are still not accomplished.
So as you can see, PS is the center stage for all the modules that are being implemented like FI/CO, SD, MM, PP in this example. You can have cost centers and work centers defined. You can also have profit centers assigned at the plant level and get reports on varius selection criteria.
In a complete cycle of PS, like in reality, you initiate a project, you confirm/release the WBS/activities as per requirement, you execute the project and you close it.
One cannot initiate an activity unless it has been released by the project manager. Everything is accountable here and every dime is counted and at the end you know howmuch did you spend or make on each sector (WBS). Dont get confused with the term sector here I am using it just for the explaination purposes.
In one typical example, the company I was working with until not too long ago, had Deliveries from the Project (TC: CNS0). We never used VL01N. We used CNS0 to create a delivery and then used VL02N for confirming the picking quantity for the already created delivery document.
I hope this should help you at least a bit. Im not a PS consultant so I may not know a whole lot but trying going to CJ20N and you will see a lot yourself.
PS concultants are one of the highest paid consultants. Their supply is less and so is the demand. They are expected to understand real world business processes very well and they are generally the center stage of a project.

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Sales Order Creation with reference to Contract

Hi all ,
Existing Setup in the System:
1) I have a contract created with a validity period of 30 days. When i create sales order with reference to contract, then i get a pop-up box, from the box i can select my contract.
2) I have a Lead time configured as 5 days for the Sales document type , I,e when I create sales order I can see my Requested delivery date is always system date + 5 days.
3) I have a Pricing date configured as Todays date. Therefore when I create sales order I can see pricing date becomes the system date.
Execution of Sales Order:
4) When I create Sales Order with reference to contract document. Always Requested Delivery date is compared with Contract Validity Dates.
Example: Contract Validity 01/03/2008 - 31/03/2008
Sales Order: Sales Order Creation date -> 19/03/2008, Pricing Date: 19/03/2008 Requested delivery date 24/03/2008.
REQUIREMENT IS:
But my requirement is when i create Sales Order it should consider System date or Pricing Date( since pricing date is today date) for to compare with contract validity dates.
Can it be done with standard config or do we need to some type of custom? Appreciate your help
Thanks

Hi ,
As said when I create Sales Order with reference to contract document. Always Requested Delivery date on Sales Order is checked against Contract Validity Dates.
But i want Pricing date in Sales Order should be checked against Contract Validity Dates.
Can someone suggest me on this?

Sales order creation with respect to contracts

Hi Guys,
I am trying to create a saleorders with referece to contract for which in the background I configured so that during my sales order creation I see the pop-up box with all existing contracts for a specified sold-to party.
This process is so painful that order entry people have to manually select from the big list (pop up box consisting of huge list).
Is there any way so that I can automate this process insetead of selecting contracts from that list.
Regards
Krishna

Hi Ravi,
Thanks for your solution and could you please give me some more details what is the neame of the user exit.
and welcome for some more suggestions.
Thanks
Krishna
One way is to create the order with reference to the Contract and then the system will not give the pop up for the existing contracts.
The other way to automate the process is by using a userexit. Here the system should check all the existing valid contracts for this sold to party and should select the oldest or latest valid contract, as per the client choice.
Thanks,
Ravi

Sales order creation with bapi in webdynpro using table control

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

Sales order creation with bapi in webdynpro

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
       elem_order_header TYPE REF TO if_wd_context_element,
       stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
       elem_order_items TYPE REF TO if_wd_context_element,
       stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
      i_order_header_in TYPE table of bapisdhd1,"
      i_order_partners TYPE TABLE OF bapiparnr,
      w_order_partners TYPE bapiparnr,
      i_return TYPE TABLE OF bapiret2,
      w_return TYPE bapiret2,
      i_order_items_in TYPE TABLE OF bapisditm,
      w_order_items_in TYPE bapisditm,
      i_order_conditions_in TYPE TABLE OF bapicond,
      w_order_conditions_in TYPE bapicond,
      w_order_SCHDL type BAPISCHDL,
      i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
          i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input = w_order_items_in-material
   IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
   IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
         w_order_SCHDL-req_qty     = stru_order_items-target_qty." '5'.
          APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
   order_header_in = w_order_header_in
   IMPORTING
     salesdocument = v_sales_doc
     TABLES
       return = i_return
       order_items_in = i_order_items_in
       order_partners = i_order_partners
        order_schedules_in = i_order_SCHDL
       order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
        l_message_manager    TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
    RECEIVING
      message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
      wait = 'X'.
    CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
    INTO v_message_text SEPARATED BY space.
Report Success message
    CALL METHOD l_message_manager->report_success
    EXPORTING message_text = v_message_text.
    ELSE.
      v_message_text = 'Error Creating Sales Order'.
Report Error message
      CALL METHOD l_message_manager->report_error_message
      EXPORTING message_text = v_message_text.
      ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
        itm_number type bapisditm-itm_number,
        material type bapisditm-material,
        plant type bapisditm-plant ,
        target_qty type bapisditm-target_qty,
        target_qu type bapisditm-target_qu,
        target_val type bapisditm-target_val,
    currency type bapisditm-currency,
        end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
        wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
   APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.

Material Variant Matching in Sales Order Creation with ref.to Sales Order

Hi All,
We are working in Variant configuration.Our product is defined at PQD(Product, Quality & Dimension).
But, Sales Contracts are created at PQ (Product, Quality/Grade ) level only.
We have defined Variant Characteristics GRADE(ALLOY CODE),DIMENSION AND TWO MATERIALS.
MAT 1 , configurable material.
MAT 2, A Material Variant of MAT 1, Having values of GRADE = A & DIMENSION = 150 in MRP 3 view of the same.
When a Sales Order is created for MAT 1 and its characteristics values are GRADE = A, DIMENSION = 150, Material Variant type matching happens & it replaces the configurable material.
Similarly,Sales Contract is created for Configurable material MAT 1, with only GRADE = A ( As mentioned above, only quality is known at contract creation level).But, when we are trying to creart a Sales Order with reference to this Contract, we are trying to punch characteristic Value for DIMENSION = 150 also. At this stage, Materuial Variant MAT 2 is shown, but it is not replacing MAT 1.
Is this the standard behaviour or there is some solution/enhancement available.
regards,
Stuti

Dear Vijay,
in incompletion procedure we can arrange to check whether any field is empty, here data comparison is not possible.
As far as I know you can not achieve this through standard config.
To achieve your requirement, you will need to take help of an ABAPer, it can be achieved using Userexit.
ABAPer can use include MV45AFZZ
and Userexit ""USEREXIT_SAVE_DOCUMENT".
the code written in this userexit will check and compare the quantities before saving the dcument.
Logic if quantity enter is greater than the quantity mentioned in Contract show warning Message.
I hope this solves your Problem.
Regards,
Paresh

Sales Order creation with Ship to not assigned to Sold to

Hi There,
I have an issue that I am able to create an order with a Ship to which is not assigned to Sold to. i.e, The sold to accepts any ship to and not giving any error. I am giving both Sold to and Ship to together while order creation. Is it because of this? Should I enter sold to and then press enter for the list of Ship to's assigned to that? I dont find any issues in the Partner determination.
Can you help?
Thanks in advance,
Renjith

Hi Renjith,
I agree with you that SAP allows you to enter any ship to(belonging to sales org of sold-to party) for a given sold to party.
To meet your requirement, You may like to use the Userexit MV45AFZZ (Form USEREXIT_SAVE_DOCUMENT_PREPARE) to check the Ship-to while saving. Thus a comparison could be made with assigned Ship-Tos for the given Sold-to party. In case there is a mismatch throw a error message before allowing committing of save.
Your developer would be able to help you to achieve this
Please let me know if this helps
Warm regards
Harpreet

PR creation with WBS element

Hi,
I have a requirement in which I assign WBS element to sales order and later on when I run MRP for this materials it does not generate requirement for WBS element BUT generate requirement for general stock. could any body please suggest how to integrate the same. What are the setting need to be done in projects also to get this.
regards
Raj

Hi,
Are you looking for the option like, when you are running the MRP for stock items, PR should generate wrt to Project WBS Element not for plant stock.
Regards
N.Raju

Sales order creation with reference to check quantity according reference

Hi,
I create return sales order with reference. But the problem is that system can not check the quantity of creation sales order according reference quantity now. I want the system check the quantity according reference sales order quantity and do not allow to put sales order quantity more than reference sales order quantity.
Thanks.

hi,
please check the below thread
Return Quntity is more the sales Quantity?
this may help you
regards
senya

Internal order creation for wbs element

hi
I want to settle internal order for wbs element ,but while creating internal order in KO01,required Order type type not appearing mean in my company wbs element required for order type PS01,Category -20(network),so for this 20 cat. where should i create internal order.please advise me
thanks
chandu

Hi,
you can't use the order type related to category is 20, because it will use full only PS. you can create the internal order with category 10 and maintain the settlement rule said that to be settled at WBS element.
Thanks and Regards
Nagaraju SSV

Problem in Sales Order Creation with reference to Contract

Hi All,
We had enhanced Contracts (VA41) by adding fields thru append structures in VBAP and the same is provided in the "Additional Data B" tab at the item level.
The Z fields are populated with data and gets saved along with the contracts line items.
But when a sale order is created with reference to a contract, the data in the Z fields (maintained in Append Structures) of the contract are not getting copied to the line item of Sales orders.
Should a routine be necessarily written for copying Z fields from contract to Sales orders or Copy control must be set up for Z fields separately?
Any info on this would help.
Thanks,
K.V.Venkatasubramanian

Hi VJ,
The copying from Contract to Orders worked. I copied the standard routine (151) in data transfers and added the code to transfer Z fields from work area CVBAP to work area VBAP and attached the same in the copy control. It works!!!
Thanks for the help VJ.
Cheers,
Venkat

Sales Order creation with WBS Element

Similar Messages

Maybe you are looking for